Faymonville F-S43-1Aaf Multimax Tieflader,Radmulden 45 T. nakup rabljenega (90.721)

Stanje: rabljeno, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2017, * SAF osi * Kolesni jaški * Hidravlične nakladalne rampe nastavljive po širini * Zračno vzmetenje * Razširljiv * Lastna teža: 11.020 kg -----Interna številka vozila: 11010----Pridržujemo si pravico do napak in vmesne prodaje. Ncjdpfx Agjwta Aloxer WhatsApp podpora na voljo! Za vprašanja o vozilu ali dodatne informacije nam pišite preko WhatsAppa. WhatsApp nemščina, angleščina -- WhatsApp nemščina, angleščina, arabščina

Stanje: rabljeno, Leto izdelave: 2014, Contact Theo Lelie for further information. Ncedpoxtqkwefx Agxer

Stanje: novo, največja dovoljena obremenitev: 36.360 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from the equipment list. Full equipment details available upon request. Neck (Gooseneck): * Gooseneck with front corners tapered approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Extendable loading area with rear bevel approx. 1,000 mm x 8° * 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm (L x W x D) * Wheel recesses with square profile climbing strips approx. 15 x 15 mm as well as lower-width extensions * Between the first and second axle: one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) * Incl. 3-piece removable galvanized covers over the wheel recesses (approx. 670 mm wide) – max. point load 5 t/each * Recess in the bevel as well as projecting into the loading area for excavator dipper stick accommodation (approx. 2,900 x 750 x 210/290 mm [L x W x H]) * 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 2 pairs of fold-out lashing rings (LC 10,000 daN) * 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) * Cutouts in the outer frame of the loading area for fastening ratchet straps (LC 2,000 daN) Two-part steel ramps: * One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm hardwood covering * Ramp with hydraulically folding ramp sections and hydraulic lifting mechanism, hydraulically movable * Maximum load per pair: 40,000 kg Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lifting and lowering valve Tyres: * Tyres 235/75 R 17.5 3PMSF – manufacturer of our choice TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Braking system: * WABCO braking system in accordance with EU regulations with EBS-E (2S2M) Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure the best corrosion protection * Final painting with 2 coats of 2-component topcoat, single-colour in RAL 3002 Carmine Red, according to the RAL 841GL system Ncodeyhkq Uopfx Agxor * Rims in silver grey Including the following additional equipment: * 2" kingpin * Galvanized steel front wall, approx. 400 mm high * 3 pairs of recessed lashing rings along the central beam (LC 5,000 daN) * Rear electro-hydraulic unit, under the loading area * On the gooseneck, aluminium side and rear plug-in walls, approx. 2,440 x 400 mm (L x H). The rear galvanized stanchions are removable. (Superstructure length approx. 2,560 mm) * One galvanized toolbox integrated in the tapered gooseneck * 2 pairs of WADER container pockets in the loading area for one 20' or 30' container * 3 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading area * 3 additional pairs of removable, galvanized covers over the wheel recess – max. point load 3.5 t/pc * One removable galvanized intermediate table with 1 pair of WADER container pockets * 1 additional, hang-in intermediate table, approx. 300 mm wide * Interm

Stanje: novo, največja dovoljena obremenitev: 37.820 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment. Complete specification available on request. Gooseneck: - Gooseneck with front corners beveled approx. 45° and rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring approx. 30 mm thick Loading Platform: - 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D) - Wheel recesses with square climbing stripes approx. 15 x 15 mm, including widenings at the bottom - Between the 1st and 2nd axles, one fixed pair of wheel recesses approx. 1,610 x 700 x 400 mm (L x W x D) - Incl. 3-part removable galvanized covers over the wheel recesses (W approx. 670 mm), max. point load approx. 5 t/piece - Recess in the bevel and extending into the loading platform for accommodating excavator stick (approx. 2,900 x 750 x 210/290 mm (L x W x H)) - 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of folding-out lashing rings (LC 5,000 daN) - 3 pairs of folding-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cut-outs in the outer frame of the platform for attaching tension belts (LC 2,000 daN) One-Piece Steel Ramps: - 1 pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood covering - Ramp with hydraulic lifting system, hydraulically adjustable - Maximum load per pair: 40,000 kg - In accordance with Regulation 1230/2012/EU, ramps shorter than 300 mm do not need to be considered in the vehicle length in transport position Landing Gear: - JOST landing gears (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t test load) Axles: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load per axle: 12,000 kg - Electro-magnetic reverse lockout, activated via reverse gear and manually - Air suspension with raise/lower valve - Axle tool Tyres: - Tyres 235/75 R 17.5 3PMSF, brand of our choice - TPMS tyre monitoring system as per ECE R 141. Data transmission to the tractor unit via the standardized EBS interface according to ISO 11992. To display correctly, the tractor unit must be able to receive and show this data. Brake System: - WABCO brake system in compliance with EU regulations, with EBS-E (2S2M) without connecting lines to the tractor unit Steel Construction: - Steel structure made from high-tensile fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355MPa); S690QL/S700MC (yield strength 690MPa) Electrical System: - Electrical system in accordance with EU regulations Ncodpfjw Tpqwjx Agxer - 24 Volt lighting ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at the front terminal bar with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: - Complete steel structure automatically shot blasted with a turbine blasting system after welding - Second blasting process with corundum for optimum coating adhesion - HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for optimal corrosion protection - Final paint with two layers of 2K topcoat, single color in RAL 3002 Carmine Red, according to the RAL 841GL system - Rims in silver - Rear section metallized and in RAL 9010 (con...

