Faymonville Max Trailer 3+5 Tiefbett (Baggerbett) nakup rabljenega (104.675)

Stanje: novo, največja dovoljena obremenitev: 92.045 kg, skupna masa: 126.000 kg, konfiguracija osi: > 3 osi, Oprema: ABS, Izvleček iz opreme Celotna oprema na zahtevo * 1 x gosi vrat MAX710-Hals-V-30-2.70 * Gosi vrat, hidravlično dvigljiv/spuščljiv in izpodrivljiv * Dolžina približno 3.650 mm. Za SZM 6x4 ali 8x4 * Jeklena čelna plošča, približno 400 mm visoka * Na gosi vrat se lahko namestijo aluminijaste bočne stene in zadnja stena, približno 400 mm visoke, v eloksirani izvedbi * 3,5-palčna kraljeva vlečna glava * Hidravlična priključnica za tovornjak z regulatorjem pretoka (20 l/min) * vključno z drogmi za obešanje napajalne linije * rezervoar SZM mora vsebovati vsaj 80 l, z MAX Trailer spojnicami; v nasprotnem primeru stranka zagotovi spojnice * BEKA-MAX centralno mazanje za gosi vrat z normalno maščobo NLGI-2 * TPMS sistem za nadzor tlaka v pnevmatikah, ustrezno * Dve orodjni omari INOX, približno 855 x 340 x 390 mm, na gosi vrat, levo in desno (± 48 kg) * 1-valjni dizelski motor Hatz (Silent Pack) z električnim zagonom in akumulatorjem * Hidravlične povezovalne cevi med hidravlično agregatom in priključno ploščo na gosi vrat * Daljinski upravljalnik: upravljanje hidravlične agregata, vklop/izklop dizelskega motorja * Upravljanje pomožnega krmiljenja, poleg kabelskega daljinskega upravljalnika * z 2 LED kontrolnima lučema na sprejemniku kot sistem za nadzor ene vozne osi * Upravljanje dvigovanja/spuščanja gosi vrata * Upravljanje dvigovanja/spuščanja vzmetenja podvozišč * Multikuplunške hidravlične priključnice na gosi vrat * 1 LED delovna luč levo in desno na zadnji plošči gosi vrat z ločenim stikalom za vklop/izklop * Štiri izpodrivna opozorilna tabla, izpodrivna za približno ± 2 000 mm, približno 423 x 423 mm, z eno LED pozicijsko lučjo in nosilcem za rotacijsko luč (± 122 kg) * 1 x 3-osni kompaktni sprednji podvozišče Podozzhfnspfx Al Derb * MAX710 podvozišče-PA-F-3-19.5-1.36-2.85 * Sprejemnik kavlja spredaj in zadaj * Dolžina: približno 3.560 mm * Širina podvozišča: približno 2.850 mm * Sprednji podvozišče z ločeno zračno priključnico za zračni vijak * BEKA-MAX centralno mazanje za 3-osni podvozišče z normalno maščobo NLGI-2 * Eno 7-polno vtičnico na levi in desni strani zadaj na sprednjem podvozišču za opozorilne table * TPMS sistem za nadzor tlaka v pnevmatikah v skladu z ECE R 1411 * LED delovne luči na levi in desni strani zadaj na sprednjem podvozišču z ločenim stikalom za vklop/izklop * Površina sprednjega podvozišča s premazom peska, nanesenim na metal, za preprečevanje zdrsa * Multikuplunške hidravlične priključnice na sprednjem podvozišču * 1 x most za bager: MAX710-nizko ležišče-BB-A-7.15-(430)-2.85 * Teleskopski most za bager BB-A z nadvoznim mostovnim kavljem spredaj in spojnico s spojkami zadaj * Osnovna širina: približno 2.850 mm, dolžina: približno 7.150 mm * Višina nosilca: približno 430 mm, širina nosilca: približno 1.350 mm * Višina nakladanja približno 580 mm pri oddaljenosti od tal približno 150 mm * 6 parov jeklenih preprog z gumijasto oblogo, približno 1.000 mm, 1 par približno 500 mm (± 1.660 kg) * Možnost privijanja (ø približno 40 mm) na vsakih približno 500 mm zunaj zgornjega pasu zunanje cevi mostu za bager za vijačne obroče (LC 16.000 daN) * Možnost privijanja M30 na vsakih približno 1.000 - 1.200 mm zunaj na notranji cevi mostu za bager za montažo vijačnih obročev (LC 10.000 daN) * Zložljive širitve z jeklenimi preprogami, nastavljive v širino od približno 2.850 mm do približno 3.250 mm * TPMS sistem za nadzor tlaka v pnevmatikah * Par ločenih klinih HeProLen iz plastike z protidrsnimi letevmi, približno 1.200 x 450 x 50/400 mm (± 130 kg) *

Stanje: novo, največja dovoljena obremenitev: 90.700 kg, skupna masa: 126.000 kg, konfiguracija osi: > 3 osi, skupna širina: 2.850 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: Hydraulically lift/lower and detachable gooseneck. Length approx. 3,650 mm. Suitable for tractor units: 6x4 or 8x4 3-axle compact front bogie: * Hook mounts at front and rear. Length: approx. 3,560 mm * Chassis width: approx. 2,850 mm Lowbed: * ATX-A lowbed with telescopic longitudinal beams in low-profile design, fixed hardwood floor approx. 50 mm thick * With drive-over bridge hooks at the front and bolt-lug coupling at the rear * Base width: approx. 2,850 mm, length: approx. 7,150 mm, beam height: approx. 330 mm, beam width: approx. 750 mm * Loading height approx. 480 mm, ground clearance approx. 150 mm 5-axle rear bogie: * Mechanical bolt-lug coupling for attaching a lowbed at the front; rear end traverse * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm * Pendulum axle 3-axle front bogie: * PENDULUM AXLES, all axles hydro-mechanically forced-steered * Hose rupture valve on axle leveling cylinder with automatic RESET function * Hydraulic cylinders with shutoff taps and locking pins for securing in raised position * Final painting of axles with 2 coats of single color 2K paint, painted in MB7350 Novagrau * Rated axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Tires for front bogie: 12 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J 5-axle rear bogie: * PENDULUM AXLES, all axles hydro-mechanically forced-steered * Hose rupture valve on axle leveling cylinder with automatic RESET function * Hydraulic cylinders with shutoff taps and locking pins for securing in raised position * Final painting of axles with 2 coats of single color 2K paint, painted in MB7350 Novagrau * Rated axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Tires for rear bogie: 20 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimum corrosion protection * Final painting with 2 coats of 2K topcoat, single color in RAL 3002 Carmine Red, according to RAL-System 841GL Predpfxew Tgp Ds Al Djb Including accessories: * Steel front wall, approx. 400 mm high * Plug-in aluminum side and rear boards on gooseneck, approx. 400 mm high, anodized * 3.5" kingpin * BEKA-MAX central lubrication for one gooseneck * Multi-coupling hydraulic connections on gooseneck * Front bogie with separate air connection for air impact wrench * BEKA-MAX central lubrication for one 3-axle bogie * Preparation for bolt-on container positioning for 1 x 20' or 1 x 30' on the outer beams * Without container locks * Brackets on the outer beams for installing foldable extensions * One 7-pin socket left and right, front and rear on rear bogie for warning panels * BEKA-MAX central lubrication for one 5-axle bogie * On the rear bogie, socket for cable remote control for steering * Rear bogie with trough * 2 LED reversing lights mounted on rear panel * European reflector boards (red-yellow) on the rear * One mudflap at rear * One LED beacon with bracket left and right on rear cross-member * Two INOX toolboxes 855 x 340 x 390 mm on gooseneck, left and right * 1-circuit...

