Podstavni Obračalnik 520 Mm Širine Traku nakup rabljenega (83.590)

Stanje: zelo dobro (rabljeno), Clamping angle Dcodjhk I Hgjpfx Adiok Height: 2550 mm Width: 1190 mm Depth: 1100 mm Material thickness: 80 mm Weight: 4.1 t

Stanje: zelo dobro (rabljeno), Steady rest (28371) Centre height: 200 mm Diameter: 65 mm Dedslrp Nqepfx Adisck Weight: 9 kg For further details, see image

Stanje: rabljeno, Obseg dobave vključuje: 01x Prečka za paletni regal, rabljena Barva materiala: rumena Tip prečke: 7BB Okvirni profil: 120 x 50 mm Izvedba: čelna prečka Zaponka: 3 kavlji Svetla širina: 2.700 mm maks. nosilnost na par prečk 3.000 kg, pri enakomerno porazdeljeni obremenitvi 02x Varovalni zatiči, rabljeni Izvedba: popolnoma pocinkani Za varovanje vzdolžnih nosilcev proti nenamerni odstranitvi Vaši kontakti v našem podjetju: G.: Andre Evering G.: Mario Klöver G.: Falk Deutsch Splošne informacije o izdelku: Ta izdelek je na voljo samo za osebni prevzem. Dodatni transport oziroma pošiljanje tega izdelka je povezano z dodatnimi stroški, ki jih je mogoče pri nas preveriti glede na lokacijo dostave oziroma obseg dobave. Dodpfjy Nxf Djx Adieck

Stanje: rabljeno, prevoženi kilometri: 350 km, moč: 129 kW (175,39 KM), barva: bela, vrsta prenosa: samodejen, dolžina tovornega prostora: 35.000 mm, širina tovornega prostora: 18.000 mm, višina nakladalnega prostora: 19.000 mm, Leto izdelave: 2026, Oprema: ABS, centralno zaklepanje, klimatska naprava, servovolan, - Mr. Rudolph is happy to assist you by phone at: ! 12 units available ! Sliding door on passenger side, seat belts with warning signal for driver and passenger, standard seat belt color, passenger bench seat with 3-point belt on center seat, standard headrests, belt tensioner passenger side, fabric seat covers, front halogen headlights, light and rain sensor, high beam control manual, trailer coupling preparation 12V 13-pin, bodybuilder interface, tinted windows, rear parking sensors, fuel filler neck in B-pillar, standard vehicle label, tire pressure monitoring system (TPMS), side vehicle lettering, proactive steering assistant with lane departure warning (ELK), standard paint, emergency braking assistant AEBS with City Brake, MY 2024, electrically adjustable and heated exterior mirrors, cab width 2000 mm, overhead storage above cab, driver drowsiness warning system (DriverDrowsinessAttentionWarning), central locking with remote control, speed limiter 160 km/h, rear wall insulation, traffic sign recognition with intelligent speed assist (ISA), electric windows for front doors, front airbags for driver and passenger with belt tensioners, first aid kit, preparation for alcohol interlock, 20-liter AdBlue tank under cab, towing capacity 3.5 t, standard GVW, weight variant 1900/2240 kg, ESP system, steel wheels, rear parabolic spring reinforced, single leaf, 63 l fuel tank between frame side members, manual parking brake, front cross-leaf spring standard plastic, standard suspension, front axle, rear axle ratio i 3.12, settings for special fuels (HVO/GTL), heated fuel filter, automatic torque converter transmission HI-MATIC 8HP, comfort sound insulation, cargo area lighting 3 LED, rear doors opening angle 260°, external cargo lights above rear doors, seat heating, luxury driver’s seat with armrest and lumbar support, adjustable in height, tilt and length, hydraulically suspended, heated, preparation for digital tachograph 4.1, additional speed limiter, VDI interface (Vehicle Data Interface) for telematics services (FMS), version 4.0, mirrors for 2200 mm body width, reversing camera with dynamic guidelines, radiator grille with chrome inserts, My Iveco Infotainment 10-inch, leather steering wheel, USB socket for driver and passenger side, air conditioning with automatic climate control, adaptive cruise control (ACC), White IC 194, tires 225/65R16 We are happy to provide a trade-in offer for your used vehicle. Should you wish to lease or finance your vehicle, we would be delighted to provide an individual offer. Subject to errors and prior sale! Mr. Rudolph is happy to assist you by phone at: Djdpfeyrw Sgsx Adiock For further information, please visit our homepage: ... ESP, particulate filter, partition wall = Further Information = Engine displacement: 2,998 cc GVW: 3,500 kg Please contact Tobias Ebert for more information.

