Polpriklopnik z nizko nakladalno ploščadjo

FAYMONVILLE 3-Achs-Tiefbett 3x10 t Außenträger

Our complete inventory of immediately and short-term available vehicles can be found on our website.

Excerpt from the equipment list. Full specification available on request.

Gooseneck:
* Gooseneck in SNT design to optimize loading deck length, approx. 3,750 mm long
* Gooseneck hydraulically liftable/lowerable and detachable
* For tractor units: 6 x 4 or 8 x 4

Lowbed:
* Lowbed with exterior beams, extendable, SUPER LOW design, approx. 8,000 mm long
* Lowbed with fixed hardwood flooring approx. 40 mm thick and mechanical locking
* Supply lines routed protected within the extendable beams, automatically adapting to the lowbed length
* 7 pairs of folding lashing rings outward (LC 10,000 daN)
* 6 pairs of threaded mounting blocks on the inner beam for screwable RUD rings

Rear chassis:
* Rear chassis with closed outer frame and tread plate cover
* Chassis with excavator recess, closed in the rear half to house air tanks
* 3 pairs of folding lashing rings outward (LC 5,000 daN)
* 1 pair of folding lashing rings outward (LC 10,000 daN)
* 1 pair of horizontal lashing rings, positioned front & rear on the chassis (LC 10,000 daN)

Axles:
* BPW axles and suspension, all axles with hydro-mechanical forced steering
* Technical axle load: 12,000 kg each
* Air suspension with lifting and lowering valve

Tyres:
* Tyres 245/70 R 17.5 3PMSF – manufacturer at choice. Load index (146/146F)

Braking system:
Hedpfx Ahsy Uwu Io Hont
* WABCO braking system according to EU regulations with EBS-E (2S2M)

Coating:
* HRM metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure optimal corrosion protection
* Finished with 2 coats of 2K paint, single-colored in RAL 3002 Carmine Red, per RAL System 841GL

Includes accessories:
* 2-inch kingpin
* One galvanized steel front bulkhead, approx. 400 mm high
* At the galvanized front connection strip, yellow-red air couplings
* Remote axle steering, from front and rear, operated by cable remote control with push buttons, including axle alignment monitoring (without installation on the tractor unit)
* Preparation for bolt-on container lockings to accommodate 1 x 20', 1 x 40', or 1 x 45' container on the outer rails. Without container locks
* Hydraulic connections from gooseneck to lowbed with a multicoupling instead of screw couplings
* Electrohydraulic unit
* Spiral cable (approx. 35 mm², approx. 3.5 m in length, max. 250A) for the power supply to the electrohydraulic unit and/or the electric winch, with plug connection (NATO-NATO) between trailer and tractor unit
* Yellow reflective tape according to EU regulations, on the sides, extension, and at the rear of the trailer
* At the gooseneck front and rear left and right, each with a holder for warning signs, including socket
* Manual and documentation on USB stick
* Central lubrication system with 2 pumps BEKAMAX (Pico) with standard grease NLGI-2 and removable protection for the pumps
* 7 pairs of threaded blocks between the lashing rings under the top flange on the outer rail for mounting screwable RUD rings VLBG-4
* 2nd ride height, approx. 50 mm above standard ride position, selectable via manual control
* On the gooseneck, plug-in ALU side and rear walls approx. 2,440 x 400 mm (L x H). The rear, galvanized plug-in stanchions are removable (superstructure length approx. 2,560 mm)
* Separate air connection with air gun on the gooseneck
* A stainless steel toolbox, INOX, approx. 1,350 x 400 x 400 mm

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.