Amtec Izl-Sd S nakup rabljenega (83.390)

Stanje: novo, Leto izdelave: 2025, Weighing unit with 10 weighing heads (large hoppers for bulky products), each with a 5.5-liter volume for extremely precise weighing. Special design for salads or similar products: hammered surface, adjustable rotating upper cone, and reinforced linear feeder, anti-blocking unit, washable design. Specifications: max. machine cycle rate (idle): 40 cycles/minute; weight range: 10–5000g; accuracy: +/-0.5–2.0g; touchscreen operation (large version); stainless steel; 220V/2.0kW; dimensions and weight: L1900 x W1266 x H1900 mm; 700/750kg. Hjdpfsv Nmryox Afasp The machine/system is also available in additional configurations for different packaging sizes and packaging speeds. Please note that our new prices are often lower than typical used equipment prices. Feel free to contact us and specify your packaging requirements. Typically, we have 30–50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from around 3 weeks. All machines are supplied with a full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical filling machine with servo drive for packaging liquids OR pastes into flat pouches. Includes liquid dosing unit for liquids/pastes with high OR low viscosity. - Specifications: max. machine cycle speed (idle): 70 cycles/minute; suitable for volumes from 0-1000ml; filling temperature up to 80°C; accuracy: +/- 1.0% (depending on product); max. film width: 430mm; bag size: max. 340x210mm; compressed air: 1.5m³, 6 bar; 220V, 4.8kW; OMRON encoder for bag length control, PANASONIC/Autonics print mark sensor, 7" touchscreen, OMRON PLC, AIRTAC pneumatic components, OMRON PID temperature control, electronic components by SCHNEIDER / OMRON, stainless steel version (SS304), including hot stamp printer (2 lines, 10 characters). Dosing unit: Pump for fill range 100-1000ml; 40 liter hopper tank with double wall and hot water circulation; machine dimensions: L1080xW1300xH1400mm; weight: 550kg. Please note that our new machine prices are often below the typical prices for used machines. Please feel free to inquire and tell us about your packaging requirements. – We usually have 30-50 different new machines available from stock for immediate delivery at any time. For custom-built machines, we offer very short lead times from about 3 weeks. – All machines come with full warranty. Hjdpov Nmzzsfx Afaop

Leto izdelave: 2025, stanje: novo, Net bag packaging machine. Suitable for PE net bags in pillow or gusseted form for fresh vegetables and fruit, such as potatoes, onions, apples, cabbage, peas, carrots, peaches, lemons, grapefruits, kiwis, etc. Complete stainless steel version, PLC control with touchscreen. Print mark sensor. Suitable films: PE net, net/film composite, etc. Bag types: flat bags, stand-up pouches with or without carrying handle. - Specifications: max. film width: 800mm; bag length: 100-480mm; bag width: 160-390mm; max. machine cycle rate (idle): 15 cycles/minute; compressed air: 0.40m³/6 bar; power: 220V, 4kW. The machine/system is also available in various models for different packaging sizes and speeds. Hedpev Nm Arefx Afaop Please note that our new prices are often below usual used equipment prices. Feel free to inquire and tell us about your packaging requirements. – We usually have 30-50 different new machines in stock for immediate delivery. For customer-specific machines, we offer very short lead times starting from about 3 weeks. – All machines are supplied with a full warranty.

Stanje: novo, Leto izdelave: 2025, Net bag packaging machine. Suitable for PE net bags in pillow or gusseted form, for fresh vegetables and fruit such as potatoes, onions, apples, cabbage, peas, carrots, peaches, lemons, grapefruits, kiwis, etc. Fully stainless steel construction, PLC control with touchscreen. Print mark sensor. Suitable films: PE net, mesh/film composites, etc. Bag types: flat bags, stand-up pouches with/without carrying handle. – Specifications: max. film width: 1000mm; bag length: 100–600mm; bag width: 240–490mm; max. machine cycle speed (unloaded): 14 cycles/minute; compressed air: 0.60m³/6bar; power: 220V, 5kW. The machine/plant is also available in further versions for various packaging sizes and speeds. Please note that our new equipment prices are often below typical used equipment prices. Feel free to inquire and let us know your packaging requirements. – We usually have 30–50 different new machines available for immediate delivery from stock. For custom-built machines, we offer very short delivery times, starting from approx. 3 weeks. – All machines come with a full warranty. Hjdev Nm Axepfx Afajp