Stanje: novo, največja dovoljena obremenitev: 73.540 kg, skupna masa: 102.000 kg, konfiguracija osi: > 3 osi, Oprema: ABS, Our complete vehicle inventory, including immediately and short-term available vehicles, can be found on our website. Excerpt from the equipment specification. Full equipment details available upon request. Gooseneck: * Hydraulically liftable/lowerable and detachable gooseneck, length approx. 3,650 mm * 2 pairs of fold-out lashing rings on the exterior (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings in the center of the gooseneck (LC 10,600 daN) * Suitable for tractor units 6 x 4 or 8 x 4, 2-axle Compact front bogie: * Hook coupling front and rear, length approx. 2,200 mm * Bogie width: approx. 2,850 mm Excavator deck: * Telescopic excavator deck with drive-over deck hooks at the front and pin-eye coupling at the rear * Base width: approx. 2,850 mm * Length: approx. 6,650 mm * Beam height: approx. 400 mm * Beam width: approx. 1,350 mm * Loading height approx. 550 mm with ground clearance approx. 150 mm 4-axle rear bogie: * Mechanical pin-eye coupling at the front for connecting a low-bed trailer * Rear end cross member, bogie width: approx. 2,850 mm * Bogie length: approx. 5,480 mm Podpfxexbmplo Al Dorb Oscillating axles, all axles hydro-mechanically forced-steered * Technical axle load: 14,640 kg per axle (62 km/h) * Hydraulic axle compensation Tyres: * Front bogie: 8 x (manufacturer’s choice; M+S) 285/70 R19.5 * Rear bogie: 16 x (manufacturer’s choice; M+S) 285/70 R19.5 * Load index 150/148J Paintwork: * Complete steel structure automatically shot-blasted after welding using a turbine blasting unit. Second abrasive blasting with corundum for optimum coating adhesion * Full chassis HRM-metalized with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final coating in 2 layers of 2-component top coat, single color in RAL 3002 carmine red, according to RAL 841GL system Including the following accessories: * Steel front wall, approx. 400 mm high * Plug-in ALU side panels and rear wall on the gooseneck, approx. 400 mm high, anodized finish * 3.5-inch kingpin * Truck hydraulic connection with flow controller (20 l/min) * Overhead support for supply lines; tractor unit tank must hold at least 80 l * With MAX Trailer coupling pieces; otherwise, couplings to be supplied by the customer ex works * BEKA-MAX centralized lubrication for gooseneck with standard grease NLGI-2 * Tool kit Art No. 612452 * Multi-coupling hydraulic connections on the gooseneck * Front bogie with separate air connection for air-powered tools * BEKA-MAX centralized lubrication for 2-axle bogie with standard grease NLGI-2 * One 7-pin socket each left and right at the rear of the front bogie for warning panels * Threading option (ø approx. 40 mm) every approx. 500 mm on the outside of the top flange of the excavator deck outer tube for screw rings (LC 16,000 daN) * Foldable extensions with steel mats, width adjustable from approx. 2,850 mm to approx. 3,250 mm * BEKA-MAX centralized lubrication for 4-axle bogie with standard grease NLGI-2 * Socket on the rear bogie for cable remote control of rear steering * Rear bogie with trough * Two stainless steel toolboxes, approx. 855 x 340 x 390 mm, mounted on the gooseneck left and right * Single-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery * Radio remote control: * Operation of the power pack, start/stop of the diesel engine * Operation of the rear steering, in addition to cable remote control * One LED work spotlight each left and

Stanje: rabljeno, največja dovoljena obremenitev: 25.630 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, prva registracija: 11/2024, naslednji pregled (TÜV): 11/2026, Oprema: ABS,

Stanje: rabljeno, največja dovoljena obremenitev: 30.660 kg, skupna masa: 43.000 kg, konfiguracija osi: 2 osi, prva registracija: 03/2024, naslednji pregled (TÜV): 03/2025, Oprema: ABS, Na naši spletni strani najdete celoten naš nabor vozil, ki so na voljo takoj ali v kratkem roku. Izvleček iz opreme: Celotna oprema na zahtevo. Nosilna ploščad * Nizkopodna prikolica s centralnim nosilcem v izvlečni izvedbi * Dolžina približno 6.750 mm * 5 parov zank, ki se odpirajo navzven (LC 5.000 daN) * 1 par zank, ki se odpirajo navzven (LC 10.000 daN) * 1 par zank, nameščenih ležeče zadaj na nosilni ploščadi (LC 10.000 daN) * Dovodne cevi so zaščitene in nameščene v centralnem nosilcu, ter se prilagajajo posamezni dolžini nizkopodne prikolice. "Gansji vrat" * Dolžina približno 3.900 mm * "Gansji vrat" je hidravlično dvigljiv in spuščljiv, prav tako pa se lahko tudi podaljšuje. * Tehnična obremenitev sedla: 23.000 kg Zadnja os * v kratki izvedbi z zaprtim zunanjim okvirjem in pokrovom iz diamantne plošče * Os s koritom za bager, ki je v zadnji polovici zaprt, da sprejme zračne rezervoarje * 2 para zank, ki se odpirajo navzven (LC 5.000 daN) * 1 par zank, ki se odpirajo navzven (LC 10.000 daN) Pedpszvt Tyefx Al Dorb Osi * Osi BPW * Hidro-mehansko prisilno krmiljenje * Tehnična obremenitev osi: 12.000 kg na os * Zračna vzmet z ventilom za dvig in spuščanje * Orodje za osi Pnevmatike * 245/70 R 17.5 3PMSF – proizvajalec po naši izbiri, indeks obremenitve (146/146F) Zavorna sistema * skladno s predpisi EU z EBS-E (2S2M) brez povezovalnih cevi do vlečne enote Jeklena konstrukcija * iz visoko trdnih finozrnatih jekel * Kakovosti jekla: S355J2+N/S355MC (meja tečenja 355 MPa) S690QL/S700MC (meja tečenja 690 MPa) Lakiranje * Visoko kakovostni dvokomponentni (2K) premaz * Končni premaz, enobarvni v RAL 3002 karminsko rdeči barvi Vključno z naslednjo dodatno opremo * 2 palčni Königov zatič * Pocinkana jeklena čelna plošča, približno 400 mm visoka * Nosilec za rezervno kolo pred čelno ploščo * Na pocinkani priključni letev spredaj, rumeno-rdeče zračne spojke * 4 klinasti zavori z nosilcem (± 5 kg) * Pomnoženo krmiljenje spredaj in zadaj s pomočjo kabelskega daljinskega upravljanja, upravljanje s pritiskom gumbov, z nadzorom sledenja osi (brez vgradnje v vlečno enoto) * Elektrohidravlična agregat (± 45 kg) * Rumena odsevna trak, skladno s predpisi EU, na strani, na izvlečni plošči in zadaj na prikolici * 1 lesen blok, približno 500x250x200 mm * Nosilec za aluminijaste nagibne rampe na zadnji strani vozila * Nosilec za rotacijsko luč na zadnji strani prikolice * Blatnik na zadnji strani prikolice * Evropske odsevne table (rdeče-rumene) na zadnji strani prikolice * Na "gansjem vratu" in zadnji plošči na levi in desni strani po en nosilec za opozorilne table, vključno z vtičnico * Priročnik in opis na USB ključu * Nalepka s hitrostjo 80 km/h na zadnji strani in na obeh straneh * Manometer za obremenitev osi za ugotavljanje obremenitve osi, vključno z diagramom obremenitve * Vključno z dodatno opremo – na "gansjem vratu" aluminijaste stranske plošče in zadnja plošča, vstavljive, približno 2.440 x 400 mm (D x V) * Zadnje pocinkane stranske plošče so odstranljive (dolžina nadstavbe približno 2.560 mm) (± 46 kg) * Na "gansjem vratu" ločen zračni priključek z zračno pištolo * 2 delovne luči s stikalom na prikolici, nameščeni na podestu "gansjega vrata" na levi in desni strani * 6 parov stranskih žepov za stranske plošče, približno 100 x 50 mm v zunanjem okvirju nosilne ploščadi * 2 para v zunanjem okvirju osi (± 29 kg) * Podaljški, pocinkani, izvlečni za približno 230 mm na stran (± 262 kg) * Hidravlični priključki od "gansjega vrata" do nizkopodnega priključka z ve