Stanje: novo, največja dovoljena obremenitev: 38.140 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our full range of immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment list available on request. Gooseneck: - Gooseneck with approx. 45° chamfered front corners and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Approx. 30 mm thick hardwood flooring Loading platform: - Telescopic loading platform with rear slope approx. 1,000 mm x 8° - Between the 1st and 2nd axle, a pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece, removable, galvanized cover over the wheel recesses (W approx. 670 mm – max. point load 5 t / each) - 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) - 4 pairs of folding external lashing rings (LC 5,000 daN) - 3 pairs of folding external lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: - 235/75 R17.5 3PMSF tyres, manufacturer of our choice - TPMS – Tire Pressure Monitoring System according to ECE R 141 - Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992 - The tractor unit must be capable of transmitting and displaying these data for correct indication. Axles: - BPW axles and suspension, 2 axles fixed, 3rd axle trailing steer - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve. Axle tools Braking system: - WABCO braking system in accordance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor Electrical system: Njdpfx Aew Tpq Dogxscr - Electrical system in accordance with EU regulations - LED lighting 24 volts ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicators - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel construction: - Steel construction made from high-strength fine-grained steel - Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Painting: - Entire steel structure automatically shot-blasted with shot-blast machine after welding - Second blasting with corundum for optimal coating adhesion - HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% Zinc / 15% Aluminum) to ensure best corrosion protection - Final coating with 2 layers of 2K top coat, single color RAL 3002 Carmine Red. Rear section metallized and painted in RAL 9010 (Pure White) - Metallic paint not possible - Paint system tested in salt spray test according to ISO 9227-NSS - Cavities sealed with special wax Including the following accessories: - On both the gooseneck and at the rear left and right, one holder for warning boards, including socket - Spare wheel holder in front of the bulkhead (without spare wheel) - 2" king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings at the galvanized connection panel at the front - Galvanized folding supports under the rear slope of the loading platform - Hardwood rear impact protection from gooseneck rear wall to loading platform - 1 pair of recessed lashing rings along the central frame at the rear in the slope (LC 10,000 daN) - On the gooseneck, aluminum side and rear walls

Stanje: rabljeno, lastna masa: 11.550 kg, največja dovoljena obremenitev: 30.450 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2019, naslednji pregled (TÜV): 01/2027, dolžina tovornega prostora: 13.450 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 700 mm, prostornina tovornega prostora: 23 m³, vzmetenje: zrak, barva: rdeča, Leto izdelave: 2018, vrsta prenosa: mehanski, Oprema: ABS, Lastna masa: 11.550 kg, dovoljena skupna masa: 42.000 kg, tovorni prostor (D Š V): 13.450 mm x 2.540 mm x 700 mm, volumen tovornega prostora: 23 m³, zračno vzmetenje, dvižna os: 1. os, elektronski zavorni sistem EBS, sledilno krmiljenje: 3. os, dvojna montaža pnevmatik, minimalna dolžina 13,45 m, maksimalna dolžina 18,20 m, lastna masa 11.550 kg, obremenitev sedla 18.000 kg, skupna masa 48.000 kg, izjemno dovoljenje DE, izvlečno, hidravlične nastavljive rampe, 3. os prisilno vodena, dvojne pnevmatike 235/75R17,5, vitel, tehnični pregled do 01-2027, YAMT13XXXJ0102830, Nezavezujoča ponudba, napake in vmesna prodaja pridržane. Slika ni nujno enaka ponudbi. Ncedpfxoy Dng Ts Agxer

Stanje: novo, največja dovoljena obremenitev: 36.410 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, including vehicles available immediately or at short notice, can be found on our website. Excerpt from the equipment. Full equipment details available on request. Nsdpfx Ajy Auh Iegxecr GOOSENECK: * Gooseneck in SNT design to optimize load bed length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Steel front bulkhead, removable, approx. 400 mm high * ASPÖCK-UNIBOX * 3 kW electric-hydraulic unit for hydraulic operations, excluding hydraulic winches * Approx. 40 mm thick hardwood cover above the gooseneck * 2-inch kingpin * Guide plate from the gooseneck for the fifth-wheel plate, approx. 500 mm wide * Receptacle at the rear of the gooseneck for aluminum drive-on ramps * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 4 wheel chocks with holders in front of the bulkhead * 1 pair of stake pockets embedded in the gooseneck, for plug-in stakes approx. 100 x 50 mm (inner chassis rail) EQUIPMENT: * Load bed approx. 8,800 mm long, extendable version approx. 4,100 mm, with rear taper approx. 500 mm x 10° * Recess in the load bed including the rear slope to accommodate the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Pneumatic locking with conical locking bolts and reinforced locking positions, with protected supply lines inside the extendable beams, automatically adapting to the respective load bed length * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steering-following * 3rd axle with electromagnetic reverse lock, activating via reverse gear or manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires. Make at our discretion * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous and between-axle interrupted approx. 50 mm hardwood planking on load bed (increasing coefficient of friction) * 1 cross table, approx. 300 mm wide, for the extendable tube with large cross-section; cross table with offset load bed and extendable mounting rails for aluminum bridging elements * Load bed locking with conically welded locking profiles every approx. 250 mm, including pretensioning plate * 1 pair of lashing rings on front crossbeam (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the load bed, foldable outwards (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck crossbeam, approx. 700 x 410 mm (W x D) * Wheel recesses with approx. 15 x 15 mm square climbing strips and widened sections at the lower area (if vehicle is fitted with extendable widenings) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the load bed between 1st and 2nd axle * Wheel recesses with approx. 15 x 15 mm square climbing strips and widenings in lower area * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axle, can also be used as widening planks (if vehicle is fitted with extendable widenings) * Aluminum elements lockable on the extension beams of the widenings * 1 pair of mechanical rear supports * 1st axle with traction aid * Sandblasted and painted in single color according to RAL code

Stanje: novo, največja dovoljena obremenitev: 36.500 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete stock of immediately and short-term available vehicles on our website. Excerpt from the equipment: Complete equipment details available upon request. GOOSENECK: * Gooseneck in SNT design to optimize the loading platform length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 6° * For tractor units: 4 x 2 and 6 x 2 * ASPÖCK UNIBOX * Grating surface with 5 mm steel plate reinforcement on the gooseneck and rear chamfer * 2-inch kingpin * Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide * Round NATO socket on the front connection strip (Maeler & Kaege VG 96 917) * On the gooseneck: 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized * 1 LED work light mounted top left and right on the front wall, wired to the connection strip for the tractor LOADING AREA: * Loading area approx. 9,600 mm long, rear chamfer approx. 900 mm x 6° * Loading area behind gooseneck hydraulically liftable and lowerable, approx. 3,000 mm, loadable up to approx. 9,000 kg * Continuous grating surface with 5 mm steel plate reinforcement on lifting bed and loading area, rated for point loads TYRES: 235/75 R 17.5 3PMSF twin tyres. Brand of our choice * TPMS tyre pressure monitoring system according to ECE R 141 AXLES: * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steered * 3rd axle with electromagnetic reverse lock, can be activated by reverse gear or manually * 1st axle with start-up aid * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve HYDRAULIC LOADING RAMPS: * 1 pair of two-part AXS steel ramps with grating surface, approx. 4,920 mm long, approx. 900 mm wide * Hydraulically folding ramp tips * Ramps can be hydraulically shifted individually approx. 235 mm outward and approx. 365 mm inward * Flashing beacons on the outer edge of the ramp tips, switch located next to ramp control * Ramp locking in driving position via quick-release * Sand coating painted on external frame of the ramp and on the ramp tip * Mechanical lateral drop leg supports in the ramps for docking to unloading ramps * Hydraulic ramp control valves on the right side of the vehicle BRAKE SYSTEM: WABCO EBS-E brake system according to EU regulations SURFACE TREATMENT: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection PAINTWORK: * Trailer carmine red (RAL 3002) * Wheels silver grey * Sideboards natural aluminium * Wheel hubs according to axle manufacturer * Light panel pure white (RAL 9010) EQUIPMENT: * Front wall made of steel, removable, approx. 1,600 mm high, incl. connection strip for supply lines to the tractor, mounted approx. 1,000 mm from the lower edge of the outer frame * Lashing chain attachment points on inner left/right of the front wall, incl. Alu tray underneath left/right for storing chains or straps * Behind the front wall screwed-on DELIGNIT panel (approx. 12 mm thick) Ncedpfx Aey Auhhogxjr * 2 additional pairs of bolted lashing rings (LC 5,000 daN) * Electric cable winch, approx. 5,400 kg pulling force, with radio remote control. Steel rope approx. 24 m long, rope ø approx. 9.5 mm, incl. rope presser roller * Deflection pulley for winch with shackle and bolted lashing point

