Jutec Biegesysteme Gmbh & Co. Kg Biegesystem 6000 Sb/D nakup rabljenega (114.772)

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ASSEMBLY Hedpfx Aqong Ax Sotst The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm, both stationary and directly at the installation site. A powerful three-phase motor and a precision gearbox ensure a robust drive. Position detection directly on the bending axis ensures optimal bending accuracy. The bending angle can be set quickly and easily via a user-friendly, menu-driven touchscreen interface that ensures even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, each with an angle sequence of up to 8 bends per geometry. The multifunction control allows for variable adjustment of the bending speed for forward and reverse operation, and features a parametrizable overbending function to compensate for material spring-back. By using four material characteristic curves, the material is automatically overbent to the required bending angle, ensuring an accurate bending result. The "stationary pipe, rotating tool" principle ensures a minimal footprint during bending. For thin-walled pipes, sliding shoes are used to achieve wrinkle-free bends and to bend curves with minimal deformation from materials such as stainless steel and copper tubing. With the PB20 profile bending attachment, flat, square and round bars can be bent effortlessly. The KBV small radius attachment enables extremely small bending radii. POSSIBLE APPLICATIONS: • Plant construction • Hydraulic tubing • Meander bending • Prototype construction • Sanitary and heating installation TECHNICAL DATA: Bending capacity 6000SB: Ø 6 to 50 x 4 mm, single-phase 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm, three-phase 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm, three-phase 400 V • Minimum/maximum bending radius: 36 mm/280 mm • Optional large bending radii up to 500 mm • Multifunction machine controller, bending angle setting (0.1° precision) • Maximum bending angle 240° • 40 mm hexagonal shaft for quick tool change • Safety foot switch with emergency stop • Weight 110 kg OPTIONAL ACCESSORIES: • PB20 profile bender – for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm • RB43 roller bender – The RB43 is mounted on the hexagonal shaft of the bending axis. By switching to continuous bending, the bending system functions as a drive unit. • KBV small radius attachment • Special tools according to specification OUR LOCAL SERVICE FOR YOU: • Welcome to conduct test production in our in-house demo room • On-site consultation meeting • Advice and processing for leasing/financing purchases • Trade-in of your current machine • Service contracts, maintenance at your site

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta upravljanja: Krmiljeno s PLC krmilnikom, vrsta aktuacije: električni, Premer cevi (maks.): 54 mm, Dolžina cevi (maks.): 6.000 mm, Debelina stene cevi (maks.): 4 mm, Kot upogiba (maks.): 195 °, radij upogibanja (maks.): 250 mm, tlak (maks.): 250 letvica, Oprema: CE označba, centralizirani mazalni sistem, hitroizmenjevalna naprava, nožno daljinsko upravljanje, nujno zaustavitev, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with a free-standing bending head can be easily converted for demanding geometries to right- or left-hand bending. The plug-in bending tools enable quick changeovers to different tube sizes. Fast hydraulics to reduce downtimes is a key factor for series production. The clamping pressure for tube holding can be optimally adjusted. The PLC control system (expandable via USB stick) with data storage and the latest X2X interface can store a virtually unlimited number of programs for bending angles, lengths, and rotation angles for up to 50 bending sequences per tube. For monitoring springback values, a freely programmable database for up to 200 materials is available. The machine features two operating modes: In "Simple Bending", the length and rotation of each bend relative to each other are displayed automatically. In "Controlled Bending" mode, the data is stored beforehand, and during the bending process, a continuous target/actual comparison is performed. As a result, mispositioning within a tolerance window is ruled out and user-related error rates are minimized. General error messages are shown in full text on the large screen. The mandrel retraction is programmable and can automatically retract early when the bending angle is reached. The compact drive unit with detachable mandrel holder offers benefits for installation on site as well as for special designs with large tube feed, and is also available as a stationary version with a tool and mandrel rod organizer. The cost-effective alternative to a fully controlled CNC machine. POTENTIAL APPLICATIONS: • Hydraulic tubing installation • Pipeline construction • Plant construction, e.g. for chemical industry • Metal fabrication • Prototype construction • Technical Data: • Bending capacity: Ø 4 to 50 x 4 mm depending on material • Bending radius min/max: 10 mm/140 mm • Minimum bending radii: 1.5 x Ø (standard 2 x Ø) • Multifunction machine control for bending angle setting (0.1°) • Mandrel carrier lengths: 1500/3000/4500/6000 mm (special versions longer available) • Maximum bending angle: 180° • Weight: 800-900 kg (depending on configuration) • Ergonomic operation via safety foot pedal OPTIONAL EQUIPMENT: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Positioning of length and rotation via automatic braking function or manual stops operated by foot pedal • Automatic length and rotation positioning via servo motors • Pneumatic rotation stop • Pipe calculation software • Laser-assisted tool monitoring for checking tool clamping force • 10-inch touchscreen with integrated pipe calculation • Bending radii up to 250 mm • Data transfer by cable (LAN), wireless (WLAN), or USB Hodsng Exaepfx Aqtot OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our in-house demonstration room • Consulting and information session at your site • Consultation and processing of leasing/financing purchases through JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance for your machine