Stanje: novo, največja dovoljena obremenitev: 30.190 kg, skupna masa: 43.000 kg, konfiguracija osi: 2 osi, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available for immediate or short-term delivery, on our website. The following is an excerpt from the specifications. Complete equipment details available upon request. Load area: - Lowbed with external beams, extendable version in SUPER LOW design, length approx. 6,850 mm - Lowbed with fixed hardwood floor, approx. 40 mm thick, with mechanical locking - Supply lines are protected within the extendable beams and automatically adjust to the current lowbed length - 5 pairs of lashing rings, foldable outward (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for mounting bolted RUD rings Gooseneck: - Gooseneck in SNT design to optimize load area length, approx. 3,750 mm - Gooseneck hydraulically lift/lowerable and detachable - Technical fifth wheel load: 23,000 kg - For tractor units: 4x2, 6x2 Rear chassis: - Rear chassis in short version with closed outer frame and checker plate cover - Chassis with excavator recess, closed in the rear half to accommodate air tanks - 2 pairs of lashing rings, foldable outward (LC 5,000 daN) - 1 pair of lashing rings, foldable outward (LC 10,000 daN) - 1 pair of lashing rings lying flat, at the front & rear of the chassis (LC 10,000 daN) Axles: - BPW axles, hydro-mechanically forced-steered - Technical axle load: 12,000 kg per axle - Air suspension with raise/lower valve Pedpfx Aexarl Nol Dsrb Tyres: - Tyres 245/70 R 17.5 3PMSF, manufacturer of our choice - Load index (146/146F) - TPMS tyre pressure monitoring system according to ECE R 141 - Data transmission to tractor via standardized EBS interface (ISO 11992) - For proper display, the tractor must be capable of transmitting and displaying these data Braking system: - Braking system according to EU regulations with EBS-E (2S2M) Electrical system: - Electrical system in accordance with EU regulations, 24-volt lighting ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with turn indicator - ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: - Steel construction of high-strength fine-grain steels - Steel qualities: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Entire steel construction automatically shot-blasted after welding - Second blasting with corundum for optimal coating adhesion - Complete vehicle chassis coated with HRM metallization using ZINACOR 850 (85% zinc / 15% aluminium) for premium corrosion protection - Top coat with 2 layers of 2K paint in RAL 3002 carmine red, single-color, according to RAL system 841GL - Rims in silver - Rear section metallized and painted in RAL 9010 (pure white) - No metallic paint possible - Paint system tested in salt spray test according to ISO 9227-NSS - Cavity sealing with special wax Including the following additional equipment: - 2-inch kingpin - One galvanized steel front wall, approx. 400 mm high - Remote-steered axles from front and rear via cable control with pushbuttons, with single-track monitoring (without installation in tractor unit) - Hydraulic connections from gooseneck to lowbed with multi-coupler instead of threaded couplings - Electro-hydraulic power unit - Prepared for installation of bolted container mounts for 1x 20' or 1x 40' container on outer beams - Without container locks

Stanje: novo, največja dovoljena obremenitev: 25.645 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full equipment details available upon request. Loading Platform: - Low-bed with central beam in extendable design, length approx. 6,750 mm - 5 pairs of lashing rings, foldable outwards (LC 5,000 daN) - 1 pair of lashing rings, foldable outwards (LC 10,000 daN) - 1 pair of flush-mount lashing rings at the rear of the loading platform (LC 10,000 daN) Gooseneck: - Gooseneck hydraulically lift/lowerable and detachable Rear Running Gear: - Rear running gear in short version with closed outer frame and tread plate cover - Running gear with excavator trough, trough rear half enclosed for housing air tanks - 2 pairs of lashing rings, foldable outwards (LC 5,000 daN) - 1 pair of lashing rings, foldable outwards (LC 10,000 daN) - 1 pair of flush-mount lashing rings at the rear of the running gear (LC 10,000 daN) Axles: - BPW axles, hydromechanically forced steering - Air suspension with lifting and lowering valve Tyres: - Tyres 245/70 R 17.5 3PMSF - TPMS: tyre pressure monitoring system as per ECE R 141 Brake System: - Wabco braking system in compliance with EU regulations with EBS-E (2S2M) Paintwork: - High-quality 2-component (2K) top coat, single colour RAL 3000 flame red Includes the following additional equipment: - 2 king pins - One galvanised steel front wall, approx. 400 mm high Prodpoxf Silofx Al Djb - Remote steering adjustment from front and rear via cable remote control with pushbuttons, including single-track axle alignment (without installation in the tractor unit) - Electro-hydraulic unit - Axle load gauge including axle load diagram - On the gooseneck, aluminium side boards and rear wall, plug-in type, approx. 2,440 x 400 mm (L x H). The rear galvanised plug-in stanchions are removable. (Upper body length approx. 2,560 mm) - Separate air connection with blow gun on the gooseneck - 2 work lights with switch on the trailer, mounted on left and right sides of the gooseneck platform - One INOX toolbox, approx. 1,350 x 400 x 400 mm, mounted on the gooseneck - 6 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading platform, 2 pairs in the rear frame of the running gear - Galvanised, extendable load width extensions approx. 230 mm per side - Hydraulic connections from the gooseneck to the low-bed with multi-coupling instead of screw couplings. No guarantee on seals. - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard grease NLGI-2 with removable pump protection - 2 pairs of WADER container pockets in the loading platform, for 1x 20’ container - One removable galvanised intermediate platform with 1 pair of WADER container pockets - 1 pair of steel ramps to bridge over the low-bed’s loading hooks - Loading platform with painted sand layer as anti-slip protection - HRM metallization (High Resistance Metallization)

Stanje: dober (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 4480, skupna dolžina: 14.500 mm, skupna širina: 7.800 mm, skupna višina: 3.500 mm, skupna masa: 20.000 kg, Reichenbacher Machining Center VISION III-TT-L – 5-axis, 3-axis, MBG8, 5x SNA Equipment: 5-axis unit with gimbal-mounted spindle: Predpfx Aljywzq Ss Dsb Max. speed: 24,000 rpm Nominal speed: 10,000 rpm Power in S1*: 15 kW Max. power in S6: 20 kW Torque in S1*: 14.5 Nm Torque in S6: 19 Nm Nominal voltage: 380 V Nominal current: 37 A Nominal frequency: 380 Hz Speed programmable from 0 – 24,000 rpm, adjustable in 1 rpm increments Clockwise/counterclockwise rotation programmable Drive by frequency converter Maintenance-free Water-cooled Hybrid bearing Automatic spindle stop in emergency stop situation Orientated stop for tapping Tool holder: HSK-F63 hollow shaft taper as per DIN 69893-6 Max. usable tool length from spindle nose: 240 mm Max. usable tool weight: 6 kg 3-axis unit with vertically mounted spindle: Max. speed: 24,000 rpm Nominal speed: 10,000 rpm Power in S1*: 15 kW Max. power in S6: 20 kW Torque in S1*: 14.5 Nm Torque in S6: 19 Nm Nominal voltage: 380 V Nominal current: 37 A Nominal frequency: 380 Hz Speed programmable from 0 – 24,000 rpm, adjustable in 1 rpm increments Clockwise/counterclockwise rotation programmable Drive by frequency converter Maintenance-free Water-cooled Hybrid bearing Automatic spindle stop in emergency stop situation Orientated stop for tapping Tool holder: HSK-F63 hollow shaft taper as per DIN 69893-6 Max. usable tool length from spindle nose: 240 mm Max. usable tool weight: 6 kg 8-spindle drilling unit (1 pc): L-shape, Grotefeld Drilling spindles: individually selectable Rotation direction: clockwise/counterclockwise Hole pitch: 32 mm Power: 2.5 kW Speed: fixed at 5,000 rpm Z +75 Mount: D = 10 mm H7 Feed stroke: 80 mm Grooving unit (5 pcs): GROTEFELD angle saw unit F100-S Working/milling stroke pneumatically actuated. Drive: three-phase motor with Poly-V belt LEFT-hand design Drive rotation direction: clockwise/counterclockwise Speed ratio: 1:2.86 – belt drive Power: 2.20 kW – 220-240/380-415 V – 50 Hz Speed: n1 = 2,800 rpm n2 = 8,011 rpm at 50Hz Spindle power: 2.2 kW Feed rate: 150 mm Tool holder: ø30 x 1.5 mm – 5.0 mm Tool holder rotation: counter to drive rotation Feed force: 2,565 N Underfloor drilling unit in machine bed (1 pc): GROTEFELD angle milling head G06-1.1-P Working/drilling stroke pneumatic. Drive motor: 1.1 kW 220-240/380-415 V 50-100 Hz Drive rotation: right Speed ratio: 1:1.55 gear drive Drive speed: 2,800 – 5,600 rpm Tool spindle speed: 4,340 – 8,680 rpm Tool holder: 1x HI-Q/ERM25 DIN6499-C (8°) for collet chuck ER25 DIN 6499-B, ø0.5–16 mm max. Tool holder rotation: right Flange clamp: FK45 Feed slide: with pneumatic cylinder, dual steel shafts Feed: 80 mm

