Sistem za čiščenje delov, pralni sistem

Glogar CM 13 - 2 Tank

Stanje: kot nova (razstavni stroj), A demonstration belt grinder WIEGAND with two belt speeds, ideal for steel and stainless steel Nodpfx Aspgmufsgxocr Belt dimensions: 2000 x 150 mm Belt speed: 18 / 37 m/sec Power: 2.2 / 3.8 kW, 400V/50Hz Weight: 110 kg Technical data and dimensions: Subject to change/errors excepted

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, vhodna frekvenca: 50 Hz, temperatura: 60 °C, nosilnost: 250 kg, SUMMA DC3/OSK Rotary Basket / Drum Cleaning System, Carousel Degreasing System with Dryer The chamber rotary machine from the Czech manufacturer operates on the pressure-spray principle. This degreasing unit offers three surface cleaning options and is suitable for the degreasing of a wide range of materials. Manufacturer: SUMMA DC3/OSK Year of manufacture: 2011 Nodpfjwty H Dox Agxjcr Max. workpiece size: 770 x 500 mm Max. workpiece weight: 250 kg Electrical power: 23 kW Bath temperature: max. 60 °C Air temperature: max. 120 °C Bath heating (rinse): 12/6 kW Drying air heating: 13.5 kW Aerosol pressure: 0.28 MPa Pump capacity: 70 liters/minute Machine weight: 520 kg Machine dimensions: 1800 x 1800 mm Height: 1500 mm Do you need more information? We are happy to assist you! Please contact us using the contact form or call us. This listing was automatically translated. Translation errors may be possible.

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Parts Cleaning Machine / Spray Cleaning System Type TR450 The spray-rotation cleaning system type TR450 is an automated cleaning and degreasing unit featuring a lid that opens easily upwards. The system is designed for cleaning single parts and/or bulk materials in baskets sized LxWxH 520x320x200h mm. During the cleaning process, the basket must be closed with a lid. The cleaning result depends on a slight tumbling motion of the parts within the basket when cleaning bulk material; the fill level in the basket must be observed accordingly. Additionally, the unit is equipped with a flood tray beneath the goods basket, allowing for immersion rinsing of the parts, thereby achieving an even better cleaning result. Including the following features: • Fully made of stainless steel 1.4301, inside and outside • Level monitoring and automatic fresh water refill • Full system insulation • Hot air drying (power: 11.6 kW) • Steam vapor extraction • Oil skimmer for bath maintenance • Automatic fresh water refill • 1 small parts basket, 520x320x200h mm, mesh size: 6x6 mm, with height-adjustable locking lid Njdpfx Agsfbt Sijxjcr Connected load: approx. 20 kW (32 amp plug)

Leto izdelave: 1994, stanje: rabljeno, - Letnik izdelave: 1994 - Dokumentacija na voljo: Da Ncsdpfx Agownhl Rjxor - CE certifikat: Ne - Serijska številka: 40640000 - Upravljanje: Konvencionalno Finančne informacije DDV: Navajena cena je brez DDV DDV/Obdavčitev razlike: DDV je odbitna za podjetja Dobava in odkup možna kadarkoli za vse iz industrijskega področja Lukas van Rossum

Stanje: rabljeno, Waste Rollers / Roll Compactor Welger RV 641 Serial No. 1902.01.607 Dimensions: L 1490mm x W 900mm x H 1750mm, Weight 540 kg Nsdpfxov Rpmce Agxocr Bale diameter up to 400mm Bale length 600mm Bale weight up to 30kg Bale Density 250 x 400kg/33 Throughput up to 300 kg/h Feed-in speed 0.36 m/s Binding material: stretch film, 23 µm Roll diameter 250mm Caster and fixed wheels for in-house transport without auxiliary equipment Adjustable operating time via time relay Bale and operating hours counter Continuous fill-level indicator and acoustic full signal Electronically operated bale ejection door Fast binding and ejection of bales (approx. 15 seconds per bale) High throughput of up to 12 bales per hour with bale weights up to 30 kg. Online video inspection possible via WhatsApp, MS Zoom, or Telegram In stock at Emskirchen/Nuremberg – available immediately – test run possible.

