Gesamtlänge: 2.455 Mm / Höhe: 315 Mm Für Doppelregalreihe / Gelb nakup rabljenega (84.318)

Stanje: dober (rabljeno), Your contacts at our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank We are offering a used rack impact guard for sale. Suitable for a double rack row: 2 x 1,100 mm rack depth + 200 mm rack connector Scope of delivery: 01x Impact guard rail, used Material color: yellow Total length: approx. 2,455 mm Total length without base plate: approx. 2,400 mm Suitable for a double rack row Total depth: approx. 150 mm Total height: approx. 315 mm Profile dimensions: U 100 x 50 x 10 mm Material thickness: approx. 8 mm Hole diameter: approx. 13 mm Itodpfsdz Uxqex Al Njf Required floor anchors: 8 pcs Our range of services at a glance: (Prices upon request) Assembly and installation Our general assembly conditions must be observed Rack inspection Rack inspection according to DIN EN 15635, carried out in accordance with BGR 234 visual inspection requirements for all rack systems Delivery with our own fleet (unloading not included)

Stanje: dober (rabljeno), Note: The collision protection guardrails may show scratches, minor dents, or other signs of damage. Included in the scope of delivery: 01x Collision protection guardrail, used Material color: yellow/black Design: solid wall Total length: approx. 1,380 mm Clear width: approx. 1,205 mm Total depth: approx. 205 mm Total height: approx. 350 mm Material thickness: approx. 5.00 mm Number of mounting holes: 04 pcs. Mounting hole Ø: approx. 18 mm Itjdsnwnmyopfx Al Nef Weight | per piece: approx. 33.820 kg Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Should you require transport or shipment of this item, additional costs will apply. The amount of these costs depends on the place of delivery and the scope of the order, and can be requested from us separately.

Stanje: dober (rabljeno), Note: The collision protection guardrails may show scratches, minor dents or other signs of wear. Included in the scope of delivery: 01x Collision protection guardrail, used Material colour: yellow/black Version: solid-wall Total length: approx. 2,700 mm Clear width: approx. 2,505 mm Total depth: approx. 240 mm Total height: approx. 410 mm Material thickness: approx. 4.00 mm Number of mounting holes: 08 pcs. Hole Ø: approx. 18 mm Weight | per unit: approx. 52.840 kg Your contacts in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information on the item: This item is only available for collection. Should transport or shipping of this item be required, additional costs will apply, which can be specified separately depending on the place of delivery and the scope of delivery. Itodpfxjnwmn He Al Nef

Stanje: dober (rabljeno), Note: The collision protection guardrails may display scratches, minor dents, or other damage. Scope of delivery includes: 01x collision protection guardrail, used Material color: yellow/black Design: solid-wall construction Square tube: 02 pcs Square tube dimensions: 80 x 80 x 3.00 mm Total length: approx. 2,690 mm Clear width: approx. 2,500 mm Total depth: approx. 235 mm Total height: approx. 405 mm Material thickness: approx. 4.00 mm Number of drill holes: 04 pcs Drill hole diameter: approx. 20 mm Weight | each: approx. 54.820 kg Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipment of this item is desired, additional costs will apply. These costs may vary depending on the delivery location and scope of delivery, and can be requested from us separately. Ijdpfonwmuwsx Al Njtf

Stanje: kot nova (razstavni stroj), The scope of delivery includes: 01x Upright protector, second choice Material color: yellow Total height: approx. 1,000 mm Total width: approx. 128 mm Internal width: approx. 120 mm Material thickness: approx. 4.00 mm Weight: approx. 5.23 kg | each Per side: 2 mounting holes, Ø approx. 11 mm Itjdpfolikw Hex Al Nof Distance center-to-center of holes: approx. 900 mm

Stanje: zelo dobro (rabljeno), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Scope of delivery includes: 01x Post protector, used Material colour: yellow Design: V-shape Overall height: approx. 750 mm Overall width: approx. 100 mm Internal width: approx. 93 mm Itedpfxoh Ei Uds Al Njf Overall depth: approx. 60 mm Material thickness: approx. 3.50 mm Grid / hole spacing: approx. 300 mm Number of holes: 06 pcs. (03 pcs. per side) Hole diameter: approx. 11 mm 06x Hexagon bolt: M8 x 35 mm 06x Lock nut: M8 06x Washer: M8 General information about the item: This item is offered for collection only. Delivery or shipment beyond this is subject to additional costs, which can be requested from us separately depending on the delivery location and scope of delivery. Our range of services at a glance: (Prices upon request) Assembly, installation Please observe our general assembly conditions. Racking inspection Racking inspection according to DIN EN 15635, carried out in accordance with the requirements of BGR 234. Visual inspection for all racking systems. Delivery with our own fleet (without unloading)

