Amtec Trs Sa12-S nakup rabljenega (88.720)

Stanje: novo, Leto izdelave: 2025, VFFS machine with integrated gravity metal detector for inspecting vertically falling products and with a 10-head multihead weigher for bulk goods and granulates. Compact design without a platform frame. Suitable for producing pillow bags with back seal, gusseted stand-up pouches (gusset tool required), OR for pyramid-shaped bags (special sealing unit required). The vertical form-fill-seal machine is equipped with: touchscreen; PLC; photoelectric sensor (for print mark detection) for controlling sealing/cutting position; pneumatic sealing unit for end sealing; servo motor for film draw-off; thermal transfer printer for batch number, date, best-before date. - Multihead weigher specifications: Number of weighing heads: 10; weighing range (per discharge): 10–1500g; volume per head: 1.6L; weighing accuracy: X(0.5); discharge gate: single flap; surface finish: smooth (optional dimpled finish); product-contact parts: AISI 304 stainless steel (AISI 316 available at extra cost). - Gravity metal detector specifications: Sensitivity: FE from Ø 1.2mm, AISI from Ø 2.5mm; tube diameter: according to forming shoulder. Iiodpfx Aev Nnbveqush - VFFS machine specifications: Max. machine cycle rate (idle): 65 cycles/minute; bag size: L(40–350) x W(70–270)mm (double film draw-off possible for longer bags); suitable film width: 160–560mm; product-contact parts: AISI 304 (AISI 316 optional at extra cost); power supply: 220V, 50/60Hz; required compressed air: 0.4–0.8MPa. Please note that our new prices are often below typical used market prices. Simply contact us and tell us about your packaging application. Typically, 30–50 different new machines are available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting at just 3 weeks. All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical packaging machine for the production of pillow bags with back seam and gusseted stand-up pouches (gusset tooling required). Equipped with: quick-change forming set; SIEMENS PLC; WEINVIEW touchscreen; photo sensor (print mark detection) for seal/cut positioning; pneumatic sealing unit for end sealing; servomotor for film feed; thermal transfer printer for batch number, date, best before date. - VFFS machine specifications: max. machine cycle rate in idle: 70 cycles/min; bag size: L(40-200)xW(30-150)mm; suitable film width: 80-320mm; product-contact parts: AISI 304 (optionally AISI 316 at extra cost); power supply: 220V, 50/60Hz; power consumption: 3.2kW; required compressed air: 0.7MPa; air consumption: 0.2-0.4m³/min; weight: 310kg. Iisdpsv Nnb Njfx Aqueh Please note that our new prices are often below typical used machine prices. Feel free to inquire and tell us about your packaging application. - We usually have 30-50 different new machines immediately available from stock. For customer-specific machines, we offer very short delivery times starting from approx. 3 weeks. - All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical form-fill-seal (VFFS) packaging machine for the production of pillow bags with longitudinal rear seam, gusseted stand-up pouches (gusset tooling required) OR for pyramid-shaped bags (special sealing unit required). Equipped with: touchscreen; PLC; photoelectric sensor for registration mark detection (controls seal/cut position); pneumatic end-sealing unit; servo drive for film pulling; thermal transfer printer for batch number, date, and best-before date. - Specifications of the VFFS machine: max. idle cycle rate: 50 cycles/min; bag size: L(40–450) x W(105–350) mm (double film pull possible for longer bags); suitable film width: 230–720 mm; product-contact parts made of AISI 304 (optionally AISI 316 for an additional charge); power supply: 220V, 50/60 Hz; power consumption: 3.8 kW; required compressed air: 0.4–0.8 MPa; compressed air consumption: 0.8 m³/min; dimensions (LxWxH): 1996*1496*2138 mm; weight: 850 kg. Iijdpfxov Nndds Aqush Please note that our new machine prices are often below typical used machine prices. Feel free to inquire and inform us of your packaging application. – We always have 30–50 different new machines available ex-stock for immediate delivery. For machines manufactured to customer specifications, we offer very short delivery times starting from approx. 3 weeks. – All machines are delivered with a full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical packaging machine for the production of pillow bags with back seam, gusseted stand-up pouches (gusseting tool required), OR for pyramid-shaped bags (special sealing unit required). Equipped with: touchscreen; PLC; photoelectric sensor (register mark detection) for seal/cut positioning; pneumatic end-sealing unit; servo motor for film feed; thermal transfer printer for batch numbers, date, best-before date. - VFFS machine specifications: max. machine cycle rate (no load): 40 cycles/minute; bag sizes: L(40-650)xW(140-450)mm (double film feed for longer bags possible); suitable film width: 220-920mm; product-contacting parts made of AISI 304 (optionally AISI 316 available at extra cost); power supply: 220V, 50/60Hz; power consumption: 4.5kW; required compressed air: 0.2-0.8MPa; compressed air consumption: 1.0m³/min; dimensions (LxWxH): 2470*1730*2065mm; weight: 1150kg. Iiodpfov Nnd Djx Aquoh Please note that our new machine prices are often below the usual second-hand prices. Just inquire and let us know your packaging requirements. - We usually have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short delivery times starting from about 3 weeks. - All machines are supplied with a full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical form-fill-seal (VFFS) machine for producing pillow bags with longitudinal seam and gusseted stand-up pouches (gusset tool required). Equipped with: quick-change forming set; SIEMENS PLC; WEINVIEW touchscreen; photoelectric sensor (print mark detection) for sealing/cutting position; servo-driven sealing unit for end sealing; servo motor for film feed; thermal transfer printer for batch number, date, best before date. - Specifications VFFS machine: max. machine cycle rate (unloaded): 30 cycles/minute; bag size: L(60-600)xW(200-585)mm (double film draw-off L = 1100mm), gusseted stand-up pouch: L(60-600)xW(140-500)xD(100-250)mm (double film draw-off L = 1100mm); suitable film width: 420-1200mm; product-contacting parts made of: AISI 304 (optionally AISI 316 at extra charge); power supply: 220V, 50/60Hz; power consumption: 8.7kW; required compressed air: 0.7MPa; air consumption: 0.25-0.40m³/min; weight: 1060kg. Please note that our new machine prices are frequently lower than typical used machine prices. Simply inquire and let us know your packaging requirements. - Generally, 30-50 different new machines are available immediately from stock. For custom-built machines, we offer very short lead times from approx. 3 weeks. - All machines come with a full warranty. Iisdpfxjv Nnfns Aqujh

