Gsw Odvijalnik Za Trakove nakup rabljenega (90.067)

Stanje: rabljeno, Recoiling and decoiling reel for coil material HMS Type BA 1.5-06/80 Machine No. Year of manufacture: 1991 Kodehx R Etepfx Aqgolw Maximum coil weight: 8,000 kg Maximum coil outside diameter: 1,600 mm (with loading saddle) Maximum coil outside diameter: 2,000 mm (without loading saddle) Coil support disc diameter: Ø 1,700 mm Coil inner diameter, expansion range: 460–520 mm Coil width, nominal: max. 630 mm Expanding jaw width: 750 mm Height of reel crown above base plate: 1,500 mm - Reel crown driven by hydraulic motor with gearbox and gearwheel - Pneumatic overrun brake on the reel crown TWINFLEX - Hydraulic service brake - Hydraulic stop brake - Hydraulic expansion of the reel crown, centrally via wedge slider system - Hydraulic hold-down arm with hydraulically driven double pendulum roller - Coil loading saddle with 12 ton lifting capacity and 300 mm stroke - Reel on elevated travel frame with motor-driven cross-travel - Separate hydraulic power unit (also used for additional functions in a strip processing line) - Without electrical control cabinet (alternatively, there is an electrical cabinet which supplied the entire strip processing line) Transport dimensions L x W x H: 3,500 x 1,900 x 2,500 mm Dead weight: approx. 5 tons In good condition – not operational electrically

Stanje: pripravljen za uporabo (rabljen), * Model: spone za transportne trakove * 85 škatel: Nilos SO11 * 37 škatel: Nilos 7/vc * 92 škatle: Comet P15 * 21 škatla: Mato U37/1200 Kedsywmc Hopfx Aqgjlw * 56 škatel: Asgor 4

Stanje: rabljeno, Uncoiler/Re-coiler KEMMERICH / STANGE Type HA 1500 / 500 Serial No. 51673 Year of manufacture: 2023 (unused) Maximum coil weight: 1,500 kg Coil width with entry arms: 500 mm Coil width without entry arms: 670 mm Coil inner diameter: 300 - 370 mm Coil inner diameter with adaptor jaws: approx. 380 - 440 mm Uncoiler entry ring Ø: 2080 mm Maximum coil outer diameter without pressure arm: 2,350 mm Klsdpfx Aqeua Nngegjw Maximum coil outer diameter with pressure arm: 2,200 mm Distance from center of uncoiler hub to base: 1,200 mm Uncoiler shaft / support shaft Ø: 70 mm Rotational speed: approx. 1.5 to 20 rpm Motor power: 1.1 kW Power supply: 400 Volt, 50 Hz - Stepless hub rotation speed via frequency inverter - Loop control / proximity switch for uncoiler STOP - Central expansion via hand crank - Forward and reverse operation - Pneumatic pressure arm with running roller - 4 entry arms, 870 mm - 4 adaptor jaws made of plastic for adjusting the uncoiler hub Space requirements (L x W x H): Weight: 970 kg Very good condition

Leto izdelave: 2018, stanje: pripravljen za uporabo (rabljen), Working width: 707 mm, working height infeed/outfeed: 1220 mm / 1100 mm, operating temperature: 60°C, material: stainless steel, belt material: plastic, belt length and width (lower): 14,000 mm / 820 mm, belt length and width (upper): 8,500 mm / 820 mm, reducer power: 1.5 kW, pump power: 2.2 kW, additional bridge reducer power: 0.55 kW, machine dimensions (L/W/H): approx. 6,750 mm / 1,810 mm / 3,500 mm. Documentation available. On-site inspection is possible. Kodpeu S I Hfsfx Aqgjlw

Leto izdelave: 2006, stanje: pripravljen za uporabo (rabljen), Type of adhesive: PUR adhesive, glue application system: cartridge-based, max. edge thickness: 25mm, max. workpiece thickness: 60mm, feed rate: 16 m/min, min. workpiece length: 140mm, min. workpiece width: 60mm. Includes various spare parts and return conveyor Ligmatec. Documentation available. On-site inspection possible. Kodpfx Ajugmw Eeqgslw

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Edge banding machine Manufacturer: IMA Model: Quadromat 3512 U Year of manufacture: 1999 Edge material: veneer rolls and strips, plastic, solid wood lippings Edge height: 14–50 mm Edge thickness: 0.4–12 mm Speed: 18,000 rpm End trimming unit Ksdpfx Aqsv T R Erjgjlw Milling units Profile scraping knives Buffing unit Flat scraping knives