Leto izdelave: 2018, stanje: novo, Your contacts at our company: Itsdpfxsd Rxyrj Al Nof Mr: Andre Evering Mr: Marcel Brahms Mr: Simon Blank We are offering you a new post protector from the manufacturer Mecalux for purchase. The post protector is suitable for frame profile widths up to max. 120 mm. The scope of delivery includes: 01x Post protector, new Material color: orange For upright profile width: approx. 120 mm Total height: approx. 600 mm Total width: approx. 132 mm Inner width: approx. 126 mm Total depth: approx. 70 mm Deflector: approx. 55 mm Material thickness: approx. 3 mm Hole dimensions: approx. 9 x 14 mm Hole spacing (center-to-center): approx. 400 mm Weight per piece: approx. 4.298 kg 04x Hexagon bolt: M8 x 25 mm 04x Lock nut: M8 04x Washer: M8 Our range of services at a glance: (Prices on request) Assembly and installation Our general assembly terms and conditions apply Racking inspection Rack inspection in accordance with DIN EN 15635 carried out according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own vehicle fleet (without unloading)

Stanje: skoraj kot novo (rabljeno), We offer you here a second-choice deep beam (Tiefensteg) from manufacturer SSI Schäfer for sale. The deep beam is suitable for an upright depth of 1,250 mm and a maximum cross beam width of 55 mm. The scope of delivery includes: 01x deep beam, used Manufacturer: SSI Schäfer Material color: RAL 5010 blue Total length: approx. 1,264 mm for upright depth: approx. 1,250 mm Cross beam support: approx. 63 mm Clear support width: approx. 1,130 mm Profile dimensions: U-profile 50x50x3 mm Weight: 4.58 kg | each General information about the item: Iedpfx Aeh Et Aqjl Nstf This item is only available for collection. Delivery or shipping of this item is subject to additional costs, which can be provided upon request depending on delivery location and scope.

Stanje: dober (rabljeno), Included in delivery: 01x Upright protector, used Material color: yellow Total height: approx. 970 mm Total width: approx. 140 mm Internal width (incl. foam): approx. 93 mm Ijdpfxsikvktj Al Nstf Internal width (without foam): approx. 134 mm Total depth: approx. 60 mm Material thickness: approx. 3.00 mm Hole diameter: approx. 11 mm Hole pattern (HxW): approx. 700 x 50 mm Unit weight: approx. 5.87 kg - Supplied without mounting material

Stanje: dober (rabljeno), Your contacts at our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank We are offering here a used column protection guard by the manufacturer Gemac for sale. The column protection is suitable for a frame profile width of max. 90 mm. The scope of delivery includes: 01x Column protection guard, used Material color: cream white Design: V For upright profile width: approx. 90 mm Total height: approx. 600 mm Total width: approx. 113 mm Deflector height: approx. 60 mm Material thickness: approx. 4 mm Hole Ø: approx. 8 mm Leg dimensions: approx. 85 x 85 mm Weight / piece: approx. 4.888 kg 02x Mounting plates, used Material color: cream white Dimensions: 130 x 91 mm (W x D) Material thickness: approx. 7 mm 04x Hexagon bolts: M10 x 35 mm 04x Lock nuts: M10 04x Washers: M10 Overview of our services: (Prices on request) Itjdpfx Alofdqkaj Njf Assembly and installation Please note our general assembly conditions Racking inspection Racking inspection according to DIN EN 15635 carried out in compliance with the requirements of BGR 234 visual inspection for all types of racking systems Delivery using our own fleet (unloading not included)

