4.000 X 1.100 Mm / Tip M / P90X75X1,80 Mm nakup rabljenega (122.392)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Lsdpfemhh Dhex Ac Ujaf - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth Lasdpfxemhh Dze Ac Uof - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standards - Technical telephone support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. When installing outdoors, loading capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Lsdpomhhx Iefx Ac Ueaf Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening materials (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts available for reorder and extensions can be supplied at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fixing materials (without floor anchors) - With assembly instructions and C4 load labels as per DIN standard - Professional telephone advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with pre-delivery notification. Material is packaged for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowels, and able to accommodate the applied loads. Floor quality, load-bearing capacity, and any required official permits are to be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to the German employers’ liability insurance association, it is recommended that the rack uprights have a minimum 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard type - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms as standard (=4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable transport with prior notice before delivery. Laedpemhhyaofx Ac Usf The material is efficiently packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The foundation must be made of concrete, level, suitable for dowelling, and able to bear the applied loads. The suitability and load-bearing capacity of the floor, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to a wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the upright has at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) Lodpfx Acsmhh Ans Usaf - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized Laedpsh Ek Dajfx Ac Uef - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing Lajdpfsmhhf Ssx Ac Usf - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Materials are sensibly packaged to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever racking system, powder-coated (RAL 7016 Anthracite): Scope of delivery: - 4 uprights, height 4,200 mm with base part, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm - Longitudinal and diagonal bracing for 1,300 mm upright spacing (system length 4,000 mm) - Fastening materials (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered; extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface coated in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with usable depth of 1,200 mm - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms as standard (= 4 storage levels) - Load capacity per arm: 730 kg - Includes longitudinal and diagonal braces for 1,300 mm upright spacing - System length: 4,000 mm - Fastening materials included (floor anchors not included) - Supplied with assembly instructions and C4 load plates according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance delivery notice. The material is sensibly packed for easy unloading. Delivery is possible approximately 1–2 weeks after order receipt. Ljdpfjmidyfsx Ac Uoaf Please note: For outdoor installation, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, and suitable for anchoring, and must be able to take the imposed loads. Customers are responsible for verifying soil condition, load-bearing capacity, and obtaining any necessary official permits. Uprights must be anchored to the floor by the customer; wall mounting is neither necessary nor recommended. According to trade association guidelines, uprights should project at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking, used: Hot-dip galvanized bolt-together system Scope of delivery: - 4 double-sided racking uprights, height 3,500 mm, each with 1,200 mm base parts - 24 cantilever arms, depth 1,200 mm, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. mounting hardware (floor anchors not included) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available anytime) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components with hot-dip galvanized finish - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright has 6 bolted cantilever arms and 2 base sections, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (floor anchors not included) - Supplied with assembly instructions and C4 rated load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection available Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notice before delivery. The material is packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. Ledpfx Acomkixwj Usaf The base must be concrete, flat, and suitable for anchoring as well as capable of supporting the applied loads. It is the customer's responsibility to check and ensure the suitability and load-bearing capacity of the substrate and obtain any necessary permits. Racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to German safety guidelines, it is recommended that the uprights have a minimum overhang of 500 mm above the highest storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack used: bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable, extensions possible anytime) - (*Offer also available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized Lodpfxomhh Dto Ac Ueaf - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Goods are packed for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, level, suitable for anchors, and able to withstand the applied loads. The customer is responsible for checking and ensuring the floor condition, load-bearing capacity, and any required official approvals. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational health and safety regulations, it is recommended that racks have at least a 500 mm overhang above the top storage level relative to the top edge of the upright.