Stanje: novo, skupna masa: 80.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Further vehicles available – excerpt from the equipment list. Full equipment details on request. GOOSENECK: * Gooseneck in SNT design for optimized loading bed length, length approx. 3,700 mm, rear with chamfer approx. 1,000 mm x 10° * For tractor units: 4x2, 6x2, and 6x4 * Front steel bulkhead, plug-in, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for controlling hydraulic functions (excluding hydraulic winches) * Outer beams of the gooseneck with mounting holes for bolted lashing rings. First hole approx. 200 mm from the front, then approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) Ncsdpjxarmaefx Agxer * 1 pair horizontal lashing rings at the rear section of the gooseneck (LC 10,000 daN) * On the gooseneck: 1 pair removable ALU side boards approx. 400 mm high, anodized finish * On the gooseneck: 1 removable ALU rear board approx. 400 mm high, anodized finish * Over the gooseneck: approx. 40 mm hardwood flooring, over the king pin checker plate covering * 3.5-inch king pin * Gooseneck guide plate for the fifth-wheel plate, approx. 500 mm wide * Round NATO socket at the front connection bar (Maeler & Kaege VG 96 917) * 2 pairs of suspended lashing rings with retaining spring on the outer beams of the gooseneck (LC 5,000 daN) LOADING BED: * Loading bed, extendable version, length approx. 8,800 mm with chamfer at the rear approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced locking positions, supply lines are protected within the extendable beams and automatically adapt to the respective bed length * BPW axles and suspension, first axle hydraulically steered, all other axles hydro-mechanically forced steered * First axle with electro-magnetic reverse lock, activated by reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * 235/75 R 17.5 3PMSF twin tyres – manufacturer at our discretion * Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B – static test load = 50,000 kg * Continuous hardwood flooring (approx. 50 mm thick) on the bed and between axles (interrupted), increasing friction coefficient. – Slots for attachable and adjustable bridging elements * At the front of the bed – 1 movable intermediate table approx. 300 mm wide for the large-section telescopic tube, with checker plate covering. – Front and rear slots for attachable and adjustable bridging elements * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 7 pairs of recessed folding lashing rings on the outer frame of the bed (LC 10,000 daN) * Extensions (galvanized), extendable by approx. 230 mm per side (without wooden planks) * 1 pair mechanical rear supports * Remote-controlled steering from front and rear via cable remote control, with single-track control of axles, without installation in the tractor unit * TPMS tire pressure monitoring sensors installed in all wheels * Locking of the bed with conically welded retaining profiles every 500 mm * Locking control left and right on the trailer * For the intermediate table approx. 300 mm wide, a mechanical lock for securing the table in the extension * 5 pairs of threaded blocks on the extendable beam for mounting M20 screw rings (LC 5,000 daN) BRAKING SYSTEM

Stanje: novo, največja dovoljena obremenitev: 51.780 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our entire range of vehicles, including those available immediately or at short notice, can be found on our website. Excerpt from the specification. Full specification available on request. GOOSENECK: * Gooseneck in SNT design for optimization of loading platform length, approx. 3,700 mm long, rear with bevel approx. 1,000 mm x 10° * Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 * Plug-in steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front control panel with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for controlling hydraulic functions, excluding hydraulic winches Ncsdsyhkrlopfx Agxjr * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * One mounting hole in the rear upper section of the gooseneck outer beams for a bolt-on lashing ring * 1 pair of screw-in lashing rings included (LC 10,000 daN) * On the gooseneck: 1 pair of plug-in side aluminium drop sides, approx. 400 mm high, anodized finish * On the gooseneck: plug-in aluminium tailboard, approx. 400 mm high, anodized finish * Approx. 40 mm hardwood floor covering on the gooseneck * 2-inch king pin * One crosswise stake pocket rail fitted in the deck of the gooseneck before the bevel, for plug-in stakes, approx. 100 x 50 mm LOADING PLATFORM: * Extendable loading platform, approx. 8,800 mm long, with rear bevel approx. 500 mm x 10° * Recess in loading platform and bevel to accommodate excavator stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, 1st and 2nd axle rigid, 3rd and 4th axle steering * 3rd and 4th axles with electro-magnetic reversing lock, activated by reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * Mechanical landing gear with 2-speed gearbox and crank * Continuous hardwood floor covering on loading platform and between axles (approx. 50 mm thick), increases friction coefficient * 1 intermediate table with a recessed loading area, approx. 300 mm wide, for the large cross-section sliding tube with sheet metal covering * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 6 pairs of recessed, fold-out lashing rings in the loading platform's outer frame (LC 10,000 daN) * Additionally, 1 pair of lashing rings on the outside of the front cross member, turned approx. 90° inward towards the loading area (LC 10,000 daN) * Extendable galvanized widenings, approx. 230 mm per side (without wooden planks) * 1 pair of fixed wheel recesses open to the extension, approx. 700 x 410 mm (W x D) in the loading platform in front of the 1st axle * Between 2nd and 3rd axle: 1 pair fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D) * 1 pair mechanical rear supports * 245/70 R 17.5 3PMSF twin tires – brand of our choice HYDRAULIC LOADING RAMPS: * DR-15/60-900-4350-HB-HV-M * One pair of two-part steel ramps, approx. 4,350 mm long and 900 mm wide * Hardwood flooring, hydraulically foldable ramp tips * Ramps hydraulically movable by approx. 235 mm outwards and approx. 215 mm inwards, individually * Hardwood flooring on the loading platform’s bevel * Ramp with hardwood flooring BRAKING SYSTEM: * WABCO EBS-E braking system compliant with EU regulations SURFACE TREATMENT: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% a

