Heilbronn 4 Tone Težak Sistem Za Praznjenje/Ravnanje/Krmljenje nakup rabljenega (111.881)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2014, skupna masa: 98 kg, skupna višina: 4.950 mm, skupna širina: 5.100 mm, skupna dolžina: 7.300 mm, Vakuumski sušilnik VS-50 C Notranje mere (DxVxŠ) v mm: 405x340x370 Moč: 230 V 50/60 Hz, 1,52 kW Credpfx Ajqmm Npsc Njc Dodatna vstavljena polica: 1 kos Stroj je iz leta 2014, vendar nikoli ni bil uporabljen. Primeren za sušilne procese pri temperaturah do 200°C z možnostjo priklopa vakuumske črpalke. Vakuumska črpalka ni vključena. Dodatne tehnične podatke najdete v tehničnem listu. Skupaj so na voljo 3 vložene police.

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Parts cleaning system / spray cleaning system type CM13 2-tank (washing + rinsing) including air knife blow-off Basket diameter: 1,300 mm (octagonal) Maximum load weight: up to 1,000 kg Loading and unloading of the basket is performed by the operator using a supply trolley parked/positioned in front of the system (decouplable / mobile). Usable height: 800 mm Washing tank: volume: 430 liters, spray pressure: 6.0 bar Rinsing tank: volume: 280 liters, spray pressure: 4.0 bar Total connected load: approx. 52 kW Control: Siemens S7-1200 with KTP700 touch panel Csdpfxov Tm Ayj Ac Norc Including the following equipment: + automatic water top-up for both tanks + automatic chemical dosing 1-10% (Dosatron) + special spray system (can be switched as required) for small components (= E-Spray System) + side channel blower with height-adjustable airknife system (blow-off drying) + steam/fume extraction incl. condensate return + weekly timer for electric heating + prepared for optional oil separator retrofit + medium filtration via bag filter (manufacturer: Eaton, Topline) in both circuits (washing and rinsing) + outer cladding with stainless steel sheet + entire system fully insulated + tanks separated into two modules; fully insulated (different temperatures possible) + removable filter baskets in the return circuit + stainless steel circulation pumps incl. mechanical seal and soft starter The system is displayed at the Glogar Technology Center and is used exclusively for washing trials.

Stanje: rabljeno, Leto izdelave: 2008, Maks. teža na obesitveno točko: 44 kg Transportna tehnika (krmiljena s frekvenco): 0,6–2,0 m/min Skupna dolžina verige: cca 40.500 mm Razmak členov verige: 270 mm Po naši oceni je lakirna naprava v dobrem rabljenem stanju. Dodatna oprema, prikazano orodje in vpenjala so vključeni le, če je to navedeno v dodatnih informacijah. Csdpfx Aezbvlwsc Njrc Spremembe in napake v tehničnih podatkih in informacijah ter vmesna prodaja pridržane!

Leto izdelave: 1980, stanje: rabljeno, Alignment and welding table, make: PÜSCHEL, year 2010. Table dimensions: Length: 1700 mm x Width: 1700 mm x Height: 760 mm. Tabletop thickness: 30 mm Equipped with adjustment screws. Cjdeq Ru Hxopfx Ac Norc In good condition.

Leto izdelave: 1980, stanje: rabljeno, Welding and straightening table. 2000 mm x 2000 mm, height 800 mm. Crsdoiuia Hspfx Ac Noc

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Max. profile length with 3-sided machining: 7,600 mm, Y-axis travel: 845 mm, Z-axis travel: 620 mm, max. traversing speed X-axis: 63 m/min, max. traversing speed Y-axis: 60 m/min, max. traversing speed Z-axis: 60 m/min, A-axis swivel range: -90°, 0°, +90°, max. spindle speed: 24,000 rpm, spindle power: 11 kW S1, machining directions: top/front/rear/left/right, positioning accuracy: 0.1 mm/m, tool holder: HSK-63F, disc milling cutter diameter: 120 mm, saw blade diameter: 180 mm, software: eluCam, connected load: 30 kVA, compressed air connection: 7 bar, compressed air consumption: approx. 180 l/min, length: 10,775 mm, width: 3,430 mm, height: 2,950 mm, weight: 4.9 t, operating hours: 1,550 h, standby: 6,300 h. Accessories: length measurement for profile bar, HSK-63F tool holder set, five chucks, eight collets, 2-layer length machining with second light barrier, camera system, additional stationary tool magazine for eight tools, barcode scanner for job/machining data input and documentation. Regularly maintained, on-site inspection possible. Csdpfx Acozbb Rre Nerc