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, vrsta upravljanja: Krmiljeno s PLC krmilnikom, vrsta aktuacije: električni, Premer cevi (maks.): 54 mm, Dolžina cevi (maks.): 6.000 mm, Debelina stene cevi (maks.): 4 mm, Kot upogiba (maks.): 195 °, radij upogibanja (maks.): 250 mm, minimalni polmer upogibanja: 9 mm, tlak (maks.): 250 letvica, trajanje garancije: 24 meseci, Oprema: CE označba, centralizirani mazalni sistem, hitroizmenjevalna naprava, nožno daljinsko upravljanje, nujno zaustavitev, THE ECONOMICAL TUBE BENDING MACHINE FOR TIGHT BENDING RADII: The tube bending machine with a free-standing bending head can be easily converted for challenging geometries to bend both right and left. Plug-in bending tools enable quick changeovers to different tube sizes. A high-speed hydraulic system to reduce idle times is a key factor for series production. The clamping pressure for holding the tube can be optimally set. The PLC control system (expandable via USB stick) with data storage and latest X2X interface can store an almost unlimited number of programs for bending angle, length measurement, and twisting angle for up to 50 bending sequences per tube length. For monitoring spring-back values, a freely programmable database for up to 200 materials is integrated. The machine offers two operating modes: In “Simple Bending” mode, the machine automatically displays the length and rotation of each bend. In “Controlled Bending” mode, the data is preloaded and during bending, a continuous target/actual comparison is performed. This eliminates incorrect positioning within a defined tolerance window, thereby minimizing user-related error rates. General error messages are shown in full text on the large display. Mandrel retraction is programmable and can be automatically retracted early upon reaching the bending angle. The compact drive unit with detachable mandrel support offers advantages for use on site as well as for special designs with very long tube feeds and is also available as a stationary version with an organized tool and mandrel rod storage system. An economical alternative to a fully controlled CNC machine. POSSIBLE APPLICATIONS: • Hydraulic piping • Pipeline construction • Plant engineering (e.g. chemical industry) • Metalworking • Prototype construction Technical data: • Bending capacity: Ø 6 to 50 × 4 mm, depending on material • Bending radius min/max: 10 mm / 140 mm • Minimum bending radius: 1.5 × Ø (Standard 2 × Ø) • Multi-function machine control with bending angle adjustment (0.1°) • Mandrel support lengths: 1,500 / 3,000 / 4,500 / 6,000 mm (special designs available in longer lengths) • Maximum 180º bending result • Weight: 600–700 kg (depending on version) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Length and rotation positioning via automatic brake system or manual stops via foot switch Hodpondn Agofx Aqtet • Semi-automatic length and rotation positioning via servo motors • Pneumatic rotary stop • Pipe calculation software • Laser-based tool monitoring for clamping force control • 10-inch touchscreen with integrated pipe calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICES: • Test production in our in-house demo room • On-site consultation at your premises • Consultation and processing as lease/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Stanje: novo, Leto izdelave: 2025, PROFILE BENDING ATTACHMENT PB20 The ideal complement for tube bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be quickly and easily mounted onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping fixture and pulled around the bending tool. With this system, the lengths of the bent legs can be measured precisely using a length stop and can be bent with high repeatability. TECHNICAL DATA: • Bending capacity, steel 37: 100 x 10 mm, Ø 20 mm Hodpfx Aqjnh R Eketot • Numerous standard tools available • Special tools possible • Sharp-edge tools with bending radius R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° (optional) OUR SERVICE: • Welcome to test production at our in-house demo room • Consultation and information meeting at your site • Leasing/financing purchase consultation and processing via JUTEC • Trade-in of your existing machine • Service contracts and on-site maintenance