Leto izdelave: 2025, stanje: novo, X-ray inspection system for medium-sized packages and pouches. Suitable for detecting foreign objects made of metal, glass, stone, plastic, etc. in food or non-food items. Hjdjv Nm Iujpfx Afaop - Specifications: Conveyor belt width: 410 mm; detection accuracy: Pb from Ø 0.2 mm, Fe from Ø 0.28 mm, SUS from Ø 0.28 mm, non-metallic such as stone, glass from Ø 1.2 mm; X-ray power: 80 kVp, 7 mA; detector resolution: 0.4 mm; X-ray emission: < 1 µSv/h; conveyor belt height: 850 ± 30 mm; conveyor speed (product-dependent): 10 – 100 m/min; user interface: 15" touchscreen; software: intellisens® X-ray; operating temperature: 5 – 35 °C; reject system: available optionally as per requirements; power supply: 220 VAC, 50/60 Hz; system dimensions: L900xW920xH1825 mm; weight: 350 kg. Please note that our new prices are often below typical used machine prices. Feel free to inquire and let us know your packaging application. We usually have 30–50 different new machines available from stock at all times. For custom-built machines, we offer very short lead times starting at approx. 3 weeks. All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Checkweigher for determining whether the product meets the target weight. 3 rejection stations, each with 2-way sorting. – Specifications: Belt width: 220 mm, weighing range: 5–1000 g; accuracy: +/- 0.3–3 g; max. machine cycle rate (idling): 80 cycles/minute; power supply: 220V, single-phase; machine dimensions (mm) approx.: L2459 x W684 x H780 (weighing conveyor). Please note that our new prices are often below typical used equipment prices. Simply enquire and let us know your packaging requirements. – We typically have 30–50 different new machines available from stock at any given time. For custom-built machines, we offer very short delivery times starting from about 3 weeks. – All machines are supplied with a full warranty. Hodpfx Asv Nm Rpofasp

Stanje: novo, Leto izdelave: 2025, VFFS machine with 14-head multihead weigher for bulk materials and granulates. Compact design without platform frame. Suitable for producing pillow bags with back seam, gusseted stand-up pouches (gusset tool required) OR pyramid-shaped pouches (special sealing unit required). The vertical packaging machine is equipped with: touchscreen; PLC; photoelectric sensor (print mark detection) for sealing/cutting position; servo-driven end seal unit; servomotor for film transport; thermal transfer printer for batch number, date, and best-before date. - Multihead weigher specifications: Number of weighing heads: 14 heads; weighing range (single drop): 1~60g; volume per head: 0.3L; weighing accuracy: X(0.5); discharge gate: single flap; surface finish: smooth (optional dimpled); product-contacting parts: AISI 304 (optionally AISI 316 at extra cost). - VFFS machine specifications: max. idle cycle rate: 85 cycles/min; bag size: L(40-250)xW(50-170)mm (double film draw available for longer bags); suitable film width: 120-360mm; product-contacting parts: AISI 304 (optionally AISI 316 at extra cost); power supply: 220V, 50/60Hz; power consumption: 4.5kW; required compressed air: 0.4-0.8MPa; air consumption: 0.15m³/min; dimensions (LxWxH): 1400*1320*2040mm; weight: 590kg. Hjdpfov Nm T Dox Afaop Please note that our new prices are often lower than typical used equipment prices. Feel free to inquire and tell us about your packaging requirements. Typically, 30-50 different new machines are always available ex stock. For custom-built machines, we offer very short delivery times starting from approx. 3 weeks. All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, VFFS machine with 10-head multihead weigher for bulk materials and granulates. Compact design, no platform frame required. Suitable for the production of pillow bags with back seam, gusseted stand-up pouches (gusset tooling required), OR pyramid-shaped bags (special sealing unit required). The vertical form fill seal machine is equipped with: touchscreen; PLC; photoelectric sensor (print mark detection) for sealing/cutting position; pneumatic sealing unit for end sealing; servo motor for film feed; thermal transfer printer for batch number, date, and best-before date. - Multihead weigher specifications: Number of weighing heads: 10; Weighing range (per discharge): 10–1500 g; Volume per weighing head: 2.5 L; Weighing accuracy: X(0.5); Discharge chute: double flap; Surface finish: smooth (optionally dimpled surface); product-contact parts made of AISI 304 (AISI 316 optionally available at extra cost). Hjdpfx Afov Nm U Usasp - VFFS machine specifications: Max. cycle rate (idle): 60 cycles/min; Bag size: L(40–300) x W(70–270) mm (dual film draw available for longer bags); Suitable film width: 160–560 mm; Product-contact parts made of AISI 304 (AISI 316 optionally available at extra cost); Power supply: 220V, 50/60 Hz; Power consumption: 4.5 kW; Required compressed air: 0.4–0.8 MPa; Air consumption: 0.2 m³/min; Dimensions (LxWxH): 2266 x 1416 x 2538 mm; Weight: 900 kg.