Stanje: novo, največja dovoljena obremenitev: 38.140 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our full range of immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment list available on request. Gooseneck: - Gooseneck with approx. 45° chamfered front corners and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Approx. 30 mm thick hardwood flooring Loading platform: - Telescopic loading platform with rear slope approx. 1,000 mm x 8° - Between the 1st and 2nd axle, a pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece, removable, galvanized cover over the wheel recesses (W approx. 670 mm – max. point load 5 t / each) - 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) - 4 pairs of folding external lashing rings (LC 5,000 daN) - 3 pairs of folding external lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: - 235/75 R17.5 3PMSF tyres, manufacturer of our choice - TPMS – Tire Pressure Monitoring System according to ECE R 141 - Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992 - The tractor unit must be capable of transmitting and displaying these data for correct indication. Axles: - BPW axles and suspension, 2 axles fixed, 3rd axle trailing steer - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve. Axle tools Braking system: - WABCO braking system in accordance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor Electrical system: - Electrical system in accordance with EU regulations - LED lighting 24 volts ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicators - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel construction: - Steel construction made from high-strength fine-grained steel - Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Painting: - Entire steel structure automatically shot-blasted with shot-blast machine after welding - Second blasting with corundum for optimal coating adhesion - HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% Zinc / 15% Aluminum) to ensure best corrosion protection - Final coating with 2 layers of 2K top coat, single color RAL 3002 Carmine Red. Rear section metallized and painted in RAL 9010 (Pure White) - Metallic paint not possible - Paint system tested in salt spray test according to ISO 9227-NSS - Cavities sealed with special wax Including the following accessories: - On both the gooseneck and at the rear left and right, one holder for warning boards, including socket Predpow Tpq Dofx Al Djb - Spare wheel holder in front of the bulkhead (without spare wheel) - 2" king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings at the galvanized connection panel at the front - Galvanized folding supports under the rear slope of the loading platform - Hardwood rear impact protection from gooseneck rear wall to loading platform - 1 pair of recessed lashing rings along the central frame at the rear in the slope (LC 10,000 daN) - On the gooseneck, aluminum side and rear walls

Stanje: novo, skupna masa: 58.000 kg, Leto izdelave: 2026, MAX100 4 A 8.60 U Low Loader Semi-Trailer Technical Specifications Speed: 80 km/h Gross weight: 60,800 kg Fifth-wheel load: 18,000 kg Axle load: 42,800 kg Prsdpfx Aleg Sk T De Djb Unladen weight: Payload: Gooseneck length: 3,850 mm Loaded fifth-wheel height: 1,250 mm Loading area length: 8,600 mm Extendable by: 5,400 mm Axle spacing: 1,360 mm Rear steering radius: 2,300 mm Loading height at max. load: 860 mm Overall width: 2,540 mm Suspension travel: -55/+145 mm Technical Description Gooseneck With front corners chamfered at 45° and rear bevel approx. 760 mm x 10° 3 pairs of lashing rings (LC 5,000 daN) Hardwood flooring, 30 mm thick Loading area, extendable version with rear bevel approx. 1,000 mm x 8° 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) 1 pair of horizontal lashing rings at front of loading area (LC 10,000 daN) Hardwood flooring approx. 48 mm thick, checker plate over axles Ramps Two-piece steel ramps One pair of galvanized two-piece steel ramps approx. 2,750 + 1,400 mm x 800 mm with approx. 48 mm thick hardwood covering Ramp with hydraulically folding ramp sections, hydraulic lifting system and hydraulically adjustable. Maximum load capacity per pair: 40,000 kg Tyres 235/75 R 17.5 Braking system in accordance with EU standards with EBS-E (4S3M) without connecting lines to the tractor unit Paintwork First-class, durable corrosion protection of the standard shot-blasted welded frame guaranteed by 2-component zinc-dust primer High-quality 2-component (2K) topcoat, single-color finish in RAL shades of your choice Rear section metallized and painted in RAL 9010 (pure white) Landing Gears: JOST mechanical landing gears with 2-speed gearbox for 24 t Lifting capacity (test load 50 t) Steel structure made of high-strength fine-grain steels. Steel Grades: Steel structure made of high-strength fine-grain steel S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrics in accordance with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets. Connection in accordance with ISO. 24N ISO-1185 24S ISO-3731 15 pin ISO-12098 Accessories included: One galvanized steel front wall approx. 400 mm high 2" king pin 4 wheel chocks with holder on the front wall Bracket for a rotating beacon at rear of the trailer SAF axles, two fixed axles, one trailing-steering axle, air-suspended, with drum brake, with lifting/lowering function. Trailing steering axle with electro-magnetic reverse lock, can be activated via reverse gear or manually. Axle tools Mounting at the rear of the gooseneck for ALU loading ramps Galvanized folding supports under the bevel of the loading area Mechanical safety lock for the loading area One spare wheel with holder in front of the front wall Yellow reflective tape along the sides, extension and rear of trailer, in accordance with EU regulations. At the galvanized front connection strip, yellow-red air couplings On gooseneck and rear plate left and right, each with mount for warning plates and socket included Mudflap at trailer rear Manual and documentation On gooseneck, plug-in ALU sideboards and rear wall approx. 2,440 x 400 mm (L x H) The rear galvanized stake pockets are removable Body length approx. 2,560 mm, +/- 46 kg 3 pairs WADER container locks in the loading area for a 20', 30' or 40' container (± 30 kg) 6 pairs of stake pockets for plug-in stakes

Stanje: novo, največja dovoljena obremenitev: 36.040 kg, skupna masa: 53.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete inventory of immediately and short-term available vehicles can be found on our website. Excerpt from the equipment list. Full specification available on request. Gooseneck: * Gooseneck in SNT design to optimize loading deck length, approx. 3,750 mm long * Gooseneck hydraulically liftable/lowerable and detachable * For tractor units: 6 x 4 or 8 x 4 Lowbed: * Lowbed with exterior beams, extendable, SUPER LOW design, approx. 8,000 mm long * Lowbed with fixed hardwood flooring approx. 40 mm thick and mechanical locking * Supply lines routed protected within the extendable beams, automatically adapting to the lowbed length * 7 pairs of folding lashing rings outward (LC 10,000 daN) * 6 pairs of threaded mounting blocks on the inner beam for screwable RUD rings Rear chassis: * Rear chassis with closed outer frame and tread plate cover * Chassis with excavator recess, closed in the rear half to house air tanks * 3 pairs of folding lashing rings outward (LC 5,000 daN) * 1 pair of folding lashing rings outward (LC 10,000 daN) * 1 pair of horizontal lashing rings, positioned front & rear on the chassis (LC 10,000 daN) Axles: * BPW axles and suspension, all axles with hydro-mechanical forced steering * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve Tyres: * Tyres 245/70 R 17.5 3PMSF – manufacturer at choice. Load index (146/146F) Braking system: * WABCO braking system according to EU regulations with EBS-E (2S2M) Coating: * HRM metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure optimal corrosion protection * Finished with 2 coats of 2K paint, single-colored in RAL 3002 Carmine Red, per RAL System 841GL Includes accessories: Prodsy Uwu Iepfx Al Deb * 2-inch kingpin * One galvanized steel front bulkhead, approx. 400 mm high * At the galvanized front connection strip, yellow-red air couplings * Remote axle steering, from front and rear, operated by cable remote control with push buttons, including axle alignment monitoring (without installation on the tractor unit) * Preparation for bolt-on container lockings to accommodate 1 x 20', 1 x 40', or 1 x 45' container on the outer rails. Without container locks * Hydraulic connections from gooseneck to lowbed with a multicoupling instead of screw couplings * Electrohydraulic unit * Spiral cable (approx. 35 mm², approx. 3.5 m in length, max. 250A) for the power supply to the electrohydraulic unit and/or the electric winch, with plug connection (NATO-NATO) between trailer and tractor unit * Yellow reflective tape according to EU regulations, on the sides, extension, and at the rear of the trailer * At the gooseneck front and rear left and right, each with a holder for warning signs, including socket * Manual and documentation on USB stick * Central lubrication system with 2 pumps BEKAMAX (Pico) with standard grease NLGI-2 and removable protection for the pumps * 7 pairs of threaded blocks between the lashing rings under the top flange on the outer rail for mounting screwable RUD rings VLBG-4 * 2nd ride height, approx. 50 mm above standard ride position, selectable via manual control * On the gooseneck, plug-in ALU side and rear walls approx. 2,440 x 400 mm (L x H). The rear, galvanized plug-in stanchions are removable (superstructure length approx. 2,560 mm) * Separate air connection with air gun on the gooseneck * A stainless steel toolbox, INOX, approx. 1,350 x 400 x 400 mm

