Stema Nizki Nakladalnik nakup rabljenega (1.819)

Stanje: novo, številka stroja/vozila: 628cde0fe99cc2d3c8eaa8dd8, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-Loader Trailer Steel welded construction Turntable with robust ball bearing slewing ring Foldable rear support 2 wheel chocks with holder Side underrun protection made of aluminium Full-width rear spray flap Half-shell mudguards on 1st axle with anti-spray flaps, anti-spray flaps behind 2nd and 3rd axle 1 plastic toolbox with shelf, dimensions: width=620 mm / height=360 mm / depth=440 mm, lockable with padlock (padlock not included) Extendable width up to 3,000 mm Storage compartment for wooden planks in the centre of the loading area 70 mm wooden planks for extension to 3,000 mm Tie-down lugs for low loader (40 lashing points) 1 pair of lashing cut-outs in the longitudinal beam at the front, recessed into the gooseneck, each rated at 10 t 4 pairs of lashing holes in the outer frame, each rated at 5 t (for securing with lashing straps) 7 pairs of lashing mushrooms, recessed at the top and side of the outer frame, each rated at 10 t 1 at the front on the gooseneck 6 in the low bed First lashing point 250 mm from the front, last max. 250 mm from the rear, spacing between lashing points not greater than 1,100 mm 5 pairs of stake pockets recessed in the outer frame, interior dimensions 70 x 40 mm (convertible to 5 t ring lashing points, not included) 2 additional pairs of folding lashing rings, each rated at 10 t 1 on the gooseneck (protruding) 1 behind the last axle, recessed in the floor Towing Device Turntable Trailer Drawbar with certified 40 mm towing eye Axles and Suspension Drum brake axles, manufacturer’s choice Axle/chassis laser alignment to reduce tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalisation (rocker equalisation) Wheels and Tyres 235 / 75 R 17.5 Manufacturer’s choice Steel rims, twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front with connecting lines to the tractor unit ABS and ALB, with ABS socket at the front and connecting cable Manufacturer: Wabco or Knorr Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane lights at the rear 2 x 7-pin non-interchangeable plugs at the front with connecting cable 1 LED beacon with bracket, switched with parking lights (removable beacon) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Gooseneck at the front with steel/chequer plate covering Toolbox recessed into transition slope to gooseneck Following area with 70 mm softwood floor, steel/chequer plate in wheel arch area Rear taper with 70 mm softwood floor Low-loader deck including rear taper: 6,500 mm Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Gjdpei Ri Ddofx Afwoub Timber surfaced With spring lift assistance Country of Registration / License Plates Country of registration: Germany 24/7-Service Hotline Prepared for two-line license plate holder Contour marking with reflective strips according to ECE R 048, white on sides, red at rear Warning sign according to ECE-70 Painting Frame hot-dip galvanized including passivation 15 years’ warranty against corrosion perforation Drawbar galvanized or black, manufacturer’s choice Loading ramps hot-dip galvanized Attention! Archive images shown!

Stanje: novo, številka stroja/vozila: 55d3c5c03e032385649769b1b, lastna masa: 9.900 kg, največja dovoljena obremenitev: 14.100 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-Loader Trailer Steel welded construction Turntable with heavy-duty slewing ring, integrated storage box incl. Turntable front structure Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection Full-width rear mud flaps Extendable widenings to 3,000 mm (not at rear taper) (track width of the machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Central compartment on loading area for timber planks 70 mm timber planks for widening to 3,000 mm Lashing points Low-loader 3 pairs of integrated lashing points, each rated to 10 t, at the front floor 6 pairs of mushroom lashing points, top and side integrated in outer frame, each 10 t 1 x at neck area remaining points distributed, distance no greater than 1,200 mm 1 x at rear taper 5 pairs of stake pockets integrated in the outer frame, internal size 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) Drawbar assembly for trailer turntable Drawbar with certified 40 mm towing eye Note: For 40 mm towing eye, the maximum permissible gross weight of the towing vehicle is 18,000 kg. Otherwise, a 50 mm towing eye is required. Axles + Suspension SAF drum brake axles Laser-aligned axles/chassis to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization front and rear (rocker compensation) Wheels and Tires 235 / 75 R 17.5 manufacturer's choice Steel twin wheels, factory silver Brake system 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connection lines to the truck ABS and ALB, with ABS connector at front, connection cable included Attention: The trailer may only be towed by vehicles that ensure ABS functionality! Electrics 24-volt multi-chamber lights, side yellow LED lighting 2 white front position lights 2 white/red rear lane marker lights 2 x 7-pin non-interchangeable connectors at the front, with connection cable 1 LED beacon with bracket, operated via parking lights (removable beacon) 2 pairs of warning boards, double LED-lit and extendable to 3,000 mm Floor Steel floor at front section thereafter 70 mm softwood floor, in wheel arch area with steel/chequer plate covering Rear taper with 70 mm softwood floor Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable wooden inlays spring-assisted lifting Operating instructions Exception permit required for 10,000 kg axle load, only indivisible loads allowed!!! The specified total weight is technically possible. Depending on the cargo, the full gross weight may not be achieved while observing permissible axle/pin/support loads (poor tracking and handling may result from incorrect load distribution) Country of Registration / Plates Registration country: Germany 1 with Dekra inspection and report (according to §13 EC-FGV) 24/7 service hotline prepared for 2-line license plate holder Conspicuity markings with reflective strips acc. ECE R 048, white on the sides, red at the rear Paint Frame RAL 3002 Carmine Red 10 years warranty against rust-through Godpfx Afji Ri I Eewsub Drawbar galvanized or black, at manufacturer's discretion Loading ramps hot-dip galvanized Attention: Archive photos!