Stanje: novo, Leto izdelave: 2025, VFFS machine with 14-head multihead weigher for bulk materials and granulates. Compact design without platform frame. Suitable for producing pillow bags with back seam, gusseted stand-up pouches (gusset tool required) OR pyramid-shaped bags (special sealing unit required). The vertical packaging machine is equipped with: touchscreen; PLC; photoelectric sensor (print mark detection) for sealing/cutting position; servo-driven end-sealing unit; servo motor for film feed; thermal transfer printer for batch number, date, best-before date. - Multihead weigher specifications: Number of heads: 14; Weighing range (single dump): 10-1500g; Volume per head: 2.5L; Weighing accuracy: X(0.5); Discharge gate: double flap; Surface finish: smooth (optional dimpled surface); product-contact parts made of: AISI 304 (AISI 316 available as an option). - VFFS machine specifications: Max. idle machine cycle speed: 80 cycles/min; Bag size: L(40-300)xW(70-270)mm, (double film feed for longer bags possible); Suitable film width: 160-560mm; Product-contact parts made of: AISI 304 (AISI 316 available as an option); Power supply: 220V, 50/60Hz; Power consumption: 5.5kW; Required compressed air: 0.4-0.8MPa; Air consumption: 0.2m³/min; Dimensions (LxWxH): 2266*1416*2538mm; Weight: 970kg. Hedpfx Asv Nnalefasp

Leto izdelave: 2025, stanje: novo, VFFS machine with 10-head multihead weigher for bulk materials and granulates. Compact design without a platform frame. Suitable for producing pillow bags with back seam, gusset stand-up pouches (gusset tool required), OR pyramid-shaped pouches (special sealing unit required). The VFFS machine operates in an inclined position to protect fragile products such as thin frozen foods or baked goods. The vertical form-fill-seal machine is equipped with: touchscreen; PLC; photoelectric sensor (print mark detection) for sealing/cutting position; pneumatic sealing unit for end sealing; servo motor for film transport; thermal transfer printer for batch number, date, and best-before date. - Multihead weigher specifications: Number of weighing heads: 10; weighing range (per discharge): 2~200g; hopper volume per head: 0.5L; weighing accuracy: X(0.5); discharge gate: single flap; surface finish: smooth (optional dimpled surface); product contact parts made of AISI 304 (AISI 316 available at extra cost). - VFFS machine specifications: Max. idle cycle speed: 55 cycles/min; bag size: L(40-250)xW(50-170)mm (double film draw-off possible for longer bags); suitable film width: 120-360mm; product contact parts made of AISI 304 (AISI 316 available at extra cost); power supply: 220V, 50/60Hz; power consumption: 3.7kW; required compressed air: 0.4-0.8MPa; air consumption: 0.5m³/min; dimensions (LxWxH): 1866*1316*2158mm; weight: 600kg. Please note that our prices for new machines are often below typical used equipment prices. Just ask and tell us your packaging requirements. – We generally have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times, starting from around 3 weeks. – All machines come with full warranty. Hsdpfsv Nnaxjx Afaop