Stanje: rabljeno, največja dovoljena obremenitev: 36.515 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2023, naslednji pregled (TÜV): 05/2027, Oprema: ABS, Izvod opreme: V-priklop: V-priklop s poševnimi robovi, spredaj pribl. 45° in zadaj pribl. 750 mm x 10°. 3 pari pritrdilnih obročev (LC 5.000 daN). Tla iz trdega lesa, debeline pribl. 30 mm. Platforma z raztegljivo izvedbo: Platforma z raztegljivo izvedbo in zadaj poševnimi robovi pribl. 1.000 mm x 8°. 5 parov pritrdilnih obročev, zunanji, z možnostjo zlaganja (LC 5.000 daN). 3 pari pritrdilnih obročev, zunanji, z možnostjo zlaganja (LC 10.000 daN). 1 par pritrdilnih obročev, nameščen vodoravno na sprednjem delu platforme (LC 10.000 daN). Tla iz trdega lesa, debeline pribl. 48 mm, nad osmi rebrasto jeklo. Osi: Osi BPW in vzmetenje, vse osi so hidravlično-mehansko prisilno usmerjene. Tehnična obremenitev osi: 12.000 kg na os. Zračno vzmetenje z ventilom za dvig in spuščanje. Orodje za osi. Pnevmatike: Pnevmatike 245/70 R 17.5 3PMSF, indeks obremenitve (146/146 F) – znamka po naši izbiri. Podporne noge: JOST podporne noge (mehanske) z 2-stopenjskim menjalnikom za pribl. 24 t nosilnosti (pribl. 50 t testna obremenitev). Zavorna sistema: Zavorna sistema v skladu z direktivami EU s sistemom EBS-E (2S2M) brez povezovalnih vodov do vlečne enote. Lakiranje: Odlična in dolgotrajna protikorozijska zaščita standardno peskanega jeklenega okvirja, zagotovljena s 2-komponentno (2K) osnovo z večjo vsebino cinka. Kakovostno 2-komponentno (2K) končno lakiranje v eni barvi, RAL 3002, karminska rdeča. Zadnji del je metaliziran in lakiran v RAL 9010 (čista bela). Metalizirano lakiranje ni mogoče. Pjdezqiiaopfx Al Djrb Jeklena konstrukcija: Jeklena konstrukcija iz visoko trdnih finozrnatih jekel. Vrste jekla: S355J2+N/S355MC (meja tečenja 355 MPa), S690QL/S700MC (meja tečenja 690 MPa). Električna napeljava: Električna napeljava v skladu z direktivami EU, razsvetljava 24 voltov ASPÖCK-NORDIK (ASS3), ASPÖCK-UNIBOX na sprednji priključni plošči z vtičnicami 24N, 24S in 15-polna. Priključek v skladu s standardom ISO. 24N ISO-1185, 24S ISO-3731, 15-polni ISO-12098. Vključeno naslednje dodatne opreme: - 2-palčni kraljevi zatič - pocinkana jeklena sprednja plošča, pribl. 400 mm visoka - rumeno-rdeče zračne spojke na pocinkani sprednji priključni plošči - 4 klini z nosilci na sprednji plošči (± 5 kg) - nosilec za rezervno kolo pred sprednjo ploščo - elektro-hidravlična agregat (± 45 kg) - dodatno krmiljenje od spredaj in zadaj s kabelskega daljinskega upravljalnika preko gumbov, z nadzorom enoslednosti osi (brez vgradnje v vlečno enoto) - nosilec na zadnjem delu V-priklopa za aluminijaste rampe - evropske odsevne table (rdeče-rumene) na zadnjem delu prikolice - rumen odsevni trak v skladu z direktivami EU na straneh, na raztegljivi platformi in na zadnji strani prikolice - na V-priklopu in zadnji plošči, na levi in desni strani, po en nosilec za opozorilne table, vključno z vtičnico - nosilec za okroglo luč na zadnji strani prikolice - pocinkani zložljivi nosilci pod poševnino platforme - odbijač blata na zadnji strani prikolice - priročnik in opis na USB-pomnilniku - nalepka za omejitev hitrosti 80 km/h na zadnji strani in na obeh straneh - manometer za obremenitev osi, za ugotavljanje obremenitve osi, vključno z diagramom obremenitve.

Stanje: rabljeno, konfiguracija osi: > 3 osi, prva registracija: 01/2019, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 13.800 mm, skupna širina: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 245/70R17.5, medosna razdalja: 10.160 mm, barva: rdeča, Leto izdelave: 2019, Oprema: ABS, 1 x dvižna os 3 x krmilna os. Daljinsko upravljanje s pomočjo radia. Hidravlična rampa. Kamera. = Dodatne informacije = Konfiguracija osi Mere pnevmatik: 245/70R17.5 Zavore: bobnaste zavore Vzmetenje: zračno vzmetenje Zadnja os 1: dvojne pnevmatike; profil pnevmatik levo notranji: 50 %; profil pnevmatik levo zunanji: 50 %; profil pnevmatik desno notranji: 50 %; profil pnevmatik desno zunanji: 50 % Zadnja os 2: dvojne pnevmatike; krmilna; profil pnevmatik levo notranji: 30 %; profil pnevmatik levo zunanji: 30 %; profil pnevmatik desno notranji: 30 %; profil pnevmatik desno zunanji: 30 % Zadnja os 3: dvojne pnevmatike; krmilna; profil pnevmatik levo notranji: 40 %; profil pnevmatik levo zunanji: 40 %; profil pnevmatik desno notranji: 40 %; profil pnevmatik desno zunanji: 40 % Zadnja os 4: dvojne pnevmatike; krmilna; profil pnevmatik levo notranji: 60 %; profil pnevmatik levo zunanji: 60 %; profil pnevmatik desno notranji: 60 %; profil pnevmatik desno zunanji: 60 % Prsdpfxozp Drys Al Dsb Teže Lastna teža: 11.344 kg Nosilnost: 54.656 kg Največja dovoljena masa: 66.000 kg Vzdrževanje Tehnični pregled (APK): veljaven do 02.2027 Finančne informacije Cena: Na zahtevo Identifikacija Številka modela: max trailer N/A F-S44 / STEERING = Podatki o podjetju = VSE CENE SO NETO ZA IZVOZ. (Joris Versteijnen NL-DE-GB), (Wouter Greutink NL-DE-GB-ES-IT). Govorimo tudi rusko. Po najboljših močeh se trudimo, da navedemo pravilne informacije. Kljub temu iz navedenih besedil ni mogoče pridobiti pravic.

Stanje: rabljeno, Leto izdelave: 2014, Contact Theo Lelie for further information. Psdsxu Uxzspfx Al Dorb

Stanje: novo, največja dovoljena obremenitev: 48.930 kg, skupna masa: 63.000 kg, konfiguracija osi: > 3 osi, Oprema: ABS, Celotno zalogo vozil, vključno z vozili, ki so na voljo takoj in v kratkem roku, najdete na naši spletni strani. Izvleček iz opreme. Popolna oprema na zahtevo. "Gooseneck" prikolica * s poševnimi robovi spredaj, približno 45° in z zadnjim poševnim robom, približno 750 mm x 10° * 3 pari pritrdilnih obročev (nosilnost 5.000 daN) * trdna lesena obloga, debeline približno 30 mm Tovorilna površina * dvodelna, izpodvlačna izvedba z zadnjim poševnim robom, približno 500 mm x 8° * 5 parov pritrdilnih obročev, ki se zunanji prepognejo (nosilnost 5.000 daN) * 4 pari pritrdilnih obročev, ki se zunanji prepognejo (nosilnost 10.000 daN) * 1 par pritrdilnih obročev, nameščenih ležeče na sprednji strani tovorilne površine (nosilnost 10.000 daN) * 1 vmesna miza, približno 250 mm * izrezi v zunanjem okvirju tovorilne površine za pritrditev zategovalnih trakov (nosilnost 2.000 daN) * trdna lesena obloga, debeline približno 48 mm, nad osmi je valjasta kovinska obloga Osi * osi BPW, hidravlično-mehansko sinhronizirano krmiljenje * tehnična nosilnost osi: 12.000 kg na os * zračna vzmetenje z ventili za dvig in spuščanje Pnevmatike * 245/70 R 17.5 3PMSF, indeks obremenitve (146/146 F) * TPMS sistem za nadzor tlaka v pnevmatikah, v skladu s standardom ECE R 141 Opore sedla * JOST opore sedla (mehanske) z dvostopenjsko prestavo za približno 24 t nosilnosti (približno 50 t testna nosilnost) Zavorna naprava * v skladu z direktivami EU z EBS-E (4S3M) Jeklena konstrukcija * iz visoko trdnih finozrnatih jekel * vrste jekel: S355J2+N/S355MC (meja tečenja 355 MPa) * S690QL/S700MC (meja tečenja 690 MPa) Električni sistem * v skladu z direktivami EU, osvetlitev 24 voltov ASPÖCK-NORDIK (ASS3) * vse LED stranske markerne luči utripajo sinhronizirano s smerniki * ASPÖCK-UNIBOX na priključni letev spredaj s vtičnicami 24N, 24S & 15-polni priključek, v skladu s standardom ISO. 24N ISO-1185 24S ISO-3731 15-polni ISO-12098 Barvanje * celotna jeklena konstrukcija, po varjenju, avtomatsko peskana z metodo vrtinčenja * drugo peskanje s korundom za optimalno oprijemljivost prevlečnega sistema * HRM-metalizacija celotnega podvozja vozila z ZINACOR 850 (85% cink/15% aluminij) za zagotovitev najboljše zaščite proti koroziji * končna barva z 2 plastma 2K-lak, enobarvno, v RAL 3002 Karminrot, v skladu s sistemom RAL 841GL Podpfx Ajzlwm Ael Djrb * platišča v srebrni barvi. Zadnji del je metaliziran in pobarvan v RAL 9010 (čista bela) * metalizirano barvanje ni mogoče * test barvne strukture izveden v testu meglenega spreja s soljo, v skladu s standardom ISO 9227-NSS * zaščita notranjih prostorov s posebnim voskom Vključno z naslednjo dodatno opremo 2-palčni kraljevi vtič * elektro-hidravlična agregat (± 45 kg) * dodatno krmiljenje od spredaj in od zadaj s kablom, upravljanje s pritiskovnimi gumbi, z nadzorom posameznih osi (brez vgradnje v centralno krmilno enoto) * na "gooseneck" prikolici in na zadnji plošči, na levi in desni strani, držalo za opozorilne table, vključno z vtičnico * držalo za okroglo luč na zadnji strani prikolice * na "gooseneck" prikolici aluminijaste stranske stene in zadnja stena, ki se lahko vstavi, približno 2.440 x 400 mm (D x V) * zadnje pocinkane stranske stene se lahko odstranijo. (dolžina nadgradnje, približno 2.560 mm) (± 46 kg) * orodjarna omara, pocinkana, integrirana v poševno "gooseneck" prikolico (± 47 kg) * 4 pari WADER žepov za zabojnike na tovorilni površini za 20', 2x 20', 40' ali 45' zabojnik (± 40 kg) * 7 parov žepov za stranske stene, približno 100 x 50 mm

