Skladišče z visokimi skladišči Premikanje paletnih regalov

Dexion P90 / K:100 x 50mm / lichte Weite: 2.800 mm

Stanje: novo, Leto izdelave: 2024, obratovalne ure: 5 h, Funkcionalnost: popolnoma funkcionalen, Heli electric forklift, very robust, no unnecessary electronics Equipped with sideshift, lighting, indicators, rear-view mirror, overhead guard, trailer coupling, and power steering. Solid rubber tires at the front, pneumatic tires at the rear. Iedpev A Rq Tjfx Al Nsia Comes with charger. Length: 2,200 mm Width: 1,120 mm Height: 2,130 mm Lift height: 3,000 mm Total weight: 2,935 kg

Stanje: novo, Leto izdelave: 2025, skupna višina: 4.000 mm, skupna dolžina: 7.000 mm, skupna širina: 3.000 mm, trajanje garancije: 24 meseci, temperatura: 80 °C, potreba po zraku: 36.000 m³/h, vhodna napetost: 380 V, ogrevalna zmogljivost: 345 kW (469,07 KM), moč: 40 kW (54,38 KM), gorivo: utekočinjeni naftni plin (LPG), poraba energije: 40 kWh, izolacijski material: Mineralwolle, debelina izolacije: 50 mm, nazivna moč: 345 kW (469,07 KM), Oprema: osvetlitev, MAIN SPECIFICATION Our spray booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. All processes inside the booth are managed via a PLC system, ensuring consistent adherence to set values. OPERATING PRINCIPLES OF THE BOOTH Processes inside the booth are controlled via an operator panel, which manages the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn from outside, passed through front filters, and directed into the plenum chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) capture paint particles, and the air passes through final exhaust filters before being released. FLASH-OFF PROCESS After painting, the booth continues to run for approximately 15 minutes to extract residual solvents and thinners. During this phase, fresh air from outside continues to circulate within the booth. DRYING PROCESS In this phase, 80% of the air circulating through the booth is heated to 60°C and supplied into the booth through a distribution system. As approximately 20% of the solvent is released during drying, it is expelled together with this air. Industrial coatings are typically cured at 60°C, but booth temperature can be adjusted via the operator panel as needed. COOLING PROCESS After the 30-minute drying phase, the heating coil is deactivated from the operator panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels manage the functions and operation of all machinery and equipment inside the booth. The panel is made of durable galvanized sheet metal and steel sections and is fully enclosed to protect against dust and moisture. Electrical devices and control panel: • The control panel contains essential components such as circuit breakers, fuses, signal lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for the command and control connections between the control panel and motors or other electrical equipment. Iiedpfxewzmcbj Al Nja • Electrical wiring is designed to allow for relocation of the booth if required. • Operating equipment uses 380 V 50 Hz, while control devices use 220 V. • The booth operating time can be monitored on the electronic panel for easy maintenance tracking. • Temperature and timer settings for flash-off, intermediate drying, and final drying can be easily programmed to the required values on the electronic control panel’s digital display. • Users can monitor and adjust drying times via the heating thermostat and timer relay.

Stanje: rabljeno, Electric Forklift JUNGHEINRICH Type EFG 216 Serial No.: FN413671 Year of manufacture: 2011 Load capacity: 1,600 kg Lift height: 4,800 mm Fork length: 1,220 mm Fork carriage width: 980 mm Overall height: 2,120 mm Operating voltage: 48 Volt - Triplex mast with full free lift 1,550 mm - Hydraulic side shifter - 2 travel speeds - Battery from year 2015, Type 06 EPZS C750 SC (48 Volt, 750 Ah) - Automatic charger, 48 Volt - 3-wheel solid rubber tyres, front 18 x 7-8, rear 140/55-9 - According to hour meter: 14,725 operating hours read - Power steering - Front work lights - New safety inspection (UVV/TÜV) available for an extra charge of EUR 150 net Length without forks: 2,000 mm Isdoinwzhjpfx Al Nsia Overall width: 1,080 mm Own weight without battery: 2,390 kg Own weight with battery: 3,480 kg

Leto izdelave: 1978, stanje: rabljeno, številka stroja/vozila: 1010, Roller diameter 1,000 mm Bandsaw blade length 7,100 mm Max. cutting width: 960 mm Max. cutting height: 620 mm Motor: 5.5 kW Iiedpfjhzgnzjx Al Noa Table size: 1,450 x 1,030 mm Installation dimensions (L x W x H): 1,900 x 1,160 x 3,130 mm Sale in "as is" condition, ex location Seevetal, without freight and packaging, subject to prior sale.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2014, obratovalne ure: 5.087 h, nosilnost: 1.000 kg, dvižna višina: 5.000 mm, prosto dvigovanje: 1.640 mm, vrsta goriva: električni, tip droga: triplex, gradbena višina: 2.200 mm, dolžina vilic: 1.200 mm, vrsta pogona: Elektro, Reach Truck Load Center: 600 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Triplex Transmission: Electromechanical Iisdou D Tfaopfx Al Noa Condition: Ready for operation and fully functional Technical Condition: Very good Front Tyres Type: Vulkollan Rear Tyres Type: Vulkollan Battery Voltage: 48V Battery Capacity: 465Ah Battery Manufacturer: Hawker Battery Type: PzS Battery Year: 2014 Description: In addition to this machine, we offer other forklifts and warehouse equipment. All our equipment is workshop-inspected and conforms to FEM 4.004 standards. Please contact us by email or phone. You can also find us at hsr-gabelstapler. We will gladly purchase your used equipment, even if you do not buy a machine from us. Lease-purchase and financing under favourable terms are available upon request. We are happy to provide you with expert and comprehensive advice regarding our vehicles. Side shifter, 3rd valve, full free lift, non-marking tyres, joystick control, single pedal, 3-wheel, seat,