Stanje: novo, Leto izdelave: 2025, VFFS machine with integrated free-fall metal detector for inspecting vertically falling products, equipped with a 14-head multihead weigher for bulk materials and granulates. Compact design without a platform frame. Suitable for producing pillow bags with back seal, gusseted stand-up pouches (gusset tool required) OR pyramid-shaped bags (special sealing unit required). The vertical form fill seal machine is equipped with: touchscreen; PLC; photosensor (print mark detection) for seal/cut position; servo-driven sealing unit for end seals; servo motor for film draw-off; ribbon printer for batch number, date, and best before date (BBD). - Multihead weigher specifications: Number of weighing heads: 14; Weighing range (single discharge): 1~60g; Volume per head: 0.3L; Weighing accuracy: X(0.5); Discharge flap: single flap; Surface finish: smooth (optionally dimpled); Product contact parts: AISI 304 (optional upgrade to AISI 316 at extra cost). - Free-fall metal detector specifications: Sensitivity: FE from Ø 1.2mm, AISI from Ø 2.5mm; pipe diameter: according to forming collar. - VFFS machine specifications: max. machine cycle rate (idle): 90 cycles/minute; bag size: L(40-250)xW(50-170)mm (double film draw-off possible for longer bags); suitable film width: 120-360mm; product contact parts: AISI 304 (optional AISI 316 at extra cost); power supply: 220V, 50/60Hz; required compressed air: 0.4-0.8MPa. Please note that our new prices are often below the usual prices for used machines. Feel free to contact us and let us know your packaging requirements. - Typically, 30-50 different new machines are always available from stock for immediate delivery. For custom-manufactured machines, we offer short lead times of approx. 3 weeks. - All machines are available with full warranty. Hedpfxsv Nnbce Afasp

Leto izdelave: 2025, stanje: novo, VFFS machine with integrated gravity metal detector for inspecting vertically falling products, equipped with a 14-head multihead weigher for bulk materials and granulates. Compact design without platform frame. Suitable for producing pillow bags with back seal, gusseted stand-up pouches (gusset tooling required) OR pyramid-shaped bags (special sealing unit required). The vertical form-fill-seal machine is equipped with: touchscreen; PLC; photo sensor (print mark detection) for sealing/cutting position; servo-driven sealing unit for end sealing; servo motor for film pull-off; thermal transfer printer for lot number, date, best-before date. - Multihead weigher specifications: Number of weighing heads: 14; weighing range (per single discharge): 10–1500g; volume per weighing head: 1.6L; weighing accuracy: X(0.5); discharge chute: single gate; surface finish: smooth (optionally dimpled); product-contact parts made of: AISI 304 (optionally AISI 316 at extra charge). - Gravity metal detector specifications: Sensitivity: FE from Ø 1.2mm, AISI from Ø 2.5mm; tube diameter: according to forming collar. - VFFS machine specifications: max. machine cycle rate (no load): 65 cycles/min; bag size: L(70–270)×W(70–270)mm (double film feed for longer bags possible); suitable film width: 160–560mm; product-contact parts made of: AISI 304 (optionally AISI 316 at extra charge); power supply: 220V, 50/60Hz; required compressed air: 0.4–0.8MPa. Please note that our new equipment prices are often below typical used equipment prices. Just contact us and let us know your packaging requirements. – We generally have 30–50 different new machines available immediately from stock. For custom-built machines, we offer very short delivery times from about 3 weeks. – All machines are available with full warranty. Hsdsv Nnb Ajpfx Afaop