Stanje: novo, največja dovoljena obremenitev: 48.300 kg, skupna masa: 71.000 kg, konfiguracija osi: > 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, including vehicles available immediately and at short notice, can be found on our website. Below is an excerpt from the equipment list. Full specification available upon request. GOOSENECK: * Gooseneck with integrated single-axle running gear (pendulum axle) in a detachable version * Gooseneck hydraulically liftable and lowerable, including hydraulic connection linked to the hydraulic axle compensation of the first axles * Length: approx. 5,200 mm, with front tapering approx. 60° * Fifth wheel load according to data sheet: W25-DSR2700-12/22.7 * For tractor units: 6 x 4 or 8 x 4 * Steel front wall, plug-in type, approx. 400 mm high, with beveled design * 1 pair of mechanical supports at the front of the gooseneck * ASPÖCK-UNIBOX on the front connector panel with 24N, 24S & 15-pin sockets * 1 spare wheel holder inside the front wall of the gooseneck with jib * 2 pairs of recessed lashing rings on the gooseneck (LC 2,500 daN) * 2 pairs of recessed lashing rings on the outer frame of the running gear at the front, foldable outward (LC 10,000 daN) * 1 pair of lashing rings at the transition from running gear to loading platform (LC 10,600 daN) * On the gooseneck 1 pair of removable aluminum drop sides, approx. 400 mm high, anodized * On the gooseneck 1 removable aluminum rear wall, approx. 400 mm high, anodized * 3.5 inch kingpin * TPMS tire pressure monitoring system according to ECE R 141 * Round NATO socket on the front connector panel (Maeler & Kaege VG 96 917) * 1 stainless steel toolbox with 1 lid, mounted on the gooseneck on the right in the direction of travel by the aluminum drop side, approx. 1,350 x 400 x 400 mm (L x W x H) LOADING PLATFORM: * Low-bed with external beams, designed as a telescopic loading platform in low-profile design with front extension including fixed approx. 50 mm thick hardwood floor * Length x width approx. 8,000 mm x 2,740 mm * Mechanical bolt-lug coupling from low-bed to running gear for swapping the loading platform or installing extension beams * One locking position approx. every 500 mm on the extension * 4 pairs of recessed lashing rings fitted flat in the loading platform along the outer frame/external beams (LC 10,000 daN) * 1 lashing ring each on the left and right outer rear cross member (LC 10,000 daN) * Foldable extensions, approx. 230 mm per side (WITHOUT wooden boards) * Loose extension planks, steel-rimmed * Preparation for installation of bolted container positions for 1x 20’ or 1x 40’ container on the outer beams. Without container locks * 6 pairs of threaded blocks between the lashing rings under the top chord of the outer beam for mounting bolted M24 rings (LC 8,000 daN) * 2 pairs M24 bolt rings (LC 8,000 daN) included REAR RUNNING GEAR: * Rear running gear with closed outer frame, checker plate decking and continuous prism-shaped excavator trough, approx. 1,450 x 900 x 505 mm, open at the rear * PENDULUM AXLE, all axles hydro-mechanically forced-steered * Hose rupture valve on axle compensation cylinder with automatic reset function * Hydraulic cylinders with shut-off valves and foreplugs to secure in raised position * Final paint of axles in 2 layers of 2-component paint, single color, DB 7350 Novagrau * Technical axle load: 12,000 kg each * Hydraulic axle compensation * 245/70 R 17.5 3PMSF, brand at our choice * Remote steering from front and rear via cable control, with axle alignment check, no installation in the tractor unit Psdpfx Ajyhkqnjl Djrb * 4 pairs of hanging la

Stanje: rabljeno, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2017, * SAF osi * Kolesni izrezi Pjdpfx Aewta Aljl Dorb * Hidravlične nakladalne rampe, nastavljive po širini * Zračno vzmetenje * Možnost razširitve * Lastna teža: 11.020 kg ----Interna številka vozila: 11010----Napake in vmesna prodaja pridržane. WhatsApp podpora na voljo! Za vprašanja o vozilu ali dodatne informacije nam pišite udobno preko WhatsAppa WhatsApp nemško, angleško -- WhatsApp nemško, angleško, arabsko

Stanje: rabljeno, konfiguracija osi: > 3 osi, prva registracija: 10/2006, skupna širina: 2.850 mm, vzmetenje: drugo, velikost pnevmatike: 285/70R19.5, barva: črn, Leto izdelave: 2006, Oprema: ABS, = Dodatne možnosti in dodatna oprema = - Osrednje podmazovanje = Opombe = Faymonville Jeep prikolica D3 Letnik 2006. 1 x dvižna os. 1 x os s trenjem za krmiljenje / os s pomikom. Zračna vzmet. Maksimalna dovoljena tehnična masa: 56.000 kg. Faymonville STBZ-5VA Letnik 2006. Nihačna os. Odstranljiv sprednji del. Premikalna ploščad. Razširljiva platforma: 400 cm. Pjdpfx Aloxbng Es Derb Nosilna platforma: 650 + 400 cm. 50.000 kg nosilnosti sprednjega dela. Maksimalna dovoljena tehnična masa: 119.680 kg. = Dodatne informacije = Konfiguracija osi Dimenzije pnevmatik: 285/70R19.5 Zavore: bobnaste zavore Sprednja os 1: Dvojne pnevmatike; profil pnevmatike levo notranji: 15%; profil pnevmatike levo zunanji: 60%; profil pnevmatike desno notranji: 60%; profil pnevmatike desno zunanji: 60%; vzmetenje: zračno vzmetenje Sprednja os 2: Dvojne pnevmatike; profil pnevmatike levo notranji: 30%; profil pnevmatike levo zunanji: 30%; profil pnevmatike desno notranji: 40%; profil pnevmatike desno zunanji: 60%; vzmetenje: zračno vzmetenje Sprednja os 3: Dvojne pnevmatike; krmilna os; profil pnevmatike levo notranji: 30%; profil pnevmatike levo zunanji: 70%; profil pnevmatike desno notranji: 60%; profil pnevmatike desno zunanji: 70%; vzmetenje: zračno vzmetenje Zadnja os 1: Dvojne pnevmatike; krmilna os; profil pnevmatike levo notranji: 30%; profil pnevmatike levo zunanji: 60%; profil pnevmatike desno notranji: 40%; profil pnevmatike desno zunanji: 70%; vzmetenje: hidravlično vzmetenje Zadnja os 2: Dvojne pnevmatike; krmilna os; profil pnevmatike levo notranji: 50%; profil pnevmatike levo zunanji: 50%; profil pnevmatike desno notranji: 30%; profil pnevmatike desno zunanji: 75%; vzmetenje: hidravlično vzmetenje Zadnja os 3: Dvojne pnevmatike; krmilna os; profil pnevmatike levo notranji: 60%; profil pnevmatike levo zunanji: 60%; profil pnevmatike desno notranji: 60%; profil pnevmatike desno zunanji: 60%; vzmetenje: hidravlično vzmetenje Zadnja os 4: Dvojne pnevmatike; krmilna os; profil pnevmatike levo notranji: 60%; profil pnevmatike levo zunanji: 60%; profil pnevmatike desno notranji: 40%; profil pnevmatike desno zunanji: 50%; vzmetenje: hidravlično vzmetenje Zadnja os 5: Dvojne pnevmatike; krmilna os; profil pnevmatike levo notranji: 70%; profil pnevmatike levo zunanji: 70%; profil pnevmatike desno notranji: 20%; profil pnevmatike desno zunanji: 70%; vzmetenje: hidravlično vzmetenje Teže Lastna teža: 36.600 kg Nosilnost: 99.400 kg Dovoljena skupna masa: 136.000 kg Finančne informacije Cena: Po dogovoru Identifikacija Številka modela: STBZ-5VA + 3 AXLE JEEP DOLLY / E = Podatki o podjetju = VSE CENE SO NETO ZA IZVOZ. (Joris Versteijnen NL-DE-GB, Wouter Greutink NL-DE-GB-ES-IT) Govorim rusko. Trudimo se po najboljših močeh zagotoviti točne informacije. Vendar iz objavljenih besedil ni mogoče izpeljati nobenih pravic.