Stanje: novo, številka stroja/vozila: 6d88bda3a1ee2464a81b34f36, lastna masa: 4 kg, največja dovoljena obremenitev: 13 kg, skupna masa: 18 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low Loader Trailer Steel welded construction with a slight central camber, turntable with heavy-duty ball bearing slewing ring, chocks with holders, quarter shell mudguards in front of and behind each axle. Lashing Points Low Loader Over front axle: 2 pairs of ring lashing eyes (each 5 t) at the front on the cranked section Low-bed: 4 pairs of lashing eyes (each 6 t) at the sides of the lowbed 5 pairs of lashing eyes (each 5 t) between the longitudinal beams Drawbar Assembly Turntable Trailer Drawbar with certified 40 mm towing eye, mechanically adjustable in length by 6 x 100 mm increments and lockable (Drawbar length 1,700 – 2,300 mm) Axles + Suspension BPW drum brake axles with 10 t axle load each, slack adjusters. Continuous axle brake test up to 105 km/h. Rear axle can be removed manually. To do so, release air locking mechanism, lower the rear section to the ground, disconnect hydraulic hoses from rear section, insert the transport bar into a rear socket, and by gently pushing down and simultaneously pulling backwards, release rear section (parking brake released). After loading/unloading, move rear section into position and hook up to mark. Then raise rear section to driving height and connect hydraulic hoses. Confirm bolt locking (visual inspection if bolt snaps in) and check rear function. Air suspension with lift & lower valve. Wheels and Tires 235/75 R 17.5, from leading manufacturers, steel rims in twin arrangement, factory silver. Guodpfei Ri N Ajx Afwsb Braking System 2-line compressed air brake system, spring-loaded parking brake, 2 fool-proof coupling heads at front with connection lines to tractor, EBS, electronic brake system with EBS plug at front with connection cable. Attention: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrics 24 volt, multi-chamber lights, yellow LED side marker lights, 2 white position lights front, 2 white/red lane control lights rear, revolving beacon with bracket, powered via parking light (removable), 2 pairs of warning boards double LED illuminated and extendable up to 3,300 mm, removable with plug, 2 x 7-pin fool-proof plugs at front with connecting cable, 1 x 7-pin agricultural plug, voltage converter 12/24 volt (for electrics only, not for ABS/EBS) Floor Steel/aluminum checker plate floor on cranked section, between longitudinal and cross beams with perforated cover plates. Axle cover not drive-over, widening to 3,000 or 3,300 mm possible. Operating Instructions Note! For 10,000 kg axle load, a special permit is required. Permit must be applied for separately in each federal state; the legislator is not obliged to grant approval for 20 t GVW. Customer’s risk. Special permit required if total train length exceeds 18,750 mm. Observe country-specific registration regulations. The stated gross weight is technically possible; depending on the cargo, the gross weight may not be achievable in compliance with permissible axle, support, and fifth wheel loads. Observe BO-circle!!! Registration / License Plates Registration country: Germany, with Dekra inspection and report (per §13 EC-FGV), prepared for single-line license plate holder, ECE-70-compliant warning board, contour marking with reflective strips per ECE R 048 Paintwork Front frame hot-dip galvanized incl. passivation, rear frame RAL9006 silver, drawbar KTL black Attention: Archive images!

Stanje: novo, številka stroja/vozila: f8fb99947a1c19bc4d63549ff, lastna masa: 6 kg, največja dovoljena obremenitev: 17 kg, skupna masa: 24 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Rear foldable support 2 wheel chocks with holders Side underrun protection in aluminium Full-width rear mudflap Half-shell mudguards on the 1st axle with anti-spray mudflaps; anti-spray mudflaps behind 2nd and 3rd axles 1 plastic toolbox with shelf, dimensions: width 620 mm, height 360 mm, depth 440 mm, lockable with padlock (padlock not included) Extendable width up to 3,000 mm (not at rear slope) (track width of machines or vehicles to be transported must not exceed external frame width of 2,550 mm) Central storage compartment for timber planks on the loading platform 70 mm timber planks for widening to 3,000 mm Tie-down eyes for low-loader: Guedji Riwfjpfx Afwsb 1 pair of flush-mounted ring lashing eyes at the front on the swan neck, each rated at 5t 7 pairs of lashing mushroom pins, recessed on top and sides of outer frame, each rated at 10t 1x front on swan neck 6x in low bed area First lashing eye 250 mm from the front and last max. 250 mm from the rear, distance between lashing eyes not more than 1,100 mm 5 pairs of stake pockets recessed in the outer frame, internal dimensions 70 x 40 mm (convertible to 5t ring lashing eyes, not included) 2 additional pairs of foldable lashing eyes, each rated at 10t 1x on swan neck (protruding) 1x behind the last axle, recessed in the floor Drawbar assembly for turntable trailer: Drawbar with certified 40 mm towing eye Axles & Suspension SAF drum brake axles Axle/chassis laser alignment to reduce tyre wear and fuel consumption Parabolic springs with maintenance-free steel-rubber bushings and mechanical axle load equalisation (rocker compensation) Wheels and Tyres 235/75 R 17.5 Manufacturer's choice, with M&S marking Steel rims in twin arrangement, factory silver finish Braking System 2-line compressed air braking system Spring-actuated parking brake 2 foolproof coupling heads at the front, with connecting lines to the towing vehicle ABS and ALB, with ABS socket at the front and connecting cable Brand: Wabco or Knorr Note: The trailer may only be towed by vehicles that ensure the proper functioning of the ABS! Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane departure lights at the rear 2x 7-pin foolproof plugs at the front with connecting cable 1 LED beacon with bracket, switched via parking lights (lamp removable) 2 pairs of warning boards, double LED illuminated and extendable to 3,000 mm Floor Front swan neck with steel chequer plate covering Storage box recessed in the approach slope to the swan neck Then 70 mm softwood flooring, in wheel arch area with steel chequer plate Rear slope with 70 mm softwood flooring Low-bed area incl. rear slope 6,500 mm Loading Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Additional ramp safety device, foldable at the bottom (prevents lateral displacement of ramps, not in combination with laterally hydraulic ramp adjustment) Wooden covering Spring-assisted lifting support Operating Instructions At 10,000 kg axle load, a special permit is required, only indivisible loads allowed! The specified total weight is technically possible, but depending on the cargo, the total weight may not be achievable while complying with the permissible axle, support, and king pin loads (poor handling or tracking may result from incorrect load distribution) Country of Registration / Pla

Stanje: novo, številka stroja/vozila: f79a9f15e7131d57a512793ab, lastna masa: 8.900 kg, največja dovoljena obremenitev: 15.100 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low-bed Trailer Steel welded construction Turntable with heavy-duty ball race Foldable rear supports 2 wheel chocks with holders Side underrun protection, aluminium Rear spray guards across the full width Quarter fender before 1st axle Extendable outriggers up to 3,000 mm (not in the rear slope area) (Note: The track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Central storage compartment for timber planks on the loading area 70 mm timber planks for extension to 3,000 mm Lashing points Low-bed 1 pair of lashing rings on gooseneck, each rated at 5 t 9 pairs of lashing mushrooms, flush-mounted on the top and side in the outer frame, each rated at 10 t 2 x front on gooseneck 7 x in the low-bed 6 pairs of lashing holes in the outer frame of the low-bed, each rated at 5 t (for attaching tie-down straps) Drawbar System Turntable trailer Drawbar with certified 50 mm towing eye Axles & Suspension SAF drum brake axles Laser-aligned axles/chassis to reduce tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mount and mechanical axle load compensation (rocker balance) front and rear Wheels and Tyres 235/75 R 17.5 Manufacturer's choice Steel rims, twin arrangement, factory silver Brake System 2-line air brake system Spring-loaded parking brake 2 swap-proof coupling heads at the front with connection lines to towing vehicle ABS and ALS, with ABS connector at the front and connection cable Attention: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrics 24 Volt, multi-chamber lights, side amber LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 1 LED beacon with holder, switchable by parking light (removable) 2 pairs of warning boards, double LED illuminated and extendable up to 3,000 mm 2 x 7-pin swap-proof plugs at the front, with connecting cable Floor Gooseneck at front with steel/chequer plate covering Thereafter 70 mm softwood floor, wheel arch area with steel/chequer plate covering Rear slope with 70 mm softwood floor Access Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Wood plated Hydraulic activation via auxiliary drive on tractor unit with throttle, operation on front left side Hydraulic connection with SVK connector NW 10/3, including connection hose Operating Instructions A special permit is required for an axle load of 10,000 kg; only indivisible loads possible!!! The specified gross weight is technically possible; depending on the freight, the permissible gross weight may not be achieved while respecting axle, support and kingpin loads. (Poor driving and trailing behaviour possible due to incorrect load distribution) Registration Country / Plates Country of registration: Germany With Dekra inspection and report (according to §13 EC-FGV) 24/7 Service Hotline Included Prepared for double-line number plate holder Contour marking with reflective strips according to ECE R 048, white on sides, red at rear Paintwork Frame DB 7350 Nova Grey 10-year warranty against rust-through Drawbar galvanised or black, at manufacturer’s choice Access ramps hot-dip galvanised Gusdoi Ri Izopfx Afweb