Stanje: rabljeno, 1 kos sistem za povezovanje CNP CANAPA 35 Crsdpfsy Tkiiox Ac Nsc 220V Barva: kot prikazano, po slikah in ogledu Dimenzije D/Š/V: 90x60x76cm Stanje: rabljeno

Stanje: rabljeno, Leto izdelave: 2001, Širina pločevine: 1650 mm Debelina pločevine: 0,5-3 mm Število valjev: 21 Hitrost ravnanja: 0-60 m/min Crodpjzafi Nefx Ac Noc Premer ravnalnih valjev: 50 mm Nastavitev: 30 mm Teža stroja: cca 24,5 t Potrebni prostor: cca 4,5 x 2 x 2,8 m Obratovalna napetost: 400 V Prehodna širina: 1720 mm Število nosilnih valjev: 18 Glavni pogonski motor: 45 kW Vstopna višina: 1250 mm 6 HI visokozmogljiv ravnalni stroj z 21 ravnalnimi valji za fino ravnanje jekla in neželeznih kovin. Stroj ima 23 vmesnih valjev in 18 podpor. Digitalna nastavljivost valjev znaša 0,01 mm. Menjalnik je bil obnovljen leta 2021.

Stanje: dober (rabljeno), For sale: individual original deep hole drilling bits from Botek (Germany) – a renowned manufacturer of precision metalworking tools. Single-lip drills with internal coolant supply, made from ultra-hard and wear-resistant K15B carbide. • Diameters from 3.0 mm to 10.2 mm • Working lengths from 150 mm to 480 mm Crodpfowg R I Esx Ac Nec • Internal cooling through the body • Material: K15B micrograin carbide • Suitable for steel, stainless steel, aluminium, bronze, and engineering plastics These drills are designed for precision deep hole drilling with high dimensional stability. Applications include aerospace, automotive, hydraulics, and toolmaking industries. Condition: New and used (previously run), but in good technical condition. Some may require resharpening – an ideal base for professionals. //// PRICE IS PER PIECE /////

Stanje: rabljeno, Stroj za brušenje robov Gartner FLK 4 - rabljeno - vključno z mitro vodilom ----- Tehnični podatki ----- Crjdexd U Uhjpfx Ac Noc Širina brusnega traku: 200 mm, Dolžina brusnega traku: 2.350 mm, Dimenzije delovne mize: 870 x 400 mm, Hitrosti traku: 4, Premer odsesovalnega priključka: 80 mm, Motor: 3 kW

Stanje: novo, Vrtalno-rezalni stroj OPTIMUM OPTImill MB 4 - Razstavni stroj - Ta ponudba se nanaša na paket opreme. V ceno so že vključeni naslednji artikli in možnosti: - Vrtalno-rezalni stroj OPTImill MB 4 Optimum - Podstavek za stroj MSM 3 Optimum - Set vpenjalnih tulec MK 4/ ER 32 - M16 Optimum - Set rezkarjev z ravnim steblom HSS IMUM - Precizni strojni primež FMS 100 Optimum - Nov razstavni stroj - Crsdpfx Acju R Tfto Nec

Stanje: novo, Clean Air Extraction Unit SCHUKO Vacomat 140/160 XPe - Exhibition Model - Motorized filter system, mobile, extraction port can be mounted on either the right or left side ----- Technical Data ----- Certification: H3 / BGHM HO 193023, Extraction nozzle Ø: 1 x 140 / 160 mm, Nominal airflow: 1,447 m³/h, Crsdpfju R Szyox Ac Noc Max. negative pressure: 2,200 Pa, Filter surface area: 9.5 m², Residual dust content: < 0.1 mg/m³, Number of bags: 1 piece, Motor: 2.2 kW, Dimensions (LxWxH): 1,665 x 900 x 1,980 mm, Weight: 306 kg, Dust class M: AWN 16 - New exhibition machine -