Stanje: novo, Leto izdelave: 2025, Vertical packaging machine, specifically designed for the production of stand-up pouches with a rectangular base and quad-seal (4-side seal). Equipped with: touchscreen; PLC; photoelectric sensor (print mark detection) for sealing/cutting position; pneumatic sealing unit for end sealing; servo motor for film draw-off; thermal transfer printer for batch number, date, and best-before date. - VFFS machine specifications: max. machine cycle speed idle: 45 cycles/minute; bag size: length (180-400mm), front width: (70-220)mm, side width: (45-120)mm, (double film draw-off for longer bags possible); suitable film width: 270-620mm; product-contact parts made of: AISI 304 (optionally AISI 316 at extra cost); power supply: 220V, 50/60Hz; power consumption: 5.8kW; required compressed air: 0.4-0.8MPa; compressed air consumption: 0.3m³/min; dimensions (LxWxH): 2330*1520*2025mm; weight: 880kg. Ijdpfx Aqev Nng Esuoih Please note that our new prices are frequently below typical used equipment prices. Feel free to inquire and tell us about your packaging requirements. – We generally have 30–50 different new machines immediately available from stock. For customer-specific machine builds, we offer very short lead times starting from approx. 3 weeks. – All machines are delivered with a full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical packaging machine in high-speed version with volumetric doser for granulates. The following bag types are configurable: pillow bags with back seal, 3-side seal bags, or 4-side seal bags (surcharge applies). PLC-controlled operation via touchscreen, cross-sealing driven by servo motors. - Specifications: * Bag size: Pillow bags with back seal: L(20-145)xW(20-110)mm, 3- or 4-side seal bags: L(20-145)xW(30-120)mm * Suitable film width: 220mm * Suitable film material: composite film, heat-sealable (monofilm upon request) * Dosing range: 1-50g * Max. machine cycle rate (idle): 120 cycles/minute * Power supply: 220V, 50Hz * Power consumption: 2kW * Required compressed air: max. 0.8MPa * Dimensions: L900xW700xH1700mm * Weight: 300kg Iisdpfov Nnhvex Aqueh Please note that our new prices often undercut typical used equipment prices. Feel free to inquire and let us know your packaging requirements. Generally, 30–50 different new machines are always available from stock for immediate delivery. For machines manufactured to customer specifications, we offer very short delivery times starting from approx. 3 weeks. All machines come with a full warranty.