Stanje: novo, Leto izdelave: 2025, Vertical form-fill-seal machine for the production of pillow bags with back seam and gusseted stand-up pouches (gusset former required). Equipped with: quick-change forming set; SIEMENS PLC; WEINVIEW touchscreen; photoelectric sensor (print mark detection) for sealing/cutting position; servo-driven end sealing unit; servo motor for film draw-off; ribbon coder for batch number, date, and expiry date (best before date). - VFFS machine specifications: max. machine cycle rate (idle): 90 cycles/minute; bag size: L(40-200)xW(30-150)mm; suitable film width: 80-320mm; product-contact parts made of AISI 304 (optionally, AISI 316 at additional cost); power supply: 220V, 50/60Hz; power consumption: 4kW; required compressed air: 0.7MPa; compressed air consumption: 0.1-0.3m³/min; weight: 320kg. Hedpfxev Nncae Afajp Please note that our new prices are often below typical used equipment prices. Feel free to send us an enquiry and tell us about your packaging requirement. – We usually have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short delivery times starting from approximately 3 weeks. – All machines are supplied with full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical Form-Fill-Seal (VFFS) packaging machine for producing pillow bags with back seal and gusseted stand-up pouches (gusset tool required). Equipped with: quick-change forming set; SIEMENS PLC; WEINVIEW touchscreen; photoelectric sensor (registration mark detection) for sealing/cutting position; servo-driven end-sealing unit; servo motor for film transport; thermal transfer printer for batch number, date, and best-before date. Specifications VFFS machine: max. machine cycle rate (idle): 85 cycles/minute; bag size: L(60-340)xW(70-250)mm (dual film draw-off L = 500mm), gusseted stand-up pouch: L(60-340)xW(60-200)xD(30-90)mm (dual film draw-off L = 500mm); suitable film width: 160-520mm; product-contacting parts made of AISI 304 (optionally AISI 316 at surcharge); power supply: 220V, 50/60Hz; power consumption: 5.4kW; required compressed air: 0.7MPa; air consumption: 0.15-0.35m³/min; weight: 510kg. Please note: our new machine prices are often lower than standard used equipment prices. Feel free to contact us with your packaging requirements. - We typically have 30–50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times, starting at approx. 3 weeks. - All machines come with a full warranty. Hodpfxjv Nncye Afajp

Stanje: novo, Leto izdelave: 2025, Vertical form-fill-seal machine for producing pillow bags with back seam and gusseted stand-up pouches (gusseting tool required). Equipped with: quick-change forming set, SIEMENS PLC, WEINVIEW touchscreen, photoelectric sensor (print mark detection) for sealing/cutting position, servo-driven end sealing unit, servo motor for film transport, thermal transfer printer for batch number, date, and expiration date. - VFFS Machine Specifications: Maximum idle cycle rate: 75 cycles/minute; Bag size: L(60-380)xW(130-300)mm (double film draw-off L = 650mm), Gusseted stand-up pouch: L(60-380)xW(80-250)xD(30-100)mm (double film draw-off L = 650mm); Suitable film width: 280-630mm; Product-contact parts: AISI 304 (optionally AISI 316 at extra cost); Power supply: 220V, 50/60Hz; Power consumption: 5.6kW; Required compressed air: 0.7MPa; Air consumption: 0.25-0.35m³/min; Weight: 600kg. Hedpfxsv Nnc Te Afaep Please note that our new prices are often below typical used machine prices. Feel free to contact us with your packaging requirements. We usually have 30-50 different new machines available immediately from stock. For custom-built machines, we offer very short lead times starting from around 3 weeks. All machines are available with full warranty.