Stanje: novo, največja dovoljena obremenitev: 36.400 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete range of immediately and short-term available vehicles can be found on our website. Excerpt from the equipment. Full specification available upon request. - Gooseneck in SNT design to optimize the platform length, approx. 3,700 mm long, rear with a chamfer of approx. 1,000 mm x 6° - For tractor units: 4 x 2 and 6 x 2 - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S, & 15-pin sockets - 3 kW electro-hydraulic power pack to control hydraulic functions, except for hydraulic winches. Without installation of supply connections on the tractor unit - Outer beams of the gooseneck with mounting holes for bolted lashing rings. First hole approx. 200 mm from the front, then every approx. 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) - One mounting hole at the rear upper section of the outer beams of the gooseneck for a bolted lashing ring - 1 pair of screw-in lashing rings included (LC 10,000 daN) - 3 pairs of recessed lashing rings inside the outer beam of the gooseneck (LC 5,000 daN) Nsdpfx Ajyhkqusgxocr - 3 pairs of recessed lashing rings in the center of the gooseneck (LC 5,000 daN) - 1 pair of recessed lashing rings at the rear center of the gooseneck (LC 5,000 daN) - The gooseneck and rear chamfer feature grating flooring with 5 mm steel reinforcement - 2-inch king pin - Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) - Spiral cable to supply the electro-hydraulic power pack and/or the electric winch (approx. 35 mm², approx. 3.5 m long) between trailer and tractor unit with plug (NATO-NATO) - On the gooseneck: 1 pair of detachable aluminum side walls, approx. 400 mm high, anodized finish LOAD PLATFORM: - Load area, approx. 9,600 mm long, with rear chamfer approx. 900 mm x 6° - Loading platform behind the gooseneck hydraulically liftable and lowerable, approx. 3,000 mm long, loadable up to approx. 9,000 kg - TPMS tire pressure monitoring system according to ECE R 141 - BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steered. 3rd axle with electro-magnetic reverse lock activated via reverse gear and manually - Technical axle load: 12,000 kg each - Air suspension with lift and lower valve - 235/75 R 17.5 3PMSF twin tires. Brand at our discretion, load index 143/141J (144/144F) - Mechanical landing legs with 2-speed gearbox and crank - Continuous grating flooring with approx. 5 mm steel underlay as additional reinforcement, designed for point loads: - on the lift bed - on the load platform - Painted sand coating on the cover plates of the gooseneck as well as transition areas between gooseneck and lift bed, lift bed and load platform, and between load platform and ramps - 1 spare wheel mounting bracket under the load platform, right side before the axles - Cutouts in the outer frame of the platform and lift bed for hooking in tension belts (LC 2,000 daN) - 11 pairs of recessed lashing rings in the outer frame of the platform, foldable outward (LC 10,000 daN): - 3 pairs in the outer frame of the lift bed - 8 pairs in the outer frame of the platform - 11 pairs of recessed lashing rings along the central girder (LC 5,000 daN): - 3 pairs in the lift bed - 8 pairs in the rear part of the platform - Control valves for the hydraulic ramps on the right side of the vehicle - 1 pair of foldable mechanical rear supports with one-hand operation HYDRAULIC LOADING RAMPS: - 1 pair of two-part AXS steel ramps, approx. 4,920 mm long, and a...

Stanje: novo, največja dovoljena obremenitev: 67.200 kg, skupna masa: 85.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment features. Full equipment details upon request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm long, with a rear chamfer approx. 1,000 mm x 10° * For tractor units: 6x2, 6x4, and short 8x4 Ncsdpfergzv Nox Agxjr * Plug-in steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish * One plug-in ALU rearboard, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood flooring above the gooseneck, checker plate flooring above the king pin * 3.5 inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. bracket for suspension of supply lines (Faymonville couplings) * 2 pairs of stake pockets sunk into the gooseneck, for plug-in stakes approx. 100 x 50 mm LOADING DECK * Extendable loading deck, length approx. 11,000 mm, rear chamfer approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced lock positions, supply lines are routed protected in the extendable beams and automatically adjust to the respective platform length * BPW axles and suspension, 1st axle steerable, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Tyres: 235/75 R 17.5 3PMSF, twin tyres * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous 50 mm thick hardwood flooring on the loading deck, interrupted between the axles (increases coefficient of friction) * Slotted holes for attachable and re-positionable bridging elements: - on the fixed section behind the gooseneck - at the front of the loading area * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate flooring, slotted holes front and rear for attachable and repositionable bridging elements * 1 pair of recessed horizontal lashing rings at the front of the fixed platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the deck, fold-out to the outside (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering operated from both front and rear via cable remote control, with axle tracking control, no installation in the tractor unit * 1st axle with automatic lift-axle function and start-up aid according to EU Directive 2021/535 * Under the gooseneck and on the rear cross member, one 7-pin socket each on left and right, with bracket for warning signs * Painted sand coating on the outer frame of the platform as well as on the checker plates of the platform and in the transition area between the loading deck

Stanje: novo, največja dovoljena obremenitev: 50.400 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment specification. Full specification available on request. GOOSENECK * Gooseneck in SNT design to optimize platform length, approx. length 3,700 mm, with rear bevel of approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection rail with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches * 1 pair of detachable ALU side walls, approx. 400 mm high, anodized finish * 1 detachable ALU rear wall, approx. 400 mm high, anodized finish * Over the gooseneck, approx. 40 mm thick hardwood flooring, over the king pin with checker plate covering * 2-inch king pin * Mount at the rear of the gooseneck for ALU drive-on ramps * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) LOAD PLATFORM * Extendable load platform, approx. length 8,800 mm, with rear bevel approx. 500 mm x 10° * Recess in platform and rear bevel for accommodating an excavator dipper stick, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st axle self-steering, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reversing lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * Tires: 235/75 R 17.5 3PMSF twin tires * Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B - static test load = approx. 50,000 kg * Platform with continuous and between-axles interrupted 50 mm thick hardwood flooring (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable galvanized side extensions by approx. 230 mm each side (without wooden planks) * Wheel wells with square climbing strips, approx. 15 x 15 mm in front of the axles, continuous opening up to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * Widenable U-profiles for inserting ALU covers: - on the fixed section behind the gooseneck - on the intermediate table - on the extendable platform * Wheel wells with square climbing strips, approx. 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks Njdpfx Agotx Nwnsxocr * Lockable aluminium elements on the extension tubes of the side extensions * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with single-track monitoring of the axles, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-part steel ramps, type: DR-15/60-900-4350-KG-HV-M, approx. length 4,350 mm and width approx. 900 mm * Hydraulically folding ramp tips * Ramps hydraulically adjustable individually by approx. 235 mm outward and approx. 215 mm inward * Super Grip rubber surface approx. 25 mm and steel surface approx. 5 mm as additional