Stanje: novo, Leto izdelave: 2025, Vertical packaging machine with piston pump for dosing liquids. Equipped with a punching tool for rounded cross-seal corners. The following bag types can be configured: pillow bag with back seal, 3-side seal bag, or 4-side seal bag (surcharge applies). PLC controlled, operation via touchscreen, cross-sealing driven pneumatically. Specifications: - Bag size: Pillow bag with back seal: L(40-160) x W(20-100) mm; 3- or 4-side seal bag: L(40-160) x W(20-100) mm - Suitable film width: 240 mm - Suitable film material: composite film, heat-sealable - Dosing range: 1–50 ml - Max. machine cycle rate (idle): 60 cycles/min - Power supply: 220V, 50Hz - Power consumption: 2 kW - Required compressed air: max. 0.8 MPa - Compressed air consumption: 2 m³/h - Dimensions: L900 x W700 x H1850 mm - Weight: 250 kg Iedsv Nnimspfx Aqusih Please note that our prices for new machines are often below typical used machine prices. Feel free to contact us and let us know your packaging requirements. – Generally, 30–50 different new machines are always available from stock for immediate delivery. For custom-made machines, we offer very short delivery times starting from around 3 weeks. – All machines come with a full warranty.

Stanje: novo, Leto izdelave: 2025, Fully automatic carton sealing machine for lids. Efficient, fast, and precise sealing and taping (one direction) of cartons with identical dimensions in series. Specifications: Carton size in mm: L(200-600) x W(150-500) x H(150-500); max. machine cycle rate idle: 40 cycles/minute; power supply: 110/220V; tape width in mm: 48/60/70; machine dimensions: L1690 x W830 x H1180mm; weight: approx. 180kg. Please note that our new prices are often below the usual prices for used machines. Simply send us your inquiry and tell us your packaging requirements. – We generally have 30-50 different new machines available from stock for immediate delivery. For customer-specific machines, we offer very short lead times, starting at around 3 weeks. – All machines are supplied with a full warranty. Iiodpfxov Nkv Nj Aqush

Leto izdelave: 2025, stanje: novo, Screw conveyor system for powders and very fine, granulated products. Stainless steel housing with stainless steel tube. Motor and screw conveyor mounted at the bottom of the machine. Feed hopper with 200-liter capacity and vibration motor for a consistent product flow. - Specifications: Conveyor capacity depending on product: up to 5 m³/h; maximum quantity per filling process: up to 10 kg; discharge height: approx. 1,850 mm; standard angle: 45°; tube diameter: 141 mm; power supply: 380V, 1.56 kW; machine dimensions: size depends on the customer-specific final system (hopper, conveying length, and angle can be adapted – optional: mixing device); weight: approx. 170 kg. Iedpjv Nk Avefx Aquoih The machine/system is also available in additional versions for various packaging sizes and packaging speeds. Please note that our new prices are often below the typical used equipment prices. Feel free to inquire and tell us about your packaging application. – Typically, 30–50 different new machines are available from stock for immediate delivery. For customer-specific machines, we offer very short lead times from about 3 weeks. – All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Stand-alone auger filler with weight feedback via load cell and dual filling (fast volumetric filling followed by slow, precise top-up). SIEMENS PLC-controlled via SIEMENS touchscreen. Hopper volume: 100 liters; filling weight: 1,000–50,000g; stainless steel version with servomotor. Includes pneumatic flap for product cut-off after filling and dust protection cover. Iisdpfov Nk Ewjx Aquoh - Specifications: Packaging accuracy (depending on product and total weight): 0–0.2% (for 1–20kg), 0–0.1% (for 20kg and above); max. machine cycle rate in idle: 30 cycles/minute; power: 380V, 3.2kW; machine dimensions: L1130xW950xH2800mm; weight: 500kg. Please note that our new machine prices are often below the usual prices for used equipment. Feel free to contact us and tell us about your packaging application. Typically, 30–50 different new machines are available from stock for immediate delivery. For customer-specific machines, we also offer very short lead times from around 3 weeks. All machines are supplied with a full warranty.