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta aktuacije: električni, Premer cevi (maks.): 35 mm, Debelina stene cevi (maks.): 2 mm, Kot upogiba (maks.): 360 °, radij upogibanja (maks.): 150 mm, minimalni polmer upogibanja: 32 mm, skupna masa: 28 kg, trajanje garancije: 12 meseci, Oprema: CE označba, nožno daljinsko upravljanje, nujno zaustavitev, THE MOBILE BENDING MACHINE WITH HIGH PERFORMANCE: The compact, mobile design allows for precise and repeatable bending, both stationary and directly on-site, for pipe diameters up to 35 mm, CU 42 mm. Hjdpjnfvx Nsfx Aqtot A powerful three-phase motor and precision gearbox ensure strong drive power. The motor speed is automatically adjusted, allowing the return movement to take place at a higher speed and reducing cycle times. A position sensor directly on the bending axis guarantees optimal bending accuracy and very high repeatability. The bending angle can be set to 0.5° easily and quickly using push buttons. The large LCD display shows the angles clearly. Storage of up to three bending angles enables efficient bending of pipes with different bending results. For transport, the compact unit and accessories can be stored cleanly and securely in robust transport cases. The “stationary pipe and rotating tool” design principle ensures minimal space requirements when bending. For thin-walled pipes, sliding shoes are used to allow wrinkle-free bending and to form bends with minimal deformations, e.g., in stainless steel and copper pipes. With the PB20 profile bending attachment, flat, square, and round bars can be bent easily. POSSIBLE APPLICATIONS: • Hydraulic piping • Prototype construction • Sanitary and heating installations • Technical data: • Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material • Bending radius min/max: 36 mm/150 mm • Precise digital bending angle adjustment: 0.5° • Maximum 180º bending result; for special applications, continuous operation possible • 40 mm hexagonal shaft for quick tool changes • Safety footswitch with emergency stop function • 230 V AC connection • Weight: 29 kg • Frequency inverter and three-phase motor • 3 storable bending angles OPTIONAL ACCESSORIES: • Sliding shoe holder • Double roller mount • Profile bender PB20 – for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm • Tripod stand • Machine case • Tool case • Small bending device KBV • Special tools upon request OUR SERVICE: • Welcome to test production at our premises in the demo room • Consultation and information session at your site • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance at your location

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: The compact bending machine enables precise and repeatable bending of pipes up to an external diameter of 100 mm, both stationary and directly at the installation site. Transport is easy using a pallet truck or the optional rollers. A robust three-phase motor and a precision gearbox provide high-performance drive power. The machine impresses with its compact and slim design and a very open bending area. Precise position sensing directly on the bending axis ensures optimal bending accuracy. The bending angle is quickly and easily set via a convenient, menu-guided user interface in 14 languages with touchscreen control, guaranteeing highly intuitive operation. For complex bending tasks, up to 100 bending programs can be stored, each featuring a sequence of up to 8 bends per geometry. Thanks to the multifunctional control system, both forward and return bending speeds can be variably set, and an adjustable overbend function compensates for the material’s springback. With the help of four material characteristic curves, the machine automatically overbends the material to the required angle, delivering precise results. The “stationary tube, rotating tool” principle minimizes the required workspace. For thin-walled tubes, sliding shoes are used to ensure wrinkle-free bends and to achieve minimal deformation—ideal for stainless steel and copper pipes. Hedendk N Aopfx Aqtot With the PB20 profile bending attachment, flat, square, and round bars can be bent without issue. Using the small-radius bending device (KBV), extremely small bending radii are possible. POTENTIAL APPLICATIONS: • Plant construction • Hydraulic piping • Serpentine bending • Prototyping • Sanitary and heating installation • Shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material Three-phase 400 V • Bending radius up to 500 mm • Multifunctional machine control with bending angle adjustment (0.1°) • Maximum bending angle 240° • Safety foot switch with emergency stop • Weight: 600 kg OPTIONAL ACCESSORIES: • Adapter system for tools from the 3000/6000 series, with bending radius from 45 mm, incl. 40 mm hex shaft • Profile bender PB20 – for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm • Small-radius bending device KBV • Special tools according to customer specifications • Software customization for special tasks OUR SERVICES: • Welcome to carry out test production in our in-house demo room • Consultation and information meeting at your site • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, maintenance at your site