Stanje: rabljeno, prva registracija: 11/2006, Leto izdelave: 2006, MÜLLER - MITTELTAL T4 Kompakt Vrtljiva prikolica - Nizkopodna prikolica z zračno vzmetenimi in jamskimi kolesi - 4 x zračno vzmetene GIGANT - osi - zračno vzmetenje - 4 x kolesne jame - mehanske nakladalne rampe - 2 zadnja podporna noga, zložljiva - izvlečne opozorilne table - ABS - MICHELIN pnevmatike: 235/75 R 17.5 - težka izvedba: 40.000 kg skupne mase - lastna teža: 8.400 kg - skupna dolžina: 11.750 mm - vlečna zanka: 50 mm Posebej primerna za prevoz strojev za rezanje apna! - nemška prikolica Guodpfx Aewmpbdjfweb - Tehnični pregled / tehnični preizkus možen na zahtevo in za doplačilo! Pridržujemo si pravico do napak in vmesne prodaje!

Stanje: rabljeno, številka stroja/vozila: 110, lastna masa: 8.320 kg, največja dovoljena obremenitev: 31.680 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2008, dolžina tovornega prostora: 10.300 mm, širina tovornega prostora: 2.550 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 r17,5, medosna razdalja: 6.500 mm, barva: modra, Oprema: ABS, * Drum brake * 4 axles * Wheelbase 6,500 mm * Hydraulic ramp length 2,850 mm – width 650 mm * Loading edge height 920 mm Guedpfx Ajlpav Ujfweb * Extendable to 3 m Subject to errors and omissions

Stanje: rabljeno, Leto izdelave: 2014, Country of manufacture: NL Please contact Theo Lelie for further information. Gjdpfx Afsyrtnqjwjub

Stanje: rabljeno, Leto izdelave: 2009, Country of manufacture: NL Please contact Theo Lelie for further information. Gujdjyrtm Tjpfx Afwjb

Stanje: novo, konfiguracija osi: 2 osi, Leto izdelave: 2021, Oprema: ABS, Technical Data for EBERT TLS 43 ATV Special Low Loader: Permissible fifth-wheel load: 19,000 kg; Permissible axle load: 24,000 kg; Gross vehicle weight: 43,000 kg; Unladen weight (DIN approx.): 12,500 kg; Low-bed length (internal): approx. 6,650 mm + 4,000 mm; Axle table length: 2,700 mm; Overall width: 2,550 mm; Loading height/low bed: approx. 200 mm – 350 mm; Sliding table length: 500 mm; Low-bed width extension to: 3,050 mm; Low-bed telescoping by: 4,000 mm; B-dimension: 12,000 mm; Entire vehicle flame-spray galvanized, with epoxy primer and 2K finish; Oversize warning signs front and rear with red/white panels. Wheels: 9 x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F Guedpfxoyfvwbo Afweb Steering: TRIDEC DLS with Tritronic Axles: 12,000 kg – DLS independent wheel suspension, hydraulic steering and suspension Front raised platform: - Doors in the corners left and right, accessible from outside - Storage box with lid behind the bulkhead, height 600mm, width 2,480 mm, depth 7,500 mm - Spare wheel on the raised platform, right behind the partition - Staircase on the right side for access from low bed to front raised platform - Hydraulic coupling for decoupling on left side – 6-way Multi-Faster coupling - 6 lashing points 3,000 kg spec. outside on the raised platform (recessed lashing rings) - 2 lashing points 5,000 kg spec. on top of the longitudinal beams (rearward) Low bed: - Climbing aids at the boom – extendable - Low bed telescopic by 4,000 mm, lockable every 500 mm - With sliding table, lockable every 250 mm - 28 lashing points 10,000 kg spec. outside in external frame - 24 stake sleeves 90x90 mm, evenly distributed for low-bed extension to 3,050 mm - 50 mm hardwood planks placed between extension tubes, 10 mm projection Rear raised platform: - Front end angled and perforated, for retrofitting ramps, galvanized through adapters - Ramp intake profiles (Altec) – C rails at the rear - 6 lashing points 10,000 kg spec. outside on rear raised platform - 6 lashing points 5,000 kg spec. in excavator well - 8 lashing points 5,000 kg spec. for oversize loads on external frame - Closure of excavator well front and rear with wooden floorboard (insertable) Electrics: - Use NATO coiled cable, power supplied by towing vehicle - Rotating beacon central at rear - Side marker lights in LED design - Standard upright rear light assembly (LC5) - Work lamp on raised platform for illuminating low bed - Decoupling: safety sensor and pressure switch for suspension Air: - Aluminium air tanks 60 l (2x 10 l, 2x 20 l) - TEBS modulator - Extension locks left and right (valve on side of rear raised platform) - Double-release valve Hydraulics: - Hydraulic system on raised platform for steering, suspension, and detachable gooseneck Accessories: - 2 sets of 4 wooden planks as supports for low-bed extension and sliding table - 2 chocks for decoupling - 4 wheel chocks Upon request, we can provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Ebert (Tel. ...) will be happy to assist you. Further information available on our website. Subject to errors and prior sale! New TÜV, Rental possible GVW: 43,000 kg Contact Tobias Ebert for further information.