Stanje: novo, Leto izdelave: 2025, Stand-alone filling system for pastes and viscous substances into cans, containers, etc. Stainless steel version, operated manually via foot pedal or automatic filling with adjustable speed. Can be operated either with the supplied hopper or by vacuum using a tube from a separate tank. The filler moves inside the container from bottom to top during the filling process. Suitable for various viscous substances (e.g. pastes, creams, ointments). Specifications: Accuracy: +/- 0.5%; max. machine cycle rate (idle): 40 cycles/minute; power supply: 220V, max. 1.0kW. Iisdpfjv Nk E Rex Aqueh Please note that our new prices are often below the usual used equipment prices. Feel free to inquire and let us know your packaging requirements. Typically, 30-50 different new machines are always available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from approx. 3 weeks. All machines are available with a full warranty.

Stanje: novo, Leto izdelave: 2025, Example system for filling liquids into bottles, capping with a screw cap, and subsequent labeling of the bottles. Complete system consisting of: feed sorting table; filling machine with 4 filling heads for high or low viscosity liquids; capping machine for different cap sizes and shapes including cap sorting feed; labeling machine for bottles/cans/containers made of glass or plastic; collection table. The individual machines of the packaging line are interconnected by conveyor belts, which gives the system high flexibility in installation. Specifications: Number of filling nozzles: 4; filling range: 100-1000ml; dosing type: piston pump; accuracy: +/- 1%; bottle height: 15-400mm; bottle diameter: 25-200mm; speed: max. 1000 bottles/hour; label size: L25-300mm, W20-180mm. All wetted parts are made of stainless steel 304. Dimensions and total weight of the system depend on the final layout. Please note: This is just an example system. Final specifications may differ. The machine photo only shows the 4-head filling machine. Please note that our new prices are often lower than standard used prices. Feel free to contact us and tell us about your packaging requirements. Usually, 30-50 different new machines are always immediately available from stock. For custom-built machines, we offer very short delivery times from approx. 3 weeks. All machines are available with full warranty. Isdpfx Aov Nlbasqueih

Stanje: novo, Leto izdelave: 2025, Sample system for volumetric filling and capping in a monoblock design. Volumetric injection pump, automatic cap orientation and closing. – Specifications: 4 or 8 filling nozzles; filling range: 20-1000 ml (optimal filling ranges: 20-100 ml, 50-250 ml, 100-500 ml, 200-1000 ml); speed: up to 5,000 bottles/h; filling accuracy: < +/- 1%; capping rate: >99%; SS316 stainless steel; power supply: 220V, 1.2-2.2 kW; compressed air: 0.6 m³, 6 bar; weight: 800-1000 kg. – All specifications are exemplary only. Please send us an enquiry with your product details (size, shape, required speed, etc.) so we can prepare a customised offer for you. Iiodpfsv Nlckex Aqush Please note that our new machine prices are often below the usual prices for used equipment. Feel free to send us your enquiry and tell us about your packaging requirements. – We typically have 30-50 different new machines in stock for immediate delivery. For custom-manufactured machinery, we offer very short lead times starting from approximately 3 weeks. – All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Horizontal packaging machine, MINI VERSION, for pre-made doypacks, block-bottom bags, or flat pouches. Modules for specific pouch requirements such as zip/press closure, twist closure (spout), and gusset formation can be integrated; optional: batch/date printer, gas flushing module. Pouch detectors check for correct placement and complete opening of the doypack pouch. Immediately after pouch detection, the product is dispensed via the filling spout into the pouch. The sealing area is kept clean throughout the process. A special gripping system securely holds the stand-up pouch in position during filling, before the doypack is closed and sealed. Equipped with MITSUBISHI PLC, SMC vacuum filter, OMRON PID temperature control, AIRTAC cylinders. – Specifications: Stainless steel housing (SS304); max. machine cycle rate (idle): 10 cycles/min; pouch width: 250–450mm; pouch length: 250–500mm; required compressed air: 6.5 bar, 0.2 m³/min; power supply: 220V, single phase; machine dimensions: L1150×W950×H1570mm. Iijdjv Nllrjpfx Aqush Please note that our new machine prices are frequently lower than the typical prices for used equipment. Please feel free to inquire and share your packaging requirements with us. – We generally have 30–50 different new machines available ex stock for immediate delivery. For custom-built machines, we offer very short lead times, starting at approximately 3 weeks. – All machines are supplied with a full warranty.