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Širina prehoda: maks. 150 mm Višina prehoda: maks. 5,0 mm Kedsxg Rxuspfx Aqgjlw Drugo: Primerno za rezanje štancanih rešetk Upravljanje preko bata preše, povratek preko vzmeti

Stanje: novo, Pneumatic Strip Nailer 6512/130 SQ for nails up to 130 mm length Applications: Carpentry, roofing, packaging, interior finishing, prefabricated house construction, timber formwork, battening, crate and pallet construction, fence construction, load securing, etc. Kledpfx Aqovcl Slegow • Sequential trigger • For paper-collated safety strip nails • Eurocode 5 nails according to DIN EN 14592 • User-friendly depth adjustment • Robust and high impact • Optimally sound-dampened and well-balanced Technical data: • Trigger type: Sequential trigger • Air consumption per drive: 5.40 liters • Nail lengths: 90 to 130 mm • Nail diameter: 3.4 – 4.2 mm • Nail type: 34° safety strip nails • Magazine capacity: 75 nails • Weight: 6.60 kg • Dimensions (L x W x H): 470 x 150 x 460 mm The nailer is new and unused. Only minor showroom wear may be present as the tool was on display. You will receive an invoice with VAT shown. Payment: Prepayment by bank transfer – NO PAYPAL! If you have any questions, please feel free to contact us.