Stanje: rabljeno, Leto izdelave: 2006, Oprema: ABS, Goldhofer STZ-H6-57/80A Telescopic Low Loader for Wagon Transport Approval                    Technical 1 Speed:                80 km/h                65 km/h Fifth Wheel Load:      23,000 kg           26,000 kg Rear Axle Load:        10,000 kg           11,000 kg Gross Weight:          83,000 kg           92,000 kg Payload:                52,500 kg           61,500 kg Unladen Weight (without equipment): 30,500 kg Gooseneck: Length: 4,000 mm Width: 2,480 mm Construction Height: 235 mm Coupling Height: 1,350 mm Front DLR: 1,420 mm Rear DLR: 2,700 mm King pin: 3.5 inches Chamfer: 10 degrees Front Corners: Beveled 45 degrees Flooring: Spruce 50 mm Landing Legs: Mechanical Width with side walls: 2,550 mm Hydraulic STZ gooseneck with external beams, hydraulically liftable and lowerable With mechanical drop tube supports and hydraulic support cylinders Hydromechanical forced steering (2-circuit steering) in a flat design (construction height 235 mm) with adjustable guide elements and THP steering cylinders. Loading Platform: Type: Platform Liftable: No Length: 13,000 mm Width: 3,000 mm Flooring: Sheet/Spruce 50 mm Wheel recesses: No Extensions: No Extendable: Single-telescopic Length 1: 10,000 mm Loading Heights (laden): Loading height 1: 815 mm Loading platform extendable, implemented as an outer and inner tube construction, with a fixed platform section at the front, 1,070 mm long. Integrated pin-eye coupling in the fixed platform section for coupling deck bridge extension beams; our welded Vkt. rails serve as running rails for track gauges 1,000 mm (track width 1,015 mm) and 1,435 mm (track width 1,450 mm). Locking of the extension stages by spring-loaded cylinders and conical sleeves Platform height at the center frame tube (outer tube) approx. 815 mm (+/- 130 mm) Platform height at the embedded rail elements approx. 790 mm (+/- 130 mm) Rear Undercarriage: Chassis Type: Standard Loaded loading height: 815 mm Width: 3,000 mm Wheelbase: 1,360 mm Flooring: Sheet Extensions: No Wheel recesses: No Excavator recess: No Axles: Number of axles: 6 Lift axle: see accessories Axle type: Drop-arm stub axle Axle equalization: Hydraulic Axle make: BPW/Eco Operating positions: 1 Axle lift (1) +/-: 130/130 mm Axle lift (2) +/-: 0/0 mm Raise/lower valve: Yes 1st axle can be pneumatically lifted with lift airbag Steering: Number of steering axles: 6 Steering axle arrangement: all steered Max steering angle: 45° Steering type: Hydr. 2-circuit Tyres: Dimension: 235/75 R 17.5 143/141 J Tyre type: Twin Rim type: Disc Hub centering: Centered Gujdeyfvf Sspfx Afweb Brake Code: Compliant with EU regulations: Yes AGS: Yes ALB: Yes ABS: Yes With ABS del: No Parking brake: Spring-applied EBS: No ECAS: No Note: Brake calculation No.: GH 4324S Chassis Note: Steering designed for the extended mode with greater steering angle of the front axles Open wheel cutouts above the wheels with narrow cross members between (ALU covers see accessories) Control elements protected on the left in the direction of travel...

Stanje: novo, konfiguracija osi: 3 osi, Leto izdelave: 2022, Oprema: ABS, Technical specifications for EBERT TLS 43 ATV Special Low Loader: - Permissible kingpin load: 19,000 kg - Permissible axle load: 36,000 kg - Permissible gross weight: 55,000 kg - Unladen weight (DIN): approx. 15,500 kg - Low-bed loading length (internal): approx. 6,650 mm + 4,000 mm - Axle table length: 3,550 mm - External width: 2,550 mm - Loading edge/low-bed height: approx. 200 mm - 350 mm, sliding table length: 500 mm - Low-bed width extension to: 3,050 mm - Low-bed telescoping extension: 4,000 mm - B-dimension: 13,300 mm - Entire vehicle flame-sprayed galvanized, with epoxy primer and 2K paint finish - Oversize load signage at front and rear with red/white warning boards Wheels: - 13 x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F Steering: - TRIDEC DLS with Tritronic Axles: - 12,000 kg – DLS single wheel suspension, hydraulically steered and hydraulically suspended Front high-bed: - Side walls 600 mm high - Angled front corners at the high-bed - Doors in the front corners accessible from the outside - Lockable storage box with lid behind the front bulkhead, height 600 mm, width 2,480 mm, depth 7,500 mm - Spare wheel mounted on the high-bed, behind the partition wall on the right - Staircase on the right side to access the front high-bed from the low-bed - Hydraulic coupling for uncoupling on the left, 6-fold Multi-Faster coupling - 6 lashing points, 3,000 kg rating, external on high-bed (drop-down lashing rings) - 2 lashing points, 5,000 kg rating, on top of the longitudinal members (rearward) Low-bed: - Climbing aids on the boom – extendable - External frame thickness: 8 mm - Low-bed telescoping by 4,000 mm, lockable every 500 mm - With sliding table, lockable every 250 mm - 28 lashing points, 10,000 kg rating, external in the outer frame - 24 plug-in stakes 90 x 90, evenly distributed for extending the low-bed to 3,050 mm width - 50 mm hardwood planks inserted between the extension tubes, 10 mm overhang Rear high-bed: - Rear high-bed sloped and perforated for later fitting of ramp mounting profiles using galvanized adapters - At the rear: ramp mounting profiles (Altec) – C rails Gedjyfu N Aspfx Afwoub - 8 lashing points, 10,000 kg rating, external on high-bed - 6 lashing points, 5,000 kg rating, in the excavator trough - 10 lashing points, 5,000 kg rating, for oversize load in external frame - Closure of excavator trough front and rear with removable wooden floor plate Electrics: - NATO spiral cable connection, power supplied by towing vehicle - Central amber beacon at rear - LED side marker lights - Standard vertical rear lights (LC5) - Work light on high-bed for illuminated low-bed area - Oversize load signage at front and rear, uncoupling control, safety sensor, and suspension pressure switch Air system: - 80 l aluminium air reservoir - TEBS modulator - Extension locking left and right (valve on side at rear high-bed) - Double release valve Hydraulics: - Hydraulic system on high-bed for steering, suspension, and detachable gooseneck Accessories: - 2 x 4 hardwood planks for low-bed extension and intermediate table support - 2 safety wedges for uncoupling - 4 wheel chocks Upon request, we can provide you with a leasing or financing offer. Mr. Ebert (Tel. ...) will be happy to assist you. More information is available on our homepage. Subject to errors and prior sale.

Stanje: rabljeno, konfiguracija osi: 2 osi, Leto izdelave: 2009, Oprema: ABS, = More options and equipment = - EBS - Electronic braking system - Rear air suspension - Front air suspension = Notes = For inquiries about the vehicle, Mr. Seidel will be pleased to assist you (by phone). Dinkel DSAFA 36000 inclined loader Additional rear vehicle spotlights, SAF axles, Wabco ABS, spring-loaded brakes, drum brakes, both axles steered, cargo area dimensions L 9.68 m x W 2.54 m / above the fifth wheel plate L 3.14 m x W 2.54 m, tire tread: 1st axle 10-12 mm, 2nd axle 11 mm, permitted total weight: 36,000 kg, unladen weight: 11,750 kg, payload: 24,250 kg. Upon request we can provide you with a leasing or financing offer. Mr. Seidel (phone) is at your service. You can find more information on our homepage. ... Subject to errors, changes and prior sale! ... Steering axle Gujdjyfr Hfspfx Afwob = More information = Unladen weight: 11,750 kg Payload: 24,250 kg gross vehicle weight: 36,000 kg Outer dimensions: 0x2550x2800 Please contact Tobias Ebert for more information.