Stanje: rabljeno, Leto izdelave: 2023, x-axis travel 3000 mm y-axis travel 820 mm z-axis travel 720 mm Control: Mazatrol Smooth G Spindle taper: SK 40 Spindle speeds: 35 – 12,000 rpm Spindle drive: 15 kW Distance, spindle nose to table top: 140 – 860 mm Table load capacity: 2,500 kg Rapid traverse x/y/z: 50 m/min Table width: 3,500 mm Table length: 820 mm Table height above floor: 870 mm T-slots: 7 T-slot width: 18 mm T-slot pitch: 100 mm Tool changer: 48 positions Tool change time: 4.7 sec Tool diameter with 2 adjacent empty stations: 130 mm Tool diameter with all stations used: 80 mm Max. tool weight: 8 kg Max. tool length: 350 mm Required air pressure: 5 – 9 bar Air consumption: 260 l/min Electrical configuration – voltage/frequency: 400 V / 50 Hz Coolant tank: 500 l Njdpjyvvlujfx Agxjcr Total power requirement: 46.7 kW Machine weight approx.: 15.4 t Space requirement approx.: 5.3 x 3.6 x 3.3 m Standard machine includes the following special equipment: - Preparation for dual oil mist extraction - Air-through-spindle cooling - 48-position tool magazine - Electronic handwheel - 3-color LED signal tower - Additional workspace lighting - Air blast device at the milling spindle - High-pressure coolant supply through spindle, 15 bar - Prepared for MAZAK Monitoring - Chip conveyor discharge to the left (Crowther) - Manual grease gun - Grease cartridge - Mazak API - Drilling cycle with chip breaking - Synchronous tapping - Rapid traverse with constant tilt angle STANDARD ACCESSORIES - Transformer for European market - USB port (1 port) - Mazak standard paint - Workspace lighting SAFETY FEATURES - Operator door with interlock switch - Work area enclosure - Splash guard covers the work area from the side - Fully enclosed workspace - Protection from chips, coolant, and access to the work area during automatic operation - Safety features compliant with global standards COOLANT SUPPLY - Coolant supply through spindle (pump pressure = 5 bar) - Complete coolant system includes pumps, valves, piping, and nozzles for efficient production of quality components. FACTORY AUTOMATION - Automatic start/stop and warm-up function - Automatic warm-up activation via digital timer MEASURING SYSTEM - Tool length measurement and tool breakage detection CNC CONTROL - Horizontally adjustable NC control panel - Relocation Detector - Mazatrol SmoothG control - 19" LCD color display (touch screen) - Mazak tapping/drilling cycle (Mazatrol Tornado) - EIA/ISO data input - Tool path verification in background - 3D coordinate transformation - Compensation for rotary axis errors - Mazacc-2D software (contour correction) - Mazacc-3D software package - MAZACC-3D high-speed software package (NO456) required additionally - High-smoothing control - LAN interface - SD memory card interface - Smooth standard software for M/C - NO443 B) MAZACC-2D software (workpiece form compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Compensation for rotary axes - NO497 D) High-precision control for finishing - Seamless corner control - Variable acceleration control - Ultra-high-speed machining mode - NO498 Rapid traverse corner rounding function - Absolute positioning system - All dimensions, weights, and performance specifications are non-binding - - Used ma...

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2021, obratovalne ure: 850 h, Funkcionalnost: popolnoma funkcionalen, Poleg navedenih in prikazanih strojev imamo na zalogi še veliko drugih strojev in dodatkov (pihalni sistemi, transportni trakovi in majhni stroji). Stroje je možno kupiti ali najeti. Nedpfx Agewfdbcsxecr Za (brezplačno) svetovanje na področju vibracijskega, bobnarskega in peskalnega postopka nas kontaktirajte.

Stanje: rabljeno, Leto izdelave: 2011, obratovalne ure: 21.763 h, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 7.200 mm, skupna širina: 2.950 mm, skupna višina: 3.000 mm, skupna masa: 12.400 kg, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, električna varovalka: 175 A, moč: 105 kW (142,76 KM), A Pero V4 parts cleaning system is available. Basket dimensions (X/Y/Z): 1250mm/850mm/500mm Control system: Siemens S7 Basket feed: automatic Operating hours: 21,763 h, batch counter: 54,211. Ultrasonic cleaning included. Ncedju Ecflepfx Agxor Documentation available. On-site inspection possible. Available from November 2024. Spare parts package included.

Stanje: dober (rabljeno), Clamping plate with grooves, scribing and spotting plate, measuring plate, measuring table, straightening plate, marking plate - Clamping surface: 2995 x 2500 mm Nedendzycjpfx Agxecr - Clamping plate: with grooves, no T-slots - Height: 300 mm - Groove width: 10 mm - Groove spacing: 200 mm - Transport dimensions: 3100/2500/H300 mm - Weight: 5000 kg

Leto izdelave: 2022, stanje: novo, Rotary Tilt Table Load capacity: 1,000 kg (1,200 kg horizontal) with a center of gravity 200 mm from the faceplate Faceplate diameter: 800 mm with 4 T-slots Faceplate rotation speed: 0.05–1.5 rpm Faceplate torque: 1,800 Nm Tilting angle: 0–135° Welding current transmission: 400 A Ncsdjgn Ecrepfx Agxor Operation: Dual-pedal foot switch and pushbutton on control cabinet