Stanje: dober (rabljeno), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AN-No.: 88.04.017 D, 8 pieces of very clean (refurbished) Jakob Müller Frick AG NF42 looms from 1988, 1989, and 1990 from my inventory. The machines run flawlessly and are 100% operational (completely overhauled). 12 shafts, without magazine, with Mütrans, some with Müdata. Kledor Ix Igjpfx Aqgsw 1 unit NF 2/84mm from 1989 for €6,900 Item No.: 88.04.017 D, with Müdata and Mütrans, 16 shafts 3 units NF 2/84mm, completely overhauled, from 1990 at €6,500 each Item No.: 90.01.704 B Item No.: 90.01.755 A Item No.: 90.01.229 A 1 unit NF 2/84mm, completely overhauled, from 1989 for €6,500 Item No.: 89.00.118 D 3 units NF 2/84mm, completely overhauled, from 1988 at €6,500 each Item No.: 88.04.244 A Item No.: 88.02.758 A Item No.: 88.02.758 B The machines come from a curtain tape production line and were originally equipped with a Z compartment. As part of the general overhaul, they have been converted to standard compartments. All tension trees and pressure rollers have been newly vulcanized by Westland. Card rollers in the chain box are new or newly vulcanized. The central lubrication system in the chain case has been optimized by us. All machines have the first shaft free (for heavier reeds) and are fitted with 12 shafts. All machines are fitted with Mütrans II. Individual machines with double-belt take-off (for heavy-duty fabrics) can be delivered upon request. I believe this is possible for 4-5 machines. Finely knurled tension trees can also be installed for 4-5 machines as an option. All needle holders are suitable for double needles. Two additional Mütrans II units can be installed for this purpose upon request. The machines have been rebuilt from scratch. All bearings, shafts, and bushings have been inspected and replaced as necessary. All swing arms have been checked and replaced if required. Installed: - 1st shaft free (spacer block installed) - 2nd and 3rd shaft: swing arm 201 - 4th–6th shaft: swing arm 202 - 7th–9th shaft: swing arm 203 - 10th–12th shaft: swing arm 204 - 13th shaft: swing arm 205 All shaft springs have been checked and replaced where needed. There are no porous, cracked, or defective parts. The electrical system has been checked, the circuit board for thread monitoring has been inspected and, if required, repaired or replaced. The machines are painted in RAL 6021 Müller pale green. All panels are clean and undamaged. The machines are offered without Müdata. Four units are additionally equipped with crawler gears. The machines have been set up and tested. Note: Machines are supplied without oil, yarns, slats, reeds, needles, and chain links. Delivery on Euro pallet, FOB Wuppertal.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Single-sided automatic edge banding machine with jointing unit, hot-melt glue application for straight workpieces, flush trimming unit with VR function, HF milling unit, chain feed, double roller upper pressure, and extendable workpiece support rail. Suitable for ABS and PVC edge banding rolls, as well as fixed lengths from 0.4 to 2.0 mm and workpiece heights from 8 to 50 mm. Feed speed: 5.5 m/min • 2 free spaces for finish units • 5.6" color touch screen • Automatic edge feeding for roll material via rotatable reel table D=600 mm • Two counter-rotating, demand-controlled jointing units with diamond-tipped spiral jointing cutters guarantee clean and tear-free jointing of the workpieces before edge application. Kledpfx Aqjip Uzpjgjw • Teflon-coated glue pot with 1.5 kg capacity, leak-proof with bottom glue reservoir (excess glue is automatically returned to the glue pot), precise glue application via glue roller, separate glue roller temperature adjustable, electronic temperature control with automatic standby function (prevents glue burn-off if the machine remains switched on but is unused for extended periods). (Optional: EVA/PUR glue pot with drainage/cleaning function for quick color change). • Pressure zone consisting of a powered pressure roller operating synchronously with the glue roller, and an adjustable pressure roller with spring tension, ensuring a strong joint between the edge material and the workpiece, adjustable via SIKO display. • Flush trimming unit for front and rear workpiece edges, including VR function (for vertical curves), HF motor 0.27 kW / 12,000 rpm, automatic tracing on the workpiece, with extraction hood • High-frequency combination milling station, 2 powerful 0.27 kW high-frequency motors with HM-WPL special cutters, suitable for radius and chamfer trimming, horizontal and vertical workpiece tracing, unit adjustment with digital counters for different edge types, height adjustment of the upper unit via upper pressure. • 5.6" color touchscreen controls glue temperature settings, automatic temperature reduction when the machine is idle, activation/deactivation of units, and error diagnostics. • LED lighting in the enclosure • Riepe spray systems for anti-adhesive or cleaning agents available as option Optional finishing units (2 free slots): • Radius scraper unit: Slight cutting action removes any milling marks from radius cutters, ensuring a perfect finish. Fine adjustment via digital counter. • Surface scraper unit: Light cutting action removes any glue residues from the glue line on the workpiece surface. • Buffing unit: 2 motors, 0.05 kW, 1,500 rpm, provide a superb finish for ABS and PVC edge materials.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Single-sided automatic edge banding machine with jointing unit, hot-melt adhesive application for straight workpieces (EVA-PUR glue pot with drain function optional), high-frequency cross-cutting station, high-frequency milling unit, chain feed, double pressure roller top pressure, extendable workpiece support rail, and signal lamp for workpiece sequencing. Suitable for ABS, PVC, melamine, and thick wood veneer roll material, as well as fixed lengths from 0.4 – 3.0 mm and workpiece height from 8 – 50 mm. Feed speed: 7.0 m/min. • 2 free spaces for finishing units • 7.0“ color touch screen • Automatic edge feeding for roll material via a rotary turntable D=600 mm • Infeed lineal (400 mm) with support • Two counter-rotating, application-controlled jointing units with diamond-tipped spiral jointing cutters ensure clean and tear-free jointing of the workpieces before edge application. • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leak-proof, with bottom glue reserve (excess glue is automatically fed back into the glue pot), fine adjustable glue application via glue roller, separately adjustable glue roller temperature, electronic temperature control with automatic standby function (prevents glue from burning if machine remains switched on but is unused for a long time). Optional: EVA/PUR glue pot with drain/cleaning function for fast color change Kljdpfxed R U Acs Aqgsw • Pre-cutting shear for roll material up to 3 mm edge thickness. • Pressure zone consisting of a driven pressure roller synchronized with the glue roller and an adjustable pressure roller with spring tension, for perfect edge bonding between edge material and workpiece; pressure zone adjustable with digital counter. • High-frequency cross-cut saw equipped with 0.21 kW HF motor, 12,000 rpm, 2 saw blades, and high-precision linear guides for clean, precise cutting; equipped with extraction hood. • High-frequency combination milling station, 2 powerful 0.27 kW HF motors with carbide-tipped special cutters, suitable for radius and chamfer milling, horizontal and vertical workpiece sensing, unit adjustment equipped with digital counters for different edge types, 2 chip extraction hoods with central extraction nozzles 2 x Ø 100 mm; height adjustment of upper unit via top pressure. • Rotatable control panel with 7.0” color touchscreen controls glue temperature settings, automatic temperature reduction when the machine is not in use, on/off of units, and error diagnostics • LED lighting in the cabin • Riepe spray systems for anti-adhesive or cleaning agents optionally available Optional finishing units (2 free spaces): • Radius scraping unit: Light pulling cut removes possible radius milling marks for a perfect finish. Fine adjustment via digital counter. • Surface scraping unit: Removes glue residues from the workpiece surface at the glue joint with a light pulling cut • Buffing unit: 2 motors, 0.05 kW, 1,500 rpm provide a super-finish for ABS and PVC edge material

