Ca. 3,15 Lfm. Kragarmregal Langgutregal Konzolna Polica nakup rabljenega (12.072)

Stanje: rabljeno, Ta rabljena regalna polica META je kompaktna in prilagodljiva rešitev za skladiščenje v delavnicah, skladiščih, arhivih in podjetjih. Z višino 250 cm, globino 40 cm in skupno 6 skladiščnimi nivoji regal nudi dovolj prostora za pregledno shranjevanje škatel, zabojnikov, rezervnih delov ter drugega skladiščnega blaga. Modulni regalni sistem omogoča raznoliko uporabo in učinkovito izrabo obstoječega skladiščnega prostora. 100,06 m tekočih regalov z policami, 40 cm globine, rabljeni regali, regali za delavnice in skladišča, mali skladiščni sistemi, sestavljivi regali, skladišče za drobne materiale. Tehnični podatki: - Višina: cca 250 cm - Globina: cca 40 cm - Dolžina: cca 100,06 m teka Ponudba regalov 100,06 m teka obsega: - 0101 x stojko cca 200 x 40 cm, predmontirano - 0600 x polico cca 100 x 40 cm - 2400 x nosilec za polico - 0100 x križno vez - Proizvajalec: META CLIP - Nosilnost: 100 kg na polico ob enakomerno razporejeni teži - Nivoji: 6 skladiščnih nivojev Bedpfx Aozpvmcsltjlk - Površina: sendzimir pocinkana - Blago iz zaloge, rabljeno -- TAKOJ VEČKAT NA VOLJO -- Cena: 7.118,00 € neto plus zakoniti DDV Prejmete račun z izkazanim DDV. Prevoz: Na željo dostavo uredi naša partnerska špedicija, stroški so odvisni od poštne številke. Montaža: Naše usposobljeno osebje vam po potrebi nudi strokovno montažo in demontažo vaše opreme za podjetje. Naše priporočilo: Sporočite nam vaše potrebe… Z veseljem vam pomagamo pri uresničitvi vaših projektov, od načrtovanja do naročila in montaže. Imate vprašanja ali vas zanima? Kontaktirajte nas preko sporočila ali telefona. Našo telefonsko številko najdete na naši poslovni strani. ☎️ Dosegljivi smo od ponedeljka do petka, 8:00 - 15:00. Lahko pa nam pošljete sporočilo z vašim imenom in telefonsko številko, in kontaktirali vas bomo v najkrajšem možnem času.

Stanje: rabljeno, Leto izdelave: 2012, Pregled Ta mala pivovarna je pred kratkim prenehala z obratovanjem. Sprva je bilo načrtovano nadaljevanje delovanja, vendar to iz različnih razlogov ni bilo mogoče, zato se vsa oprema zdaj prodaja v kompletu. Oprema - Parni generator z gorilnikom na plinsko olje in pripadajočim rezervoarjem. - Trofazni mlin za mletje žit. - 800-litrski varilni kotel s parnim plaščem, ki vključuje kotel, filtracijski tank, "lunge" (vmesni rezervoar), flotacijski tank, cevni hladilnik, rezervoar za osmotsko vodo in 3 črpalke, potrebne za obratovanje. - Industrijske naprave za reverzno osmozo in mehčanje vode. - 4 atmosferski cilindrično-konični fermentorji s hladilnim plaščem in prostornino 1.000 litrov. - 3 atmosferski cilindrično-konični fermentorji s hladilnim plaščem in prostornino 1.300 litrov. - 1 hladilni sistem za fermentorje z nadzorno ploščo za temperaturo upravljano s PLC-jem. - 1 čistilna črpalka. - 1 pretočna črpalka. - Več cevi, potrebnih za pretok in pakiranje. - 1 atmosferski monoblok polnilni in zapiralni stroj za 33-cl steklenice z zmogljivostjo 1.200 posod/uro. - 2 kompresorja, potrebna za delovanje polnilnega stroja. - 1 ročni 6-glavni polnilni stroj za nujne primere in posebne steklenice. - Polavtomatski stroj za lepljenje etiket. Bodpfx Alsuzpipjtolk - 1 kompresor, potreben za delovanje etiketirke. - Termični tiskalnik z navijalcem za dodajanje spremenljivih podatkov na etikete. - 1 ročni viličar. - Hladilna komora dimenzij 6 m x 2,50 m x 3 m višine. - Industrijska tehtnica. - Vključno z vsemi sendvič paneli, iz katerih so izdelani proizvodni prostori.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, mobile air filtration extraction box Box with built-in fan and filter cartridge. Equipped with HEPA filter. For ventilation, filtration, and extraction of room air. Blsdpfevvcqxjx Altsk Extraction capacity approx. 1800 m³/h Exhaust fan: IMOFA DS 11-4, 460 Watt, 50 Hz, 4.8 Ampere Voltage: 230 V, 50 Hz Systemair RTRE 5 transformer controller 4 filter cartridges 1 ULTIMA RP HEPA filter, 3000 m³/h Aluminium frame housing, mobile with lockable castors Dimensions: 100 x 100 x 80 cm Weight: approx. 120 kg

Stanje: dober (rabljeno), Riello RL50 oil burner Output: approx. 15 kg/h Viewing by appointment only—please call in advance! Preferential sale to dealers, commercial traders, or for export. All information is given without guarantee; subject to errors and prior sale. The seller assumes no liability for typographical or data transmission errors. Bsdpfjpiqipsx Altolk Naturally, we can also handle all formalities for you. Loading possible.

