Stroj za robne trakove

Lange B 590K-PUR

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1991, Torwegge multi-blade saw Chain width: 250 mm Gedoucnukopfx Anfobl Cutting height: 100 mm Total connected load: 39 kW

Stanje: rabljeno, številka stroja/vozila: 006370, Type of applied edging: thin edge, thick edge Gluing system: EVA Joint milling: yes Multifunction unit: yes Top milling unit: yes Max. feed speed: 25 m/min Gbodpol Txw Hjfx Anfjl Maximum panel thickness: 60 mm Working units: 12 units

Stanje: novo, Leto izdelave: 2024, TECHNICAL DATA Table size: 1100 x 760 mm Table height: 870 mm Spindle: Non-interchangeable 30 mm Clamping height: 140 mm Height adjustment: 125 mm Extraction ports: 2 x Ø 120 mm Speeds: 3000 / 4500 / 6000 / 9000 rpm Colour: RAL 7035 Light Grey and RAL 5000 Violet Blue Gedpfxsfpb Nme Anfjbl Net weight: approx. 800 kg TECHNICAL DESCRIPTION Robust German engineering Spindle moulder with fixed spindle, tilting to one side, for tilt range from -5° to +45.5° Positioning control for height and tilt adjustment, with zero point reset for height and offset travel Electronic position and speed displays 4 speeds: 3000 / 4500 / 6000 / 9000 rpm Quick-release belt tensioning device Push-button for spindle start and stop Clockwise and counter-clockwise rotation Quick-release cutter clamping device Precision-planed grey cast iron table with rigid frame support Control panel mounted below on the rigid frame support Fence 216 with total adjustment via handwheel and LCD display, including cast fence plates and aluminium splitter plates Machine socket outlet Lockable main switch Mechanical motor brake Cutter guard and pressure device GAMMA V 1629 Curved fence 1639 Tapoa Spindle 30 mm, non-interchangeable CE compliant GS tested

Leto izdelave: 2000, stanje: dober (rabljeno), Barberan Laminating Line For all inquiries, please contact 790800714 The line is in continuous operation. Maximum laminating width: 1300 mm Minimum thickness: 3 mm Maximum thickness: 40 mm Maximum element length: 2800 mm Gsdpfx Aeilqvronfobl Minimum length: approximately 600 mm Stepless speed adjustment from the brushing machine, maximum speed 20 m/min. The line includes: - Tommassini automatic loader (out of order) - Top-and-bottom brushing machine - Pre-heating lamps before the adhesive rollers (top and bottom) - PVAC glue applicator - Drying lamps (top and bottom) - Steel calender roller press section - Additionally, the line is equipped with an upper surface corona treater (operational) – allows for single-sided lamination with PP films

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Features: - Sliding table made of anodized aluminum, incl. high-precision guide made of hardened and ground steel - Sliding table can be locked in any position - Saw blade guard with swing-away attachment - Extension arm with adjustable angle stop and length compensation every 5° and at 22.5° - Mitre gauge and eccentric clamp - Belt shifting for speed change from above (opening in the saw table) - Indicator lights for current saw blade speed - 3-axis programmable unit via 15" TFT touchscreen based on Windows, incl. 2,500 program slots, 2 USB ports, and 1 Ethernet network connector - Scoring unit with electro-motor driven height adjustment and motorized axial pulse adjustment, incl. digital display for height and width Gedpfx Anerrw Ucjfebl - Angle stop with 3 stop flip fences; 2 fences with digital readout, 1 fence analog but can also be set digitally via coupling to a digital fence - Overhead control panel incl. automatic star-delta starting - Electrical system and safety devices compliant with CE standards Technical Data: - Saw blade tilt: 0° to 45° - Table dimensions: 1,030 x 680 mm - Working height: 870 mm - Sliding table dimensions: 3,200 x 400 mm - Cutting length with scoring unit: 3,420 mm - Cutting width at rip fence: 1,300 mm - Max. cutting height with 500 mm saw blade: 90°: 177 mm / 45°: 133 mm - 3 speeds: 3,000 / 3,600 / 4,200 rpm - Motors: Main saw: 7.5 kW / 10 HP / 50 Hz, scorer: 0.55 kW / 0.75 HP - Sound pressure level acc. to EN 27960: 84.4 – 86.3 dB(A) - Extraction nozzles: 1 x 120 mm, 1 x 100 mm - Angle stop extendable to 3,400 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Machining Center Manufacturer: Weeke Model: BHX 500 Year of Manufacture: 2008 Working Range X: 2,500 mm Working Range Y: 1,300 mm Working Range Z: 4 - 80 mm Number of Milling Units: 2 Gbedpfx Anjh E Sghofsl Number of Drilling Units: 2 Vertical Drilling Spindles: 72 Horizontal Drilling Spindles (X): 16 Horizontal Drilling Spindles (Y): 4 Grooving Saw: Swivels 90° X-Axis Speed: 130 m/min Y-Axis Speed: 80 m/min Z1-Axis Speed: 50 m/min Z2-Axis Speed: 27 m/min Spindle Speed: 18,000 rpm Dismantled - immediately available