Stanje: novo, prevoženi kilometri: 500 km, moč: 115 kW (156,36 KM), barva: bela, vrsta prenosa: samodejen, dolžina tovornega prostora: 25.000 mm, širina tovornega prostora: 18.000 mm, višina nakladalnega prostora: 19.000 mm, Oprema: ABS, centralno zaklepanje, klimatska naprava, servovolan, Mr. Rudolph will be happy to assist you by phone at: Comfort passenger seat with armrest and lumbar support, adjustable for height, tilt, and longitudinal position, hydraulically suspended; comfort driver seat with armrest and lumbar support, adjustable for height, tilt, and longitudinal position, hydraulically suspended; 2 LED cargo area lights; deletion of EC control unit; daytime running light control; accident data recorder; light and rain sensor; manual high beam assist; bodybuilder interface; mirrors for body width of 2200 mm; tire pressure monitoring system (TPMS); proactive lane-keeping assist (ELK); emergency braking assistant AEBS with CityBrake; digital radio DAB with 7-inch touchscreen; electrically adjustable and heated exterior mirrors; overhead storage above the cab; driver fatigue warning system (Driver Drowsiness Attention Warning); speed limiter 160 km/h; traffic sign recognition with intelligent speed assist (ISA); electric windows for front entry doors; front airbags for driver and passenger with belt tensioners; 20 liter AdBlue tank under the cab; ball-type trailer coupling; towing capacity 3.5 t; 63 L fuel tank; automatic torque converter transmission HI-MATIC 8HP; rear doors with 260° opening angle; wooden floor in cargo area; reversing camera with dynamic guidelines; leather steering wheel; overhead shelf above the windscreen; air conditioning with automatic climate control; 235/65R16 tires, and much more. Mr. Rudolph will be happy to assist you by phone at: Should you wish to lease or finance the vehicle, we will gladly provide you with an individual offer. We are also happy to accept your used commercial vehicle as a trade-in. Errors and prior sale excepted! Further information can be found on our homepage: ... ESP, particulate filter, partition wall = Further Information = Engine capacity: 2,287 cc Dcodpfx Asyfrrzsdisk Gross vehicle weight: 3,500 kg Please contact Tobias Ebert for further information.

Stanje: novo, prevoženi kilometri: 500 km, moč: 115 kW (156,36 KM), barva: bela, vrsta prenosa: samodejen, dolžina tovornega prostora: 25.000 mm, širina tovornega prostora: 18.000 mm, višina nakladalnega prostora: 19.000 mm, Oprema: ABS, centralno zaklepanje, klimatska naprava, servovolan, Mr. Rudolph is happy to assist you by phone at: Comfort passenger seat with armrest and lumbar support, adjustable in height, tilt, and longitudinal direction, hydraulically suspended; comfort driver's seat with armrest and lumbar support, adjustable in height, tilt, and longitudinal direction, hydraulically suspended; 2 LED cargo area lights; tachograph (EU), deactivated; daytime running light system; accident data recorder; light and rain sensor; manual high beam control; body builder interface; mirrors for a body width of 2200 mm; tire pressure monitoring system (TPMS); proactive steering assistant with lane departure warning (ELK); emergency braking assistant AEBS with CityBrake; digital radio DAB with 7-inch touchscreen; electrically adjustable and heated exterior mirrors; storage compartment above driver’s cab; driver drowsiness attention warning; speed limiter 160 km/h; traffic sign recognition with Intelligent Speed Assist (ISA); electric windows for front doors; front airbags for driver and passenger with seat belt pre-tensioners; 20-liter AdBlue tank under driver's cab; ball-type trailer coupling; trailer load capacity 3.5 t; fuel tank 63 liters; HI-MATIC 8HP automatic torque converter transmission; rear doors with 260° opening angle; wooden floor in the cargo area; reversing camera with dynamic guidelines; leather steering wheel; roof storage above windshield; automatic climate control; tires 235/65R16, etc. Mr. Rudolph is happy to assist you by phone at:. If you wish to lease or finance the vehicle, we will be pleased to provide a customized offer. We are also happy to accept your used commercial vehicle in part exchange. Errors and prior sale excepted! Further information can be found on our homepage: ... ESP, particulate filter, partition wall Dcedpfx Adoyfvd Uoiok = More information = Engine displacement: 2,287 cc gross vehicle weight: 3,500 kg Please contact Tobias Ebert for further information.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Djdpfjmhhypjx Adiock Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Dcsdpfx Aemhh Dhsdiek - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) Dedpfomhh Dzjx Adieck - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standards - Technical telephone support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. When installing outdoors, loading capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening materials (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts available for reorder and extensions can be supplied at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm Dcodpfx Adjmhhx Isiok - Includes fixing materials (without floor anchors) - With assembly instructions and C4 load labels as per DIN standard - Professional telephone advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with pre-delivery notification. Material is packaged for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowels, and able to accommodate the applied loads. Floor quality, load-bearing capacity, and any required official permits are to be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to the German employers’ liability insurance association, it is recommended that the rack uprights have a minimum 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard type - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms as standard (=4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards Dcsdpjmhhyaofx Adiek - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable transport with prior notice before delivery. The material is efficiently packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The foundation must be made of concrete, level, suitable for dowelling, and able to bear the applied loads. The suitability and load-bearing capacity of the floor, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to a wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the upright has at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg Dodpfx Aomhh Anodiock - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. Dsdpfjh Ek Daex Adisck The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Materials are sensibly packaged to ensure easy unloading. Dcedpfjmhhf Sjx Adisk When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Screw system in hot-dip galvanized design: Pickup price: Robust steel construction made of IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section: 1,200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Each upright equipped with 3 bolted cantilever arms, usable depth 1,200 mm, standard (equals 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Mounting hardware included (ground anchors not included) Dcedpsmhhl Hofx Adiok Supplied with assembly instructions and C4 load capacity labels according to DIN standards