Stanje: rabljeno, Leto izdelave: 2019, For inquiries about the vehicle, Mr. Seidel will be happy to assist you (by phone). Ressenig SATL2-400.1 Telescopic Low Loader for Machines Lightly used articulated low loader – telescopic, equipped with 2 hydraulically steered 12-ton axle lines Gusdpfx Afsyfrxnowob Manufacturer: Ressenig (Austria) • Lower deck length: approx. 5,500 mm retracted, approx. 8,500 mm extended (telescoped) • First registration: 05/2019 • Permissible total weight: 42,000 kg • Fifth-wheel load: 18,000 kg • Rear axle load: 24,000 kg • Overall length: approx. 12,860 mm retracted, approx. 15,860 mm extended • Unladen weight: 13,180 kg • Payload: 28,820 kg • Width: 2,550 mm • Axles: DL-S axle lines, 12 tons each • Tridec independent suspension, hydraulically suspended and steered • Radio remote control for steering and air suspension • Tyres: 245/70 R 17.5 • Braking system: BBA air brake, EBS, spring-loaded brakes on both axles • Lowbed: telescopable by up to 3 meters, from 5.50 m to 8.50 m • Ramps: electro-hydraulic Other features: • Yellow revolving beacon • Spare wheel • Aluminium bridge inserts for use in the telescoped lowbed • Red/white extension boards for transporting oversize loads On request, we can provide you with a leasing or financing offer. Mr. Seidel (by phone) will be happy to assist you. You can find more information on our homepage. ... Subject to errors, prior sale, and changes! = Further Information = Please contact Tobias Ebert for further information.

Stanje: rabljeno, konfiguracija osi: 2 osi, Leto izdelave: 2024, Oprema: ABS, Za vprašanja glede vozila vam je na voljo gospod Seidel (po telefonu). Wörmann BauTL 105 55/200 nizkopodni priklopnik SAE-SMB osi, bobnaste zavore, Knorr ABS, zračna vzmetenja, vlečna zanka 40 mm, Duomatik, dimenzije tovornega prostora: dolžina 5.600 mm, širina 1.990 mm, višina 400 mm, profil pnevmatik: 1. os 14 mm, 2. os 13 mm Na željo vam pripravimo ponudbo za leasing ali financiranje. Gospod Seidel (tel.) vam z veseljem pomaga. Več informacij najdete na naši spletni strani. Guodpoyfqa Dsfx Afwob ... Pridržujemo si pravico do napak, sprememb in vmesne prodaje!!! - = Dodatne informacije = Lastna masa: 2.700 kg Nosilnost: 7.800 kg Skupna dovoljena masa: 10.500 kg Zunanje mere: 0x2550x3200 Za več informacij se obrnite na gospoda Tobiasa Eberta.

Stanje: novo, konfiguracija osi: 2 osi, Leto izdelave: 2021, Oprema: ABS, Technical data for EBERT TLS 43 ST Special Low Loader: - Permissible kingpin load: 19,000 kg - Permissible axle load: 24,000 kg Gujdsyfp Aqepfx Afweb - Gross vehicle weight rating (GVWR): 43,000 kg - Payload: approx. 32,200 kg - Low-bed length: 9,350 mm - Axle platform length: 2,700 mm - Overall width: 2,550 mm - Loading edge/low-bed height: approx. 200 mm – 350 mm - Oversize warning signs at front and rear with red/white panels - Tyres: 245/70 R 17.5 Steering system: TRIDEC Axles: 12,000 kg Gigant Axles, hydraulic steering Electrics: - Use of NATO spiral cable, power supplied by the towing vehicle - Central warning beacon at the rear - Lateral LED marker lights - Standard vertical rear lights (LC5) Hydraulics: - Hydraulic system for steering mounted on the gooseneck Upon request, we can offer you a leasing or financing solution through Mercedes-Benz Bank. Mr. Ebert (Tel.) will be happy to assist you. Further information is available on our homepage. Subject to errors and prior sale! New general inspection, rental possible = Further information = GVWR: 43,000 kg Please contact Tobias Ebert for more details.

Stanje: rabljeno, številka stroja/vozila: 39500, lastna masa: 8.250 kg, največja dovoljena obremenitev: 31.750 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/1995, velikost pnevmatike: 235/75 r17,5 zwilling, Leto izdelave: 1995, Further information Main and outer frame made of high-strength double-T sections, grade ST 52.3, quadruple longitudinal profiling, with high-webbed front and rear cross-members as well as transverse braces; frame behind the bogie passage features a gently sloping stepped offset and rear loading bevel, 0.8 m long; lowest possible floor height achieved by recessed wheel wells above the rear wheels; leading edges of the bogie platform beveled at 45 degrees. Two recessed UVV lashing rings each on the bogie platform and loading bevel for attaching securing devices. Rear end fitted with wide supports for a ramp shaft with six-fold bearings. Lateral side protection fitted with an EC-compliant guard rail, wheel chocks with clamp lock. Low-maintenance inclined roller bearing axles with automatic linkage adjusters, two-line pneumatic braking system in accordance with EC regulations, and parking brake. Bogie and drawbar: Constructed from double-T sections in welded design with ball-bearing turntable; standard drawbar length 1,500 mm, with 8 eyelets (50 mm diameter each), drawbar support with threaded spindle as height adjustment device. Vehicle is not fitted with axle compensation! 24 volts, 2 exchange-proof 7-pin connection cables, large rectangular four-chamber lights including rear fog and reversing lights, front distribution box, rear outline marker lights, side marker reflectors, and holder for single-line license plate. Undercarriage made of 40 mm thick, pressure-impregnated pine. Low-loader platform and loading bevel with cross-laid top flooring, 30 mm thick, running lengthwise. Total floor thickness 70 mm. Bogie platform with longitudinal single-layer flooring and recessed open tool box, size L 700 x W 800 x H 180 mm. Ramps: Welded construction with trough plate, transverse braces, longitudinally laid wooden overlay, 50 mm thick; ramp tips reinforced; ramp holding rods with turnbuckle and safety catch; ramps laterally adjustable by 470 mm each, with perforated rail and sliding tube; ramp shaft made of bright steel, articulated spring lifters with external and internal springs for easy one-person operation, with automatic ground supports. Guedpei Rixgefx Afwjb Shot-blasted with steel granulate, zinc phosphate-primed, painted in a single acrylic RAL color of choice; wheels silver. Available in traffic, light, and metallic colors as well as two-tone paint finishes; wood surface is stained.