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Nanxing NPC330 je visokozmogljiva tračna žaga, zasnovana za hitro in natančno razrezovanje MDF, iverke, vezane plošče in drugih plošč na lesni osnovi. Gre za idealno rešitev za pohištveno industrijo, ki potrebuje visoko produktivnost in dosledno natančnost. Voziček žage poganja 2 kW servo motor z zobniškim pogonom, kar omogoča hitrost rezanja do 90 m/min in povratno hitrost do 120 m/min. Napreden programski paket vključuje optimizacijo rezanja, upravljanje delovnega procesa, simulacijo, prikaz napak in samodejni tisk etiket za učinkovito sledenje proizvodnji. Ključne značilnosti - Višina reza: do 120 mm - Širina reza: 3270 mm - Avtomatski pritisni nosilec, ki se prilagaja skupni višini skladovnice plošč za optimalno učinkovitost - Zračna lebdeča miza zagotavlja enostavno in nepoškodovano rokovanje s ploščami - 10 pnevmatskih prijemal (opcijsko 12) omogoča varno pritrditev in natančno pozicioniranje - Servo poravnava stranic za popolnoma pravokotne reze - Polni varnostni sistem: zaščita rok operaterja, pokrov lista na tečajih ("piano" pokrov), opcijska varnostna ograja in svetlobna zavesa - Hitro snemljiv glavni žagin list in enoklikovna nastavitev predrezila - Samodejni mazalni sistem za daljšo življenjsko dobo stroja in nižje stroške vzdrževanja - Industrijska elektro omara z mednarodnimi komponentami, 21,5" zaslon na dotik, PC (i5 CPU, 8 GB RAM) Tehnične specifikacije - Največja dolžina reza: 3270 mm - Največja višina reza: 90 mm (opcijsko 120 mm) - Glavni motor žage: 15 kW (opcijsko 18,5 kW), 3910 rpm - Motor predrezila: 4300 rpm - Glavni žagin list: Ø380 mm (gred Ø60 mm) - Predrezilo: Ø200 mm (gred Ø45 mm) - Podajalna hitrost: 90 m/min (povratek 120 m/min) - Skupna instalirana moč: 24,2 kW - Dimenzije stroja: 6900 × 5400 × 1820 mm - Teža: 4.560 kg - Napajanje: 380V / 50Hz / 3-fazno - Potreba po zraku: 0,6 MPa - Odsesovanje: Ø150 mm × 3, min. hitrost 28 m/s Prednosti za proizvajalce - Visoka produktivnost: paketni razrez z visoko hitrostjo naprej/povratno - Odlična natančnost: ±0,03 mm zaradi robustnega okvirja in pnevmatskih prijemal - Digitalna optimizacija: vključen AutoCut za minimizacijo odpadka in optimizacijo reznih planov - Najvišja varnost: popoloma zaprta zaščita stroja, svetlobna zavesa in gumb za nujno zaustavitev - Prijazno do uporabnika: lebdeča miza in servo-podajni sistem za enostavno rokovanje s ploščami Gbodpfexcwwpex Anfjl