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever racking system, powder-coated (RAL 7016 Anthracite): Scope of delivery: - 4 uprights, height 4,200 mm with base part, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm - Longitudinal and diagonal bracing for 1,300 mm upright spacing (system length 4,000 mm) - Fastening materials (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered; extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface coated in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with usable depth of 1,200 mm Dedomidyfepfx Adisck - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms as standard (= 4 storage levels) - Load capacity per arm: 730 kg - Includes longitudinal and diagonal braces for 1,300 mm upright spacing - System length: 4,000 mm - Fastening materials included (floor anchors not included) - Supplied with assembly instructions and C4 load plates according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance delivery notice. The material is sensibly packed for easy unloading. Delivery is possible approximately 1–2 weeks after order receipt. Please note: For outdoor installation, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, and suitable for anchoring, and must be able to take the imposed loads. Customers are responsible for verifying soil condition, load-bearing capacity, and obtaining any necessary official permits. Uprights must be anchored to the floor by the customer; wall mounting is neither necessary nor recommended. According to trade association guidelines, uprights should project at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking, used: Hot-dip galvanized bolt-together system Dodpfsmkixwox Adijck Scope of delivery: - 4 double-sided racking uprights, height 3,500 mm, each with 1,200 mm base parts - 24 cantilever arms, depth 1,200 mm, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. mounting hardware (floor anchors not included) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available anytime) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components with hot-dip galvanized finish - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright has 6 bolted cantilever arms and 2 base sections, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (floor anchors not included) - Supplied with assembly instructions and C4 rated load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection available Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notice before delivery. The material is packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, flat, and suitable for anchoring as well as capable of supporting the applied loads. It is the customer's responsibility to check and ensure the suitability and load-bearing capacity of the substrate and obtain any necessary permits. Racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to German safety guidelines, it is recommended that the uprights have a minimum overhang of 500 mm above the highest storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack used: bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable, extensions possible anytime) - (*Offer also available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) Dsdpfx Adjmhh Dtoieck - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Goods are packed for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, level, suitable for anchors, and able to withstand the applied loads. The customer is responsible for checking and ensuring the floor condition, load-bearing capacity, and any required official approvals. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational health and safety regulations, it is recommended that racks have at least a 500 mm overhang above the top storage level relative to the top edge of the upright.

Stanje: zelo dobro (rabljeno), Rotary plate Diameter: 100 mm Length: 380 mm Width: 160 mm Thickness: 32 mm Weight: 4 kg Other sizes available on request. Dodpfjln Ukcjx Adieck

Stanje: zelo dobro (rabljeno), Step clamp (28366) Dcsdpfxsln Ulaj Adisk Clamping height: 200 - 250 mm T-slot width: 12 mm Clamping screw: M10 4 pieces available Weight: 8.5 kg

Stanje: novo, Leto izdelave: 2026, Vaši kontaktni partnerji v našem podjetju Gospod: Andre Evering Gospod: Mario Klöver Gospod: Simon Blank Vključeno v obseg dobave: 01x Podaljšek končnega nosilca, novo Izvedba: univerzalna Barva materiala: RAL 5010 encijan modra Skupna višina: 650 mm Uporabna višina: 500 mm Teleskopska dolžina: 600 - 1.150 mm globina Dimenzija okvirnega profila: 45 x 45 mm kotnik Vzorčno vrtanje: 5 x 25 mm Premer lukenj: 30 x 10 mm Teža: 6,83 kg / kos Naše storitve na enem mestu: (Cene na povpraševanje) - Montaža, vgradnja Upoštevajte naše splošne montažne pogoje - Pregled regalov Inšpekcija regalov po DIN EN 15635, izvedena po zahtevah BGR 234 vizualni pregled za vse regalne sisteme - Dostava z lastnim voznim parkom (brez razklada) Dsdpedd Ev Njfx Adisck Stroški pošiljanja na povpraševanje!

