Stroj za hladno ravnanje pločevine

LORENZ BRM50/1720.21-WD-SW-ZW

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 06007153/001, skupna višina: 6.050 mm, skupna širina: 3.380 mm, skupna dolžina: 3.074 mm, nosilnost na odsek shranjevanja: 210 kg, gradbena višina: 6.050 mm, vhodna napetost: 400 V, Automated Warehouse Optimization Storage System KARDEX Shuttle XP500 System Type: SHUTTLE-XP-500-3050x864 Control: C2000, with B/W OP2000 display Serial No.: 06007153/001 Year of manufacture: 2006 Total Load: 2 x 33,550 kg Load per tray: Medium: 205 kg (evenly distributed) Tray dimensions: 3050 x 864 mm Number of trays: 36 units (more or heavier trays available on request) Shuttle dimensions (W x D x H): 3380 x 3074 x 6050 mm (The height of the Kardex can be adjusted to the available height) Power supply: 3/N/PE 400 V, 11 A, 50/60 Hz, 4.9 kVA This offer is valid as long as the system is unsold. Technical details per Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 36 trays, Medium: 210 kg each, evenly distributed. More or heavier trays available on request. - Tray dimensions: 3050 x 864 mm - Machine dimensions (W x D x H): 3380 x 3074 x 6050 mm - System footprint approx.: 10.39 m² - Capacity with 36 trays: approx. 95 m², each tray is approx. 2.64 m² - Electronic volume measurement system in 25 mm increments (grid) - One access opening with sliding doors for safety of personnel and stored goods - Control C2000, with B/W OP2000 display - LED anti-glare lighting above the access point - Use of toothed belt for minimal noise - Use of toothed belt for the fastest order picking - Distances can be set in 25 mm increments by arranging the support profile, a prerequisite for high-density storage - Weight management controls the tray load - Including light pointer Price: On request via email only Price: excl. VAT, including transport and installation Delivery time: from stock Machinehandel De Leeuw BV specializes in used paternoster systems from Kardex, Hanel/Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automatic storage systems such as Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau Lsdpfx Afoxq Tbte Sshl The Netherlands

Stanje: novo, Leto izdelave: 2026, - Tfon Leveltech® S-3513 izravnalni stroj. - Tfon Leveltech® S-3513 je precizni izravnalni stroj, optimiziran za izjemno tanke materiale, ki združuje napredno elektromehansko upravljanje z enostavnim upravljanjem za dosledne, visokokakovostne rezultate ravnanja. - Ključne tehnične specifikacije: Debelina materiala: 0 – 0,3 mm. Največja širina materiala: 1.300 mm Lhedpfx Afekyrzls Sel Minimalna dolžina materiala: 70 mm Sistem za hitro menjavo ravnalnih valjev: standard. Nastavitev odprtine za izravnavo: elektromehanska / računalniško vodena. Dimenzije stroja (D × Š × V): 2.685 × 1.585 × 1.820 mm. Skupna teža: 5.000 kg.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Löser centreless tube grinding machine - belt grinding machine - centreless tube polishing machine - cylindrical grinding machine Centreless tube grinding/polishing machine for workpieces with a minimum length of 1,100 mm. The machine was built in 1988 and completely overhauled in 2012. During the overhaul, the machine was converted for polishing applications and has since only polished around 10,000 parts. Following that, the machine was taken out of operation. As part of the complete overhaul, all motors, bearings, and the entire control cabinet, including frequency converters, were replaced with new components. The machine is suitable for both wet grinding and polishing. A wastewater treatment unit, including pumps, is currently not available. However, we can retrofit this as per customer requirements. The conveyor systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. Lhedjtmqi Depfx Af Sel The machine can process tube diameters from 10 mm to 160 mm. The grinding/polishing motors offer a power output of 7.5 kW per station. The system can be inspected by appointment in our warehouse at D-63128 Dietzenbach.