Stanje: dober (rabljeno), Technical Data for the Crate Racking System: Racking System: Stow Type: Midirack Setup Specifications: Number of rack rows: 01 pcs. Rack length: 2,810 mm Number of bays per row: 01 pcs. Number of levels plus ground level: 06 pcs. Scope of delivery includes: 02x Rack frames, used Frame finish: Sendzimir galvanized Frame section dimensions: 55 x 45 x 1.5 mm Including horizontal and diagonal braces, base plates The frames are pre-assembled 2,000 mm high 600 mm deep Laodpfxev Hnt Hj Ac Usf 08x Beam pairs, used Beam finish: yellow Z-profile: 74 x 30 mm Clasp: 2 HK (hooks) Clear span: 2,700 mm 16x Safety pins, used Finish: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting 04x Chipboards, used Thickness: 22 mm Width: approx. 2,680 mm Depth: approx. 590 mm Surface: optionally coated (optionally two-piece) 24x Collapsible crates, used Manufacturer: Bekuplast Colour: grey Material: Polypropylene External dimensions: approx. 600x400x400 mm (LxWxH) Internal dimensions: approx. 555x360x385 mm (LxWxH) Handles: open on short sides / closed on long sides Weight: 3.41 kg per piece Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. If transport or shipping is required, additional costs will apply, which can be requested from us depending on the delivery location and scope.

Stanje: dober (rabljeno), Technical Data for the Pallet Racking System: Rack System: Redirack Technical Data for Installation: Number of Rack Rows: 01 unit Lsdpfxjwhyqfo Ac Uoaf Length per Rack Row: approx. 14,048 mm Number of Bays per Rack Row: 05 units at 2,710 mm each Number of Levels incl. floor level: 02 units Scope of Delivery: 06x Pallet Rack Frames, used Material finish: Sendzimir galvanized Frame type: H Profile dimensions: 83 x 85 x 2.5 mm Including cross and diagonal braces, base plates The frames are pre-assembled (bolted truss construction) Height: 2,300 mm Depth: 1,100 mm 20x Pallet Rack Beams, used Material finish: yellow Box profile: 100 x 50 mm Connector: 6 HK (hooks) Clear width: approx. 2,710 mm Max. load per beam pair: 2,000 kg, with evenly distributed load 40x Safety Pins, used Material finish: Sendzimir galvanized To secure the beams against unintentional lifting 24x Wedge Anchors, new Manufacturer: Hilti Type: HST2 M12x105/10 Spec: Carbon steel, galvanized Approved for: cracked concrete 12x Shims, used Spec: fully galvanized For leveling the rack frames on uneven floors 01x Load Plate Specifying bay and compartment loads, manufacturer, and order number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General Information about the Item: This item is offered for collection only. Any transport or shipment beyond this is subject to additional costs, which can be individually requested from us depending on the place of delivery and scope of supply.

Stanje: dober (rabljeno), Technical data for pallet rack beam: Racking system: Stow Type: Pal Rack NS Each beam features two holes (approx. 16 mm diameter) on the top, bottom, and front views for diagonal bracing attachment. The delivery includes: - 01x pallet rack beam, used Colour: orange U-profile: 150 x 50 x 3.00 mm Version: header beam Connector: 4 hook (4 HK) Clear span: approx. 1,400 mm - 02x locking pins, used Description: fully galvanized For securing cross beams against unintentional lifting General information about this item: This item is offered for collection only. Transport or shipment beyond collection is subject to additional costs, which can be quoted separately depending on the delivery location and scope. Lasdpfx Acelgzqcj Ujf

Stanje: novo, Your contacts in our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank We are offering a new square tube for sale. Scope of delivery includes: 01x Square tube, new Material finish: hot-dip galvanized Ljdpjdzq Scofx Ac Ueaf Total length: 6,050 mm Profile dimensions: 50 x 50 mm Wall thickness: 2 mm Steel grade: S235JRH/275JRH Customs tariff number: 73066192 Manufactured according to: EN 10219-1 Our range of services at a glance: (Prices on request) Assembly and Installation Our general assembly conditions apply. Racking Inspection Racking inspection according to DIN EN 15635, performed in accordance with the requirements of BGR 234. Visual inspection for all racking systems. Delivery using our own fleet (without unloading)

Stanje: dober (rabljeno), Technical Data for Pallet Rack Beam: Racking System: Link 51 Type: Boltless XL Scope of Delivery Includes: 01x Pallet Rack Beam, used Material Color: yellow Box Profile: 80|53 x 45|25 mm Beam Type: 4 BST Step Profile: H 28 mm, W 20 mm Bracket: 4 HK (hooks) Clear Width: 2,700 mm Max. Load per Pair of Beams: 900 kg, with evenly distributed load 02x Locking Pins, used Design: fully galvanized For securing the horizontal beams against accidental lift-out Further Information on the Pallet Rack Beam: Beam type 4 BST is intended for use with chipboard, steel panels, or similar inserts, which then finish more or less flush with the upper edge of the beams. Ljdpfokv Urwjx Ac Usaf This design results in no loss of height; additionally, the front side of the step beam protects the shelves or insert panels from damage. The beams are not intended for pallet storage, but rather serve as picking levels, i.e., for storing cartons, small parts, or similar items.