Stanje: novo, največja dovoljena obremenitev: 36.020 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles available for immediate or short-term delivery on our website. Partial equipment listing. Full equipment details available upon request. Gooseneck: * Gooseneck with rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Loading area with rear bevel approx. 1,000 mm x 8° * 5 pairs of outward folding lashing rings (LC 5,000 daN) Prodpfoy Auhuox Al Dsb * 3 pairs of outward folding lashing rings (LC 10,000 daN) * 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) * Hardwood flooring approx. 48 mm thick, with checker plate covering over the axles Two-part steel ramps: * One pair of galvanized two-piece steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating surface C40/5 (point load approx. 2.8 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding ramp sections and hydraulic lifting mechanism * Maximum load per pair: 30,000 kg Landing legs: * JOST landing gears (manual) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, can be activated via reverse gear and manually * Air suspension with raise and lower valve Tyres: * 235/75 R 17.5 3PMSF tyres – manufacturer at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Brake system: * WABCO brake system compliant with EU regulations with EBS-E (2S2M) without connectors to the tractor unit Steel structure: * Steel construction made from high-tensile fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system in accordance with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * HRM metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimal corrosion protection * Final coating with 2 layers of two-component topcoat, single colour in RAL 3002 carmine red, in accordance with RAL System 841GL * Rear section metalized and painted RAL 9010 (Pure White) * Wheels in silver Including accessories: * One bracket for warning signs on both sides at the gooseneck and at the rear, including socket * 1 spare wheel holder under the loading area on the right-hand side * 2" kingpin * Galvanized steel front wall * Yellow-red air couplings on the galvanized connector strip at the front * 4 wheel chocks with holders on the front wall * 3 height-adjustable wooden planks * Galvanized folding supports under the loading area bevel * Bracket for a rotating beacon at the rear of the trailer * Height-adjustable tarpaulin frame (approx. 3,960 mm) * Galvanized front wall with tensioning mechanism for sliding curtains, height-adjustable by approx. 400 mm * EDSCHA roof, forward-sliding, on aluminium roof beam profiles (bolted with front and rear wall) * 3 pairs of sliding stakes in the loading area * Superstructure can be hydraulically widened at the rear to left and right by approx. 750 mm * Sliding roof with liftable portal carrier * Sliding tarpaulin with approx. 700 mm slack in length, with tensioning straps spaced approx. 600 mm

Stanje: novo, največja dovoljena obremenitev: 47.300 kg, skupna masa: 58.000 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 8.600 mm, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Excerpt from the equipment list. Complete equipment details available upon request. Gooseneck: * Gooseneck with chamfered front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Loading area in extendable design with rear chamfer approx. 1,000 mm x 8° * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) * Recesses in the outer frame of the loading area for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate flooring above the axles Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Tyres: * Tyres 235/75 R 17.5 3PMSF, manufacturer of our choice Axles: * BPW axles, two rigid axles, two self-tracking axles, air suspension, drum brake, with lifting/lowering function * The self-tracking axles can be locked for reversing by electro-magnetic reverse lock via reverse gear or manually * Axle tools Brake system: * WABCO brake system in compliance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Psdpfx Aleyvnfge Djrb Electrical system: * Electrical system in accordance with EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Premium and durable corrosion protection for the standard shot-blasted welded frame ensured by a two-component (2K) zinc dust primer * High-quality two-component (2K) topcoat, single colour, RAL 3002 Carmine Red * Rear section metallised and painted in RAL 9010 (Pure White) * Rims in silver Accessories: * Spare wheel holder in front of the front wall (without spare wheel) * 2-inch king pin * Galvanised steel front wall approx. 400 mm high * Yellow-red air couplings on the galvanised connection strip at the front * Mount in the rear area of the gooseneck for ALU loading ramps * Galvanised folding supports under the rear chamfer of the loading area * Holder for a beacon at the rear of the trailer * On the gooseneck and at the rear end panel, left and right, holders for warning signs including socket * TPMS tyre pressure monitoring system according to ECE R 141 * On the gooseneck, plug-in aluminium side walls and tailgate, approx. 2,440 x 400 mm (L x H). The rear galvanised plug-in stanchions are removable. (Body length approx. 2,560 mm) * Galvanised toolbox integrated into the chamfered gooseneck * 3 pairs of WADER container pockets recesses in the loading area for a 20' (30') or 40' container * Sliding hooks for aluminium loading ramps at the rear of the vehicle * 6 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading area * Galvanised extensions, extendable by approx. 230 mm per side * Lift axle on the front axle with control via TEBS E depending on the current axle load and current loading status * 2 LED reversing lights mounted on the rear end panel * 2 pairs Ferry-

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 03/2017, skupna dolžina: 13.400 mm, skupna širina: 2.540 mm, skupna višina: 3.400 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17.5, medosna razdalja: 9.960 mm, barva: bela, Leto izdelave: 2017, Belgijska registracija / dokument COC. 3 x os s prisilnim krmiljenjem. Daljinski upravljalnik s kablom za dodatno krmiljenje. Hidravlične dvojne rampe. Hidravlično nastavljiva širina. Podaljški. 2 x orodjarna škatla, 89 cm. = Dodatne informacije = Konfiguracija osi Mere pnevmatik: 235/75R17,5 Zavore: bobnaste zavore Vzmetenje: zračno vzmetenje Zadnja os 1: dvojne pnevmatike; krmiljena; profil pnevmatik, leva stran, notranji: 50%; profil pnevmatik, leva stran, zunanji: 50%; profil pnevmatik, desna stran, notranji: 50%; profil pnevmatik, desna stran, zunanji: 50% Zadnja os 2: dvojne pnevmatike; krmiljena; profil pnevmatik, leva stran, notranji: 50%; profil pnevmatik, leva stran, zunanji: 50%; profil pnevmatik, desna stran, notranji: 50%; profil pnevmatik, desna stran, zunanji: 50% Zadnja os 3: dvojne pnevmatike; krmiljena; profil pnevmatik, leva stran, notranji: 50%; profil pnevmatik, leva stran, zunanji: 50%; profil pnevmatik, desna stran, notranji: 50%; profil pnevmatik, desna stran, zunanji: 50% Teže Lastna teža: 11.200 kg Dovoljena nosilnost: 38.900 kg Psdpfxez Egtvj Al Dsrb Skupna dovoljena masa: 50.100 kg Identifikacija Številka modela: MAX 110 / 3 X STEERING AXLE / HY = Informacije o podjetju = VSE CENE SO NETO ZA IZVOZ. (Joris Versteijnen NL-DE-GB, Wouter Greutink NL-DE-GB-ES-IT) Govorim rusko. Vse naše sile usmerjamo v zagotavljanje pravilnih informacij. Kljub temu iz objavljenega besedila ne moremo izpeljati nobenih pravic.