Stanje: novo, Leto izdelave: 2025, Horizontal packaging machine, MINI VERSION, for pre-made doypacks, block bottom bags, or flat bags in duplex version with higher cycle speed. Modules for specific bag features such as zip/press closure, screw cap (spout), and gusset form can be integrated. Optional: batch/date printer, gas flushing module. Bag detectors check for correct placement and full opening of the doypack. Once the bag is detected, the product is dispensed into the bag via the filling spout. The sealing area is kept clean during this process. A special gripping system holds the stand-up pouch precisely in position during filling, before the doypack is closed and sealed. MITSUBISHI PLC, SMC vacuum filter, OMRON PID temperature control, AIRTAC cylinders. - Specifications: stainless steel housing (SS304); max. machine cycle speed in idle mode: 25 cycles/minute; bag width: 100-300 mm; bag length: 100-350 mm; required compressed air: 6.5 bar, 0.4 m³/min; power supply: 220V, single-phase, 2kW. Ijdpov Nllxjfx Aqujih Please note that our new machine prices are often below the usual used equipment prices. Feel free to send us your inquiry and describe your packaging requirements. - We usually have 30–50 different new machines immediately available from stock. For custom-built machines, we also offer very short delivery times starting from approx. 3 weeks. - All machines are available with full warranty.

Stanje: novo, Leto izdelave: 2025, Filling and capping machine for dosing liquids and pastes into stand-up pouches (Doypacks) with spout and screw cap. The rotary indexing machine is designed specifically for filling all types of liquids, such as water, juices, sauces like soy sauce, salad dressings, tomato sauce, or higher-viscosity liquids including BBQ sauces, honey, as well as semi-solid products like peanut butter, fruit marmalade, or nut-chocolate cream. The filling and capping machine is equipped with six filling heads for liquid dispensing as well as six heads each for positioning and capping the spout closures. The production process is fully automated, from pouch infeed, filling, and nozzle cleaning, to lid delivery via elevating conveyor, screwing on the caps, and discharge of the finished products. Accurate fill volumes are ensured by constant liquid level monitoring. PLC control system, touchscreen operator panel (menu available in various languages, e.g. English, German, etc.). Suitable for pre-made stand-up pouches with side or top spout. Iodpfx Aqjv Nlm Njujih - Specifications: Filling range: 150 ml (can be customized); Number of filling heads: 6; Maximum machine cycle rate (idle): 18 cycles/min (equals up to 108 bags/minute); Power supply: 220/380V, 3-phase, 1.2 kW; Air pressure and compressed air consumption: 5-7 bar, 0.65 m³/min; product-contact parts made of AISI 316 stainless steel, non-contact parts made of AISI 304; Machine dimensions LxWxH: 1800x1150x1950 mm; Weight: 1000 kg. Please note that our new machine prices are frequently lower than typical prices for used equipment. Feel free to contact us with your packaging requirements. — We typically have 30–50 different new machines available from stock at any time. For machines manufactured to customer specification, we offer very short lead times, starting from approx. 3 weeks. — All machines are supplied with a full warranty.