Stanje: zelo dobro (rabljeno), The scope of delivery includes: 02x Workbench stands, used Material color: Sendzimir galvanized Frame profile: 90 x 75 x 2.00 mm Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal braces, base plates The stands are pre-assembled (bolted truss) 04x Workbench beams, used Material color: RAL 7035 light grey Box profile: 80 x 40 mm Beam type: TRV1-240-084-30CE Clear span: 2,400 mm 08x Safety pins, new Version: completely galvanized 01x Particle board, 2nd choice, used Particle board thickness: 38 mm Width: 2,580 mm Depth: 600 mm Surface: optionally coated (possibly two-piece) 01x Particle board, 2nd choice, used Particle board thickness: 38 mm Width: 2,380 mm Depth: 600 mm Surface: optionally coated (possibly two-piece) 16x Self-drilling screws, new Lodpfxoi Ewqke Ac Ueaf Version: galvanized Dimensions: 6.3 x 70 mm Images are for illustration of the material. Material color may vary. Particle boards may be coated or uncoated. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - Production time is typically approx. 5 working days.

Stanje: dober (rabljeno), Included in the scope of delivery: 01x shelf connector, used Material color: blue Manufacturer: Vogelsang Type: NS Suitable for frame profile width: approx. 70 mm For shelf spacing: approx. 250 mm Dimensions of head plates: 130 x 60 mm Profile dimensions: U 62 x 45 mm Weight: approx. 1.66 kg | piece General information about the item: Laedpfsi Hpkxex Ac Uef This item is only available for collection. If transportation or shipping of this item is required, additional costs will apply. These costs may vary depending on the delivery location and/or quantity, and can be quoted upon request.

Stanje: zelo dobro (rabljeno), Your contacts at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Technical Data for the Pallet Rack Beam: Racking System: META (Thyssen) Scope of delivery includes: 01x Pallet rack beam, used Material colour: Orange Lajdpfx Aeiimtqec Usf Beam type: HN 100|20 Box profile: 100 x 50 mm Bracket: 3 HK (hooks) Clear span: 2,700 mm Max. load per pair of beams: 2,100 kg, with evenly distributed load 02x Locking pins, used Design: Fully galvanized For securing the beams against accidental lifting General information about the item: This item is only offered for collection. Any additional transportation or shipping of this item is subject to extra costs, which can be quoted separately depending on the place of delivery or scope of delivery. Overview of our services: (Prices on request) Assembly, installation Our general installation conditions apply Racking inspection Racking inspection in accordance with DIN EN 15635 as per the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Stanje: dober (rabljeno), Technical data for CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Lsdpfxeidchce Ac Usaf Scope of delivery includes: 01x CS Sigma profile, used Material finish: sendzimir galvanized Total length: approx. 5,500 mm CS Sigma profile dimensions: approx. 350 x 85 x 25 x 12 mm Material thickness: approx. 2.00 mm

Stanje: dober (rabljeno), Technical data for pallet rack beams: Racking system: Dexion Type: Speedlock P90 Scope of delivery includes: 01x pallet rack beam, used Material colour: light blue Box profile: 100 x 50 mm Beam type: SLO 102|2 Connector: 5 HK (hooks) Clear span: 3,300 mm Max. load per pair of beams 1,300 kg, with evenly distributed load 02x safety pins, used Version: fully galvanized Lodpfsnh H Dmsx Ac Uoaf For securing the crossbeams against unintentional lifting

Stanje: kot nova (razstavni stroj), Technical data for the wide-span rack beam: Rack system: SSI Schäfer Type: WR 600 Included in the scope of delivery: 01x Wide-span rack beam, second-choice Material colour: RAL 5010 gentian blue Box profile: 60 x 40 x 1.25 mm Beam type: TR4-240-064-25CEL QV71|71|3 Clear span: 2,400 mm 02x Safety pins, used Version: fully galvanized For securing the longitudinal beams against unintentional lifting Lasdpfx Acehtippj Ujf General information about the item: This item is only available for collection. If transport or shipping of this item is required, it will incur additional costs, which can be individually requested from us depending on delivery location and scope.