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, številka stroja/vozila: 1018, vrsta upravljanja: Krmiljeno s PLC krmilnikom, stopnja avtomatizacije: ročni, vrsta aktuacije: električni, Premer cevi (maks.): 50 mm, Dolžina cevi (maks.): 6.000 mm, Debelina stene cevi (maks.): 3 mm, Kot upogiba (maks.): 195 °, radij upogibanja (maks.): 250 mm, trajanje garancije: 24 meseci, Oprema: CE označba, hitroizmenjevalna naprava, nožno daljinsko upravljanje, nujno zaustavitev, THE MANDREL BENDER WITH MANUAL CLAMPING This mandrel bending machine with manual eccentric quick-release clamping for tube fixation enables efficient bending operations. The compact drive unit with detachable mandrel support offers advantages during on-site installation. Direct position detection on the bending axis ensures optimum bending precision. The bending angle can be set quickly and easily via a convenient touchscreen controller with a user-friendly, menu-driven interface. The advanced control system allows for two speed settings as well as a configurable overbending feature for compensating material springback. The bending process is significantly shortened by the automatic “return” movement at the end of the bend. For more complex bending tasks, bending programs can be stored, offering up to 50 bend angles per geometry. An almost unlimited number of programs and up to 200 materials can be saved to the controller or a USB stick. Plug-in bending tools allow for fast changeover to different tube sizes. For challenging geometries, the machine can be converted as standard to either right-hand or left-hand bending directions. The open bending unit also allows for bends such as railing frames with only a single weld seam. Optional PC calculation software determines the cut length for the entire geometry as well as the feed path, twist, and bending angle for every individual bend. The mandrel retraction is programmable and can be automatically triggered once the predefined bending angle is reached. POSSIBLE APPLICATIONS: • Plant construction, e.g. chemical industry • Hydraulic piping • Prototyping • Pipeline construction TECHNICAL DATA: • Bending capacity: Ø 6 to 50 mm • Minimum/maximum bending radius: 10 mm / 140 mm • Bending radii: 2 x D • Multifunction machine control for bending angle adjustment (0.1° accuracy) • Mandrel support lengths: 1500/3000/4500/6000 mm (special versions are available with longer lengths) • Maximum bending result: 180º • Weight: 300-500 kg (depending on configuration) Optional accessories: • Automatic mandrel lubrication (minimal quantity) • Digital measuring system for length and twisting (resolution 0.1) • Remote control of all functions at the carriage (rotational and length stop) • Bending radius up to 250 mm • PC tube calculation software Hedpsnfvy Ujfx Aqtst OUR SERVICES: • Welcome to trial production in our in-house demo room • Consulting and informational meeting at your premises • Consultation and processing of leasing/financing purchase through JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Stanje: novo, Leto izdelave: 2025, THE PRACTICAL HAND TUBE BENDER: The compact, mobile design allows for precise and consistently repeatable bending operations in a bench vice. Operation is performed via a screw-in handle. A lockable setting ring ensures consistent, repeatable bending angles. The easily exchangeable plug-in tool system makes tool changes straightforward. The 'stationary tube and rotating tool' principle enables bending with minimal space requirements. For thin-walled tubes, slide shoes are used for crease-free bending, enabling the production of bends with minimal deformation from materials such as stainless steel and copper tubes. The optional hexagonal drive version allows, in addition to vice operation, the use of the drive force from the 3000 and 6000 bending systems. The KBV can simply be mounted onto the machine’s bending shaft for this purpose. POSSIBLE APPLICATIONS: Hedpfxsng Amke Aqtst • Hydraulic piping installation • Prototype fabrication • Plumbing and heating installation TECHNICAL DATA: • Bending capacity: Ø 6 to 18 mm • Manual bend angle limitation • Maximum bending angle: 180º OPTIONAL ACCESSORIES: • KBV with hexagonal drive for bending on models 3000 or 6000 • Machine case • Length stop OUR LOCAL SERVICE FOR YOU: • Welcome to test production at our on-site demonstration room • Consultation and information meeting at your facility • Consultation and processing of lease/financing purchase through JUTEC • Trade in of your current machine • Service contracts and on-site maintenance

Stanje: novo, Leto izdelave: 2025, THE PRECISE 3-ROLL BENDING MACHINE The development of this compact and mobile horizontal bending machine was clearly focused on the production of dimensionally accurate spirals, such as handrails for spiral staircases. This represents the highest level of complexity, as two interdependent variables (radius and pitch) must come together in a single bend to create a precise geometry. The interaction between pipe calculation on a PC, implementation on the bending machine, and monitoring with measuring devices, including final corrections of bending parameters, ensures accurate bending. With just a few simple entries in the PC pipe calculation program, the local printer provides a printout supporting the calculation of all necessary bending and correction data for machine operation. A new, powerful drive concept enables stepless adjustment of the bending speed, requiring only a 230 V (single-phase) power connection. Both hardened steel tools and surface-friendly, hard plastic tools are available. To ensure optimal feed, even for tight bending radii, all three bending rollers are driven. The drive concept proves its worth in daily heavy-duty use, whether working on flat surfaces or bending pipes and profiles. Customers of the 4800, 5000, and 6000 bending systems have the option of purchasing the roll bending unit without the drive. The roll bending unit, designated RB43, can be adapted to the 4800, 5000, and 6000 systems via the bending shaft. In this configuration, the machines serve as the drive unit. POSSIBLE APPLICATIONS: • Handrails/underrails for spiral staircases • Large pipe and profile bends • General metal construction TECHNICAL DATA: • Bending capacity: Ø 10 to 60 mm • Minimum bending radius: 300 mm at Ø 42.4 mm • Bending direction: right and left • Digital adjustment for radius and pitch • Safety foot switch with emergency stop function • Maintenance-free, robust three-phase motor • Site-ready 230 V connection • Weight: 280 kg OPTIONAL ACCESSORIES: • Support roller – for stabilization • Lifting roller – to produce controlled pitch • MGR – Measuring device for determining the correct radius • MGV – Measuring device for determining the correct pitch based on twist • MPW – PC calculation program for determining the correct bending values • RB4303 – Universal bending tool for profiles up to 60 mm in height • Tools for special profiles Hsdong A R Sopfx Aqtot OUR SERVICE FOR YOU ONSITE: • Welcome to test production at our facility in the demo room • Consulting and information session at your location • Consultation and processing of leasing/financing purchases • Service contracts, onsite maintenance