Stanje: novo, Leto izdelave: 2025, Filling and capping machine for dispensing liquids and pastes into stand-up pouches (Doypacks) with spout and screw cap. The rotary filling machine is specifically designed for filling all types of liquids such as water, juices, sauces (e.g., soy sauce, salad dressings, tomato sauce), or liquids with higher viscosity such as grill/BBQ sauces, honey, as well as viscous products like peanut butter, fruit jams, hazelnut spread, etc. The machine is equipped with six filling heads for liquid dispensing and six heads each for positioning and sealing the spout caps. The production process is fully automated from pouch feeding, filling, spout cleaning, cap delivery via elevator, capping, to discharge of finished products. Exact fill volume is ensured by constant monitoring of the liquid level. PLC control system, touchscreen operator panel (menu available in various languages, e.g. English, German, etc.). CIP system and UV sterilization lamp included. Suitable for pre-made stand-up pouches with corner or top spouts. - Specifications: Spout design: double guide ring; filling range: 50 - 500ml (adjustable); number of filling heads: 6; max. machine output rate idle: 16 cycles/min (up to 100 bags/min); power: 2.5kW, 220/380V, 3-phase; air pressure and compressed air consumption: 6-7 bar, 0.7m³/min; product-contact parts are made of stainless steel 316, non-contact parts are stainless steel 304; machine dimensions without pouch feed conveyor: L2600xW1830xH2050mm; pouch feed conveyor dimensions: L2000xW400xH1500mm; weight: 1700kg. Ijdpfxov Nlnas Aqujih Please note that our new equipment prices are often below the usual used equipment prices. Feel free to ask for a quotation and tell us about your packaging application. – We typically have 30-50 different new machines available from stock at all times. For custom-built machines, we offer very short delivery times starting from about 3 weeks. – All machines come with a full warranty.

Stanje: novo, Leto izdelave: 2025, Filling and capping machine for filling liquids and pastes into stand-up pouches (Doypacks) with screw cap (spout). Suitable for pre-made stand-up pouches with side spout (corner spout) or top spout. The rotary system is equipped with 3 filling stations, each with two filling heads for dosing liquids and two heads for positioning and sealing spout caps. Additional features include: Feed elevator for spout caps, external CIP cleaning module, air purification system for internal cleaning of the unit. Electronic components by Schneider and Omron, PLC and touchscreen by SIEMENS, pneumatic components by AIRTAC. - Specifications: Filling range: max. 3000ml; Number of filling heads: 6; Max. idle cycle speed: 26 cycles/min; Power supply: 220/380V / 2.5kW; Air pressure and compressed air consumption: 5-7bar, 0.7m³; Machine dimensions (LxWxH): 2600x1630x1900mm; Weight: 1600kg. Please note that our new machine prices are often below the usual prices for used models. Simply send us your enquiry and let us know your packaging requirements. Iijdpfx Aqsv Nlngsush We usually have 30-50 different new machines available from stock for immediate delivery. We also offer very short lead times from approx. 3 weeks for machines manufactured to your specific requirements. All machines come with a full warranty.

Leto izdelave: 2025, stanje: novo, Horizontally operating, intermittent, gear-driven filling and sealing machine for filling and further processing of pre-made flat pouches or Doypacks without zipper closure. Especially suitable for medium-sized pre-made bags. Integration of various filling systems possible (auger filler, scale, volumetric doser, liquid-, paste- and other dosing units). One bag is processed per production cycle. By default, one dosing unit and one filling hopper are included. It is possible to equip the machine with an additional dosing unit and a second filling hopper to either process two different materials or split the filling operation, thus increasing production speed (particularly relevant for viscous products). Main components: PLC, touchscreen operator panel (menu available in various languages, e.g., English, German, etc.), temperature control. Specifications: Bag size (min.–max.): L(80-310)xW(60-180)mm; max. filling capacity: 1200ml; max. machine cycle rate (idle): 50 cycles/minute; 1.8kW; 12m³/h; machine dimensions: (L)1990x(W)970x(H)1390mm; weight: 700kg. All parts in contact with the product are made of stainless steel (SS304). The pictured dosing units and/or additional optional attachments (e.g., outfeed conveyor or similar) are offered as optional extras for this listing and are shown for illustrative purposes only. The machine is suitable for a wide variety of composite films. We will gladly check and confirm compatibility based on a sample. Iiodpfx Aqjv Nlntjueh The machine/system is also available in other versions for different packaging sizes and packaging speeds. Please note that our new machine prices are often below common used equipment prices. Feel free to contact us and let us know your packaging requirements. 30–50 different new machines are usually available ex stock for immediate delivery. For custom-built machines, we offer short delivery times starting from approx. 3 weeks. All machines are supplied with a full warranty.