Stanje: rabljeno, največja dovoljena obremenitev: 51.870 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2025, naslednji pregled (TÜV): 03/2026, skupna širina: 2.540 mm, Oprema: ABS, Our complete stock of vehicles, including those available immediately and at short notice, can be found on our website. Extract from the equipment. Full equipment details available upon request. Nedoxtc Uhopfx Agxjcr GOOSENECK - Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, rear with 1,000 mm x 10° bevel - Suitable for tractor units: 4x2, 6x2, and 6x4 - Removable steel front wall, approx. 400 mm high - Yellow-red air couplings on the front connector strip - ASPÖCK UNIBOX on the front connector strip with 24N, 24S, & 15-pin sockets - 3 kW electro-hydraulic unit for hydraulic control - Outer beams of the gooseneck with mounting holes for bolt-on lashing rings - One mounting hole at the upper rear of the gooseneck outer beams for a bolt-on lashing ring - 1 pair of screw-in lashing rings included (LC 10,000 daN) - On the gooseneck, 1 pair of plug-in aluminum sideboards, approx. 400 mm high, anodized finish - On the gooseneck, one plug-in aluminum rear board, approx. 400 mm high, anodized finish - Approx. 40 mm thick hardwood flooring above the gooseneck - 2-inch kingpin - Gooseneck guide plate for fifth wheel, approx. 500 mm wide - Rear mount on gooseneck for aluminum drive-on ramps - Round NATO socket at the front connector strip (Maeler & Kaege VG 96 917) LOADING PLATFORM - Extendable loading platform, approx. 8,800 mm long, rear with 500 mm x 10° bevel - Recess in the loading platform and the bevel to accommodate excavator dipper arm, approx. 2,490 x 750 x 210/290 mm (L x W x H) - TPMS tire pressure monitoring system according to ECE R 141 - BPW axles and suspension - 1st and 2nd axles fixed, 3rd and 4th axles steering trailing axles - 3rd and 4th axles with electro-magnetic reverse lock, activating via reverse gear and manually - Technical axle load: 12,000 kg each - Air suspension with raising/lowering valve - 235/75 R 17.5 3PMSF twin tires - Mechanical landing legs with 2-speed gearbox and crank, JOST Module B – static test load: approx. 50,000 kg - Continuous and inter-axle interrupted approx. 50 mm thick hardwood flooring on the loading platform (increased friction coefficient) - Loading platform locking using conically welded locking profiles every approx. 250 mm - Slotted holes for attachable and repositionable bridging elements at the front of the platform - Intermediate platform with offset surface, approx. 300 mm wide, for the large cross-section sliding tube with sheet covering – front and rear with slotted holes for attachable and repositionable bridging elements – removable panel flush with the loading platform - 1 pair of lashing rings on the front cross member (LC 10,000 daN) - 6 pairs of recessed lashing rings in the outer frame, foldable outwards (LC 10,000 daN) - Additionally, 1 pair of external lashing rings on the front cross member, rotated approx. 90° inwards to the platform (LC 10,000 daN) - Extendable (galvanized) extensions, approx. 230 mm per side - 1 pair of fixed wheel recesses open up to the extension, approx. 700 x 410 mm (W x D), in the platform before the 1st axle, wheel recesses with sheet covering and square climbing strips of approx. 15 x 15 mm, each approx. 200 mm - Between 2nd and 3rd axles in the platform, 1 pair of fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D); covers for wheel recesses split lengthwise, with wood overlay, external plug-in mounting

Stanje: zelo dobro (rabljeno), konfiguracija osi: 2 osi, prva registracija: 09/2020, barva: rdeča, Leto izdelave: 2020, Oprema: ABS, Rear axle 1: Dual tires Rear axle 2: Dual tires; Steering axle Unladen weight: 8,060 kg Loading platform height: 86 cm Extendable body: Yes Technical condition: Very good Visual condition: Very good Price: On request FAYMONVILLE F-S42-111A SEMI LOWBED TRAILER 2x SAF axles 1x steering axle (trailing) Tire size Extendable loading platform Length 680 cm + 420 cm extendable, total platform length 1,100 cm Platform width 254 cm Nsdpfxox Upxxj Agxjcr Platform height approx. 86 cm Gooseneck length 330 cm Lashing eyes, stake pockets, twistlocks Follow us on Instagram: GEURTSTRUCKS Lowbed trailer built in 2016, but sold as new in 2020 We speak German Hablamos Español We speak English

Stanje: novo, lastna masa: 10.500 kg, največja dovoljena obremenitev: 29.500 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, 2 para odstavkov za kolesa s pokrovom, ABS, zračno vzmetenje s funkcijo dviga in spuščanja, tehtnice za osne obremenitve, skupna dolžina nakladalne površine pribl.: 10.250 mm, nizka postelja pribl.: 7.150 mm dolžine, višina nakladanja z obremenitvijo pribl. 890 mm, 24 pritrdilnih ušes po 10 t, 40 pritrdilnih ušes po 3 t, naletne rampe (pribl. 3.100 x 760 mm), protidrsni trak na zunanji strani ramp in zadnjem naklonu, stransko nastavljive rampe, lesena tla debeline 68 mm, shranjevalna škatla s pokrovom za verige ali napenjalne trakove, označevanje obrisa po predpisih, rotacijska luč, parkirna zavora s prenosom vzmeti, vključuje prikazovalnike osnih obremenitev, vozilo vroče pocinkano s potopno metodo, dodatno: hidravlično premikanje ramp = cena: 1.000 €; -- pridržujemo si pravico do tiskarskih napak, sprememb in napak, slikovni material je informativne narave --, Več podatkov na: !, Dodatne podrobnosti: ! Nsdpfx Agoy Hckfsxecr

