Polpriklopnik z nizko nakladalno ploščadjo

FAYMONVILLE Mega-Z-3H-V-AT-A-25ZT-6.50(2.74)-17.5-2.75-PA-13

Stanje: novo, največja dovoljena obremenitev: 49.000 kg, skupna masa: 60.800 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with front corners chamfered at 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Extendable Loading Platform: - Loading platform, extendable design with rear chamfer of approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) - 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, checker-plate covering above the axles Two-Part Removable Ramps: - One pair of galvanized two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramps with hydraulically folding ramp sections, hydraulic lifting mechanism, and hydraulic side-shift - Maximum load per pair: 40,000 kg Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles, two fixed axles and two steering axles (self-steering), air suspended, with drum brakes, raise/lower function - Self-steering axles with electro-magnetic reverse lock, can be activated by reverse gear or manually - Axle tool kit - Tyre size 235/75 R 17.5 Brake System: - Braking system according to EU regulations with EBS-E (4S3M) Steel Structure: - Steel structure made of high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Paintwork: - First-class, long-lasting corrosion protection of the standard shot-blasted welded frame ensured by a 2-component (2K) zinc dust primer Csdpfx Afoh Etf Re Dsgu - High-quality single-tone topcoat using 2-component (2K) paint in Nova grey Electrical System: - Electrical system according to EU regulations, 24 volt lighting, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX on the front connector strip with 24N, 24S, and 15-pin sockets Included Accessories: - 2" kingpin - Galvanized steel front wall, approx. 400 mm high - One spare wheel with holder in front of the headboard - Yellow-red air couplings on the galvanized front connector strip - 4 wheel chocks with holders on the front wall - Mount at the rear section of the gooseneck for ALU approach ramps - Galvanized folding supports underneath the loading platform chamfer - One holder for warning beacon - Cover plates to bridge the gap between ramps and loading platform - White reflective tape on the side, red on extension and rear, according to EU regulations - Electro-hydraulic power unit - At the gooseneck and ramps (left/right) a holder each for warning signs including socket - Control valves for the ramps mounted on the right side of the trailer - One mud flap at the rear of the trailer - Manual and documentation on USB stick - On the gooseneck, plug-in ALU side boards and rear wall approx. 2,440 x 400 mm - Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm) - 4 pairs of WADER container pockets in the loading platform for one 20ft, two 20ft or one 40ft container - 7 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading platform - Galvanized, extendable platform wideners approx. 230 mm per side - Lift axle on the front axle with control system - 20 x 20 mm square climbing bars - BEKAMAX central lubrication system - Four warning signs extendable by approx. 400 mm eac

Leto izdelave: 2021, stanje: novo, številka stroja/vozila: 2021102613, Aluminum angled conveyor belt with supporting frame Conveyor length: 2000 mm straight + 2200 mm inclined Incline angle at the bend: 45° Discharge height: approx. 1800 mm Height of the horizontal section: 200 mm (top edge) Cgodpeh Eld Ejfx Af Dsu PU conveyor belt Conveyor belt type: EM 9/2 0+05 PU petrol matt Belt width: 500 mm 21 pcs. T30 cleats welded on — pitch 310 mm * Antistatic due to threads woven into the running side Endless welded with stepped finger joint 40 mm wave edge, high-frequency welded on both sides * Edge-free zone on both sides for belt tracking in the incline Full-surface support sheet Drive: Motor approx. 1.1 kW Belt speed approx. 0.4 m/sec * Optional control via frequency inverter Connection 220/400V, 50Hz, protection class IP54

Stanje: novo, največja dovoljena obremenitev: 50.400 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment specification. Full specification available on request. GOOSENECK * Gooseneck in SNT design to optimize platform length, approx. length 3,700 mm, with rear bevel of approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection rail with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches Cgedpfxjtx Nwnj Af Dsu * 1 pair of detachable ALU side walls, approx. 400 mm high, anodized finish * 1 detachable ALU rear wall, approx. 400 mm high, anodized finish * Over the gooseneck, approx. 40 mm thick hardwood flooring, over the king pin with checker plate covering * 2-inch king pin * Mount at the rear of the gooseneck for ALU drive-on ramps * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) LOAD PLATFORM * Extendable load platform, approx. length 8,800 mm, with rear bevel approx. 500 mm x 10° * Recess in platform and rear bevel for accommodating an excavator dipper stick, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st axle self-steering, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reversing lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * Tires: 235/75 R 17.5 3PMSF twin tires * Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B - static test load = approx. 50,000 kg * Platform with continuous and between-axles interrupted 50 mm thick hardwood flooring (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable galvanized side extensions by approx. 230 mm each side (without wooden planks) * Wheel wells with square climbing strips, approx. 15 x 15 mm in front of the axles, continuous opening up to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * Widenable U-profiles for inserting ALU covers: - on the fixed section behind the gooseneck - on the intermediate table - on the extendable platform * Wheel wells with square climbing strips, approx. 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with single-track monitoring of the axles, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-part steel ramps, type: DR-15/60-900-4350-KG-HV-M, approx. length 4,350 mm and width approx. 900 mm * Hydraulically folding ramp tips * Ramps hydraulically adjustable individually by approx. 235 mm outward and approx. 215 mm inward * Super Grip rubber surface approx. 25 mm and steel surface approx. 5 mm as additional

Stanje: rabljeno, Leto izdelave: 2007, Pressure: 100 t Stroke: 500 mm Table surface: 900 x 600 mm Rapid traverse: 22 mm/s Stroke speed: 2 mm/s Ram surface: 700 x 350 mm Total power requirement: 2.2 kW Machine weight: approx. 1.6 t Required space: approx. 1.9 x 0.85 x 2.3 m Cedpjvprv Rjfx Af Djgu Hydraulic workshop press This machine is the Italian make SICMI, which was distributed by Knuth.