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Single-sided automatic edge banding machine with pre-milling unit, hot-melt glue application to straight workpieces (EVA/PUR glue pot with discharge function optional), 2-motor HF end trimming station, HF multifunction milling unit, 2-motor corner copying unit, chain feed, motorized top pressure with encoder and ball-bearing double roller top pressure, extendable workpiece support rail, signal lamp for workpiece feed, integrated section control for contact-free operation of processing functions, and L-Motion control (18 axes). For ABS, PVC, melamine and solid wood veneer roll material, as well as fixed lengths from 0.4 – 3.0/5.0 mm and workpiece height from 10 – 60 mm. • Automatic edge feeding for roll material via rotatable roll table D=800 mm • Infeed table (650 mm) with support • Automatic strip magazine (70 mm capacity) with spiked roller for wood laths. • Two counter-rotating, demand-controlled pre-milling units with diamond-tipped spiral cutters ensure clean and tear-free pre-milling of workpieces before edge banding. Klodpsf Tdwcjfx Aqgow • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leak-proof with bottom glue reservoir (excess glue is automatically returned to the pot), fine dosing glue application by glue roller, separate adjustable glue roller temperature, electronic temperature control with automatic standby function (prevents glue from burning if the machine is unused for extended periods but remains switched on). Optional: EVA/PUR glue pot with discharge/cleaning function for fast color changes. • Pre-cutting shear for roll material up to 3 mm edge thickness. • Pressure zone consisting of a driven pressure roller running synchronously with the glue roller and two smaller, conversely conical pressure rollers with pneumatic pressure, ensures optimal joint formation of the edge material with the workpiece. Program-controlled adjustment for edge thickness with L-Motion motor. • High-frequency cross-cut saw equipped with two 0.55 kW HF motors, 12,000 rpm, 2 saw blades, and high-precision linear guides ensure a clean and precise cut, equipped with extraction hoods. Pneumatically swivels from the control panel. • High-frequency combination milling station, 2 powerful 0.55 kW high-frequency motors with multifunction tools (straight + 3 different radii), horizontal and vertical tracing of the workpiece, each with 3 L-Motion motors for positioning the horizontal tracing shoes, vertical tracing shoes, and the multifunction tool. 2 chip extraction hoods, height adjustment for the top unit with the top pressure. • Corner copying unit: Automatic processing of end edges up to 3 mm edge thickness. Equipped with 2 high-frequency motors 0.27 kW, can be activated from the control panel. Optional single-sided (front or rear edge) or double-sided corner copying. Each with 2 L-Motion motors for positioning the horizontal tracing shoes and the tool. • Rotatable control panel with 10'' color touchscreen controls glue temperature settings, automatic temperature reduction when the machine is not in use, switching units on and off and error diagnostics, motorized top pressure, extensive program memory, and fully automatic operation of the processing units.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, One-sided automatic edge banding machine with jointing unit, hot-melt adhesive application on straight workpieces (EVA-PUR glue pot with drain function optional), HF-cut-off saw station, HF milling unit, corner rounding unit, chain feed, double pressure rollers, extendable workpiece support rail, and signal lamp for workpiece sequence. Suitable for ABS, PVC, melamine, and solid wood veneer edge-banding rolls as well as fixed lengths from 0.4 – 3.0 mm thickness and workpiece height from 8 – 50 mm. Feed speed: 7.0 m/min. • 2 free spaces for finishing units • 10.0" color touchscreen • Automatic edge feeding for roll material via rotatable reel D=600 mm • Infeed fence (400 mm) with support • Two counter-rotating, demand-controlled jointing units with diamond-tipped spiral jointing cutters ensure clean and tear-free jointing of workpieces before edge banding Kedpod R U Adsfx Aqgslw • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leak-proof with glue supply from below (excess glue is automatically returned to the glue pot), precise glue application via glue roller, separate glue roller temperature adjustable, electronic temperature control with automatic standby function (prevents glue from burning if the machine remains on but unused for an extended period). Optional: EVA/PUR glue pot with drain/cleaning function for rapid color changes • Pre-cutting shear for roll material up to 3 mm edge thickness. • Pressure zone consisting of a driven pressure roller synchronized with the glue roller and an adjustable pressure roller with spring tension, for optimal joint formation between edge material and workpiece; pressure zone adjustment with mechanical SIKO indicator. • High-frequency cut-off saw equipped with HF motor 0.21 kW, 12,000 rpm, two saw blades, and high-precision linear guides ensure clean and accurate cuts, equipped with extraction hood. • High-frequency combination milling unit: two powerful 0.27 kW HF motors with carbide-tipped special cutters, suitable for radius and chamfer milling, horizontal and vertical sensing of workpiece, unit adjustment with digital counters for different edge types, two chip extraction hoods with central extraction port 2 x Ø 100 mm, height adjustment for the upper unit with pressure beam. • Corner rounding unit: Automatic processing of end edges up to 2 mm edge thickness. Equipped with a 0.27 kW HF motor, switchable from the control panel. Optionally single-sided (front or rear edge) or double-sided corner rounding. • Swiveling control panel with 10.0" color touchscreen controls glue temperature settings, automatic temperature reduction during machine downtimes, activation/deactivation of units, and error diagnostics. • LED lighting in the enclosure • Optional Riepe spray systems for anti-adhesive or cleaning agents Optional finishing units (2 free slots): • Radius scraper unit – Light, pulling cut removes any radius-milling marks and ensures a perfect finish. Fine adjustment via digital counter. • Surface scraper unit – Light, pulling cut removes glue residue from the workpiece surface at the glue joint. • Buffing unit – 2 motors 0.05 kW, 1.50