Stanje: novo, lastna masa: 10.500 kg, največja dovoljena obremenitev: 29.500 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, 2 para kolesnih vdolbin z pokrovom, ABS, zračno vzmetenje z dvižnim in spustnim mehanizmom, tehtnice za osno obremenitev, skupna dolžina nakladalne površine cca: 9.100 mm, spuščeni del (tiefbett) cca 6.900 mm dolg, višina nakladanja pri obremenitvi cca 890 mm, 24 x pritrdilna ušesa po 10 t, 40 x pritrdilna ušesa po 3 t, nakladalne rampe (cca 3.100 x 760 mm), nedrseči trak na zunanji strani ramp in zadnjem naklonu, rampe lateralno nastavljive, lesena tla debeline 68 mm, škatla s pokrovom za verige za pritrditev ali napenjalne trakove, označevanje obrisa po predpisih, opozorilna rotacijska luč, vzmetna (Federspeicher) parkirna zavora, vključuje prikazovalnike obremenitve osi, podvozje popolnoma vroče pocinkano, , doplačilo za: hidravlično premikanje ramp = cena: 1.000 €, , --  Pridržane pravice do tiskarskih napak, sprememb in pomot, slike so vzorčne --, Več podatkov na: !, Več podrobnosti: ! Ncsdpfx Agsy E H Swjxsr

Stanje: novo, največja dovoljena obremenitev: 40.320 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Selection of equipment. Complete specification available on request. Gooseneck: * Gooseneck with rear bevel approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick. Loading area with 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate covering above the axles Landing Gear: JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * 205/65 R17.5 tyres – manufacturer of our choice TPMS: * TPMS tyre pressure monitoring system in accordance with ECE R 141 Axles: * BPW axles, two rigid and two self-steering axles * Air suspension with lift/lower function * Drum brakes * Self-steering axles with electromagnetic reversing lock, activated via reverse gear or manually Brake system: * WABCO brake system compliant with EU regulations and EBS-E (4S3M) Electrical system: * Electrical system according to EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with indicator * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: * Steel structure made of high-strength fine grain steel * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) for optimal corrosion protection * Trailer colour RAL 3002 Carmine Red * Rims Silver Grey * Tarp RAL 9006 (brilliant direct) Options included: * At the gooseneck and at the rear, left and right, one bracket each for warning signs, including socket * 2-inch king pin * One galvanized steel front wall * Yellow-red air couplings at the galvanized front connection strip * 4 wheel chocks with holder on the front wall * 3 tiers of wooden boards * Galvanized folding supports under the loading area bevel * One bracket for a revolving warning light at the rear end of the trailer * Height-adjustable curtain structure – approx. 3,960 mm? * Galvanized front wall with tensioning mechanism for sliding curtains. Height adjustable by approx. 400 mm Nedpey Aug Defx Agxecr * Roof brand EDSCHA, can be slid forward on ALU roof profile beams (bolted to front and rear wall) * 3 pairs of movable stanchions in the loading area * Body hydraulically extendable to the left and right at the rear by approx. 750 mm * Sliding roof with fold-up portal beam * Sliding tarp with 700 mm reserve in length; tie-down straps at approx. 600 mm intervals. Height upper edge of body approx. 3,960 mm (loaded) * Driving with the sliding roof open is not permitted and will damage the tarp * Body at the rear closed with anodized ALU swing doors * Latch-on rail for ALU loading ramps at the rear of the vehicle * Control valves for hydraulic widening fitted to the right-hand side of the trailer * White reflective tape as per EU regulations on the sides, red at the rear * Electro-hydraulic unit under the rear loading area * One mudguard at the rear of the trailer * European reflective signs (red-yellow) at the rear of the trailer * Hand…

Stanje: novo, največja dovoljena obremenitev: 36.590 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including units available immediately and at short notice, on our website. Excerpt from equipment specifications. Complete equipment list available on request. Neck: * Gooseneck with front corners chamfered approx. 45° and rear bevel approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Area: * Extendable loading area with rear bevel approx. 1,000 mm x 8° * 5 pairs of fold-out external lashing rings (LC 5,000 daN) * 3 pairs of fold-out external lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * Cut-outs in the external frame of the loading area for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate over the axles Tyres: * Tyres 245/70 R 17.5 3PMSF – brand at our discretion. Load index (146/146F) TPMS: * TPMS tyre pressure monitoring system compliant with ECE R 141. Data transfer to the tractor unit via the standardised EBS interface according to ISO 11992. For correct display, the tractor unit must support receiving and displaying this data. Landing Legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Ncsdpey Auifofx Agxsr Axles: * BPW axles and suspension, all axles hydromechanically forced-steered * Technical axle load: 12,000 kg per axle * Air suspension with lifting / lowering valve * Axle tool Brake System: * WABCO brake system according to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Steel Construction: * Steel structure made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical System: * Electrical system according to EU regulations, 24V lighting ASPÖCK-NORDIK (ASS3), ASPÖCK-UNIBOX at the front connection rail with sockets 24N, 24S & 15 pin. Connection according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel structure is automatically shot-blasted with a centrifugal blasting machine after welding * Second sandblasting with corundum for optimal adhesion of the coating system * Final paint with 2 coats of 2K topcoat, single colour in RAL 3002 carmine red, according to RAL system 841GL * Rims in silver grey * Rear section metallised and painted in RAL 9010 (pure white) Accessories: * 2-inch king pin * One galvanised steel front wall approx. 400 mm high * Yellow-red air couplings on the galvanised front connection rail * Spare wheel holder in front of the front wall (without spare wheel) * Electro-hydraulic power pack * Remote steering front and rear via cable remote control using push buttons, with single-track monitoring of the axles (without installation in the tractor unit) * Mounting rail for aluminium ramps at the gooseneck with integrated collision protection * Gooseneck and rear plate each fitted left and right with a bracket for warning boards incl. socket * Bracket for a rotating beacon at the rear of the trailer * Galvanised folding supports beneath the loading area’s rear bevel * 1 pair of recessed lashing rings along the central beam at the rear in the bevel (LC 10,000 daN) * Load gauge for determining axle loads including load diagram * Sanded coating applied to the checker plates on the gooseneck and loading area for slip resistance * Gooseneck fitted with plug-in aluminium side and rear panels, approx. 2,440 x 400