Leto izdelave: 2025, stanje: novo, Vertical form-fill-seal (VFFS) packaging machine for the production of pillow bags with back seal and gusseted stand-up pouches (gusset tooling required). Equipped with: quick-change forming set; SIEMENS PLC; WEINVIEW touchscreen; photo sensor (print mark detection) for sealing/cutting position; servo-driven end seal unit; servo motor for film feed; thermal transfer printer for batch number, date, and best-before date (BBD). - Specifications VFFS machine: max. machine speed idle: 60 cycles/min; bag size: L(60-500)xW(120-410)mm (with double film feed L=800mm), gusseted stand-up pouch: L(60-500)xW(100-350)xD(40-150)mm (with double film feed L=800mm); suitable film width: 260-850mm; product-contacting parts made of AISI 304 (optional: AISI 316 at extra charge); power supply: 220V, 50/60Hz; power consumption: 8.0kW; compressed air required: 0.7MPa; compressed air consumption: 0.25-0.40m³/min; weight: 770kg. Hedpfxjv Nndwe Afaep Please note that our new prices are often lower than typical used equipment prices. Simply send us your enquiry and let us know your packaging requirements. – Generally, 30-50 different new machines are always available from stock for immediate delivery. For customer-specific machines, we offer very short lead times from approx. 3 weeks. – All machines are supplied with full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical packaging machine for the production of pillow bags with back seam, gusseted stand-up pouches (gusseting tool required), OR for pyramid-shaped bags (special sealing unit required). Equipped with: touchscreen; PLC; photoelectric sensor (register mark detection) for seal/cut positioning; pneumatic end-sealing unit; servo motor for film feed; thermal transfer printer for batch numbers, date, best-before date. - VFFS machine specifications: max. machine cycle rate (no load): 40 cycles/minute; bag sizes: L(40-650)xW(140-450)mm (double film feed for longer bags possible); suitable film width: 220-920mm; product-contacting parts made of AISI 304 (optionally AISI 316 available at extra cost); power supply: 220V, 50/60Hz; power consumption: 4.5kW; required compressed air: 0.2-0.8MPa; compressed air consumption: 1.0m³/min; dimensions (LxWxH): 2470*1730*2065mm; weight: 1150kg. Hsdpfxjv Nnd Ds Afajp Please note that our new machine prices are often below the usual second-hand prices. Just inquire and let us know your packaging requirements. - We usually have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short delivery times starting from about 3 weeks. - All machines are supplied with a full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical packaging machine for producing pillow bags with back seam and gusseted stand-up pouches (gusset tool required). Equipped with: quick-change forming set, SIEMENS PLC, WEINVIEW touchscreen, photoelectric sensor (print mark detection) for sealing/cutting position, servo-driven sealing unit for end sealing, servo motor for film feed, thermal transfer printer for batch number, date, and best before date. - VFFS Machine Specifications: Maximum machine cycle rate (unloaded): 45 cycles/min; Bag size: L(60-500)xW(200-510)mm (double film feed L = 900mm), Gusseted stand-up pouch: L(60-500)xW(140-420)xD(60-200)mm (double film feed L = 900mm); Suitable film width: 420-1050mm; Product-contact parts made of: AISI 304 stainless steel (AISI 316 available at extra cost); Power supply: 220V, 50/60Hz; Power consumption: 8.5kW; Required compressed air: 0.7MPa; Air consumption: 0.25-0.40m³/min; Weight: 980kg. Hodpfxjv Nnd Rj Afajp Please note that our new prices are often below typical used machinery prices. Feel free to inquire and describe your packaging requirements. Generally, 30-50 different new machines are available from stock for immediate delivery. For customer-specific machines, we offer very short lead times starting from approximately 3 weeks. All machines come with a full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical form-fill-seal machine for producing pillow bags with back seal, gusseted stand-up pouches (gusseting tool required) OR pyramid-shaped bags (special sealing unit required). Equipped with: touchscreen; PLC; photo sensor (print mark detection) for sealing/cutting position; pneumatic sealing unit for end sealing; servo motor for film draw-off; thermal transfer printer for batch number, date, and best-before date. - VFFS machine specifications: max. idle cycle rate: 40 cycles/minute; bag size: L(40-700)xW(165-515)mm (double film draw-off possible for longer bags); suitable film width: 300-1050mm; product-contact parts: AISI 304 (optionally AISI 316 at extra charge); power supply: 220V, 50/60Hz; power consumption: 5.5kW; required compressed air: 0.2-0.8MPa; compressed air consumption: 1.2m³/min; dimensions (LxWxH): 2430*1860*2140mm; weight: 1250kg. Hjdpfx Afov Nnfbjajp Please note that our new machine prices are often lower than typical used equipment prices. Feel free to contact us and let us know your packaging requirements. - We typically have 30-50 different new machines available immediately from stock. Additionally, for custom-built machines, we offer very short delivery times starting from approx. 3 weeks. - All machines are supplied with a full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical form-fill-seal (VFFS) machine for producing pillow bags with longitudinal seam and gusseted stand-up pouches (gusset tool required). Equipped with: quick-change forming set; SIEMENS PLC; WEINVIEW touchscreen; photoelectric sensor (print mark detection) for sealing/cutting position; servo-driven sealing unit for end sealing; servo motor for film feed; thermal transfer printer for batch number, date, best before date. - Specifications VFFS machine: max. machine cycle rate (unloaded): 30 cycles/minute; bag size: L(60-600)xW(200-585)mm (double film draw-off L = 1100mm), gusseted stand-up pouch: L(60-600)xW(140-500)xD(100-250)mm (double film draw-off L = 1100mm); suitable film width: 420-1200mm; product-contacting parts made of: AISI 304 (optionally AISI 316 at extra charge); power supply: 220V, 50/60Hz; power consumption: 8.7kW; required compressed air: 0.7MPa; air consumption: 0.25-0.40m³/min; weight: 1060kg. Hsdpfxjv Nnfno Afasp Please note that our new machine prices are frequently lower than typical used machine prices. Simply inquire and let us know your packaging requirements. - Generally, 30-50 different new machines are available immediately from stock. For custom-built machines, we offer very short lead times from approx. 3 weeks. - All machines come with a full warranty.