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Semi-automatic edge banding machine for molded parts, suitable for edge heights up to 140 mm, feed speed adjustable from 2.5 to 12 m/min, quick-change device for glue pot, glue pot and glue roller with Teflon coating, standby function, tiltable worktable up to 45°, and digital length cutting unit. Includes the following options: • Electropneumatic premelting unit for cylindrical 2 kg cartridges • Patented top pressure feed • Extension beam with steel balls Kodsd Sb Duspfx Aqgslw

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Compact and flexible, even in the smallest of spaces. Measuring just 2.13 m in length, this machine delivers a professional finish to your workpieces. Equipped with a 1.1 kW high-frequency motor jointing unit and a diamond-tipped spiral jointing cutter, a Teflon-coated glue pot, a pre-trimming unit, and an HF multi-function milling unit. It features two free slots for finish units, such as a surface scraping blade or polishing unit. Operation is user-friendly via a 3.5" color touchscreen. ► Control via 3.5-inch color touchscreen ► Jointing unit with 1.1 kW high-frequency motor and diamond-tipped spiral jointing cutter operating counter-rotating for clean and tear-free jointing of workpieces before edge banding ► Teflon-coated glue pot with automatic standby function ► Automatic edge feeding with roll dispenser D = 600 mm for edge material in rolls as well as fixed lengths from 0.4 – 2.0 mm for ABS, PVC, or melamine edges Kljdperrzklsfx Aqgsw ► Pressure station with 2 pressure rollers for optimal pressing of the edge band ► HF multi-function milling unit – suitable for radius and flush milling on the longitudinal edge and for the front and rear workpiece edges, including vertical rounding of the edge ► 2 free slots for finish units such as a surface scraper or buffing unit ► Workpiece chain feed with rubberized chain pads and double roller top pressure ► Pressure beam with central adjustment and SIKO display ► Fixed workpiece support (optional extendable support for large workpieces) ► 400 mm infeed fence with support ► LED lighting inside the enclosure (optional) ► Processing of workpieces from 10 – 45 mm thick ► Feed speed 6.5 m / min ► Machine length: 2,130 mm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Single-sided automatic edge banding machine with jointing unit, hot-melt glue application for straight workpieces (EVA/PUR glue pot with discharge function optional), two-motor HF (high-frequency) end trimming station with swiveling motors, HF milling unit, corner copying unit, chain feed, double roller top pressure, extendable workpiece support rail, signal lamp for workpiece sequence, and integrated travel control for contactless control of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer roll material, as well as fixed lengths from 0.4 – 3.0/6.0 mm and workpiece heights from 8 – 60 mm. Feed speed: 12.0 m/min.; 8.0 m/min. with corner copying • 3 free slots for finishing units • 10" color touchscreen. • Two counter-rotating, process-controlled jointing units equipped with diamond-tipped spiral jointing cutters ensure precise and tear-free jointing of the workpieces before edge banding. • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leak-proof with bottom glue supply (excess glue is automatically returned to the pot), finely adjustable glue application via glue roller, separate glue roller temperature adjustable, electronic temperature control with automatic standby (prevents glue from burning when the machine is on but not in use for extended periods). Optional: EVA/PUR glue pot with discharge/cleaning function for fast color change. Optional: Quick-change system for glue pot. • Automatic strip magazine with spiked roller for solid wood lippings. • Pressure zone consisting of a driven pressure roller synchronized with the glue roller and two smaller, oppositely tapered pressure rollers with spring tension. • High-frequency end trimming saw equipped with two 0.55 kW HF motors, 12,000 rpm, two saw blades, and high-precision linear guides ensures clean and accurate sawing, equipped with extraction hood, manual tilt adjustment. • High-frequency combination milling station, 2 powerful 0.55 kW HF motors with carbide-tipped special cutters. • Corner copying unit: Automatic processing of end edges up to 2 mm edge thickness. Equipped with a 0.27 kW high-frequency motor, switchable from the control panel. Optional single-sided (front or rear edge) or double-sided corner copying. • Rotatable control panel with 10" color touchscreen controls glue temperature settings, automatic temperature reduction during machine downtime, activation/deactivation of units, and error diagnostics, incl. digital meter counter for edge material consumption. • LED cabin lighting • Riepe spray systems for anti-adhesive, NFLY, and cleaning agents optionally available. Kjdsl Rix Nspfx Aqgelw Optional finishing units (3 free slots): • Radius scraping unit: Slightly pulling cut removes any radius milling marks for a perfect finish. Fine adjustment via digital counter. • Surface scraper unit: Gently scrapes away any glue residue at the glue joint from the workpiece surface. • Buffing unit: 2 motors, 0.09 kW, 1,500 rpm, provide a high-gloss finish for ABS and PVC edge materials.