Leto izdelave: 2025, stanje: novo, Horizontally operating, intermittent, gear-driven filling and sealing machine for filling and further processing of pre-made flat pouches or Doypacks with zip closure. Particularly suitable for medium-sized pre-made pouches. Integration of various filling systems is possible (auger filler, scale, volumetric dosing, liquid, paste, and other dosing units). One pouch is processed per production step. By default, the machine is equipped with one dosing unit and one infeed hopper accordingly. It is possible to equip the machine with a second dosing unit and a second infeed hopper, allowing either the processing of two different materials or splitting the filling process, which can increase production speed (especially relevant for viscous products). Main components: PLC, touchscreen operating monitor (menu available in several languages, e.g., English, German, etc.), temperature control. Specifications: Bag sizes (min.-max.): L(80-310)xW(60-180)mm; max. filling capacity: 1,200ml; max. idle machine cycle rate: 50 cycles/minute; 1.8kW; 12m³/h; machine dimensions: (L)1990x(W)970x(H)1390mm; weight: 700kg. All parts in contact with the product are made of stainless steel (SS304). Dosing units and/or additional attachment modules (e.g., discharge conveyor or similar) shown in the machine photo are additional options and serve for illustration only. The machine is suitable for a wide range of composite films. We are happy to review and confirm compatibility based on sample materials. Iiodpfsv Nlnysx Aqueh The machine/system is also available in further versions for various packaging sizes and packaging speeds. Please note that our new prices are often below typical used equipment prices. Simply inquire and let us know your packaging requirements. We usually have 30-50 different new machines available from stock for immediate delivery. For custom-manufactured machines, we offer very short lead times from approximately 3 weeks. All machines come with a full warranty.

Leto izdelave: 2025, stanje: novo, Horizontally operating intermittent, gear-driven filling and sealing machine for filling and further processing of pre-made flat pouches or doypacks with a top screw cap. Especially suitable for medium-sized pre-made pouches. Integration of liquid or paste fillers is possible. One pouch is processed per production step. By default, one dosing unit is included, with a corresponding single hopper fitted. The machine can be equipped with an additional dosing unit and a second hopper, enabling either the processing of two different materials or splitting the filling process, which can increase production speed (relevant, for example, with viscous products). Main components: PLC, touchscreen control monitor (menu available in various languages, e.g., English, German, etc.), temperature control. – Specifications: Pouch sizes (min.-max.): L(80-310)xW(60-180)mm; max. fill capacity: 1200ml; max. machine cycle rate without product: 50 cycles/minute; 1.8kW; 12m³/h; machine dimensions: (L)1990x(W)970x(H)1390mm; weight: 700kg. All product-contact parts are made of stainless steel (SS304). Dosing units and/or additional attachments shown in the machine image (e.g., outfeed conveyor or similar) are optional extras for this model and for illustration purposes only. The machine is suitable for a wide range of composite films. We will be happy to check and confirm compatibility with your materials based on samples. This machine/system is also available in additional configurations for various packaging sizes and packaging speeds. Please note that our new prices are often lower than typical used prices. Feel free to contact us and tell us about your packaging requirements. – Normally, 30-50 different new machines are available immediately from stock. For custom-built machines, we offer very short delivery times, starting from approximately 3 weeks. – All machines are available with full warranty. Iiedpfx Aqsv Nln Hjueh

Leto izdelave: 2025, stanje: novo, Horizontally-operating, intermittent, gear-driven filling and sealing machine for processing and filling pre-made flat pouches or Doypacks without zip closure. Especially suitable for large pre-made bags. Integration of various filling systems possible (auger filler, weighing system, volumetric dosing, liquid, paste and other dosing units). One pouch is processed per production cycle. By default, 1 dosing unit is provided with an appropriate product hopper. Optionally, the machine can be equipped with an additional dosing unit and second hopper – allowing either the processing of two different materials or splitting the fill process between two steps, speeding up production (relevant for viscous products, for example). Key features: PLC, touchscreen operation panel (menu available in various languages, e.g., English, German etc.), temperature control. – Specifications: Bag size (min.-max.): L(110-310)xW(90-210)mm; max. fill capacity: 1600ml; max. machine cycle speed (no load): 50 cycles/minute; 4.5kW; 12m³/h; machine dimensions: (L)2700x(W)970x(H)1400mm; weight: 900kg. All product-contact parts are made of stainless steel (SS304). Dosing units and/or add-on modules (e.g., outfeed conveyor) shown in the photos are optional equipment and for illustration only. The machine is suitable for a wide range of composite films; we will gladly check and confirm compatibility based on your sample material. The machine/system is also available in further configurations for different packaging sizes and speeds. Please note that our new machine prices are often below the usual prices for used equipment. Feel free to inquire and let us know your packaging requirements. – 30-50 different new machines are typically available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from approx. 3 weeks. – All machines are delivered with full warranty. Iodpfsv Nln Tex Aquoih