Stanje: novo, Vacomats are mobile extraction units designed to remove large quantities of dust and chips in compact spaces. These clean air extraction systems (negative pressure), intended for indoor installation, can be used for single or multi-machine extraction, handling air volumes of up to 10,000 m³/h. Built in accordance with the latest EU standard EN 16770, they are particularly suitable for woodworking shops where special safety requirements apply due to the risk of dust explosion. They are suitable for materials classified under dust explosion class St1. Filter cleaning in the Vacomat XPe is carried out purely electro-mechanically via an efficient shaking motor, which automatically activates once all connected machines are switched off. The control is managed via voltage-free contacts relaying the operating status of the woodworking machines. Motorized shaking control is included in the scope of delivery. Delivery does not include coils. Motorized filter regeneration, mobile design, extraction port can be mounted on either the right or left side, and the unit can be height-reduced for transport. ----- Technical Data ----- Extraction connection Ø: 180 mm Csdpfeu T Hrijx Ac Norc Airflow: 2,610 m³/h Rated airflow: 1,832 m³/h Max. negative pressure: 2,450 Pa Filter surface area: 13.5 m² Residual dust content: < 0.1 mg/m² Number of collection bags: 2 Motor power: 3.0 kW Dimensions (LxWxH): 2,085 x 900 x 2,130 mm Weight: 414 kg Sound pressure level: 76 dB(A) Dust class: M Includes: integrated control cabinet

Stanje: zelo dobro (rabljeno), Edgebander FORMAT 4 Tempora 60.06 glueBox - used Touchscreen Swiveling control panel Program memory Automatic pressure bridge adjustment Feed via transport chain Extendable workpiece support Crodpfx Aceu R S Nwj Noc Diamond jointers for both climb and counter-rotation Glue pot located at the bottom Quick-change glue pot system Suitable for PUR adhesives GLUEBOX system Pressure unit with powered roller Cut-off saw with 2 high-frequency motors Cut-off saw, pneumatically tiltable Flush / radius milling unit Motorized positioning control for milling unit x-motion PLUS Corner rounding unit with diamond-coated cutters Radius scraper blade Radius scraper blade with motorized positioning Flat scraper blade Workpiece-activated flat scraper blade Infeed lock Spraying unit for release agent Spraying unit for lubricant Spraying unit for cleaning agent Year of manufacture: 2022 ----- Technical Specifications ----- Edging thickness, coil material: 0.4 - 3 mm Edging thickness, strip material: 3 - 6 mm Workpiece thickness: 8 - 60 mm Min. workpiece length: 140 mm Feed speed: 10 m/min Screen diagonal: 15 inches Jointers dimensions: D 80 x 64 mm Jointers power: 1.1 kW Cut-off saw power: 0.35 kW Milling station power: 0.75 kW Extraction port diameter: 80 + 160 mm Compressed air connection: 7 - 10 bar Total length: 4,872 mm Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm Weight: 1,500 kg Quality Info: - All settings checked - Adjusted to manufacturer specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Immediately ready for operation

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Mere (dolžina/širina/višina): 1700 x 800 x 2100 mm Število filtrskih vreč: 1 kos Število vreč za ostružke: 1 kos Premer cevi: 160 mm Dolžina cevi: 4000 mm Sesalna zmogljivost: 1850 m³/h Moč motorja: 3 kW Ta odsesovalna naprava je v dobrem stanju, takoj na voljo in jo je možno na mestu prodajalca preizkusiti pod napetostjo. OPIS: - Ciklon predločevalnik z rotacijskim celičnim zapornim ventilom za iztok med delovanjem - Mobilno Cjdpfx Asxcyymjc Norc - Primerno za odsesavanje vnetljivih prahov Dimenzije: Odsesovalec: 1,7 (širina) x 0,8 (globina) x 2,1 m (višina) Predseparacijska enota: 1,1 (širina) x 1 (globina) x 2,8 m (višina)