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Single-sided automatic edge banding machine with jointing unit, hotmelt adhesive application to straight workpieces (EVA/PUR glue tank with drain function optional), twin-motor HF end-trim saw station, HF combination milling unit, corner copying unit, chain feed, motorized upper pressure with encoder and double roller upper pressure with ball bearings, extendable workpiece support rail, signal lamp for workpiece sequence, integrated transport control for contactless operation of processing functions, and L-Motion (6 axes) control. Suitable for ABS, PVC, melamine, and solid wood veneer roll material, as well as fixed lengths from 0.4 – 3.0/6.0 mm and workpiece heights from 10 – 60 mm. • Two counter-rotating, program-controlled jointing units with diamond-tipped spiral cutters ensure clean, tear-free jointing of the workpieces before edge banding. • Teflon-coated, quick-change glue pot with 1.5 kg capacity; drip-free with glue reserve feeding from below (excess glue is automatically returned to the pot); precise glue application via glue roller; separate glue roller temperature setting; electronic temperature control with automatic standby function (prevents glue from burning if the machine remains on for longer periods without use). Optional: EVA/PUR glue pot with drainage/cleaning function for quick color change. Optional: Quick-change system for glue pot. • Pressure zone consisting of a driven pressure roller synchronized with the glue roller and two smaller, counter-conical pressure rollers with spring tension, providing optimal adhesion of the edge material to the workpiece. Motorized adjustment of the pressure zone (1xL-Motion). • High-frequency end-trim saw equipped with two HF motors, 0.55 kW, 12,000 rpm, 2 saw blades; pneumatically tiltable from the control panel. • HF combination milling station, two powerful 0.55 kW HF motors with carbide-tipped special cutters. Motorized adjustment of the milling station (4xL-Motion). Ksdpfx Ajl Rix Ejqgelw • Corner copying unit: automatic processing of end edges up to 2 mm edge thickness for PVC/ABS edge material. (Not recommended for soft and post-formed profiles). Optional one-sided (front or rear edge) or double-sided corner copying. Motorized adjustment of the corner copying unit (1xL-Motion). • Swiveling control panel with 10" color touchscreen, meter counter, and remote access module. • Standard equipment includes LED lighting and LED-Motion system. • Optional: motorized adjustable infeed rail from the control panel (1xL-Motion). Optional finishing units (3 free slots): - Multi-radius scraper R1+R2, pneumatic ON/OFF control via air cylinder; radius selection (R1/R2) switchable from the control panel. - Surface scraper unit: removes glue residues from the workpiece surface along the glue joint with a gentle scraping cut; pneumatic ON/OFF control via air cylinder. - Buffing unit: 2 motors, 0.09 kW, 1,500 rpm, for super-finish results.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Single-sided automatic edge banding machine with pre-milling unit, hotmelt adhesive application for straight workpieces (EVA-PUR gluepot with drainage function optional), HF end-trimming station, HF milling unit, corner copying unit, chain feed, double pressure rollers, extendable workpiece support rail, signal lamp for workpiece sequencing and integrated track control for contactless operation of processing functions. Suitable for ABS, PVC, melamine, and heavy wood veneer roll material, as well as fixed lengths from 0.4–3.0/6.0 mm and workpiece heights from 8–60 mm. Feed rate: 10.0 m/min; 8.0 m/min with corner rounding • 3 free spaces for finishing units • 10" color touch screen. Kedpfxod R U Ago Aqgolw • Automatic edge feeder for roll material via rotary roll table, D=800 mm. • Two contra-rotating, sensor-controlled pre-milling units with diamond-tipped spiral cutters ensure clean and tear-free pre-milling of workpieces before edge application. • Long infeed fence (650 mm) with support. • Teflon-coated, quick-change gluepot with 1.5 kg capacity, leakproof with glue supply from below (excess glue is automatically returned to the gluepot), precision glue application by glue roller, separate adjustable glue roller temperature, electronic temperature control with automatic standby function (prevents glue from burning if the machine is not used for an extended period but remains switched on). Optional: EVA/PUR gluepot with drainage/cleaning function for rapid color change. • Automatic strip magazine (70 mm intake capacity) with spiked roller for solid wood lippings. • Pressure zone consisting of a driven pressure roller synchronized with the glue roller and two smaller, oppositely conical spring-loaded pressing rollers ensures optimal joint formation between the edge material and the workpiece, with digital counter for pressure zone adjustment. • High-frequency end-trimming saw equipped with HF motor, 0.35 kW, 12,000 rpm, two saw blades and high-precision linear guides for clean and precise cutting, equipped with dust extraction hood. • High-frequency combination milling station, two powerful 0.55 kW HF motors with carbide-tipped special cutters, suitable for radius, flush, and bevel milling, horizontal and vertical workpiece tracing, aggregate adjustment with digital counters for different edge types, two chip extraction hoods with 2 x Ø 100 mm central extractors, height adjustment of the upper unit linked to the top pressure roller. • Corner copying unit: Automatic machining of end edges up to 2 mm edge thickness. Equipped with a 0.27 kW HF motor, selectable via control panel. Option for single-sided (front or rear edge) or double-sided corner copying. • Swiveling control panel with 10" color touchscreen manages glue temperature settings, automatic temperature reduction during machine idle time, on/off functions for processing units and error diagnostics, including digital meter counter for edge material usage. • LED lighting in the enclosure • Riepe spray systems for anti-adhesion, NFLY, and cleaning agent optionally available Optional finishing units (3 free spaces): • Radius scraper unit: Light scraping cut removes any milling marks left by radius cutters, providing a perfect finish.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Preformed edge banding machine with direct glue application to the edge material for thin and thick edges from 0.4 to 3 mm. • Leak-proof gluepot with bottom glue reservoir and fast heat-up time after machine downtime. Automatic start of the application roller after approx. 8-10 min. • Pressure roller driven by gear motor, infinitely variable via potentiometer from 0-15 m/min. • Automatic edge feed and automatic end trimming for straight and shaped workpieces via foot switch. • Pneumatic roller separation unit max. 3 x 30 mm Kjdpod Sb Dtjfx Aqgolw • Film plate D = 600 mm