Stanje: dober (rabljeno), Included in the delivery: 01x Shelf connector, used Colour: blue Manufacturer: Polypal For shelf spacing: approx. 545 mm Total length: approx. 610 mm Profile dimensions: U 50 x 15 mm Weight: approx. 0.650 kg | per piece Isdpfx Aoi Igcajl Nstf General information about the item: This item is only offered for collection. If transport or shipping is required, this will incur additional costs, which can be individually requested from us depending on place of delivery and order volume.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Itjdpfsmhhypex Al Nef Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg Iedpfxemhh Dhs Al Nstf - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized Itedpfemhh Dzjx Al Njf - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standards - Technical telephone support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. When installing outdoors, loading capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening materials (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts available for reorder and extensions can be supplied at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Ijdpfxemhhx Ij Al Notf Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fixing materials (without floor anchors) - With assembly instructions and C4 load labels as per DIN standard - Professional telephone advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with pre-delivery notification. Material is packaged for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowels, and able to accommodate the applied loads. Floor quality, load-bearing capacity, and any required official permits are to be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to the German employers’ liability insurance association, it is recommended that the rack uprights have a minimum 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard type - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms as standard (=4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable transport with prior notice before delivery. Ijdpfx Alomhhyae Netf The material is efficiently packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The foundation must be made of concrete, level, suitable for dowelling, and able to bear the applied loads. The suitability and load-bearing capacity of the floor, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to a wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the upright has at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard Iedjh Ek Daspfx Al Njtf - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times Itsdpfx Aemhh Anjl Nef - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) Itedpfx Aljmhhf Ss Nof - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Materials are sensibly packaged to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Screw system in hot-dip galvanized design: Pickup price: Robust steel construction made of IPE sections Ijdpfxsmhhl Ho Al Nstf Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section: 1,200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Each upright equipped with 3 bolted cantilever arms, usable depth 1,200 mm, standard (equals 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Mounting hardware included (ground anchors not included) Supplied with assembly instructions and C4 load capacity labels according to DIN standards

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever racking system, powder-coated (RAL 7016 Anthracite): Scope of delivery: - 4 uprights, height 4,200 mm with base part, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm - Longitudinal and diagonal bracing for 1,300 mm upright spacing (system length 4,000 mm) - Fastening materials (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered; extensions possible at any time) Ijdpfxjmidyfs Al Netf - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface coated in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with usable depth of 1,200 mm - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms as standard (= 4 storage levels) - Load capacity per arm: 730 kg - Includes longitudinal and diagonal braces for 1,300 mm upright spacing - System length: 4,000 mm - Fastening materials included (floor anchors not included) - Supplied with assembly instructions and C4 load plates according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance delivery notice. The material is sensibly packed for easy unloading. Delivery is possible approximately 1–2 weeks after order receipt. Please note: For outdoor installation, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, and suitable for anchoring, and must be able to take the imposed loads. Customers are responsible for verifying soil condition, load-bearing capacity, and obtaining any necessary official permits. Uprights must be anchored to the floor by the customer; wall mounting is neither necessary nor recommended. According to trade association guidelines, uprights should project at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking, used: Hot-dip galvanized bolt-together system Scope of delivery: - 4 double-sided racking uprights, height 3,500 mm, each with 1,200 mm base parts - 24 cantilever arms, depth 1,200 mm, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. mounting hardware (floor anchors not included) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available anytime) - (*Also available in larger quantities: 20 uprights in stock) Isdpfx Alomkixwo Nstf Detailed description: - Robust steel construction made from IPE profiles - All components with hot-dip galvanized finish - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright has 6 bolted cantilever arms and 2 base sections, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (floor anchors not included) - Supplied with assembly instructions and C4 rated load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection available Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notice before delivery. The material is packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, flat, and suitable for anchoring as well as capable of supporting the applied loads. It is the customer's responsibility to check and ensure the suitability and load-bearing capacity of the substrate and obtain any necessary permits. Racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to German safety guidelines, it is recommended that the uprights have a minimum overhang of 500 mm above the highest storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack used: bolted system, hot-dip galvanized design Itedpfx Alomhh Dtj Nef Scope of delivery: - 4 rack uprights, height 4,160 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable, extensions possible anytime) - (*Offer also available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Goods are packed for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, level, suitable for anchors, and able to withstand the applied loads. The customer is responsible for checking and ensuring the floor condition, load-bearing capacity, and any required official approvals. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational health and safety regulations, it is recommended that racks have at least a 500 mm overhang above the top storage level relative to the top edge of the upright.

Stanje: zelo dobro (rabljeno), Four-jaw scroll chuck Diameter: 315 mm Chuck height (flange): 125 mm Short taper mount size: 6 Taper diameter: 106.39 mm Bolt circle diameter for stud bolts: 133.4 mm 4 stud bolts M12 Accessories: 1 chuck key Itjdpfelguy Sjx Al Nof 1 set of hard top jaws 1 set of hard step jaws Weight: 103 kg Transport dimensions: W800 x D600 x H550 mm

Stanje: dober (rabljeno), Sturdy workshop shelving unit Height: 2550 mm Width: 2740 mm Ijdpfx Aljf Tx U Sj Notf Depth: 800 mm with wooden shelves