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta upravljanja: Krmiljeno s PLC krmilnikom, vrsta aktuacije: električni, Premer cevi (maks.): 100 mm, Dolžina cevi (maks.): 6.000 mm, Debelina stene cevi (maks.): 8 mm, Kot upogiba (maks.): 195 °, tlak (maks.): 250 letvica, trajanje garancije: 24 meseci, Oprema: CE označba, centralizirani mazalni sistem, hitroizmenjevalna naprava, nožno daljinsko upravljanje, nujno zaustavitev, THE ECONOMICAL MANDREL BENDING MACHINE FOR TIGHT BEND RADII This bending system offers solutions for complex geometries with standard radii of 2xD for tube dimensions from 15 to 100 mm. Depending on material quality and wall thickness ratio, radii as tight as 1.5xD can be reliably achieved in series production. With a tool height of 120 mm, there is also ample versatility for special profiles. The highly precise and powerful electric drive of the bending axis, together with the robust and rigid construction of the mandrel carrier and bending arm, ensures top-quality bending results. The plug-in bending tools enable quick setup changes for different tube sizes. The clamping pressure for the tube can be optimally adjusted. The PLC control (expandable via USB stick) with data memory and the latest X2X interface can store an almost unlimited number of programs for bending angles, length, and rotation, managing up to 50 bending steps per tube. To monitor springback values, a freely programmable database for up to 200 materials is available. The control offers two operating modes: In "Simple Bending", length and twist between the bends are automatically displayed. In "Controlled Bending" mode, data is pre-stored, and a continuous target/actual comparison is performed during bending. Also available with pneumatic rotary stop or with geared-assisted length and rotation positioning. POSSIBLE APPLICATIONS: • Plant engineering, e.g., chemical industry • Hydraulic piping • Metal construction • Prototype construction • Pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mm Bending capacity 9000: Ø 20 to 90 x 5 mm (depending on material) • Min./max. bending radius: 40 mm / 250 mm • Min. bending radii: 1.5 x Ø (standard 2 x Ø) • Multifunctional machine control for bending angle adjustment (0.1°) • Mandrel carrier lengths: 3000 / 4500 / 6000 mm • Maximum bending angle: 180º • Weight: 1,600–3,200 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Larger bending radius up to 300 mm • Length and rotation positioning via automatic brake or manual stops using foot switch • Semi-automatic length and rotation positioning via servo motors • Automatic tool retraction • Tube calculation software • 10-inch touchscreen with integrated tube calculation • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICES: • Welcome to test production in our in-house demo room • Consulting and information session at your site Hjdpfxenh R Sue Aqtst • Consultation and transaction as leasing/finance purchase through JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Stanje: dober (rabljeno), Leto izdelave: 1999, ESTA Spänesog-SB 8151, sesalnik za žagovino Visoko zmogljiv industrijski sistem za odsesavanje, proizvajalec ESTA, model Spänesog-SB 8151. Ta sistem je idealen za delavnice za odsesavanje žagovine in prahu (npr. pri obdelavi kovin ali lesa). Hsdpfxoznibwj Aqtet Tehnični podatki naprave Proizvajalec: ESTA Apparatebau GmbH & Co. KG Model/tip: Spänesog-SB 8151 Napetost (V): 400 V Moč (kW): 2,2 kW Intenzivnost toka (A): 4,6 A Frekvenca (Hz): 50 Hz Stopnja zaščite: IP 54 (zaščiteno pred prahom in brizganjem vode) Dodatne izdelke – nove in rabljene – najdete v naši spletni trgovini! Stroški mednarodne dostave na zahtevo.

Leto izdelave: 2022, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3352, RAMPF dozirna naprava z mešalnim sistemom MS-S (statični) Uporabljeni material: Rampf RAKU PUR 21-2080-1 komponenta A in komponenta B Dozirna glava je bila nadgrajena z Y-vozičkom. - Ročni pomični mehanizem za mešalni sistem - RAMPF mešalni sistem MS-S (statični) - Nadzor tlaka za komponenti A + B - Tlačna posoda za material 50 l za komponento A - Merjenje nivoja za komponento A + B - Kroženje materiala do dozirne črpalke za komponenti A in B - Evakuacija materiala za komponento A - Vakuumska črpalka 25 m³/h - Posoda za odpadke 60 l s cevjo -> Lovilne posode so bile zamenjane z mobilnimi posodami. - Voziček za posodo za odpadke ali spiranje - Ogrodje za posode/strojno ogrodje, trojno - Delovna miza cca 1.400 mm x 500 mm s ploščo Hedpfx Ajzgck Noqtst - Prečrpovalna postaja za pokrovček sodčka komponente A - Prečrpovalna postaja za sodček s čepom komponente B - Dozatorsko krmiljenje (Siemens PLC-krmiljenje na osnovi S7-300) - Precizna batna dozirna črpalka za komponenti A in B - EKDP A komponenta 257 ccm - EKDP B komponenta 64 ccm --> 1 x rezervni EKDP A in EKDP B sta vključena. Ta sta bila pri Rampf celovito obnovljena v zameno (glej sliko). Opomba: Zalivna naprava se nahaja na naši lokaciji v Avstriji.