Stanje: dober (rabljeno), Your contacts at our company: Dsdsdz Uxqjpfx Adieck Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank We are offering a used rack impact guard for sale. Suitable for a double rack row: 2 x 1,100 mm rack depth + 200 mm rack connector Scope of delivery: 01x Impact guard rail, used Material color: yellow Total length: approx. 2,455 mm Total length without base plate: approx. 2,400 mm Suitable for a double rack row Total depth: approx. 150 mm Total height: approx. 315 mm Profile dimensions: U 100 x 50 x 10 mm Material thickness: approx. 8 mm Hole diameter: approx. 13 mm Required floor anchors: 8 pcs Our range of services at a glance: (Prices upon request) Assembly and installation Our general assembly conditions must be observed Rack inspection Rack inspection according to DIN EN 15635, carried out in accordance with BGR 234 visual inspection requirements for all rack systems Delivery with our own fleet (unloading not included)

Stanje: dober (rabljeno), Tehnični podatki o prečki za paletni regal: Sistem regala: Jung Heinrich Tip: MPB Vključeno v dobavo: 01x prečka za paletni regal, nova Barva materiala: vroče pocinkana Profil škatle: 160 x 50 x 1,75 mm Tip prečke: AUF'B'E0436 Agrafa: 4 HK (kljuke) Svetla širina: 3.400 mm 02x varnostnih zatičev, rabljeni Izvedba: popolnoma pocinkani Za zavarovanje vzdolžnih nosilcev Proti nenamernemu dvigu Dodpsx Hpgyofx Adieck Vaši kontaktni partnerji v našem podjetju: Gospod: Andre Evering Gospod: Mario Klöver Gospod: Falk Deutsch Splošne informacije o artiklu: Ta artikel je na voljo samo za osebni prevzem. Kakršnakoli dodatna želena dostava ali pošiljanje tega artikla je povezana z dodatnimi stroški, ki jih je mogoče pri nas posebej preveriti glede na kraj dostave oziroma obseg dobave.

Stanje: dober (rabljeno), Technické údaje k paletovému regálovému nosníku: Regalni sistem: Dexion Tip: Speedlock Super 4 V obseg dobave je vključeno: 01x Paletni regalni nosilec, rabljen Barva materiala: sendzimir pocinkano Tip nosilca: SLB 110 Škatlasti profil: 110 x 50 mm Zaponka: 4 HK (kljuke) Svetla širina: 2.995 mm Dcedpfoxzqfkex Adisk 02x Varnostni zatiči, rabljeni Izvedba: popolnoma pocinkana Za zavarovanje nosilcev proti nenamernemu dvigu Vaši kontakti v našem podjetju: Gospod: Andre Evering Gospod: Mario Klöver Gospod: Falk Deutsch Splošne informacije o artiklu: Ta artikel je na voljo samo za osebni prevzem. Če želite prevoz ali dostavo tega artikla, so s tem povezani dodatni stroški, ki jih je mogoče posamično preveriti glede na kraj dostave oziroma obseg pri nas.

Stanje: dober (rabljeno), Tehnični podatki za prečko paletnega regala: Regalni sistem: Polypal Tip: Stockpal Obseg dobave: 01x prečka za paletni regal, rabljena Barva materiala: oranžna Škatlasti profil: 100 x 50 mm Tip: SKVBN 09850NP33 Agrafa: 3 HK (kljuke) Dcedpfxexz Apho Adisk Svetla širina: 2.700 mm Največja nosilnost na par prečk: 1.600 kg, pri enakomerno porazdeljeni obremenitvi 02x varnostni zatič, rabljen Izvedba: popolnoma pocinkan Za zavarovanje prečk pred nenamernim dvigovanjem Vaši kontakti v našem podjetju: G.: Andre Evering G.: Mario Klöver G.: Falk Deutsch Splošne informacije o artiklu: Ta artikel je na voljo samo za osebni prevzem. Dodatni prevoz oziroma pošiljanje tega artikla je mogoče za doplačilo, ki je odvisno od lokacije in obsega dobave ter ga lahko posebej preverite pri nas.