Stanje: novo, največja dovoljena obremenitev: 58.860 kg, skupna masa: 73.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately and at short notice, on our website. Excerpt from the equipment list. Full specification available on request. Gooseneck: * Gooseneck with approx. 45° chamfered front corners and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring, approx. 30 mm thick Extendable loading platform: Nedpoy Augwsfx Agxecr * Extendable loading platform with rear chamfer approx. 500 mm x 8° * 8 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for attaching tensioning straps (LC 2,000 daN) * Hardwood flooring, approx. 48 mm thick; checker plate flooring over the axles Two-piece steel ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 900 mm, with Super Grip rubber coating * Ramp with hydraulically folding and unfolding ramp sections * Hydraulic lifting mechanism, hydraulically adjustable * Maximum load per pair: 50,000 kg * In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not need to be included in the overall vehicle length of 16,500 mm when in driving position Axles: * BPW axles and suspension, 1st axle with steering, 2nd and 3rd rigid, 4th and 5th axles trailing-steered, air suspension, with raise/lower function, drum brakes * Trailing steering axles with electromagnetic reverse lock, activated via reverse gear or manually * Technical axle load: 12,000 kg each Tyres: * Tyres 235/75 R 17.5 3PMSF – make of our choice TPMS: * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the truck via standardized EBS interface according to ISO 11992. For correct display, the truck must be capable of receiving and displaying this data Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Brake system: * Wabco brake system in compliance with EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit Steel structure: * Steel structure made from high-tensile fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system in accordance with EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel structure automatically shot blasted after welding with a blast wheel system * Second blasting treatment with corundum for optimum adhesion of the coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final paint finish with two coats of 2K topcoat, single color in RAL 3002 carmine red according to RAL system 841GL * Rear section metallized and painted in RAL 9010 (pure white) Including the following additional equipment: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * A spare wheel carrier in front of the front wall * Yellow-red air couplings at the galvanized front connection strip * A bracket for a rotating beacon at the rear of the trailer * Galvanized supports under the chamfered section of the loading platform * Super Grip 2 rubber coati

Stanje: novo, največja dovoljena obremenitev: 36.020 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles available for immediate or short-term delivery on our website. Partial equipment listing. Full equipment details available upon request. Gooseneck: * Gooseneck with rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Loading area with rear bevel approx. 1,000 mm x 8° * 5 pairs of outward folding lashing rings (LC 5,000 daN) Ncodpey Auhusfx Agxsr * 3 pairs of outward folding lashing rings (LC 10,000 daN) * 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) * Hardwood flooring approx. 48 mm thick, with checker plate covering over the axles Two-part steel ramps: * One pair of galvanized two-piece steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating surface C40/5 (point load approx. 2.8 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding ramp sections and hydraulic lifting mechanism * Maximum load per pair: 30,000 kg Landing legs: * JOST landing gears (manual) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, can be activated via reverse gear and manually * Air suspension with raise and lower valve Tyres: * 235/75 R 17.5 3PMSF tyres – manufacturer at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Brake system: * WABCO brake system compliant with EU regulations with EBS-E (2S2M) without connectors to the tractor unit Steel structure: * Steel construction made from high-tensile fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system in accordance with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * HRM metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimal corrosion protection * Final coating with 2 layers of two-component topcoat, single colour in RAL 3002 carmine red, in accordance with RAL System 841GL * Rear section metalized and painted RAL 9010 (Pure White) * Wheels in silver Including accessories: * One bracket for warning signs on both sides at the gooseneck and at the rear, including socket * 1 spare wheel holder under the loading area on the right-hand side * 2" kingpin * Galvanized steel front wall * Yellow-red air couplings on the galvanized connector strip at the front * 4 wheel chocks with holders on the front wall * 3 height-adjustable wooden planks * Galvanized folding supports under the loading area bevel * Bracket for a rotating beacon at the rear of the trailer * Height-adjustable tarpaulin frame (approx. 3,960 mm) * Galvanized front wall with tensioning mechanism for sliding curtains, height-adjustable by approx. 400 mm * EDSCHA roof, forward-sliding, on aluminium roof beam profiles (bolted with front and rear wall) * 3 pairs of sliding stakes in the loading area * Superstructure can be hydraulically widened at the rear to left and right by approx. 750 mm * Sliding roof with liftable portal carrier * Sliding tarpaulin with approx. 700 mm slack in length, with tensioning straps spaced approx. 600 mm

Stanje: novo, največja dovoljena obremenitev: 37.980 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: * Gooseneck with approx. 45° beveled front corners and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick Loading platform (extendable version): * Extendable loading platform with rear chamfer approx. 1,000 mm x 8° * 6 pairs of folding-out lashing rings (LC 5,000 daN) * 3 pairs of folding-out lashing rings (LC 10,000 daN) * 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) * Hardwood flooring, approx. 48 mm thick, with checker plate over the axles Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t static load) Tyres: * 235/75 R 17.5 3PMSF tyres – manufacturer at our discretion TPMS: * TPMS tyre pressure monitoring system in accordance with ECE R 141. Data transmission to the tractor unit is via the standardised EBS interface per ISO 11992. For correct display, the tractor unit must be able to transmit and display these data. Axles: * BPW axles and suspension, 2 rigid axles, 1 steering trailing axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock activated by reverse gear and manually * Air suspension with lift/lower valve * Axle tools Brake system: * Brake system compliant with EU regulations with EBS-E (2S2M), no connecting lines to the tractor unit Steel construction: * Steel construction made from high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * Complete steel structure automatically shot-blasted after welding with blast wheel machine * Secondary blasting with corundum for optimal coating adhesion * Final painting with 2 layers of 2K topcoat, single colour RAL 3002 Carmine Red as per RAL System 841GL * Rims in silver-grey * Rear section metallized and painted in RAL 9010 (pure white) * Paint system tested in salt spray test per ISO 9227-NSS * Cavity sealing with special wax Electrical system: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights synchronized with the indicator * ASPÖCK-UNIBOX at the front connector rail with sockets: 24N, 24S, & 15-pin according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Accessories included: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * One spare wheel carrier in front of the front wall * Yellow-red air couplings on the galvanized front connection rail * 4 chock blocks with holder at the front wall * Mount at the rear of the gooseneck for ALU approach ramps Nodpfoy Aufmjx Agxjcr * Galvanized folding supports under the loading platform rear chamfer * At the gooseneck and on the rear panel, left and right, each with a bracket for warning signs including socket * Load gauge for determining axle loads with load diagram * On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized plug-in stanchions are removable. (Superstructure length approx. 2,560 mm) * One galvanized toolbox integrated in the beveled gooseneck * 3 pairs WADER C