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: Werksüberarbeitungsnummer: WÜA1363DK-F7560, Rabljeni stroj GM020.0068 AKV 3003 DK - F Leto izdelave: 2007 Ksdpfxew Nih Io Aqgslw Izvedba: 3 mm 1. rezkalna postaja: Kombinirana Površinski vlečni strgalnik z izkopom Podvozje Pnevmatska nastavitev rezkanja Ročica končnega stikala, naklon 7,5°

Stanje: rabljeno, Leto izdelave: 1992, Domet 1800 mm Višina obdelovanca 750 mm Potezna dolžina 4000 mm Širina mize 5500 mm Tehnični podatki so podatki proizvajalca oz. upravljavca in so za nas nezavezujoči. Pridržujemo si pravico do predhodne prodaje; izključno veljajo naši poslovni in prodajni pogoji. Klsdjytx Nvjpfx Aqgew O nas več kot 400 lastnih strojev na zalogi preko 15.000 m² skladiščne površine, žerjavna kapaciteta 70 t več kot 10.000 kosov dodatne opreme za vašo delavnico Če želite prodati stroje, proizvodne linije ali svoje podjetje, nas kontaktirajte. Več ponudb najdete na naši spletni strani. Ogledi so možni po dogovoru. Veselimo se vašega obiska. Vaša Markus Hirsch ekipa

