Nizki nakladalnik

Ebert TLS 43 ATV / Tele / 30,5to Nutzlast

Technical Data for EBERT TLS 43 ATV Special Low Loader:

Permissible fifth-wheel load: 19,000 kg; Permissible axle load: 24,000 kg; Gross vehicle weight: 43,000 kg; Unladen weight (DIN approx.): 12,500 kg; Low-bed length (internal): approx. 6,650 mm + 4,000 mm; Axle table length: 2,700 mm; Overall width: 2,550 mm; Loading height/low bed: approx. 200 mm – 350 mm; Sliding table length: 500 mm; Low-bed width extension to: 3,050 mm; Low-bed telescoping by: 4,000 mm; B-dimension: 12,000 mm; Entire vehicle flame-spray galvanized, with epoxy primer and 2K finish; Oversize warning signs front and rear with red/white panels.
Ppjdjyfvwbopfx Aczol

Wheels: 9 x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F

Steering: TRIDEC DLS with Tritronic

Axles: 12,000 kg – DLS independent wheel suspension, hydraulic steering and suspension

Front raised platform:
- Doors in the corners left and right, accessible from outside
- Storage box with lid behind the bulkhead, height 600mm, width 2,480 mm, depth 7,500 mm
- Spare wheel on the raised platform, right behind the partition
- Staircase on the right side for access from low bed to front raised platform
- Hydraulic coupling for decoupling on left side – 6-way Multi-Faster coupling
- 6 lashing points 3,000 kg spec. outside on the raised platform (recessed lashing rings)
- 2 lashing points 5,000 kg spec. on top of the longitudinal beams (rearward)

Low bed:
- Climbing aids at the boom – extendable
- Low bed telescopic by 4,000 mm, lockable every 500 mm
- With sliding table, lockable every 250 mm
- 28 lashing points 10,000 kg spec. outside in external frame
- 24 stake sleeves 90x90 mm, evenly distributed for low-bed extension to 3,050 mm
- 50 mm hardwood planks placed between extension tubes, 10 mm projection

Rear raised platform:
- Front end angled and perforated, for retrofitting ramps, galvanized through adapters
- Ramp intake profiles (Altec) – C rails at the rear
- 6 lashing points 10,000 kg spec. outside on rear raised platform
- 6 lashing points 5,000 kg spec. in excavator well
- 8 lashing points 5,000 kg spec. for oversize loads on external frame
- Closure of excavator well front and rear with wooden floorboard (insertable)

Electrics:
- Use NATO coiled cable, power supplied by towing vehicle
- Rotating beacon central at rear
- Side marker lights in LED design
- Standard upright rear light assembly (LC5)
- Work lamp on raised platform for illuminating low bed
- Decoupling: safety sensor and pressure switch for suspension

Air:
- Aluminium air tanks 60 l (2x 10 l, 2x 20 l)
- TEBS modulator
- Extension locks left and right (valve on side of rear raised platform)
- Double-release valve

Hydraulics:
- Hydraulic system on raised platform for steering, suspension, and detachable gooseneck

Accessories:
- 2 sets of 4 wooden planks as supports for low-bed extension and sliding table
- 2 chocks for decoupling
- 4 wheel chocks

Upon request, we can provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Ebert (Tel. ...) will be happy to assist you. Further information available on our website. Subject to errors and prior sale!

New TÜV, Rental possible

GVW: 43,000 kg
Contact Tobias Ebert for further information.

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.