Stanje: rabljeno, Leto izdelave: 2011, številka stroja/vozila: E1053A0497, skupna masa: 850 kg, Na prodaj je TRUMPF TruDisk 4002 (4C) disk laserski sistem / laserski vir, vključno z ločeno hladilno enoto KLH RW 20/0 SK. Tehnični podatki laserja: * Proizvajalec: TRUMPF Laser GmbH + Co. KG * Tip: TruDisk 4002 (4C) * Letnik izdelave: 01/2011 * Laserska moč: 4.000 W * Številka opreme: E1053A0497 * Napetost: 380 V (-10 %) do 460 V (+10 %), 3 AC + PE * Frekvenca: 50–60 Hz * Priključna moč: 23 kW / 25 kVA * Nazivni tok: 34 A pri 400 V * Stopnja zaščite: IP54 * Teža: pribl. 850 kg Hladilna enota: * Proizvajalec: KLH Kältetechnik GmbH * Tip: RW 20/0 SK * Letnik izdelave: 2017 Hjdpjzvqfyofx Aqtjt * Številka dela: E123223000AA * Serijska številka: 17KLH00670 * Napetost: 400/460 V * Frekvenca: 50/60 Hz * Hladilno sredstvo: R134a * Količina hladilnega sredstva: 3,7 kg TruDisk 4002 se prodaja skupaj s prikazano hladilno enoto KLH. Ogled je možen po dogovoru. Dodatne tehnične informacije in slike so na voljo na zahtevo.

Leto izdelave: 2020, stanje: novo, Naslov Strassburger Filter SF400oDEC/30S Integra – pločasta filter preša iz nerjavečega jekla – leto proizvodnje 2020 – NOVA / nerabljena Kratka predstavitev Naprodaj so nerabljene, originalno zapakirane pločaste in okvirne filter preše priznanega nemškega proizvajalca Strassburger Filter GmbH + Co. KG. Naprave so v novem stanju, nikoli niso bile uporabljene in so originalno zapakirane v tovarni. Proizvajalec Strassburger Filter GmbH + Co. KG (Nemčija) Model / Tip SF400oDEC/30S, Integra-format Označba stroja: FI6722 – FP PRE 1 Leto proizvodnje 2020 Serijska številka npr. 032003303920 (na voljo so tudi druge serijske številke) CE-označba Da Stanje Novo / nerabljeno Originalno zapakirano Nikoli nameščeno, nikoli uporabljeno v proizvodnji Lagerartikel (izdelek na zalogi) Razpoložljiva količina Na voljo so 3 enake naprave Nova cena Nova cena 94.000 € na kos Izvedba / Material Popolnoma iz nerjavečega jekla Pločasta in okvirna filter preša Ploče z tesnilom (gasketed plates) Izvedba za farmacevtsko / biotehnološko uporabo Hidravlična zapora, vključno s hidravlično agregatno enoto V skladu s CE-standardi Tehnični podatki Hjdpsx Ihufjfx Aqtet Format plošče: 425 × 400 mm Število filtrirnih komor: 28 Skupna filtrirna površina: približno 3,4 m² Skupna prostornina: približno 13,6 litrov (100 %) Maksimalni delovni tlak: 6 bar Maksimalna delovna temperatura: 95 °C Možnost CIP/SIP čiščenja (čiščenje do 121 °C) Dimenzije in teža Dolžina: približno 1.649 mm Širina: približno 600 mm Višina: približno 1.145 mm Teža filtrirnega okvirja: približno 480 kg Teža paketa plošč: približno 120 kg Paket plošč 14 filtrirnih plošč 13 filtrirnih okvirjev 1 končni okvir 1 pregradna plošča 28 filtrirnih plasti na nastavitev Hidravlika in pogon Hidravlična zapora Hidravlična agregatna enota je vključena Moč motorja: 1,5 kW Električni priključek: 400 V / 50 Hz Napetost ventila: 24 V DC Potreba po stisnjenem zraku: 3,0 bar Priključki Vhodni in izhodni priključki za izdelek DN25 Odplinjačni / izpustni priključki DN15 Priključki v skladu s standardom DIN 11864-2 Na voljo je lovilna posoda za kapljanje Področja uporabe Farmacevtska proizvodnja Biotehnologija Kemijska industrija Predfiltracija (PRE-Filtration) Postopki oborževanja in čiščenja Lokacija Nemčija Po dogovoru je možen ogled Na voljo takoj