Leto izdelave: 2006, stanje: kot nova (razstavni stroj), številka stroja/vozila: 31331, DISTILATOR DNP 2000 SEMIAUTOMAT – SISTEM DE DISTILARE CU ABURI PENTRU PROTEINĂ-AZOT Raypa DNP-2000 An fabricație: 2006, neutilizat Distilator pentru proteină-azot bazat pe metoda Kjeldahl. Automat, pentru analiza azotului proteic din probe de materii prime sau materiale procesate, destinat industriei alimentare. Disponibile metode specifice. Rezultatele sunt conforme cu reglementările: EN/ISO, AOAC. Credpfx Aefiliwjc Noc DISTILATOR DE AZOT – DNP-2000 Caracteristici • Douăzeci de programe liber configurabile de utilizator. • Sistemul dispune suplimentar de trei programe fixe: – Test cu sulfat de amoniu. – Preîncălzirea sistemului. – Spălarea recipientului de deșeuri. Avantaje • Kit opțional pentru titrare automată. • Aspirare eșantion. • 20 programe utilizator. • Calibrare pompă de către utilizator. • Generator de abur cu control nivel apă. • Pompă acid boric. • Senzor ușă deschisă. Performanțe • Domeniu de măsurare: 0,1–200 mg N. • Randament recuperare azot: >99,5%. • Reproductibilitate: ±1%. • Timp distilare: 4 min/100 ml. • Consum apă de răcire: 1,2 l/min. • Putere: 2000 W (100%). Parametri și valori programabile • Apă pentru diluție: 0–240 ml. • Soluție OHNa: 0–240 ml. • Soluție H3BO3: 0–240 ml. • Timp reacție (întârziere): 0–30 min. • Timp distilare: 0–30 min sau nelimitat. • Reglarea puterii aburului: 30–100%. Siguranță • Detecție ușă închisă. • Detecție tub digestie. • Termostat supratemperatură. • Utilizare în industria alimentară și oenologie (vinificație). • Documentație: manual de instrucțiuni + garnituri montaj și mufă. • Pentru companiile din România este posibilă vânzarea în rate. Preț: 3.600 Euro + TVA Ex Works încărcat FCA: Oradea/România Ne rezervăm dreptul la erori, modificări și vânzare intermediară. Vorbit cu: vorbim engleză/Wir sprechen Deutsch/Beszélünk magyarul/Nous parlons français/Vorbim româna.

Stanje: dober (rabljeno), Standardni nosilci in dodatki, priključni nosilci, SASSEX spiralni vrtalni rezili, Sassex-spiralna vrtalna rezila, luščenjaška rezila, Sassex-luščenjač, Sassex nosilci, nosilci orodja, vpenjalo za vrtalna rezila, spiralni vrtalniki -Proizvajalec: Sassex, priključni nosilci 4 kosi -Vpenjanje: MK5 -Tip/Velikosti: glej fotografije -Oddaja/Cena: kompletno -Transportne mere: 530/320/V60 mm -Teža: 18,4 kg Crjdpfxozbiq To Ac Nec

Stanje: rabljeno, Leto izdelave: 2020, Overview  This labeling machine was manufactured by Gernep in 2020. The machine is designed for labeling applications in the juice industry. The machine is currently still installed and in operation and can be inspected upon request. Technical Data - Output: 10,000 bottles per hour - Application: Juice - Configuration: Gernep Labetta 4/3/10 640 2A - Labeling technology: Cold glue / Rollina - Labeling stations: 2 × cold glue units Bottle formats Crjdpfx Ajzazkvec Nec - Container type: Glass bottles (fruit juice) - Typical formats: 1.0 l VDF (H=307 mm, Ø90 mm), 0.5 l NRW (H=260 mm, Ø68 mm) - Special suitability: Suitable for hot-fill applications Label data 1st cold glue station: - Label length: approx. 25 – 140 mm - Label height: max. 150 mm - Lower edge: max. 15 mm - Upper edge: max. 320 mm 2nd cold glue station (incl. wrap-around function): - Label length: approx. 25 – 140 mm - Up to 170° wrap around the bottle circumference - Label height: max. 150 mm - Lower edge: max. 15 mm - Upper edge: max. 220 mm Applications: - Body label - Front (chest) label - Back label