Stanje: dober (rabljeno), Riello RLS50 oil and gas burner, 581 kW, approx. 15 kg/h Bledpfx Ajpiqiasltjk

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. Blodpsmhhypefx Altek We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) Bledpfx Aemhh Dhjltsk - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standards - Technical telephone support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. Blsdpomhh Dzsfx Altok When installing outdoors, loading capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof beams: Hot-dip galvanized bolt system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflector - 9 roof beams, 1,500 mm cantilever, pre-drilled for on-site roof construction (*excluding timber purlins and trapezoidal sheets for the roof construction) - Including longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and system can be extended at any time) Bsdpfx Aljh R Taqotelk - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction using IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof beams (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright fitted with 3 bolted cantilever arms, depth 1,200 mm, with deflector = 4 storage levels one above the other - Including longitudinal and diagonal braces with 1,500 mm center-to-center spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with scheduling prior to delivery. Material is sensibly packed for easy unloading. The installation surface must be concrete, level, suitable for dowelling, and able to withstand the loads applied. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any official permits that may be required. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to occupational health and safety regulations, it is recommended that the rack uprights have at least 500 mm clearance above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth Bedpsfdkb Tefx Altelk - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 2,600 mm with base, 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) Bsdod Tbbdjpfx Altolk - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signage C4 according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site pick-up possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight forwarding with advance notice prior to delivery. Material is packed sensibly to enable easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchors, and capable of bearing the imposed loads. The client is responsible for checking and ensuring the ground condition and load-bearing capacity, as well as obtaining any necessary permits if required by authorities. The rack uprights must be anchored to the floor by the client; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening materials (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts available for reorder and extensions can be supplied at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fixing materials (without floor anchors) - With assembly instructions and C4 load labels as per DIN standard - Professional telephone advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with pre-delivery notification. Material is packaged for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowels, and able to accommodate the applied loads. Floor quality, load-bearing capacity, and any required official permits are to be checked and ensured by the customer. Bsdpfsmhhx Ijx Altjlk The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to the German employers’ liability insurance association, it is recommended that the rack uprights have a minimum 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard type Blodpfsmhhyajx Altjk - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms as standard (=4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable transport with prior notice before delivery. The material is efficiently packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The foundation must be made of concrete, level, suitable for dowelling, and able to bear the applied loads. The suitability and load-bearing capacity of the floor, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to a wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the upright has at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. Bljdped Tqalefx Altjk When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: Bedpomhh Anofx Altelk - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) Bljdpfxsh Ek Das Altok - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. Bjdpfjfdkb Usx Altjlk According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards Bodpfjguk A Hjx Altelk - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Bjdpomhhf Ssfx Altelk Materials are sensibly packaged to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Screw system in hot-dip galvanized design: Pickup price: Bjdpfemhhl Hox Altjlk Robust steel construction made of IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section: 1,200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Each upright equipped with 3 bolted cantilever arms, usable depth 1,200 mm, standard (equals 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Mounting hardware included (ground anchors not included) Supplied with assembly instructions and C4 load capacity labels according to DIN standards

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: 9 rack uprights, height 4,230 mm with foot section, usable depth 1,200 mm 27 cantilever arms with usable depth 1,200 mm, with deflectors 9 roof beams with 1,500 mm cantilever, pre-drilled for customer-supplied roofing (*Without timber purlins and trapezoidal sheets for roofing) Including longitudinal and diagonal bracing for 1,500 mm upright spacing Including fasteners (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, 1,200 mm deep, with deflectors = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm upright spacing - Rack length: 12,100 mm - Including fasteners (excluding floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight shipping with prior delivery notification. The material is packed appropriately to enable easy unloading. The floor must be concrete, level, capable of being doweled, and able to bear the acting loads. The customer is responsible for checking and ensuring the floor condition, load capacity, and any necessary local permits. Blsdpfxomhhy Nj Altjk The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to trade association guidelines, the rack uprights should protrude at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever racking system, powder-coated (RAL 7016 Anthracite): Scope of delivery: - 4 uprights, height 4,200 mm with base part, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm - Longitudinal and diagonal bracing for 1,300 mm upright spacing (system length 4,000 mm) - Fastening materials (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered; extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface coated in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with usable depth of 1,200 mm - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms as standard (= 4 storage levels) - Load capacity per arm: 730 kg - Includes longitudinal and diagonal braces for 1,300 mm upright spacing - System length: 4,000 mm - Fastening materials included (floor anchors not included) - Supplied with assembly instructions and C4 load plates according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance delivery notice. The material is sensibly packed for easy unloading. Delivery is possible approximately 1–2 weeks after order receipt. Blsdpfx Aemidyfsltsk Please note: For outdoor installation, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, and suitable for anchoring, and must be able to take the imposed loads. Customers are responsible for verifying soil condition, load-bearing capacity, and obtaining any necessary official permits. Uprights must be anchored to the floor by the customer; wall mounting is neither necessary nor recommended. According to trade association guidelines, uprights should project at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking, used: Hot-dip galvanized bolt-together system Scope of delivery: - 4 double-sided racking uprights, height 3,500 mm, each with 1,200 mm base parts - 24 cantilever arms, depth 1,200 mm, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. mounting hardware (floor anchors not included) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available anytime) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components with hot-dip galvanized finish - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg Blodpfxemkixwe Altjk - Cantilever arms height-adjustable in 100 mm increments - Each upright has 6 bolted cantilever arms and 2 base sections, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (floor anchors not included) - Supplied with assembly instructions and C4 rated load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection available Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notice before delivery. The material is packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, flat, and suitable for anchoring as well as capable of supporting the applied loads. It is the customer's responsibility to check and ensure the suitability and load-bearing capacity of the substrate and obtain any necessary permits. Racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to German safety guidelines, it is recommended that the uprights have a minimum overhang of 500 mm above the highest storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth Bodpfx Ajguk Dksltelk - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm Bsdpfx Aljfdkbhetslk - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.