Leto izdelave: 2021, stanje: novo, Aluminium flat belt conveyor without substructure Conveyor length: 4000 mm Drive roller: knurled Return roller: crown-faced, turned Our core competency lies in delivering exactly what the customer truly needs. We work in close cooperation with our customers to develop customized, application-specific solutions and supply corresponding systems manufactured in-house. Please feel free to contact us by phone to find the right solution for your application. PVC conveyor belt Conveyor belt type EM 15/2 0+17 PVC white, FDA compliant according to EU10/2011 Belt width: 500 mm (external) Wave edge welded on both sides, 40 mm high Hodshfwcbepfx Aqtst T-30 cleats – 400 mm pitch * Antistatic due to conductive threads in the running side fabric Endless welded with stepped finger splice Food-grade certificate included V2A stainless steel support plate, full-surfaced Drive: Motor approx. 1.1 kW * Optionally controllable via frequency inverter Connection: 220/400 V

Stanje: dober (rabljeno), Leto izdelave: 2019, Mössner Rekord SSF 801 tračna žaga Najzmogljivejša tračna žaga Mössner – uporablja se povsod tam, kjer so zahtevane najvišje zmogljivosti. Absolutna zastavonoša med navpičnimi visoko zmogljivimi tračnimi žagami. Ta stroj zagotavlja maksimalno natančnost, izjemno miren tek in brezkompromisno dolgo življenjsko dobo pri neprekinjeni industrijski uporabi. Osnovna oprema tračne žage: - Nosilec tračne žage iz stabilne sive litine - Hitrosti rezanja nastavljive preko frekvenčnega pretvornika in trifaznega motorja s potenciometrom - 2-stopenjski menjalnik ali brezstopenjsko nastavljive hitrosti rezanja s prirobnico in frekvenčnim pretvornikom - Ročni napenjalni mehanizem z hidravličnim prikazom - Nagibna delovna miza – desno do 30°, levo do 15° - Izmenljiva aluminijasta kolesa z oblogo iz trde gume - Zgornje kolo nastavljivo - Varnostno stikalo na vratih kolutov - Barva: RAL 7035 svetlo siva, vrata RAL 5005 signalno modra Tehnični podatki: Proizvajalec: Mössner (August Mössner GmbH + Co. KG) Model: Rekord SSF 801 Premer koles: 800 mm Najv. širina reza (izteg): 785 mm Najv. višina reza: 670 mm (opcijsko razširljivo do 800 mm) Velikost mize: 960 × 1000 mm Najv. obremenitev mize: 750 kg Moč motorja: 11 kW Hitrost rezanja z menjalnikom: 26 – 180 m/min in 290 – 2000 m/min Hitrost rezanja s prirobnico: 500 – 2000 m/min Teža stroja pribl.: 2.300 kg Dimenzije (D x Š x V): 2240 x 1080 x 2900 mm Leto izdelave: 2019 Nova cena: 54.000,- € "Vse iz ene roke: z veseljem vam ponudimo tudi ustrezno bančno financiranje za vaš projekt." Hjdpfxszc Uvws Aqtjt komplett-konzept.leasingo.de Oglejte si še ostale izdelke – nove in rabljene – v naši spletni trgovini! Mednarodni stroški pošiljanja na zahtevo!

Stanje: novo, Leto izdelave: 2025, Pressure blast cabinet DSK 20.10.09 with trolley and rotary table. Hodpofnh Rvofx Aqtet Width: 2050mm Depth: 935mm Height: 955mm Pneumatic lifting door with the advantage that the blasting media falls back into the cabinet when the door is opened, instead of onto the floor. If you have any questions about technical specifications, please contact us in writing or by phone. Our machines have been manufactured at the Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG with their long-standing known contacts.

Stanje: novo, Leto izdelave: 2026, Tumble belt blast machine with blast wheel – 7.5 kW direct-drive disc turbine with 8 throwing blades. Belt width 700 mm and diameter 600 mm. Hsdsg S Rt Eopfx Aqtot

Stanje: novo, Leto izdelave: 2026, Pressure blasting cabinet, 4-axis controlled, for cleaning moulds, steel rings, die casting moulds, tyre moulds, press tools, etc. The travel path of the blasting nozzles is freely programmable. Includes 2 automatic nozzles and 1 manual blasting nozzle for post-cleaning of parts. Fitted with a Hardox turntable and screw conveyor for durable operation of the blasting system. Hsdpfxjdrtanj Aqtjt For any technical questions, please contact us in writing or by phone. The machines are manufactured at our Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with our long-standing, well-known representatives.

