Polpriklopnik z nizko nakladalno ploščadjo

FAYMONVILLE Faymonville MAX 710 Tiefbett 2+4 PA - Baggerbett

Our complete vehicle inventory, including immediately and short-term available vehicles, can be found on our website.
Rcjdpfexbmpljx Anpjh

Excerpt from the equipment specification. Full equipment details available upon request.

Gooseneck:
* Hydraulically liftable/lowerable and detachable gooseneck, length approx. 3,650 mm
* 2 pairs of fold-out lashing rings on the exterior (LC 5,000 daN)
* 2 pairs of lashing rings on the gooseneck (LC 10,600 daN)
* 1 pair of lashing rings in the center of the gooseneck (LC 10,600 daN)
* Suitable for tractor units 6 x 4 or 8 x 4, 2-axle

Compact front bogie:
* Hook coupling front and rear, length approx. 2,200 mm
* Bogie width: approx. 2,850 mm

Excavator deck:
* Telescopic excavator deck with drive-over deck hooks at the front and pin-eye coupling at the rear
* Base width: approx. 2,850 mm
* Length: approx. 6,650 mm
* Beam height: approx. 400 mm
* Beam width: approx. 1,350 mm
* Loading height approx. 550 mm with ground clearance approx. 150 mm

4-axle rear bogie:
* Mechanical pin-eye coupling at the front for connecting a low-bed trailer
* Rear end cross member, bogie width: approx. 2,850 mm
* Bogie length: approx. 5,480 mm

Oscillating axles, all axles hydro-mechanically forced-steered
* Technical axle load: 14,640 kg per axle (62 km/h)
* Hydraulic axle compensation

Tyres:
* Front bogie: 8 x (manufacturer’s choice; M+S) 285/70 R19.5
* Rear bogie: 16 x (manufacturer’s choice; M+S) 285/70 R19.5
* Load index 150/148J

Paintwork:
* Complete steel structure automatically shot-blasted after welding using a turbine blasting unit. Second abrasive blasting with corundum for optimum coating adhesion
* Full chassis HRM-metalized with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection
* Final coating in 2 layers of 2-component top coat, single color in RAL 3002 carmine red, according to RAL 841GL system

Including the following accessories:
* Steel front wall, approx. 400 mm high
* Plug-in ALU side panels and rear wall on the gooseneck, approx. 400 mm high, anodized finish
* 3.5-inch kingpin
* Truck hydraulic connection with flow controller (20 l/min)
* Overhead support for supply lines; tractor unit tank must hold at least 80 l
* With MAX Trailer coupling pieces; otherwise, couplings to be supplied by the customer ex works
* BEKA-MAX centralized lubrication for gooseneck with standard grease NLGI-2
* Tool kit Art No. 612452
* Multi-coupling hydraulic connections on the gooseneck
* Front bogie with separate air connection for air-powered tools
* BEKA-MAX centralized lubrication for 2-axle bogie with standard grease NLGI-2
* One 7-pin socket each left and right at the rear of the front bogie for warning panels
* Threading option (ø approx. 40 mm) every approx. 500 mm on the outside of the top flange of the excavator deck outer tube for screw rings (LC 16,000 daN)
* Foldable extensions with steel mats, width adjustable from approx. 2,850 mm to approx. 3,250 mm
* BEKA-MAX centralized lubrication for 4-axle bogie with standard grease NLGI-2
* Socket on the rear bogie for cable remote control of rear steering
* Rear bogie with trough
* Two stainless steel toolboxes, approx. 855 x 340 x 390 mm, mounted on the gooseneck left and right
* Single-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery

* Radio remote control:
* Operation of the power pack, start/stop of the diesel engine
* Operation of the rear steering, in addition to cable remote control

* One LED work spotlight each left and

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.