Stanje: novo, številka stroja/vozila: dc46d2e1cd272305b99fb3160, lastna masa: 9.800 kg, največja dovoljena obremenitev: 31.200 kg, skupna masa: 41.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Vehicle consisting of: Chassis low-bed semi-trailer Steel welded construction, kingpin plate with replaceable double kingpin and two kingpin positions 24-ton, 2-speed landing gear, single-sided operation, straight lower section, without thrust compensation Foldable rear support 2 wheel chocks with holders Gujdpfx Aei Ri Hcjfweb Side underrun protection, aluminum Quarter mudguards in front of and behind the axle assembly 1st pair of wheel recesses embedded in the low-bed drive lane area after the gooseneck, tapered for entry. Lower length approx. 1,600 mm, recess depth approx. 260 mm. Note! Frame in the main beam area is 260 mm higher than the wheel recess. 2nd pair of wheel recesses between axles A and B. Lower length approx. 350 mm, depth approx. 260 mm. Note! Frame in the main beam area is 260 mm higher than the wheel recess. If wheel loaders are to be transported and the total height needs to be checked, please provide technical data sheets of the wheel loader types with exact information (if total height is exceeded -> customer responsibility, approval required), (depending on ground clearance under the machines, inserts in the wheel recesses may be required by the customer) Wheel recess covers extendable from the main frame, with wooden inserts. Extensions extendable to 3,000 mm (not in the rear bevel and not in the lower wheel recesses). (The track width of construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm.) Storage compartment for wooden planks on the gooseneck, crosswise at the front 70 mm planks for extension to 3,000 mm Lashing eyes low-bed trailer 2 pairs of ring lashing eyes, each 5t at the front on the gooseneck 11 pairs of lashing mushrooms recessed at the top and side in the external frame, each 10t 2x on gooseneck, 9x distributed on low-bed platform; first lashing point 250 mm from the front and last at max. 250 mm from the rear, distance between lashing points no greater than 1,100 mm 8 pairs of stake pockets recessed in the external frame, internal dimensions 70 x 40 mm, or instead of stake pockets, 5t ring lashing eyes recessed in the floor Axles & Suspension SAF drum brake axles Axles/chassis laser-measured to reduce tire wear and fuel consumption Air suspension Wheels and tires 235 / 75 R 17.5 as per manufacturer's choice Steel rims in twin arrangement, factory silver Brake system 2-line compressed air braking system Spring-loaded parking brake EBS, electronic braking system with EBS socket at the front, without connection cable Attention: The trailer may only be towed by tractors that ensure the effectiveness of ABS! 2 non-interchangeable coupling heads at the front, without connecting line with lift & lower valve Axle load detection via EBS CAN bus signal, for display in the driver's cab (truck must be pre-equipped accordingly, not installed on truck; not a calibrated scale) Vehicle stability control system Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane mark lights at the rear 2 x 7-pin, non-interchangeable sockets at the front, without connection cable 1 x LED beacon with holder, switched via parking light (lamp removable) 2 pairs of warning panels, double LED illuminated and extendable to 3,000 mm, removable with plug Floor Gooseneck with steel/chequer plate covering Storage box embedded in the sloped transition to gooseneck Then with 70 mm softwood floor; in the lower wheel recesses and w

Stanje: novo, številka stroja/vozila: e77e603e96d0ea4194a7f7661, lastna masa: 3.000 kg, največja dovoljena obremenitev: 8.800 kg, skupna masa: 11.800 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235 / 75 r 17,5, Further information Chassis central axle trailer Fine-grain steel welded construction 5 pairs of lashing eyes screwed to the floor/outer frame, each rated at 3 tonnes 2 additional pairs of lashing eyes screwed to the floor, each rated at 5 tonnes in the corners Support leg with gearbox at the front Folding rear support 2 wheel chocks with holder Galvanised steel underrun protection Rear spray flaps across full width Quarter shell mudguards Central axle trailer drawbar system Drawbar with certified 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 250 mm Axles & suspension GFA or BPW drum brake axles Laser-measured axle/chassis alignment to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17.5 Manufacturer’s choice Factory silver steel rims Braking system 2-line compressed air braking system Hand spindle parking brake Integral air reservoir 2 fail-safe coupling heads at the front with connecting lines to the towing vehicle, ABS and ALB, with ABS connector at the front, including connection cable Attention: The trailer may only be towed by vehicles that ensure proper functioning of the ABS system! Electrics 24 volts, multi-chamber tail lights, side yellow LED lighting 2 white position lights at the front 2 white/red marker lights at the rear Two 7-pin fail-safe plugs at the front, with connecting cable, Floor Steel/chequer plate floor for high point load capacity Note: Slight floor waviness possible due to welding distortion! Platform length approx. 5,200 mm Front wall / corner stanchions 25 mm aluminium hollow profile, 320 mm high, front corner stanchions in steel volume design Side panels 25 mm aluminium hollow profile, 320 mm high, foldable and removable, subdivided by 1 pair of plug-in centre stanchions Rear wall / rear corner stanchions 1 pair of steel stanchions fixed to the frame with bracket for ramp locking, loading width approx. 2,430 mm Ramps 2 steel ramps, 3,100 mm long, 510 mm wide, split lengthwise, laterally adjustable, with handle on ramps wooden inlay with gas spring for one-man operation Operating instructions Gjdpfx Afji Riv Tewsub The specified total weight is technically possible; depending on the load, the gross weight may not be achievable due to permissible axle/support/kingpin loads. (Poor handling and trailing stability may result from improper load distribution) Country of registration/plates Country of registration: Germany with Dekra inspection and certificate (per §13 EC-FGV) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective tape to ECE R 048, white on sides and red at rear Paintwork Frame DB 7350 Nova Grey, 10 years warranty against rust-through Front/rear panels aluminium anodised, centre stanchion DB 7350 Nova Grey Ramps hot-dip galvanised Note: Archive images!