Stanje: dober (rabljeno), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Scope of delivery includes: 01x Roller track, used Ljdehhyprepfx Ac Ueaf Frame colour: galvanized Frame profile: approx. 35 x 28 mm (W x H) Roller colour: similar to cream white Total length: approx. 2,025 mm Total width: approx. 35 mm Roller width: approx. 17 mm Roll spacing: approx. 25 mm Roller diameter: approx. 25 mm Total height: 35 mm Roller material: plastic General information about the item: This item is only available for collection. If additional transport or shipping of this item is required, extra costs will apply. These can be requested from us separately depending on the place of delivery or the scope of delivery. Our services at a glance: (Prices on request) Assembly, installation Our general assembly terms and conditions apply Racking inspection Rack inspection according to DIN EN 15635, carried out in accordance with the requirements of BGR 234 (visual inspection) for all racking systems Delivery with our own fleet (unloading not included)

Stanje: dober (rabljeno), Technical data for pallet rack beam: Shelving system: Dexion Type: P 90 Scope of delivery includes: 01x Pallet rack beam, used Material color: Sendzimir galvanized Box profile: 100 x 50 mm Beam type: SLB 100|13 Connector: 5 hooks Clear span: 2,800 mm Lasdpfx Acewfmyne Uef 02x Safety pin, used Specification: Sendzimir galvanized For securing the longitudinal beams Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Any transportation or shipping beyond this is subject to additional costs, which can be requested separately depending on destination or scope of delivery.

Stanje: rabljeno, Technical data for wide-span shelving: Laodpfx Asv Hzfvoc Uof Shelving system: Stow Type: Midirack Installation data: Number of shelving rows: 1 unit Rack length: 2,810 mm Number of bays per row: 1 unit Number of levels incl. ground level: 5 units Scope of delivery: 2x Upright frames, used Material finish: Sendzimir galvanized Upright profile dimensions: 55 x 45 x 1.5 mm Incl. horizontal and diagonal braces, Base plates Uprights pre-assembled Height: 2,000 mm Depth: 700 mm 10x Beams, used Material finish: yellow Z-profile: 74 x 30 mm Connector: 2 hooks Clear bay width: 2,700 mm 20x Safety pins, used Material finish: Sendzimir galvanized For securing the beams against unintended lifting 5x Chipboard panels, used Thickness: 22 mm Width: approx. 2,680 mm Depth: approx. 690 mm Surface: coated if applicable (may be supplied in two parts) Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about this item: This item is only offered for collection. If transport or shipping beyond this is required, additional costs will apply, which can be quoted separately according to delivery location and scope.

Stanje: dober (rabljeno), Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Required scope of supply for the push-through protection: 01x U-profile, used Material color: cream white Total length: approx. 1,870 mm Profile dimensions: U: 60 x 45 mm Material thickness: approx. 4.00 mm Weight per piece: approx. 9.57 kg Including 2 pivotable brackets (Agraffen) Number of hooks: 4 hooks per bracket 02x Locking pins, used Material color: Sendzimir galvanized Additional information: Rack system: Vogelsang Lsdpfx Acjhh Hu Uj Uoaf Type: NS Suitable for clear span: approx. 1,800 mm Overhang: approx. 65 mm Two original brackets are attached to the U-profile. With these, the push-through protection is hooked into the upright and secured with locking pins. The images relating to the installation of the push-through protection are for illustrative purposes only. Material colors may vary. General information about the item: This item is available for collection only. If transport or shipment of this item is required, additional costs will apply. These costs can be requested from us depending on the delivery location and scope. Our services at a glance: (Prices on request) - Assembly and installation (our general assembly conditions apply) - Rack inspection according to DIN EN 15635, carried out in accordance with the requirements of BGR 234, visual inspection for all rack systems - Delivery with our own fleet (without unloading)