Stanje: novo, največja dovoljena obremenitev: 47.300 kg, skupna masa: 58.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Excerpt from the equipment list. Complete equipment details available upon request. Gooseneck: * Gooseneck with chamfered front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Loading area in extendable design with rear chamfer approx. 1,000 mm x 8° * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) * Recesses in the outer frame of the loading area for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate flooring above the axles Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Tyres: * Tyres 235/75 R 17.5 3PMSF, manufacturer of our choice Axles: * BPW axles, two rigid axles, two self-tracking axles, air suspension, drum brake, with lifting/lowering function * The self-tracking axles can be locked for reversing by electro-magnetic reverse lock via reverse gear or manually Ncjdpfx Ajyvnfgogxjr * Axle tools Brake system: * WABCO brake system in compliance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system in accordance with EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Premium and durable corrosion protection for the standard shot-blasted welded frame ensured by a two-component (2K) zinc dust primer * High-quality two-component (2K) topcoat, single colour, RAL 3002 Carmine Red * Rear section metallised and painted in RAL 9010 (Pure White) * Rims in silver Accessories: * Spare wheel holder in front of the front wall (without spare wheel) * 2-inch king pin * Galvanised steel front wall approx. 400 mm high * Yellow-red air couplings on the galvanised connection strip at the front * Mount in the rear area of the gooseneck for ALU loading ramps * Galvanised folding supports under the rear chamfer of the loading area * Holder for a beacon at the rear of the trailer * On the gooseneck and at the rear end panel, left and right, holders for warning signs including socket * TPMS tyre pressure monitoring system according to ECE R 141 * On the gooseneck, plug-in aluminium side walls and tailgate, approx. 2,440 x 400 mm (L x H). The rear galvanised plug-in stanchions are removable. (Body length approx. 2,560 mm) * Galvanised toolbox integrated into the chamfered gooseneck * 3 pairs of WADER container pockets recesses in the loading area for a 20' (30') or 40' container * Sliding hooks for aluminium loading ramps at the rear of the vehicle * 6 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading area * Galvanised extensions, extendable by approx. 230 mm per side * Lift axle on the front axle with control via TEBS E depending on the current axle load and current loading status * 2 LED reversing lights mounted on the rear end panel * 2 pairs Ferry-

Stanje: novo, največja dovoljena obremenitev: 45.820 kg, skupna masa: 58.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Excerpt of features. Full equipment details available on request. Gooseneck: * Gooseneck with front chamfered corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Extendable loading platform: * Loading platform in extendable design with rear chamfer approx. 1,000 mm x 8° * 5 pairs of externally foldable lashing rings (LC 5,000 daN) * 3 pairs of externally foldable lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * Cut-outs in the outer frame of the platform for fastening straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, with chequer plate above the axles Axles: * BPW axles and suspension * 1st axle fixed, all other axles hydro-mechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve * Axle tools Tyres: * Tyre size 245/70 R 17.5 3PMSF, load index (146/146 F) * Brand at our discretion * TPMS tyre pressure monitoring system as per ECE R 141 * Data transmission to truck tractor via standardized EBS interface according to ISO 11992 * For correct display, the tractor must support the transmission and display of this data Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t test load) Ncsdpfxsxbmpfo Agxjr Braking system: * Wabco brake system compliant with EU regulations, with EBS-E (4S3M) without connections to the tractor unit Paintwork: * Complete steel structure, automatically shot-blasted after welding using a turbine system * Second blasting with corundum for optimal adhesion of the coating system * Final coating with 2 coats of 2K topcoat, solid colour in RAL 3002 Carmine Red as per RAL System 841GL * Wheels in silver grey * Rear section metallized and painted RAL 9010 (Pure White) * No metallic paint available * Paint structure tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Steel structure: * Steel structure made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system according to EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with indicator * ASPÖCK-UNIBOX at the front connector rail with sockets 24N, 24S & 15 pin. Connections in accordance with ISO: * 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Including the following additional equipment: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings at the galvanized front connector rail * Electro-hydraulic power pack * Remote steering of axles from the front and rear via cable remote control with push buttons, single-track alignment control (no installation in the tractor unit) * Galvanized folding supports under the rear slope of the loading platform * 1 pair of recessed lashing rings along the central beam at the rear in the sloped section (LC 10,000 daN) * On the gooseneck, plug-in aluminium side and rear panels, approx. 2,440 x 400 mm (L x H) * Rear removable galvanized stanchions (body length approx. 2,560 mm) * One galvanized toolbox, integrated in the sloped gooseneck section * 3 pairs of WADER container pockets in loading area for a 20' (30?) or

Stanje: novo, največja dovoljena obremenitev: 39.670 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment features. Complete specifications available upon request. Gooseneck: * Gooseneck with approx. 30 mm thick hardwood flooring * Gooseneck rear in straight version * 3 pairs of lashing rings (LC 5,000 daN) Load area: * Extendable load area * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of flat-mounted lashing rings at the front of the load area (LC 10,000 daN) * Cutouts in the outer frame of the load area for attaching tensioning straps (LC 2,000 daN) * Approx. 48 mm thick hardwood flooring, chequer plate covering above the axles Landing legs: JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, two fixed axles, two trailing steerable axles * Air suspension with raise/lower function * Steering axles with electro-magnetic reversing lock, activated via reverse gear or manually * Drum brakes * Axle tools Tyres: * 205/65 R 17.5 * Manufacturer of our choice * TPMS tyre pressure monitoring system per ECE R 141 * Data transmission to the tractor unit via standardized EBS interface according to ISO 11992 * The tractor unit must be able to transmit and display this data correctly Brake system: * Brake system according to EU regulations with EBS-E (4S3M), without connectors to the tractor Steel structure: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork: * Entire steel construction automatically shot-blasted after welding using a turbine blasting machine * Second blasting treatment with corundum for optimal adhesion of the coating system * HRM metalizing of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection * Topcoat with 2 coats of 2K paint, single-colour in RAL 3002 carmine red as per RAL System 841GL * Rims in silver * Rear section metalized and painted in RAL 9010 (pure white) * Metallic paint not available * Paint structure tested in salt spray test according to ISO 9227-NSS * Sealing of cavities with special wax Electrical system: * Electrical system in line with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with indicators * ASPÖCK-UNIBOX at the front terminal strip with sockets 24N, 24S & 15-pin connection according to ISO (24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098) Included accessories: Nsdpfx Aoxarlvogxscr * 2" kingpin * One spare wheel holder in front of the bulkhead * Yellow-red air couplings on the galvanized front connection terminal * Galvanized folding supports under the load area's slope * One galvanized steel bulkhead (EN12642-XL), approx. 1,600 mm high * On the gooseneck, removable ALU side and rear walls, approx. 2,440 x 400 mm (L x H) * The rear galvanized stake pockets are removable (body length approx. 2,560 mm) * Support block with 1 pair WADER container pockets. Saddle load approx. 20,000 kg * 7 pairs WADER container pockets for 1x 20' container in the load area * 1x 40' container in the load area, 1x 40' container over the gooseneck, 2x 20' containers * 7 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the load area * One galvanized transverse bracket under