Stanje: novo, Leto izdelave: 2025, Horizontal cartoner for inserting products into folding cartons. Suitable for a wide variety of solid products, such as tubes, bottles/vials, ampoules, vials, blister packs, cosmetic jars, and vacuum-packed foods. In addition to the product, a brochure or package insert (e.g., instructions for use, manual, etc.) can also be included. The fully automatic packaging process comprises product feeding, carton erecting, product insertion, brochure/leaflet insertion, carton closing, and onward transportation. Fast changeover within the size range to different carton formats is possible simply by adjusting the parameters (no format part or cavity change required). PLC control with touchscreen operating monitor (menu available in multiple languages, e.g., English, German, etc.). - Specifications: Carton dimensions: L(50-200)xW(20-85)xH(15-75)mm; Carton/paperboard thickness requirement (min-max): 250-450g/m²; Max. machine speed idle: 100 cycles/min; Power supply: 380V, 3-phase; Compressed air and consumption: 5-8 bar, 0.16m³; Machine dimensions LxWxH: 3500x1500x1600mm; Weight: 1200kg. Please note that our new equipment prices are often below typical used machine prices. Feel free to inquire and let us know your packaging application. Generally, 30-50 different new machines are always available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from approximately 3 weeks. All machines come with full warranty. Hjdpfxsv Nkwgo Afaop