Leto izdelave: 2025, stanje: novo, Horizontally operating, intermittent, gear-driven fill and seal machine for filling and further processing of pre-made flat pouches or zip-closure Doypacks. Especially suitable for medium-sized pre-made bags. Integration of various filling systems possible (auger filler, weighing system, volumetric dosing, liquid, paste, and other dosing units). Two pouches are processed per production cycle, resulting in a higher output per minute. By default, 2 dosing units are provided or required, and correspondingly, 2 feed hoppers are installed. The machine can be equipped with two additional dosing units and feed hoppers, allowing either the processing of two different materials or splitting the filling process to further increase production speed (relevant, for example, for viscous products). Main components: PLC, touchscreen operating monitor (menu available in various languages, such as English, German, etc.), temperature control. Specifications: Bag size (min.-max.): L(110-260)xW(90-180)mm; max. filling capacity: 1200ml; max. machine cycle speed in idle: 55 cycles/minute (equivalent to a max. of 110 bags/minute); 4.5kW; 30m³/h; machine dimensions: (L)5100x(W)980x(H)1400mm; weight: 2000kg. All parts in contact with the product are made of stainless steel (SS304). The dosing units and/or other additional attachments (e.g. discharge conveyor or similar) depicted in the machine photo are optional extras and shown for illustration purposes only. The machine is suitable for a wide variety of laminate films. We are happy to check and confirm relevant compatibility based on a sample submission. Ijdpfx Ajv Nlquequeih The machine/system is also available in other versions for different packaging sizes and speeds. Please note that our new machine prices are often below typical used equipment prices. Feel free to contact us and let us know your packaging requirements. – Typically, 30-50 different new machines are available immediately from stock. For custom-built machines, we offer very short lead times starting from approx. 3 weeks. – All machines come with a full warranty.

Leto izdelave: 2025, stanje: novo, Horizontal packaging machine for the automatic production, filling, and sealing of doypacks (stand-up pouches) with regular or irregular shapes and a corner spout. Particularly suitable for medium-sized operations. Integration of liquid or paste fillers possible. One pouch is processed per production step. By default, the machine is equipped with one dosing unit and one filling hopper. It is possible to upgrade the machine with an additional dosing unit and a second filling hopper, enabling processing of two different materials or splitting the filling process, which can increase production speed (especially relevant for viscous products). Main components: PLC, touchscreen control panel (menu available in multiple languages, e.g. English, German, etc.), temperature control. - Specifications: Pouch sizes (min.-max.): L(180-260)xW(110-180)mm; max. filling capacity: 1200ml; max. machine cycle rate (idle): 50 cycles/minute; 9kW, 15m³/h; machine dimensions: (L)6800x(W)1100x(H)1500mm; weight: 2500kg. All parts that come into contact with the product are made of stainless steel (SS304). The dosing units and/or additional add-on modules (e.g. discharge conveyor or similar) shown in the machine photos are optional extras for this position and are shown for illustration purposes only. The machine is suitable for a wide range of composite films; the films used must have print marks. We are happy to check and confirm corresponding compatibility based on sample materials. The machine/system is also available in further models for different packaging sizes and speeds. Please note that our new prices are often below typical used equipment prices. Feel free to contact us with your packaging requirements. – Typically, we have 30-50 different new machines available for immediate delivery from stock. For machines built to customers’ specifications, we offer very short lead times starting from around 3 weeks. – All machines are available with full warranty. Iiedpfjv Nlrrex Aquoh