Stanje: dober (rabljeno), Naprava za obračanje rezervoarjev, naprava za obračanje kotlov, varilna obračalna naprava, varilna obračalna miza -Izročitev: v obstoječem stanju, kot je bilo ogledano -Nastavljiv menjalnik: manjka, motor OK -Naprava za obračanje rezervoarjev: varilna obračalna naprava -Pogonski motor: 0,4 kW -Nosilnost: 6500 kg -Razdalja med valji: 290 - 940 mm, valji Ø 250 x 145 mm -Hitrost odvijanja: 0,20 do 1,25 m/min v desno/levo -Krmilna enota: ročno upravljanje -Posamezne komponente: poglejte slike -Transportne dimenzije: 1070/835/V800 mm / 1020/680/V3270 mm -Skupna teža: 858 kg Csdoza Udijpfx Ac Njrc

Stanje: rabljeno, Feeding Technology / Feed System / Vibratory Feeder / Sorting Unit / Bowl Feeder Vibratory Bowl, Sorting Unit / Screw Feeding with Vibratory Feeder for Screw Technology Feed System DEPRAG Type: 0611-P/0.75-1S No.: 1183885 Year: 2011 - 2012 The unit was used for feeding electrical connector contact pins. Product dimensions: Ø 4 mm, length 39 mm The pins are preloaded in the material hopper; the feed conveyor supplies the pins on demand to the bowl feeder. From the bowl feeder, the product is fed via a linear feeder to the part turner. The part turner aligns the product to the correct orientation and releases it for further processing. The unit comes from a prototype system; an external electrical control is not included and should be provided via a PLC. Without modification, suitable for automatic and correctly oriented feeding of threaded bolts up to M4 x 40, for example. The unit consists of the following components: 1 piece Belt Hopper / Feed Conveyor DEPRAG Type: B 10 Serial No.: 1178201 Order No: 415050A Year: 2011 Fill volume: 10 liters Belt speed: 100 mm/min. Operating voltage: 24 Volt (DC) - Belt surface dimpled - Foldable stainless steel chute Weight: 11 kg 1 piece Bowl Feeder Vibratory Pot KENDRION Type: OA C006.504101 / OA C006029 / KQF 465 B5 Bowl diameter top: 200 mm Bowl diameter bottom: 100 mm Bowl inner height: approx. 75 mm Sorting track width: approx. 5 to 8 mm Operating voltage: 230 Volt, 50 Hz. 1 piece DEPRAG Vibration Controller for Bowl Feeder Codjkpwuuepfx Ac Norc Type: SZG Controller 6 Manufacturing No.: 35 1 piece Linear Feeder KENDRION Type: WS3B/36 Part No.: WSB003,564025 Operating voltage: 230 Volt, 50 Hz. 1 piece DEPRAG Vibration Controller for Linear Feeder Type: SZG Controller 6 Manufacturing No.: 35 1 piece FESTO Part Turner with 180° swiveling range - 1 piece FESTO Valve Block CPV10-VI 18200 - Compressed air requirement approx. 6 bar - 1 piece MURR Base Module Type MVP12 - Complete unit mounted on a steel plate with 4 support feet Space required (L x W x H): 1150 x 520 x 860 mm Weight: 100 kg Very good condition

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, delovna širina: 615 mm, skupna širina: 3.100 mm, skupna dolžina: 750 mm, skupna višina: 1.135 mm, Certificirano po DGUV do: 06/2027, vrsta vhodnega toka: trifazni, skupna masa: 320 kg, dolžina rezanja (maks.): 600 mm, širina transportnega traku: 615 mm, leto zadnje generalne obnove: 2022, Linija za rezane žemljice Frilado model MSA 80 Ročno polnjenje Upravljanje ene osebe Zgornja plošča iz nerjavečega jekla Csdpfx Asvkthksc Njrc Priključek 400V, vtikač 16A-CEE Rabljena stroj Veliko drugih pekarskih strojev na zalogi!

