Polpriklopnik z nizko nakladalno ploščadjo

FAYMONVILLE MAX Trailer MAX100 Semi-Tieflader Radmulden

Stanje: rabljeno, skupna masa: 48.000 kg, največja dovoljena obremenitev: 37.575 kg, konfiguracija osi: 3 osi, prva registracija: 09/2022, naslednji pregled (TÜV): 10/2025, skupna širina: 2.540 mm, Oprema: ABS, More vehicles available at Excerpt from the equipment list. Full specification upon request. Gooseneck: - Gooseneck with front corners bevelled approx. 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring approx. 30 mm thick Loading platform: - Extendable loading platform with rear bevel approx. 1,000 mm x 8° - Between 1st and 2nd axle: one pair of built-in wheel recesses with cover, approx. 1,610 x 700 x 400 mm (L x W x D) - 1 pair of flat-mounted lashing rings at the front of the loading area (LC 10,000 daN) - 4 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) - Incl. 3-piece removable galvanized covers over the wheel recess – max. point load approx. 3.5 t each Axles: - BPW axles and suspension, 2 rigid axles, 3rd axle trailing steering - Technical axle load: 12,000 kg each - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with raise and lower valve - Axle tools Tyres: - Tyre size: 235/75 R 17.5 Gbsdpexfx R Aefx Ah Deu Landing legs: - JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t tested load) Brake system: - Brake system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Paintwork: - HRM metallization (High Resistance Metallisation), complete steel structure shot-blasted to SA2.5–SA3, then hot-finished with ZINACOR 850 (zinc 85% – aluminum 15%) - High-quality 2-component (2K) topcoat, single color RAL 3002 carmine red Included accessories: - 2-inch king pin - Galvanized steel front wall, approx. 400 mm high - Galvanized, extendable widenings, approx. 230 mm per side - Galvanized folding supports under the rear bevel of the loading area - Bracket for a revolving beacon at the rear of the trailer - Plug-in aluminum side and rear walls on the gooseneck, approx. 2,440 x 400 mm (L x H), rear galvanized stanchions removable (body length approx. 2,560 mm) - 1 galvanized toolbox, integrated into the gooseneck chamfer - Hardwood rear bumper at the gooseneck rear wall towards the loading platform - 3 pairs WADER container locks in the platform for one 20' (30') or one 40' container - 5 pairs of stanchion pockets for approx. 100 x 50 mm stanchions in the outer frame - Hardwood extension boards, maximum load permissible on an area of approx. 200 x 200 mm up to approx. 3.5 t - Galvanized holder for extension boards, left and right under the platform - Painted anti-slip sand coating on the checker plates, over the king pin and platform - 2 LED reversing lights mounted on the rear crossmember - 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear - 4 warning signs extendable by approx. 400 mm, approx. 423 x 423 mm, each with an LED position light - Load pressure gauge for axle load calculation, including load diagram - 5 pairs of galvanized plug-in stanchions, approx. 100 x 50 mm, approx. 1,000 mm high - Rack for max. 7 pairs of plug-in stanchions approx. 100 x 50 mm, at the front wall - One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering, including electro-hydraulic unit. Ramp with hydraulically folding ramp sections, hydraulically operated lifting device, and hydraulically adjustable; maximum load ...