Stanje: novo, Leto izdelave: 2026, Vis sans fin de transport d'abrasif de 5 m avec capot doseur pour installation en tant que vis de transfert transversal vers l'élévateur à godets en bout de hall (insertion d'abrasif sur toute la largeur du hall à l'aide d'un chariot élévateur). - 5 m + sortie vers l'élévateur à godets, vis à ailettes pleines Ø250 mm avec spires de 5 mm d'épaisseur. - Peut servir de réservoir d'abrasif. La grenailleuse se réapprovisionne automatiquement si nécessaire via une sonde de niveau. - Selon la profondeur d'installation, permet d’effectuer des opérations de grenaillage jusqu'à 24 heures sans nettoyage du hall. - Nettoyage du hall possible en 10 minutes avec un chariot élévateur ou un chargeur sur pneus. - Très faibles coûts d'entretien et de réparation par rapport à un plancher convoyeur complet. - Particulièrement adaptée pour des pièces très lourdes. Hedpfsynz Idsx Aqtst - Coûts d’acquisition inférieurs à ceux d’un plancher convoyeur complet. - Coûts de fondation réduits par rapport à un plancher convoyeur complet. - Peut être insérée sur toute la largeur du hall, contrairement à une fosse de balayage. - Garantie longue durée très élevée.

Stanje: novo, Leto izdelave: 2025, Blast cabinet DSK 1102 S with movable carriage and rotary table. Width: 1500 mm, Depth: 1235 mm, Height: 995 mm Pneumatic lifting door. If you have any questions regarding technical specifications, please contact us in writing or by phone. The machines are manufactured at our site in Grossenlueder since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG with the long-standing, well-known points of contact. Hodpfedhl Ngox Aqtjt

Stanje: novo, Leto izdelave: 2025, Turbine rotary table system Diameter: 1500 mm; 2 x 7.5 kW blast wheels If you have any questions regarding technical specifications, please contact us in writing or by phone. Hjdpfx Ajdtq Ansqtot The machines are manufactured at the Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with our long-standing, well-known contact persons.

Stanje: novo, Leto izdelave: 2025, Kontejnerska peskalna naprava. 5,89 x 2,35 x 2,69 m Kontejnerske peskalne naprave z vgrajenim strojnim prostorom. Plosko transportno dno, polžasti transportni sistem, vedro dvigalo, priprava abraziva, tlačni peskalni kotel 100l, filtrirna naprava, odsesovalno dno, odprtina kot ročna peskalna kabina. Za morebitna vprašanja o tehničnih podatkih nas kontaktirajte pisno ali po telefonu. Osnova strojev je proizvodnja na lokaciji Grossenlüder od leta 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG z dolgoletnimi priznanimi kontakti. Slike lahko vsebujejo dodatno opremo. Hodpfodkbvcsx Aqtet

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Blast container for blasting with glass beads, ceramic, corundum, chilled iron grit, garnet sand, etc. The blast container features a fully covered screw conveyor floor and a genuine abrasive recycling system. No more sweeping, vacuuming, or shoveling of abrasive in the blast chamber while processing your workpieces, thanks to our recirculation system. Abrasive cleaner windsifter with four-way adjustment: airflow volume, flow speed, extraction proximity to the abrasive, and abrasive bed height setting. Electric vibrating screen for continuous coarse separation. Bucket elevator with trapezoidal thread spindle for belt tensioning and speed monitoring. Container lining made of 4mm, 70 Shore fabric-reinforced rubber guarantees a service life of up to 30 years when used correctly. The container can be fully opened from the side for simple forklift loading. The container can be upgraded with crane roof hatch, floor reinforcement, or lateral blast chamber extension. For stainless steel blasting, the container can be equipped with an actual magnetic drawer or drum-type magnetic separator, as well as a stainless steel grating. Filter unit with easy-maintenance access doors, big bag dust collection, secondary filter H13/14, and silencer. Blast pot with pressure regulator and water separator. The container is characterized by its reliability and easy maintenance. All system components are easily accessible at the rear of the container. Only 4 ball bearings on the screw conveyor floor and 4 ball bearings on the bucket elevator. Hodpfx Aouwlzyjqtjt Special warranty of 5 years included on all essential components of the blasting system. Safety features: door/gate limit switches, dead-man control, emergency lighting, blast chamber viewing window, emergency stop inside the blast chamber and on the control cabinet, quick-release pressurized vessel vent.

Stanje: novo, Leto izdelave: 2026, Peskalni voziček 5t z baterijskim pogonom za peskalno napravo - Nosilnost 5t Hsdpfoyyxidex Aqtet - Za tirni sistem - Baterijski pogon - Daljinsko upravljanje - Dimenzije: dolžina 3000 mm, širina 1000 mm - Površine za namestitev držal za obdelovance