Leto izdelave: 2025, stanje: novo, Parts Cleaning Machine, Spray Cleaning System Type L122 Fully automatic hot water chamber washing machine with basket drive powered by geared motor, machine housing made of stainless steel 1.4301. - 2 stainless steel 3-sided nozzle systems with stainless steel flat jet nozzles - 2 stainless steel washing pumps (Manufacturer: Xylem/Lowara) - Level control as dry-running protection - 2 suction filters for pump protection Codpfx Aehl Ic Rec Norc - Oil skimmer for bath maintenance - Basket diameter: 1,150 mm - Useful height: 700 mm - Max. loading weight: 300 kg - Spray pressure: 2x 3 bar - Tank volume: 270 liters - Heating: electrically adjustable (room temperature - 60°C) - Electrical connection load: approx. 11.5 kW - Machine dimensions (W x D x H): 1,480 x 1,540 x 2,195 mm

Stanje: dober (rabljeno), Rabljena, komaj uporabljena Nederman naprava za odsesavanje izpušnih plinov za tovornjake in osebna vozila. Crjdpfxszapy Ee Ac Njc Pošiljanje ni možno. Prosimo, ne pošiljajte e-poštnih povpraševanj! Za vprašanja smo vam na voljo po telefonu. Ogled in prevzem sta možna samo po predhodnem telefonskem dogovoru. Pridržujemo si pravico do sprememb, vmesne prodaje in napak.

Stanje: rabljeno, Leto izdelave: 1972, Technical Details: Maximum wire diameter: 12 mm Minimum wire diameter: 2.0 mm Cjdpfx Aeu Ic Hnec Nerc Program control: Process Controller Total connected load: 18.5 kW Approx. machine weight: 10.5 t Machine dimensions (LxWxH): 2.6 x 1.8 x 2.7 m Lubrication system dimensions (LxWxH): 0.6 x 0.4 x 0.8 m Control cabinet dimensions (LxWxH): 0.5 x 1.2 x 2.1 m Coil reel dimensions: 2.6 x 1.8 x 2.7 m WIRE STRAIGHTENING AND CUTTING MACHINE by Wafios-Hack Also referred to as a spring coiling machine, suitable for producing right- and left-hand tension and compression springs. Feed length: 17,400 mm Spring diameter: 120 mm Performance range: Output: 1 – 70 pcs/min Spring diameter: 25 – 200 mm Wire sizes: Round steel Ø 5.0 – 14.0 mm and Square steel 5.0 – 12.5 mm Max. feed speed/spring length: 42,000 mm, Wire feed F1 = 40 m/min, F2 = 28 m/min, F3 = 20 m/min Currently equipped with: 6 wire feed rolls for wire reception Ø 4 mm for producing the final product: tension spring with wire Ø 4 mm, outer Ø 34 mm, length 135 mm Operation via control panel, Process Controller BRANKAMP Equipment: Lubrication unit Wire payoff reel Control cabinet cooler Reel Optional accessories and/or spare parts as shown in photo As is/subject to prior sale.

Stanje: dober (rabljeno), Leto izdelave: 2013, Sorter for light loads, Optimus, SORTATION SYSTEM OPTISORTER HORIZONTAL, 200 trays, configured for 261 destinations – used - : Price sorter incl. control unit: ex location: €99,500 (net), including dismantling, packaging, and loading! Manufacturer: Optimus Sorter Projects B.V. (Bowe Group) Type: OPTISORTER HORIZONTAL Year of manufacture: 2013 • UNIQUE PUSH-TRAY TECHNOLOGY • GENTLE SORTING PROCESS • MODULAR DESIGN Control unit: Siemens S7 Layout: OS-680113-264-D01 System capacity: 6,000 trays/hour Total system length: 53 m Total system width: 14 m Number of infeed stations: 1 Infeed station width: 2 m Number of trays: 200 pcs Usable tray size: 450 x 700 mm Credpfswxu A Rjx Ac Nsc Tray pitch: 520 mm Chute width: 680 mm Number of drives: 3 pcs Product dimensions (L/W/H): Sorter: min: 150 / 120 / 10mm Max: 600 / 400 / 200mm Weight: min: 0.25kg / max.: 5kg No longer available: roller conveyors, pick-by-light, flap elements. At each sorting station there were two outputs, which sorted onto an upper or lower destination roller conveyor via a tilting chute. Total number of sort destinations in the system: the plant had 261 destinations. Number of destinations for special purposes (overflow, reject, etc.): 3 pcs. There is a pick-by-light system at the destination roller conveyor. This means all parts installed after tray dropping in the system flow are no longer available and are therefore not part of the sale! Condition: good Available immediately Location: Warehouse Frankenberg / Saxony Detailed description available on request in PDF (in English).