Stanje: rabljeno, Leto izdelave: 1995, Technical Details: Sheet width: 3,000 mm Sheet thickness: 12 mm Frame gap: 3,500 mm Control: Cybelec DNC 10 G Back gauge: 1,200 mm, motorized Cutting angle: 1.2 - 2.73° Blade gap adjustment: yes, mm Shearing force: 66,000 daN Blade length: 3,100 mm Hold-downs: 17 units Interface: RS232 Table size: 3,200 x 600 mm Total connected load: 22 kW Approx. machine weight: 11.0 + (1.0 t attachments + accessories) t Space requirements approx. LxWxH: 4.5 x 2.6 x 2.1 m Transport dimensions LxWxH: approx. 5.0 x 2.25 x 2.2 m The guillotine shear was first commissioned in 1998. The DNC 10 G control system was specifically designed for guillotine shears. It features a numerical axis for controlling the back gauge and automatically calculates and regulates the blade gap, cutting angle, and cutting depth based on the material to be sheared (according to the manufacturer's specifications). Table with side stop: L:930 x W:105 x H:42 mm 2 table extensions: L:1,600 x W:100 x H:83 mm Lhodovc Amtspfx Af Sel Angle stop (mounted on table extension) Operation via control panel with pivoting arm and foot pedal Equipment: - Run-out table with rollers for cut material - 2x protective guards

Stanje: dober (rabljeno), Maximum width: 1300 mm Lsdpfxoflvf Aj Af Sjhl Number of rollers: 5 Equipped with shears

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Stroj za ravnanje pločevine, 2100 mm, Ravnanje pločevine, Stroj za ravnanje plošč 2100 mm Rabljeni stroj Maksimalna širina pločevine: 2100 mm (2100x8 mm) Maksimalna debelina pločevine: 10 mm (1500x10 mm) Število valjev: 11 kos Lhedev Tpv Nepfx Af Sjl Premer valja: 95 mm Električni motor: nastavljiva hitrost in smer Električni podatki: 400 V, 50 Hz, 36 A, 22,5 kW Vključen transportni valjčni trak.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2016, Slitter inox 1500x3, manufactured by SAMO OCEMI Completely overhauled in 2016. Technical Specifications Minimum thickness: 0.4 mm Maximum thickness: Up to 4 mm with Rm 400 N/mm² | Up to 3 mm with 700 N/mm² Maximum coil width: 1,540 mm Maximum coil weight: 16 t Direction of feed: left to right Speed: up to 150 m/min Scope of supply · Hydraulic coil car, floor-mounted · Hydraulic expansion decoiler with DC motor, 28 kW, 717 rpm, 2,200 rpm, for dynamic braking and energy recovery. Fixed version. · Disc brake. · Motorised damping roller. · Paper rewinder. · Coil alignment device. · Coil opener with telescopic table. · Feed unit with pinch roll and 3-roll straightener. · Motorised centering unit with 3 flattening polyurethane rolls. · PVC film applicator (new in 2017). · Slitting head, shaft diameter: 200 mm. · DC motor 72 kW 780-2,652 rpm + holding brake. · Turret-type knife loader – 2 pair arms. · DC motor for tensioning roller 23 kW 1,960 rpm + holding brake. · Moveable scrap table with scrap conveyor. · Scrap winder, single drum size 600x600. · AC motor 15 kW with inverter. · Loop table (bypass). · Braking cart (mobile) with:   * Double separator roller   * Deburring roller (new in 2017)   * Felt press   * Braking rollers – with DC motor 33 kW, 2,550 rpm for strip tension adjustment and energy recovery. Lsdpfeymcmfex Af Sshl   * Cut-to-length shear   * Deflector roll · Recoiler, hydraulic expansion, separator arm with automatic lifting system. · DC motor 114 kW 800-2,400 rpm + holding brake. · Coil unloading car, floor-mounted, with pressing arm. · 4 x 20 t turret arm, motorised · Electrical system (NEW in 2016). Power supply voltage: 3x380V. Composed of: Switchgear cabinet: 5,600 x 600 mm. Siemens S7-300 PLC. 3 operator control panels. Main panel with Siemens HMI touchscreen. · Hydraulic equipment. Oil/air cooled hydraulic power unit. Manifolds with solenoid valves on each machine, 24 V DC. · Complete safety fencing, mechanical/optical. · Cutting tools (approx. 160 blades, spacers, separator discs, etc.). Documentation Foundation drawings. Electrical diagrams. Hydraulic diagram. PLC and HMI software. CE Declaration of Conformity. Technical data overview: Minimum thickness: 0.4 mm Maximum thickness: Up to 4 mm with Rm 400 N/mm² | Up to 3 mm with 700 N/mm² Maximum coil width: 1,540 mm Maximum coil weight: 16 t Speed: up to 150 m/min Feed direction: left to right