Stanje: novo, skupna masa: 48.000 kg, največja dovoljena obremenitev: 37.710 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete range of vehicles, including immediately and soon-available vehicles, can be found on our website. Excerpt of the equipment. Complete equipment list available upon request. Gooseneck: - Gooseneck with beveled front corners approx. 45° and rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring approx. 30 mm thick Loading platform: - Telescopic loading platform with rear bevel approx. 1,000 mm x 8° - Between 1st and 2nd axle: one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Includes 3-part removable, galvanized covers over the wheel recesses (W = approx. 670 mm – max. point load 5 t/each) - 1 pair of lashing rings recessed at front of loading platform (LC 10,000 daN) - 4 pairs of outward-folding lashing rings (LC 5,000 daN) - 3 pairs of outward-folding lashing rings (LC 10,000 daN) - Cut-outs in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Axles: - BPW axles and suspension, 2 rigid axles, 3rd axle with trailing steering - Technical axle load: 12,000 kg each - Electromagnetic reverse lockout activated via reverse gear and manually - Air suspension with raise/lower valve, axle tools Tyres: - Tyres 235/75 R 17.5 3PMSF – manufacturer at our discretion Godpfew Tpq Rjx Ah Dsbu Landing gear: - JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Brake system: - Wabco brake system in accordance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Steel structure: - High-strength fine-grain steel construction - Steel quality: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system in accordance with EU regulations - Lighting 24 Volt ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection panel with sockets 24N, 24S & 15-pin connection as per ISO (24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098) Painting: - Premium, long-lasting corrosion protection of the standard shot-blasted welded frame ensured with a two-component (2K) zinc-rich primer - High-quality, single-color top coat (2K) in RAL 3002 carmine red - Rear section metallized and painted in RAL 9010 (pure white) Included accessories: - 2-inch kingpin - Galvanized steel front wall approx. 400 mm high - Spare wheel holder in front of the front wall - Yellow-red air couplings on the galvanized front connection panel - 4 wheel chocks with holders on the front wall - Mounting at the rear of the gooseneck for aluminum loading ramps - Galvanized folding supports under the loading platform's rear bevel - Holder for rotary beacon at the rear of the trailer - TPMS tire pressure monitoring system in line with ECE R 141 - Yellow reflective tape on the sides, sliding extension, and rear of the trailer according to EU regulations - At the gooseneck and rear left/right each, a holder for warning signs including sockets - 1 hardwood impact protection on the back wall from the gooseneck to the loading platform - Galvanized holder for extension boards left and right under the loading platform - 4 pairs of recessed lashing rings along the central beam (LC 5,000 daN) - 1 pair of recessed lashing rings at the rear central beam (LC 10,000 daN) - On the gooseneck, plug-in aluminum side walls and rear wall, approx. 2,440 x 400 mm (L x H) - The rear galvanized stanchions are removable (length of the body approx. 2,560 mm) - A tool...

Stanje: novo, skupna masa: 48.000 kg, največja dovoljena obremenitev: 37.820 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles, including units available immediately or at short notice, on our website. Gbsdow Tpqwopfx Ah Dsu Excerpt from the equipment list. Full specifications upon request. Gooseneck: - Gooseneck with beveled front corners approx. 45° and rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring approx. 30 mm thick Load area: - 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D) - Wheel recesses with square climbing strips approx. 15 x 15 mm and widened lower sections - Between the 1st and 2nd axle, a pair of fixed wheel recesses, approx. 1,610 x 700 x 400 mm (L x W x D) - Incl. three-part removable galvanized covers over wheel recesses (width approx. 670 mm) – max. point load approx. 5 t/piece - Recess in the chamfer and extending into the loading area for excavator bucket stick accommodation (approx. 2,900 x 750 x 210/290 mm (L x W x H)) - 1 pair of flat lashing rings at front in the load area (LC 10,000 daN) - 5 pairs of folding external lashing rings (LC 5,000 daN) - 3 pairs of folding external lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cut-outs in the outer frame of the loading area for attachment of tension belts (LC 2,000 daN) One-piece steel ramps: - One pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm, with hardwood top approx. 48 mm thick - Ramp with hydraulic lifting mechanism, hydraulically adjustable - Maximum load per pair: 40,000 kg - In accordance with Regulation 1230/2012/EU, ramps shorter than 300 mm do not count towards overall vehicle length in transport position Landing legs: - JOST mechanical landing legs with 2-speed gearbox rated for approx. 24 t lifting capacity (approx. 50 t test load) Axles: - BPW axles and suspension, 2 fixed axles, 1 self-steering axle - Technical axle load: 12,000 kg each - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with raise and lower valve - Axle tool kit Tyres: - Tyres 235/75 R 17.5 3PMSF – brand at our discretion - TPMS tyre pressure monitoring system compliant with ECE R 141. Data transmission to the truck via standardised EBS interface according to ISO 11992. The truck must support data transmission and display to ensure correct function. Brake system: - WABCO brake system in accordance with EU Regs with EBS-E (2S2M), without connection lines to the tractor unit Steel construction: - High-strength fine-grain steel construction - Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical system: - Electrical system per EU regulations - Lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lamps flash with the indicators - ASPÖCK-UNIBOX at the front connector panel with sockets: 24N, 24S & 15-pin, per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: - Complete steel structure automatically blasted with a shot-blast machine after welding - Second sand blasting with corundum for optimal coating adhesion - HRM-metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection - Topcoat: two layers of 2K top paint, single-color in RAL 3002 Carmine Red according to RAL System 841GL - Rims in silver - Rear section metallised and in RAL 901