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 05/2013, vzmetenje: zrak, velikost pnevmatike: 385/55R22.5, barva: srebrn, Leto izdelave: 2013, Oprema: ABS, = Dodatne možnosti in dodatna oprema = - Zračna vzmetitev = Opombe = Prikolica Lecitrailer Guiton za prevoz živali, 3 nadstropja – sistem za dvig tovorov – krmilna os – premična tla Letnik: 16. 5. 2013 VV1F3XA0ASN153212 Prikolica za prevoz živali 3 nadstropja Sistem za dvig tovorov Dvižna tla Krmilna os = Dodatne informacije = Konfiguracija osi Mere pnevmatik: 385/55R22.5 Znamka osi: BPW Vzmetenje: zračna vzmetitev Zadnja os 1: Maksimalna obremenitev osi: 9000 kg; profil pnevmatik, leva stran: 40 %; profil pnevmatik, desna stran: 40 % Zadnja os 2: Maksimalna obremenitev osi: 9000 kg; profil pnevmatik, leva stran: 40 %; profil pnevmatik, desna stran: 40 % Zadnja os 3: Maksimalna obremenitev osi: 9000 kg; krmilna; profil pnevmatik, leva stran: 40 %; profil pnevmatik, desna stran: 40 % Prjdpfxeztwpao Al Djb Teže Lastna teža: 13.300 kg Dovoljena obremenitev: 28.700 kg Maksimalna dovoljena masa: 42.000 kg Stanje Tehnično stanje: dobro Vizualno stanje: dobro

Stanje: novo, največja dovoljena obremenitev: 38.953 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, MAX100-N-3B-9.30-U Technical Data Speed: 80 km/h Gross Vehicle Weight: 49,500 kg King Pin Load: 18,000 kg Axle Load: 31,500 kg Psdsg Sk Trjpfx Al Djrb Unladen Weight (+/- 3%): 10,547 kg Payload approx.: 38,953 kg Gooseneck Length: 3,850 mm Fifth Wheel Height (laden): 1,200 mm Loading Platform Length: 9,300 mm Extendable by: 0 mm Axle Spacing: 1,360 mm Rear Overhang Radius: 2,300 mm Loading Height at Max. Load: 860 mm Overall Width: 2,540 mm Suspension Travel: -55 / +145 mm Technical Description Gooseneck: Gooseneck with chamfered front corners 45° and rear chamfer approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood decking, 30 mm thick. Loading Platform: Hydraulically liftable and lowerable loading platform behind gooseneck, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8°. 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN). 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN). 1 pair of fold-in lashing rings to the inside on the front central beam (LC 10,000 daN). Cutouts in the side frame of the loading platform for hooking in tension belts (LC 2,000 daN). Hardwood decking approx. 48 mm thick, chequered plate lining over the axles. Ramps: Two-piece steel ramps: One pair, galvanized, approx. 2,750 + 1,400 x 800 mm with hardwood decking approx. 48 mm thick. Ramps with hydraulically foldable ramp sections, hydraulic lifting unit, and hydraulically adjustable. Maximum load per pair: 40,000 kg Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lift capacity (50 t test load). Tyres: 235/75 R 17.5 tyres as per manufacturer's choice. Axles: SAF axles, air-suspended, with drum brakes, with lifting/lowering function. The rear axle is self-steering with electro-magnetic reverse lock, activated via reverse gear or manually. Axle tools included. Brake System: Brake system in accordance with EU regulations, EBS-E (2S2M) without connecting lines to the tractor unit. Steel Structure: Steel frame constructed from high-tensile fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: Excellent and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust priming coat. High-quality 2-component (2K) top coat, single colour, in RAL shades of your choice. Rear section metallized and painted in RAL 9010 (Pure White). No metallic paint available. Electrical System: Electrical system according to EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX at the front connector bar with 24N, 24S & 15-pin sockets. Connection as per ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Included Accessories 2" king pin One galvanized steel front wall, approx. 400 mm high. Yellow-red air couplings on the galvanized connector bar at the front. 4 wheel chocks with holder on the front wall. (± 5 kg) Cable for supplying the electro-hydraulic unit and/or electric winch (35mm², 3.5 m long, max. 250A) between trailer and tractor unit with connector (ANDERSON-ANDERSON) Galvanized folding support legs under the loading platform chamfer. One bracket for rotating beacon on the rear of the trailer. Control valves for the ramps mounted on the right side of the trailer. (± 4 kg) Yellow reflective tape as per EU regulations on the sides and rear of the trailer. Electro-hydraulic unit under the rear loading platform. (± 45 kg) On the gooseneck and on the ramps left...

Stanje: novo, skupna masa: 47.000 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, Technical Data MAX510-Z-2H-ATX-A-6.85-PA Speed: 80 km/h Gross weight: 47,000 kg Fifth wheel load: 23,000 kg Axle load: 24,000 kg Gooseneck length: 3,750 mm Loaded coupling height: 1,200 mm Rear swing radius: 2,300 mm Loading platform length: 6,850 mm Extendable by: 5,500 mm Loading height at max. load: 350 mm Chassis length: 2,600 mm Chassis rear loading height at max. load approx.: 1,005 mm Suspension travel: -150/+450 mm Axle spacing: 1,360 mm Overall width: 2,540 mm Gross weight depends on fifth wheel load. Low-bed: Low-bed with external beams, extendable version "SUPER LOW" design, length approx. 6,850 mm. Low-bed with fixed hardwood floor approx. 40 mm thick and mechanical locking device. Supply lines are routed safely within the extendable beams and automatically adjust to the respective low-bed length. 5 pairs of folding external lashing rings (LC 10,000 daN). 6 pairs of threaded blocks on the inner beam for mounting screwable RUD rings. Rear chassis: Rear chassis with closed outer frame, checker plate covering, and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear. 2 pairs of folding external lashing rings (LC 10,000 daN). 1 pair of flat lashing rings in trough (LC 8,000 daN+5,300 daN). 2 pairs of stake pockets for 100 x 50 mm plug-in uprights in outer frame Gooseneck: Gooseneck in SNT design for maximizing loading area length, length approx. 3,785 mm. Gooseneck hydraulically lift/lower and detachable. Technical fifth wheel load: 23,000 kg For tractor units: 4 x 2, 6 x 2, and 6 x 4 PENDLE AXLE: "PENDLE-AXLE", all axles hydro-mechanically forced steered. Burst protection valve on axle compensation cylinder with automatic RESET function. Hydraulic cylinders with shut-off valves and locking pin for securing in lifted position. Axles finished in 2 layers of single-color 2K paint (FAY-Gray-34-0260). Technical axle load: 12,000 kg Hydraulic axle compensation. Axle tools. Brake system: Brake system according to EU regulations with EBS-E (2S2M), without connection lines to the tractor. Electrical system: Electrical system according to EU regulations, 24 Volt lighting ASPÖCK-NORDIK (ASS3), ASPÖCK-UNIBOX at the front connection panel with 24N, 24S, and 15-pin sockets. Connections according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098. Steel construction: Steel structure made of high-strength fine-grained steel. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: First-class, durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust primer. High-quality 2-component (2K) topcoat, single-color in RAL shades of choice. Rear section metallized and painted in RAL 9010 (pure white). No metallic paint available. Tyres: 245/70 R 17.5 3PMSF tyres, brand at manufacturer’s discretion. Load index (146/146F) Prepared to accommodate bolted container positioning devices for 1x 20' or 1x 40' container on the outer beams. Without container locks. - 2” king pin - Galvanized steel headboard, approx. 400 mm high - One spare wheel with holder in front of the headboard - Two wheel chocks with holder on the headboard - At the galvanized front connection panel, yellow-red air couplings - Steering from front and rear via remote cable control with push buttons, including single-track axle control (without installation on the tractor unit) Predpjizu Nwjfx Al Dob Hydraulic connections from gooseneck to low-bed

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, vrsta laserja: vlakenski laser, laserske ure: 1.347 h, laserska moč: 3.000 W, • Sodobna laserska naprava za rezanje, zasnovana po najnovejših standardih in v gantry konstrukciji z obojestranskim pogonom, ima veliko delovno površino 3000 x 1500 mm in je zato primerna za najpogostejše formate pločevine. • Avtomatska laserska rezalna glava ima funkcijo samodejnega ostrenja (motorizirana nastavitev žariščne razdalje), samodejno regulacijo višine in zaščito pred trčenjem. • Optimizirani časi priprave zaradi sistema za hitro menjavo delovnih miz in enostavne za uporabo CNC nadzorne plošče z obsežno bazo podatkov o materialih. • Vlakenski laser z močjo 3000 W zagotavlja najvišjo kakovost rezanja in produktivnost. • Zaradi laserskega vira, ki ne potrebuje vzdrževanja, ima sistem za rezanje tudi nizke stroške vzdrževanja. Celoten sistem z CNC nadzorom (CypCut) Vlakenski laser Ytterbium MAX Optično vodilo Rezalna glava za visok tlak Samodejna nastavitev žariščne razdalje Kabina za zaščito pred laserjem Samodejni sistem za hitro menjavo delovnih miz Pjdpfxjzz A A Is Al Dorb Filtrski sistem za sesanje Centralno mazanje Hladilnik za hladilno vodo Programska oprema CAD/CAM Navodila za uporabo in programiranje Ogled delujočega sistema je možen.