Stanje: novo, številka stroja/vozila: 2428b2018baf171e60fef6740, lastna masa: 8.900 kg, največja dovoljena obremenitev: 32.100 kg, skupna masa: 41.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further information Chassis for Low-bed Semi-Trailer Steel welded construction, king pin mounting plate with interchangeable 2 kingpins and 2 kingpin positions, 24 t, 2-speed landing gear, single-sided operation, with straight lower frame, without compensation for extension Rear folding support 2 wheel chocks with holders Side underrun protection, aluminium Full-width rear spray flap Fenders in front of the 1st axle and behind each axle, with anti-spray as per EU regulations Extendable outriggers to 3,000 mm (not at the rear incline) (track width of construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Central storage compartment for timber planks on the loading area 70 mm timber planks for extension to 3,000 mm Tie-down points, low-loader 2 pairs of ring lashing eyes, each 5 t, at the front on the gooseneck 11 pairs of lashing mushrooms, recessed into the upper and side outer frame, each 10 t 2 x on the gooseneck 9 x distributed in the low-bed area First lashing eye 250 mm from front, and last max. 250 mm from rear; spacing between lashing eyes no greater than 1,100 mm 8 pairs of stake pockets embedded in the outer frame, inner dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) Axles & Suspension SAF drum brake axles Gsdpfx Aji Ri E Rsfweub Axle/chassis laser-aligned to reduce tyre wear and fuel consumption Air suspension Wheels and Tyres 235 / 75 R 17.5, make per manufacturer's choice Steel twin wheels in factory silver Braking system 2-line compressed air brake system Colour-coded piping layout for easy maintenance Spring-loaded parking brake EBS (Electronic Braking System) with EBS socket at the front, no connection cable Note: This trailer may only be towed by vehicles capable of ensuring the ABS function! 2 mistake-proof coupling heads at the front, no connection line With lift & lower valve Axle load detection via EBS CAN bus for display in cab, compatible truck required, no truck installation (not a certified weighing system) Vehicle stability control system Electrics 24 volts, multi-chamber lights, side LED marker lights (yellow) 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin mistake-proof sockets at the front, no connection cables 1 LED beacon with holder, switched via sidelights (removable beacon) 2 pairs of double LED illuminated warning boards, extendable to 3,000 mm Flooring Gooseneck with steel plate covering Storage box built into the slope to the gooseneck then with 70 mm softwood flooring, in wheel arch area with steel/tread plate covering Rear incline with 70 mm softwood flooring Low-bed area including rear incline: 9,200 mm Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber-covered Hydraulically operated via tractor PTO with restrictor, controls on left side (driver’s side) in front Hydraulic connection with SVK coupling NW 10/3, without hose Operating instructions For axle loads of 10,000 kg, an exceptional permit is required, only indivisible loads permitted!!! Special permit required if 40 t gross combined weight is exceeded! The total weight specified is technically feasible; depending on the load, the total weight may not be achievable while adhering to permissible axle, support, and fifth wheel loads. (Poor handling and tracking possible due to incorrect load distribution) If applying for an exceptional permit for heavy haulage vehicles subject to authorization, an axle load indicator i

Stanje: novo, številka stroja/vozila: 364a8214fd0c4afa2b936c7db, lastna masa: 11.800 kg, največja dovoljena obremenitev: 29.200 kg, skupna masa: 41.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further information Chassis Low-loader Semi-Trailer Steel welded construction, fifth wheel plate with interchangeable 2" kingpin and 2 kingpin positions (not in combination with forced steering) 24 t, 2-speed landing gear, single-side operation, with semi-circular lower part and straight connector plate, with load compensation Foldable rear support Wheel chocks with holders Aluminum side underrun protection Splash guards in front of the first axle and behind each axle, with anti-spray, according to EU standards Stainless steel toolbox, width=600 / height=400 / depth=500 mm, with polished lockable door Lifting table behind gooseneck, approx. 3000 mm long, hydraulically liftable for transition over gooseneck, with mechanical locking in raised position. Operated by remote control Electric winch, 24 volt, 8165 kg pulling force, mounted centrally at the very front of the load area on the gooseneck, installed in stainless steel box with door (subject to technical feasibility, to be checked in detail), operated by remote control, cable length 35 m x approx. 10 mm, with roller rope window and removable guide rollers on the gooseneck and rear incline Lashing eyes low-loader: Gooseneck: 5 pairs of lashing eyes integrated into the outer frame, each 5 t. 2 pairs of lashing eyes in the center, each 5 t. 1 pair of lashing points at the top and outside in the outer frame in the neck incline, each 10 t Deck: 4 pairs of lashing eyes integrated into the outer frame, each 5 t. 4 pairs of lashing eyes in the center, each 5 t. 1 pair of lashing points at the top and outside in the outer frame, each 10 t Lowered bed: 4 pairs of lashing eyes integrated into the outer frame, each 5 t. 5 pairs of lashing eyes in the center, each 5 t. 4 pairs of lashing points at the top and outside in the outer frame, each 10 t Axles & Suspension Guedpei Ri E Usfx Afwsb SAF drum brake axles Axle/chassis laser alignment to reduce tire wear and fuel consumption Last axle self-steering, with automatic reverse lock via reverse light and additional locking function on the vehicle via hand knob Air suspension with raise & lower valve, hold function for lowering & auto reset function Wheels and Tires 235 / 75 R 17.5 by manufacturer’s choice Steel rims in twin arrangement, factory silver Brake system 2-line compressed air brake system Spring-loaded parking brake Vehicle driving stability system Axle load detection via EBS CAN bus signal for display in the driver’s cab (truck must be suitably equipped; not for trucks—no calibrated scale) 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by tractors that ensure the effectiveness of the ABS! Electrics 24 Volt, multifunction lights, yellow LED side lighting 2 white position lights at the front 2 white/red track marker lights at the rear All lights in full LED version (note: Some tractors may show diagnostic errors despite full function) 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connecting cables Additional LED work light at the rear, switched via reverse light LED beacon with bracket, switched via parking light (removable beacon) Pair of warning boards, double LED illuminated and expandable to 3,000 mm, removable with plug Floor Gooseneck covered with Mega Grip serrated grating Low-bed area covered with Mega Grip serrated grating Rear incline covered with Mega Grip serrated grating