Leto izdelave: 2025, stanje: novo, Fully automatic thermoforming machine: Cups/containers are formed, filled, and sealed with film. Suitable for vacuum, gas, and modified atmosphere packaging of food products, meat, seafood, fruit, vegetables, medical items, and household goods. Key components made from stainless steel, easily replaceable modular forming molds, water cooling system for the thermoforming tool and sealing unit. Vacuum pump by BUSCH (Germany), PLC, touchscreen, and servo motor by OMRON, relays and circuit breakers by SCHNEIDER. Top packaging materials: heat-sealable films; bottom packaging materials: thermoformable sealing film; both rigid and flexible films can be used. Specifications: Total power: 380V, 13kW; Compressed air: 1m³/6bar; Vacuum: 0.8–1.0m³/6bar; Water: 4 liters/min; Max. top film width: 390mm (usable width 350mm); Cavity length: 200mm; Max. forming depth: 80mm (dependent on bottom film thickness); Loading area: standard 1m (optional extra length available); Packaging capacity: 6 cycles/min; Machine dimensions: L4560×W1020×H1950mm; Weight: 1500kg. Please note that our new machine prices are often below typical used prices. Feel free to inquire and let us know your specific packaging requirements. Generally, 30-50 different new machines are available for immediate delivery from stock. For custom-built machines, we offer very short lead times from approximately 3 weeks. – All machines come with full warranty. Hsdpfx Aev Nkz Sofaep

Leto izdelave: 2025, stanje: novo, Fully automatic thermoforming machine: cups/containers are formed, filled, and sealed with film. Suitable for vacuum, gas, and modified atmosphere packaging of food products such as sandwiches, meat, seafood, fruits, and vegetables, as well as non-food products, medical items, and household goods. Key components are made of stainless steel; easily interchangeable modular trays; water cooling system for the thermoforming tool and sealing module. Vacuum pump by BUSCH, pneumatic components by SMC, electronic components mainly from Schneider, photo sensors from SICK, PLC and touchscreen by Delta. Hsdpsv Nk Acsfx Afajp Specifications: Top packaging materials: heat-sealable films, width: max. 400 mm; bottom packaging materials: thermoformable sealing film (rigid and flexible films may be used), thickness: 300 – 900 µm, width: max. 400 mm + 2 mm, forming depth: max. 80 mm (forming depth depends on the thickness of the bottom film); loading area: standard 120–150 cm (additional length available as option); max. idle machine cycle: 8 cycles/minute; power supply: 3P, 380V, 50/60 Hz; compressed air: 1.2 m³/min, 8 bar. Please note that our new prices are often below the usual prices for used equipment. Feel free to contact us and let us know your packaging requirements. We usually have 30–50 different new machines available from stock for immediate delivery. For custom-made machines, we offer very short lead times starting from approximately 3 weeks. – All machines come with a full warranty.

Stanje: novo, Leto izdelave: 2025, Stand-alone linear scale for filling weights from 200 to 5,000g, designed for installation on conveyor belts or workstations. Stainless steel version with servo motor. Hsdjv Nk Dmspfx Afaep Specifications: Accuracy: < +/- 2g (depending on product and total weight); max. machine cycle rate in idle mode: 15 cycles/minute; Power supply: 380V, 0.7kW; Machine dimensions: L875 x W860 x H2010mm; Weight: 180kg. Please note that our new prices are often lower than typical used equipment prices. Feel free to inquire and tell us about your packaging requirements. We usually have 30-50 different new machines available from stock for immediate delivery. For machines manufactured to customer specifications, we offer very short lead times from around 3 weeks. – All machines are available with a full warranty.

Stanje: novo, Leto izdelave: 2025, Standalone filling system for pastes or viscous substances into cans, containers, etc. Stainless steel version, manual operation via foot pedal or automatic filling with adjustable speed. Can be operated either with the supplied hopper or via vacuum through a tube from a separate tank. The filler moves inside the container from bottom to top during the filling process. Suitable for various viscous products (e.g., pastes, creams, ointments). - Specifications: Accuracy: +/- 0.5%; max. machine cycle rate (idle): 30 cycles/minute; Power supply: 220V, max. 1.0kW. Hodpfxjv Nk Hbs Afaep Please note that our new prices are often below typical used equipment prices. Feel free to contact us and let us know your packaging requirements. We typically have 30-50 different new machines immediately available from stock. For custom-built machines, we offer very short delivery times starting from approx. 3 weeks. All machines are supplied with a full warranty.