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Stroj za lepljenje robov Proizvajalec: Felder Tip: Tempora 60.06, F600 Leto izdelave: 2019 Kljdpfx Asxix Hxsqgjw Popolnoma avtomatsko upravljanje iz nadzorne plošče. Enota za spajanje: Da Enota za odrezovanje: Da Enota za rezkanje radijev: Da Rezilo za vlečenje radijev: Da

Stanje: kot nova (razstavni stroj), Edge banding machine as display model 5 Units: Jointing milling unit including AIGNER diamond jointer cutter heads, with Konstantin DIA replaceable knife system and controlled edge blow-off nozzle behind the 2nd cutter head. End trimming saw unit: 1 motor, 2 saw blades Radius milling unit with Easy Set adjustment system Radius scraper unit, retractable, including: - Extraction device with chip collection box for scraper shavings - With Easy Set adjustment system Kljdpfsw Rcmyox Aqgow - 2 digital readouts Flat scraper unit with 4-way reversible scraper knives. The unit is retractable. General equipment: - High-gloss package: Roller tracing for radius milling, radius scraper, and flat scraper units - Large visual, noise, and safety enclosure for all units and the glue pot - Teflon-coated glue pot with energy-saving standby mode - Glue roller with feed auger for long and tall workpieces - Pressure zone with 1st motor-driven steel pressure roller + 1 rubber roller - Roller shears for edges 44 x 2 mm Technical data: Edge thickness: 0.4 – 2 mm Min. panel width: 120 mm Min. panel length: 90 mm Min. panel thickness: 10 mm Max. panel thickness: 40 mm Feed speed: 7 m/min Extraction ports: 3 x 150 mm Connection: 8 kW - 400 V / Compressed air: 6 bar

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, številka stroja/vozila: 36956, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 60 mm, največja debelina roba: 3 mm, skupna dolžina: 9.800 mm, skupna masa: 600 kg, višina plošče: 1.060 mm, TEHNIČNE PODROBNOSTI Višina obdelovanca: 60 mm Debelina roba: do 3 mm Minimalna širina plošče: 55 mm Minimalna dolžina plošče: 100 mm Višina plošče: 1.060 mm Nosilec orodja: ISO 30 PODROBNOSTI O STROJU Mere & Teža Skupna dolžina: 9.800 mm Teža: 600 kg Vhodna frekvenca: 50 Hz OPREMA Povratni sistem Kledpfxox A Tzqe Aqgjw Deluje z PUR lepilom Razpršilni sistem Predrezalna enota RT 20 Lepilna enota SP 20 6-pozicijski magazin za robove Končna rezalna enota IT 90-S Groba rezkalna enota RS 10 Fina obrezovalna enota RF 40 Opomba: Dodatne informacije o opremi so na voljo v priloženi kartici stroja.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, številka stroja/vozila: 220.01.016.22, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 60 mm, hitrost pomika os X: 18 m/min, premer vrtljive mize: 750 mm, največja hitrost vrtenja: 12.000 obr/min, The machine is being auctioned due to the closure of operations! Further details on the machine’s equipment can be found in the attached order confirmation. TECHNICAL DETAILS Workpiece height: 8–60 mm Rotary table edge magazine diameter: 750 mm Edgeband material (coil): 0.4–3 mm Rotary table diameter for coiled edge material: 740 mm Workpiece infeed support surface: 600 mm Spindle speed, diamond jointer unit: 12,000 rpm Feed rate, chain conveyor: 10 and 18 m/min Cross-cut saw unit speed: 12,000 rpm Upper multifunctional milling unit speed: 12,000 rpm Lower multifunctional milling unit speed: 12,000 rpm Cutter assembly: 64 mm MACHINE DETAILS Electrical Data Voltage: 400.0 V Phases: 3 Frequency: 50/60 Hz Current: 28.0 A Power: 15.0 kW Kljdsxwt Nqopfx Aqgow FEATURES Ball bearing rotary table for coiled edge material Workpiece infeed and infeed fence with manual adjustment Chain feed with two feed rates Edge feeder for both coil and strip material, single feed Upper and lower multifunctional milling units with x-motion PLUS via smartouch Upper and lower radius scraper blade, x-motion PLUS Corner processing unit with motorized adjustment for postforming and softforming profiles Upper and lower polishing unit Pneumatic-mechanical retract safeguard for workpiece spacing control glueBox application unit