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2016, nosilnost: 1.000 kg, vrsta goriva: električni, vrsta prenosa: samodejen, stanje pnevmatik: 100 odstotek, barva: srebrn, Vertical order picker in like-new condition with minimal operating hours for sale CROWN LP3520 vertical order picker, only 6 operating hours! Crown LP 3520-1.0 Year of manufacture: 2016 Operating hours: 6h Ijdpfx Aleh Ryrfj Njia Charger type: Filon Futur 24V 75A Rated load at COG: 1 t Wheelbase: 1.285 m Transport length: 2.88 m Transport width: 0.95 m Transport height: 2.3 m Lift height: 2.44 m Aisle width: 1.4 m Load center: 600 mm Drive motor: 1.5 kW Lift motor: 2.5 kW Weight: 1.437 t Battery weight: 0.457 t Battery capacity: 24/325 V/Ah Travel speed with/without load: 9.5/5.9 km/h Lifting with/without load: 0.12/0.16 m/s Lowering with load: 0.22/0.17 m/s Turning radius: 1.589 m

Stanje: rabljeno, Regalna noga: 5000 × 1500 mm, 17 kosov Regalna noga: 5500 × 1300 mm, 8 kosov Regalna noga: 3500 × 1100 mm, 5 kosov Regalna noga: 5500 × 510 mm, 3 kosi Regalni steber: 5000 mm, 11 kosov Prečka: 1350 × 65 mm, 199 kosov Prečka: 1350 × 60 mm, 19 kosov Isdpexcua Uefx Al Noia Vozičkova tirnica: 8650 mm, 28 kosov Vozičkova tirnica: 7860 mm, 12 kosov Vozičkova tirnica s končnim čepom: 6000 mm, 40 kosov Končni del vozička: 40 kosov Ojačitev regalne noge: 1400 mm, 70 kosov 1 voziček + polnilec + daljinski upravljalnik

Stanje: rabljeno, Naprodaj: Dvojni paletni zlagalnik Rabljeni SAFETECH dvojni podajalnik / zlagalnik palet Model: PDHTD Velikost palete: 1170 x 1170 x 150 mm (Chep / Loscam palete) Kapaciteta palet: 2 x 25 palet (2 lijaka) Napajanje: 415V, 3-fazno Upravljanje: popolnoma samodejno in polavtomatsko Razpršilnik palet vključuje: Kompresor in zračni rezervoar Hidravlična pogonska enota Zaščitna ograja Navodila za uporabo in vzdrževanje Cena: na povpraševanje Nova cena te naprave je bila okoli 40.000,- Če imate kakršna koli vprašanja, me prosim kontaktirajte Machinehandel De Leeuw BV Naslov za obisk: Oordeelsestraat 7 b, NL-5111 PA Baarle-Nassau / Nizozemska Iedpfx Alegbd A Ej Nsia

Stanje: dober (rabljeno), Technical Data for the Pallet Rack Beam: Racking System: Bito Type: PRO Scope of delivery includes: 01x Pallet rack beam, used Material color: blue Beam type: PT150S Box profile: 150 x 50 mm Iijdpfsw Eu Dnex Al Nea Connector: 5 HK (hooks) Clear span: 3,600 mm Max. load per pair of beams: 4,000 kg with evenly distributed load 02x Safety pins, used Version: fully galvanized For securing the cross beams Against accidental lifting Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping of this item is required, additional costs will apply, which can be requested individually based on delivery location and scope.

Stanje: dober (rabljeno), prosta razpetina: 3.300 mm, Technical specifications for the pallet racking beam: Racking system: SSI Schäfer Type: PR 600 Ijdsqizuvspfx Al Neia Scope of delivery includes: 01x pallet racking beam, used Material colour: grey Profile: INP 120 x 60 mm Beam type: head beam Bracket: 5 HK (hooks) Clear span: 3,300 mm Maximum load per pair of beams: 4,000 kg, with evenly distributed load 02x safety pins, used Version: sendzimir galvanized For securing the longitudinal beams against unintentional lifting Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for self-collection. Any desired transportation or shipping of this item will incur additional costs, which can be inquired from us separately depending on the place of delivery and scope of delivery.