Stanje: novo, Leto izdelave: 2024, Osama Automatic 4-Roller Glue Application Machine Type: S4R/P-1400 Automatic gluing machine with 2 motors Working width: 1,400 mm Max. passage height: 0 - 100 mm Speed: 22 m/min Working height: 900 mm Gbedpfx Aneu I R Utefjl Roller diameter: 250 mm Motor power: 3 kW Electrics: 400 V / 50 Hz / 3 phase Automatic gluing machine with 4 rollers for polyvinyl acetate (PVAC), urea-formaldehyde (UF), and polyurethane adhesives, suitable for various materials such as MDF, multi-layer board, chipboard, composite materials, and drywall panels. This type of gluing machine allows precise and homogeneous dosing of glue, taking into account the corrugation of the rollers, which must be suitable for the type of production. The heavy-duty structure and the roller core, which is manufactured with increased thickness compared to earlier models, enable high production rates without major issues and bonding of materials up to a width of 2200 mm. Roller removal for maintenance is a simple process, as the supports can be separated into two halves via an easy bayonet coupling. It is also possible to equip the gluing machine with various accessories, such as an electronic speed controller, automatic roller washing device, and an automatic lifting device for the upper roller with position display on the screen. The S4R/P gluing machine can be used for various types of production, including in the construction sector and for manufacturing foam panels and mattresses. Equipment features: - Automatic roller cleaning - Infeed roller - Outfeed roller - Working height: 900 mm - Infeed table TRF 1400x3000 mm, PVC rollers 60 mm, spacing: 200 mm - Outfeed table TDF 1400x3000 mm, disc rollers D: 122 mm, stainless steel Location: Ex stock 54634 Bitburg - Available immediately -

Stanje: rabljeno, Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 60 mm, skupna dolžina: 7.920 mm, trajanje garancije: 3 meseci, HOLZ-HER Edgebander ACCURA 1556 premium with intelligent equipment package for edge thicknesses up to 15mm. Simple program changes and tool adjustments via the 18.5" touch control panel. Short heating time for the GlueJet adhesive system, approx. 2 to 3 minutes, depending on glue type and ambient temperature. Always fresh glue thanks to the GlueJet application system and glue cartridges. Changing PUR glue and cleaning the system is quick and easy, taking only a few minutes. Axis adjustment via high-precision, repeatable servo motors. Special configuration for materials with protective film, such as high gloss and super matt finishes! One absolute highlight of the machine is the multifunction package, which proves especially beneficial for operations processing a variety of edge types. The DIA tools have a multi-stage design and can switch between radii and chamfers depending on requirements—from the longitudinal trimming unit and corner copying to profile scraping. The extendable workpiece support and extended infeed area provide additional support when handling large panels. A guidance system assists with feeding small workpieces into the machine. Edge thickness – coil material: 0.4 – 3 mm (material-dependent) Edge thickness – strip material: 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Minimum workpiece width: 65 mm Feed speed: 10 – 25 m/min. Glue application with GlueJet using EVA and PUR glue types, with minimal effort. Compatible with all standard edge materials, including high gloss and super matt, as well as solid wood edges up to 15 mm. iTronic – pressure and glue quantity management Ready for integration with RETURN systems Gedpfx Aox Emf Djnfobl Motorized pressure bridge with top belt drive Multifunction units for fast setup – radius, flush, chamfer operations Spraying units, vertical & horizontal and much more. Delivery, installation, and machine training can be offered by us for an additional fee. The machine is currently located in our distribution warehouse in Gratwein, Austria. In case of discrepancies between the German version and a foreign language version, only the German version shall be binding. Our general terms and conditions (GTC) can be found on our homepage at holzher.de/de/agb.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, potovalna razdalja osi X: 4.600 mm, pomik osi Y: 1.935 mm, pomik po osi Z: 275 mm, število osi: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It offers a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine is equipped with a vacuum system, a conveyor belt for chip extraction, and liquid cooling. If you are looking for high-quality CNC machining capabilities, you should consider the Biesse Rover C9.50 that we have for sale. Contact us for more information. Work Table and Clamping • 8 ATS panel holders (L = 1525 mm) and 24 sliding rails • Automatic positioning of panel holders and sliding rails (EPS X-Y) • Pneumatic locking system, divided into 2 working areas in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right) with pneumatic system • 4 removable middle stops, stroke 140 mm (2 left + 2 right) with pneumatic system • Sensor for detecting lowered stops • Pneumatic system for lifting bar holders • 6 lifting bar holders for easy loading (H = 74 mm modules) Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for the standard vacuum system Machining Units and Configuration • C3-A1 composition: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis machining unit • Flange for mounting units on a working unit with 5 interpolating axes (units only usable when the electric spindle is vertical) • C3-P2 composition: Gjdpox D H Hcofx Anfebl • Additional Z-carriage for rear machining units, controlled by an independent Z-axis • 16 vertical and 4 horizontal drilling spindles in Y-direction • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, located in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle) Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional Equipment • Additional overhauled 5-axis main spindle available • Conveyor belt for chips and scrap (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles or one electric spindle plus a liquid-cooled drilling head) Note: The technical specifications and descriptions are taken from the original order confirmation and are for informational purposes only; they are not binding.