Polpriklopnik z nizko nakladalno ploščadjo

FAYMONVILLE MAX Trailer MAX510 Tiefbett 2x10 t

Stanje: novo, skupna masa: 43.000 kg, največja dovoljena obremenitev: 30.190 kg, konfiguracija osi: 2 osi, Oprema: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Sample of equipment included. Full equipment list available on request. Loading platform: * Low-bed with external beams, extendable in SUPER LOW design, length approx. 6,850 mm * Low-bed with fixed hardwood floor approx. 40 mm thick and mechanical locking mechanism * Supply lines are routed protected within the extendable beams and automatically adapt to the respective low-bed length * 5 pairs of lashing rings, outward-folding (LC 10,000 daN) * 6 pairs of threaded blocks on the inner beam for mounting bolted RUD rings Gooseneck: * Gooseneck in SNT design to optimize loading platform length, approx. 3,750 mm * Gooseneck hydraulically lift/lowerable and detachable * Technical fifth-wheel load: 23,000 kg * For tractor units: 4x2, 6x2 Rear assembly: * Rear assembly in short version, with closed external frame and checker plate cover * Assembly with excavator trough, closed at the rear for accommodation of air tanks * 2 pairs of outward-folding lashing rings (LC 5,000 daN) * 1 pair of outward-folding lashing rings (LC 10,000 daN) * 1 pair of flat-mounted lashing rings, fitted at front & rear of the assembly (LC 10,000 daN) Axles: * BPW axles, hydro-mechanically forced steered * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve Tyres: * Tyres 245/70 R 17.5 3PMSF * Make of our choice * Load index (146/146F) * TPMS tyre pressure monitoring system according to ECE R 141 * Data transmission to the towing vehicle via standardized EBS interface as per ISO 11992 Djdpjxarl Nefx Ag Neku * For correct display, the towing vehicle must be capable of transmitting and showing this data Brake system: * Brake system in accordance with EU regulations with EBS-E (2S2M) Electrical system: * Electrical system as per EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash together with turn signals * ASPÖCK-UNIBOX at the front connection strip with sockets 24N, 24S & 15-pin connection as per ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel structure: * Steel structure made of high-strength, fine-grained steels * Steel grades: * S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Painting: * Complete steel structure shot-blasted automatically with blast wheel machine after welding * Second blasting with corundum for optimal coating adhesion * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for best corrosion protection * Top coating in 2 coats of 2K topcoat, single color in RAL 3002 carmine red, according to RAL System 841GL * Rims in silver * Rear section metallized and painted in RAL 9010 (pure white) * Metallic finishes not possible * Paint system tested according to salt spray test ISO 9227-NSS * Cavities sealed with special wax Including the following additional equipment: * 2-inch king pin * A galvanized steel front wall, approx. 400 mm high * Remote steering front and rear via cable remote control with push buttons, including axle tracking control (without installation on the tractor unit) * Hydraulic connections from gooseneck to low-bed with multi-coupling instead of screw couplings * Electro-hydraulic unit * Prepared for the installation of bolted container positioning devices for 1x 20' or 1x 40' container on t

Stanje: novo, skupna masa: 43.000 kg, največja dovoljena obremenitev: 30.235 kg, konfiguracija osi: 2 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, including immediately and short-term available vehicles, can be found on our website. Specification excerpt. Full specifications available upon request. Specification excerpt: * Chassis with excavator trough * Lowbed platform with central beam, extendable design, length approx. 6,000 mm Gooseneck * Hydraulically liftable/lowerable, as well as detachable Axles * BPW axles * Hydro-mechanically forced steering Brake system * Wabco in compliance with EU regulations with EBS-E (2S2M) Air suspension * With lift and lowering valve Tyres Dodpjrirzqsfx Ag Neku * 245/70 R 17.5 3PMSF load index (146/146F) Including accessories: * 2-inch king pin * 1 pair of one-piece steel ramps for forestry machines, approx. 2,000 x 700 mm, with hydraulic lifting equipment * One galvanized steel front wall, approx. 400 mm high * Steering override from the front and rear controllable via cable remote control with push buttons * Electro-hydraulic power unit * Load manometer for axle load determination including load chart * On the gooseneck, removable aluminium sidewalls and rear panel, approx. 2,440 x 400 mm (L x H) * Hydraulic couplings from gooseneck to lowbed via multi-coupling * 1 pair of galvanized steel approach ramps with cleats from lowbed to chassis * Load area with coated sand layer as anti-slip protection * 2 LED reversing lights mounted on the rear plate * Central lubrication system with 2 BEKAMAX (Pico) pumps * Acoustic warning signal when reversing Paintwork * HRM Metallisation (High Resistance Metallisation) * Single-colour paint in MB 7350 novagrau