Stanje: novo, številka stroja/vozila: df15479123e15bcf265d560e1, lastna masa: 12.800 kg, največja dovoljena obremenitev: 44.200 kg, skupna masa: 57.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis low-bed semi-trailer Steel welded construction, fifth wheel plate with replaceable 2 king pins and 2 king pin positions 24 t, 2-speed landing gear, operated from one side, with straight base, without load equalizer Rear support retractable 2 wheel chocks with holders Aluminum side underrun protection 1 plastic toolbox with shelf, w=620/h=360/d=440 mm, lockable with padlock (lock not included) Extendable widenings to 3,000 mm (not at rear taper) (the track width of machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Compartment for wooden planks on neck, transverse at front Wooden planks 70 mm for widening to 3,000 mm Telescoping Central tube frame made of precisely welded, interlocking telescopic frame sections. Extendable by max. 6,000 mm and lockable every approx. 1,000 mm. Payload/point load is reduced when extended! Locking by mechanical bolt lock with sliding table Tie-down eyes low-bed 2 pairs of ring tie-down eyes (each 5 t) at the front on gooseneck 11 pairs of lashing points recessed at the top and sides in the outer frame (each 10 t) 2x on gooseneck 9x in low-bed area distributed; first tie-down eye 250 mm from front and last max. 250 mm from rear, distance between tie-down eyes not greater than 1,100 mm Godpfx Aoi Ri Hnjfwoub 8 pairs of stake pockets recessed in outer frame, internal 70 x 40 mm (convertible to 5 t ring tie-down eyes, not included) 3 pairs of folding tie-down eyes additionally recessed in low-bed area, each 10 t, 1 at start of low-bed, 1 in front of 1st axle, and 1 behind 3rd axle Axles & Suspension SAF drum brake axles Axles/chassis laser alignment: reduces tire wear and fuel consumption Last 2 axles hydraulically steered, with automatic reverse lock via reversing light and manual lock via hand button on vehicle Air suspension with raise & lower valve Wheels & Tires 235/75 R 17.5 brand Fulda Steel twin wheels, factory silver Brake System 2-line compressed air brake system Spring-loaded parking brake Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the driver’s cab (truck must be prepared accordingly, not installed in vehicle, not certified scale) 2 fail-safe coupling heads at front, without connecting line EBS electronic brake system with EBS socket at front, without connecting cable Note: The trailer may only be towed by tractor vehicles that guarantee the effectiveness of ABS! Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at front 2 white/red lane marker lights at rear 1 LED rotating beacon with holder, switched via parking lights (beacon removable) 2 pairs of warning panels, double LED-illuminated and extendable to 3,000 mm 2 x 7-pin, fail-safe sockets at front, no connecting cable Floor Gooseneck with steel / chequer plate covering Storage box recessed in approach ramp to gooseneck then with 70 mm softwood flooring, in wheel arch area steel / chequer plate covering Rear taper with 70 mm softwood flooring Side walls 25 mm aluminum hollow profile, 400 mm high, plug-in, at front and sides on gooseneck Loading ramps Steel ramps 2,800 mm long, 750 mm wide, laterally shiftable wood-covered Hydraulic via tractor auxiliary drive with throttle Hydraulic connection with SVK coupling NW 10/3, without connecting hoses Operating Instructions An exemption permit is required for 10,000 kg axle load

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 02/2001, skupna dolžina: 13.350 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70R17.5, barva: rdeča, Leto izdelave: 2001, Total length: 1,334 cm + 1,950 cm. Loading bed length: 915 cm + 1,950 cm. Loading height: 100 cm. Gedpeycf Htofx Afwoub = Further information = Axle configuration Tyre size: 245/70R17.5 Brakes: drum brakes Suspension: air suspension Rear axle 1: twin tyres; steered; tyre tread depth left inside: 30%; left outside: 30%; right inside: 30%; right outside: 30% Rear axle 2: twin tyres; steered; tyre tread depth left inside: 50%; left outside: 50%; right inside: 50%; right outside: 50% Rear axle 3: twin tyres; steered; tyre tread depth left inside: 30%; left outside: 30%; right inside: 30%; right outside: 30% Weights Unladen weight: 15,650 kg Payload: 29,350 kg Gross vehicle weight: 45,000 kg Financial information Price: on request Identification Type number: 3 ABSD-48/3 / 3 x EXTENDABLE / 3 = Company information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT). Russian spoken. We strive to provide correct information, but no rights can be derived from the listed texts.

Stanje: zelo dobro (rabljeno), številka stroja/vozila: U59X39BN0N1VS3024, konfiguracija osi: 3 osi, prva registracija: 05/2022, vzmetenje: zrak, stanje pnevmatik: 80 odstotek, barva: drugo, Leto izdelave: 2022, = Druge možnosti in oprema = - Zračno vzmetenje Gedouzhn Ropfx Afweub - Disk zavore = Dodatne informacije = Profil pnevmatik: 80 % Zadnja os 1: dvojna montaža Zadnja os 2: dvojna montaža Zadnja os 3: dvojna montaža

Stanje: novo, lastna masa: 781 kg, največja dovoljena obremenitev: 2.719 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.200 mm, širina tovornega prostora: 1.700 mm, višina nakladalnega prostora: 200 mm, prostornina tovornega prostora: 1,1 m³, barva: srebrn, gradbena višina: 1.970 mm, delovna širina: 2.320 mm, Reverse drive automation, hot-dip galvanization, TracStrap load securing, heavy-duty ramp, extremely robust construction, perforated lashing floor, LED lighting, jockey wheel, bucket storage, * IMMEDIATELY AVAILABLE * incl. TracStrap load securing / heavy-duty ramp / extremely robust construction / perforated lashing floor / LED lighting / jockey wheel / bucket storage TECHNICAL DATA - Make: Brian James - Model: Digger Plant 2 - Vehicle type: Construction machinery trailer - Vehicle condition: New - First registration: none - TÜV / Roadworthiness inspection: 2 years from initial registration - Internal dimensions (LxWxH): 320 x 170 x 20 cm - External dimensions (LxWxH): 512 x 232 x 197 cm - Loading height from floor: 40 cm - Permissible total weight: 3,500 kg - Unladen weight: 781 kg - Payload: 2,719 kg Guodpeu Hrhlofx Afwjb - Chassis: Low loader (wheels positioned beside the platform) - Tyres: 195/60R12C - Suspension: ALKO rubber torsion axle - Jockey wheel: Yes - 100km/h approval: Optional, can be retrofitted DESCRIPTION - Robust steel mudguards with anti-slip perforated profile - Reinforced perforated steel floor, inner sides - Central 18mm phenolic plywood floor, anti-slip and waterproof - Very sturdy welded steel frame - Frame fully hot-dip galvanized by immersion - Chassis fitted with two additional longitudinal beams beneath the load platform - Full-width heavy-duty perforated steel ramp, galvanized, spring-assisted - Robust ACME locking system: closes silently, loading ramps secured in position with safety clamps, rubber bumpers dampen noise - Ultra-low chassis for minimal approach angle - Digger bucket tray - 10x lashing rings on the side board (certified 1000 daN/kg by TÜV) - Freely selectable lashing points for securing in the perforated steel floor - TracStrap Kit (heavy-duty), TÜV-certified load securing system – revolutionary system – top-class securing for tracked vehicles - Ready for departure in the shortest time - Adjustable front chocks forming the basis for form-fit load securing - 2x tie-down straps (LC 5000 daN) for securing over the tracks - Maintenance-free axles and damping systems designed for long journeys and heavy loads - Spare wheel mounted on the side board, easily accessible - Reverse drive automation - ALKO overrun brake system and parking brake - Steel cast coupling head with integrated high-security ALKO lock - Very robust reinforced V-drawbar - 13-pin plug - Complete LED lighting: extremely bright, durable, and reliable - LED marker lights at rear - Reversing spotlight - Integrated rear fog lamp - Rugged rear light protection - Heavy-duty jockey wheel - 5 years chassis warranty Optional accessories available: please enquire! - Digger bucket cage - Lashing straps - Tool box - Winch - and much more New vehicle with warranty and roadworthiness certificate. We will be happy to offer you suitable financing! Descriptions and images are protected by copyright! Over 800 trailers available from stock! We have been your specialist dealer and repair workshop for over 30 years for Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix. Delivery available across Germany for a surcharge. Trailer Centre BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt Errors, omissions, and prior sale reserved.