Stanje: rabljeno, Electric Forklift Truck LINDE Type E25L-01 Serial No. H2X387D01930 Year of manufacture: 2013 Load capacity: 2,500 kg Lift height: 4,700 mm Fork length: 1,600 mm Fork carriage width: 1,150 mm Overall height: 2,200 mm Operating voltage: 80 Volts - Triplex full free lift mast with 1,500 mm free lift - 2x additional hydraulic circuits at the fork carriage for attachments - Battery pack HOPPECKE Type 5HPZS 575, 80 Volt 575 Ah with AQU (new battery from year 2019) - Automatic charger INDATRON, Type D80 Volt / 80 Amp with AQU - 4-wheel superelastic solid rubber tyres, front 225/75-10, rear 200/50-10 - Driver's cab with heater - Hydraulic power steering - 2 LED work lights at the front Lsdpfx Aed Rmx Njf Sehl - 1 LED work light at the rear - 1 LED BlueSpot at the rear - Operating hours counter: 15,995 hours - New TÜV (safety inspection) and UVV (accident prevention inspection) Length without forks: 2,500 mm Overall width: 1,150 mm Own weight: approx. 4,700 kg Good condition

Leto izdelave: 2003, stanje: rabljeno, Complete and fully operational evaporation plant. Lhjdpfx Aecw Idtef Sjl Offered on behalf of a client! If you have any questions, please feel free to contact us.

Stanje: rabljeno, MURATEC WIEDEMANN MOTORUM 2048 CNC REVOLVERSKI PREBIJALEC PROIZVAJALEC: MURATA WIEDEMANN, IZDELANO NA JAPONSKEM MODEL: MOTORUM 2048 KRMILJENJE: FANUC 30i ZASLON NA DOTIK LETO: 2016 KAPACITETA: 20 TON VELIKOST PLOČEVINE (Z ENIM POZICIONIRANJEM): 1250 mm x 2500 mm MAKS. DEBELINA PLOČEVINE: 6,35 mm HOD Y, X: Y-OS: 1360,0 mm Lhsdpfx Afoxvch Te Ssl X-OS: 2550,0 mm NATANČNOST PREBIJANJA: ±0,1 mm GLOBINA VRATU: 1340,0 mm MAKS. DOVOLJENA TEŽA PLOČEVINE: 150 kg HITROST UDARCEV 1.0T – 25 mm RAZMAK, 8,3 mm hod: 355 HPM 0,5 mm RAZMAK, 1,4 mm hod: 900 HPM HITROST SOČASNIH OSI: 125 m/min NATANČNOST PREBIJANJA: ±0,1 mm HITROST INDEKSIRANJA REVOLVERJA: 35 vrt/min STISNJEN ZRAK – KOLIČINA: 100 NL/min PRITISK: 0,5 MPa NAPAJANJE: 19 kVA DODANO: KOMPLET DOBREGA ORODJA EN LASTNIK OD NOVEGA ZELO MALO UR VARNOSTNE OGRAJE