Stanje: novo, številka stroja/vozila: 1, lastna masa: 11.000 kg, največja dovoljena obremenitev: 28.000 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 870 mm, vzmetenje: zrak, velikost pnevmatike: 245.70 r 17.5, barva: temno rdeča, Leto izdelave: 2020, Oprema: ABS, New Ceylan low-loader trailer, ready for registration. 3 axles, with first axle liftable and third axle steering. Equipped with EBS, full-width double hydraulic ramps, widening devices, winch preparation, loading deck height 87 cm, loading area length 9.95 m, total length 13.65 m. RUD lashing points. Immediate delivery subject to prior sale. Warranty included. Dealer: INTERDRIVE SRL - PARMA. Codpfxoh S Aw Ro Af Degu

Stanje: novo, največja dovoljena obremenitev: 67.200 kg, skupna masa: 85.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment features. Full equipment details upon request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm long, with a rear chamfer approx. 1,000 mm x 10° * For tractor units: 6x2, 6x4, and short 8x4 * Plug-in steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish * One plug-in ALU rearboard, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood flooring above the gooseneck, checker plate flooring above the king pin * 3.5 inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. bracket for suspension of supply lines (Faymonville couplings) * 2 pairs of stake pockets sunk into the gooseneck, for plug-in stakes approx. 100 x 50 mm LOADING DECK * Extendable loading deck, length approx. 11,000 mm, rear chamfer approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced lock positions, supply lines are routed protected in the extendable beams and automatically adjust to the respective platform length * BPW axles and suspension, 1st axle steerable, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Tyres: 235/75 R 17.5 3PMSF, twin tyres * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous 50 mm thick hardwood flooring on the loading deck, interrupted between the axles (increases coefficient of friction) * Slotted holes for attachable and re-positionable bridging elements: - on the fixed section behind the gooseneck - at the front of the loading area * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate flooring, slotted holes front and rear for attachable and repositionable bridging elements Cgedpfx Aergzv Njf Dju * 1 pair of recessed horizontal lashing rings at the front of the fixed platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the deck, fold-out to the outside (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering operated from both front and rear via cable remote control, with axle tracking control, no installation in the tractor unit * 1st axle with automatic lift-axle function and start-up aid according to EU Directive 2021/535 * Under the gooseneck and on the rear cross member, one 7-pin socket each on left and right, with bracket for warning signs * Painted sand coating on the outer frame of the platform as well as on the checker plates of the platform and in the transition area between the loading deck

Leto izdelave: 2023, stanje: novo, Device: Excavator arm Cgsdpfxsn Tmy Rj Af Dju

Stanje: rabljeno, Leto izdelave: 2015, obratovalne ure: 6.850 h, moč: 129 kW (175,39 KM), velikost sprednje pnevmatike: 600/70R28, velikost zadnje pnevmatike: 710/70R42, Oprema: zavorni sistem na stisnjen zrak, OPERATING HOURS: 6,800 / AUTOPOWR / IVT - 50 KM/H / COMMANDCENTER DISPLAY AUTO-TRAC READY / JDLink COMPATIBLE / 4600 PROCESSOR / CAB PR.-CV CAB WITH COMMAND ARM STANDARD SEAT / MIRRORS – MANUALLY TELESCOPIC PANORAMA WINDSCREEN WITH POWER DOOR / STANDARD RADIO / HYD Cedpfx Afou Rvklj Degu

Stanje: rabljeno, Leto izdelave: 2022, obratovalne ure: 2.700 h, Oprema: pogon na vsa štiri kolesa, Caterpillar 434 Cedpfxjxpqgqs Af Degu Bager-nakladač 2.700 delovnih ur * Model: 434 * Leto izdelave: 2022 * Obratovalna teža: 9.520 kg * Odlično stanje

Stanje: rabljeno, 🧰 Caractéristiques du produit • Fabricant : Palflex • État : occasion • Couleur : orange • Hauteur : 400 cm • Profondeur : 110 cm • Charge par travée : 24 000 kg • Longueur des lisses : 410 cm • Capacité de charge par lisse : 3 000 kg par niveau L’offre comprend : • 11 cadres pré-montés, profondeur 110 cm, hauteur 4 m • 40 lisses, longueur 4,1 m, capacité 3 000 kg par niveau • 80 dispositifs de verrouillage • 44 chevilles béton • 1 plaque de capacité de charge par rangée de rayonnage Protections d’angle d’occasion disponibles immédiatement, supplément de 15 € HT/unité ! Retrouvez d’autres accessoires dans notre catalogue d’accessoires. 💰 Prix : 2 790 € HT, hors TVA • Remise sur quantité : sur demande • Frais d’expédition : Europe sur demande • Délai de livraison : disponible immédiatement • Visite et enlèvement : possibles à tout moment sur rendez-vous Plus de 5 000 m linéaires de rayonnages à palettes de nombreux fabricants toujours en stock. Cedpfovfnqvjx Af Djgu (Sous réserve de modifications, erreurs et vente intermédiaire ! Voir nos CGV, tous prix hors TVA, départ entrepôt.)