Sistem za ekstrakcijo

ESTA Dustomat 61

Stanje: rabljeno, No. 04489 Mobile Extraction Unit / Mobile Dust Extractor ESTA Dustomat 61 Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust class 2, 0.2 mg/m³ Design type 1, for extracting combustible dusts in Zone 22 400 V, 3 kW, with power cable and plug Nominal air flow rate 1850 m³/h Extraction pipe connection diameter 160 mm Filter surface area 9.6 m² Filter cleaning by hand crank Filter dimensions approx. 720 x 510 mm Hjdexnprcspfx Abxonn Chip container 860 x 570 mm Unit is mobile CE compliant Including new spare filter Operating manual available Transport dimensions approx. 1700 x 800 x 2100 mm (LxWxH) Weight approx. 250 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended. Sale in as-is condition Technical data, condition description, year of manufacture, and scope of delivery as per manufacturer brochure or previous owner, without guarantee. Subject to prior sale. For used machines, any warranty is excluded; the following applies: “sold as inspected”. Terms of payment: Prices plus statutory VAT, payment before collection or dispatch. Delivery terms: ex stock

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, obratovalne ure: 55 h, Machine with special rotor Available immediately Advantages: + Special rotor with reduced blade projection, suitable for hard and soft materials + 22 kW motor + Effective square cutters/blades *For pallets: up to a maximum of 10 pallets per hour *Depending on screen and material. Considerably higher throughput with smaller residual wood. Motor: 22 kW; 400 V - 50 Hz - 3 phase Screen: 15/20 mm or as agreed (10 to 40 mm possible) Hydraulically operated pusher Current screen perforation (15/20 mm) *can be exchanged Extraction connection Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: colour of the machine may vary Weight: 1920 kg Standard equipment included: - Control cabinet with PLC control - Automatic star/delta start - High-speed hydraulics - Automatic shutdown when rotor is idling - 70-90 rpm for high throughput performance - Cycle control to prevent idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-dampening machine feet - CE compliant Hjdpex Af Rdsfx Abxsnn The following options are available at an extra charge: - Raise the shredder by 30 cm (prepared for conveyor belt) + €2,480 net - Angle conveyor (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €6,980 net - Control for conveyor and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - Enlarged hopper extension 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 25% - Material feed must be free from metals and mineral impurities. Damage to the tools and/or increased wear may result.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, Rabljena Andritz Paladin 600B Vključuje kombiniran nerjavni dozirni polž in mešalnik, Hsdpfx Asx N T Uaobxsnn 2 x 55 kW motorja, drugi motorji po dogovoru Notranjost pregledana pred 2 leti Vključen okvir za menjavo valjev in matric

Stanje: novo, Leto izdelave: 2024,

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Popolna linija za briketiranje 2 x RUF 330. Kotlovnica, bobnasti sušilnik, transporterji. Hjdpexazhtefx Abxenn

Leto izdelave: 2014, stanje: dober (rabljeno), For sale: Nilfisk Compact Industrial Safety Vacuum Cleaner Model CTS40 M Z22 400 V 4 kW 9 A 50 Hz 114 kg ATEX-certified (explosion proof) The vacuum cleaner is in good condition and ready for immediate use. Machinery buying/selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you in need of a high-quality, yet affordable metalworking machine for your manufacturing operations? Or are you looking to sell your equipment? Hnedpfjhu Sf Hex Abxon For more information or ways to contact us, please visit our website.

Leto izdelave: 2021, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: nepreverjeno, Basic package Selector 800 Sub-belt BB 1350 mm AA 6.4 m Hnodpovm Upnofx Abxjn -profiled belt- SPIRAL SHAFT SCREEN DECK AA254-150 - 16 shafts

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: HBC 140 2x75kW 2001 (210-008-01), stiskalna sila: 155 t, teža bale: 1.500 kg, pritisk: 250 letvica, moč: 150 kW (203,94 KM), leto zadnje generalne obnove: 2024, Oprema: dokumentacija / priročnik, Verkocht door Bollegraaf Recycling Solutions, de originele fabrikant van deze Bollegraaf-pers en transportband: Bollegraaf HBC140s Kanaalbalenpers (2x75kW). Pers: Gewicht: 47.100 kg Bouwjaar: 2001 Variabele kanaaldrukregeling Hnsdpfx Abstvau Aoxen Kunststof ventiel Anti-ratten bekabeling Draaiuren: 0 na volledige revisie Deze pers wordt volledig gereviseerd verkocht volgens de 'Bollegraaf OEM Certified Refurbishment standards', inclusief 2 jaar garantie. Neem contact met ons op voor meer informatie of een offerte. Algemene principes van revisie Reiniging & demontage Voordat de feitelijke revisie plaatsvindt, wordt de pers volledig gereinigd en gedemonteerd in onze revisiewerkplaats. Toleranties Na demontage worden de toleranties van alle stalen componenten gemeten en opnieuw gelast waar nodig. Dit geldt ten minste voor de volgende onderdelen: • Persplunjer, • Frame, • Perskanaal, • Voorpersklep Na demontage en inspectie wordt de persplunjer opnieuw opgelast en voorzien van nieuwe plunjerwielen. De beschermroosters en de voorpersklep worden deukvrij gemaakt en waar nodig gerepareerd. Opnieuw gespoten Na het meten van de toleranties en alle benodigde reparatie- en laswerkzaamheden, worden alle onderdelen gestraald en opnieuw gecoat. Hydrauliek: De hydrauliektank wordt gereinigd. De hydrauliekleidingen en -slangen worden vervangen. De hydraulische componenten worden opnieuw verpakt. De hydrauliekolie wordt vervangen. Bekabeling: Alle bekabeling wordt gecontroleerd en indien nodig vervangen. Alle aansluitkasten worden vervangen en teruggeplaatst op goed toegankelijke plekken. Slijtdelen: Alle slijtdelen worden vervangen. De pennen en assen van de cilinders en het perskanaal worden vernieuwd. Alle slijtdelen van beide naaldinstallaties en knopers worden vervangen door nieuwe. Cilinders: De cilinders worden opnieuw verpakt en indien nodig voorzien van een nieuwe chroomlaag of een nieuwe cilinderstang. MCC Kast De schakelkast wordt gecontroleerd en schoongemaakt. Indien nodig worden elektronische componenten vervangen door nieuwe. De PLC en HMI (mens-machine-interface) worden vervangen door de nieuwste Schneider M340-versie, inclusief de meest recente software.

Leto izdelave: 2019, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), številka stroja/vozila: MISCO1082,

Stanje: rabljeno, No. 3176 WEINIG Hydromat 1000 Planing and Moulding Machine Used, year of manufacture 2007 6 Spindles: bottom-right-left-top-top-bottom Electronic feed: 6 - 60 m/min Working width: 80 - 150 mm Working height: 23 - 65 mm Finished lamella width: 4 - 15 mm Max. number of lamellae: 16 pcs Lamella lengths: 400 - 4000 mm 1st spindle horizontal bottom: Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool circle 125 - 180 mm 2nd spindle vertical right: Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool circle 112 - 250 mm Max. profile depth 35 mm Axial adjustment 80 mm 3rd spindle vertical left: 7.5 kW, 6000 rpm Diameter 45 mm Tool circle 112 - 250 mm Max. profile depth 35 mm Axial adjustment 80 mm Pressure shoe in front of spindle, swiveling, pneumatic roller pressure 4th spindle horizontal top: 15 kW, 6000 rpm, diameter 45 mm Tool circle 112 - 250 mm Max. profile depth 35 mm Axial adjustment 45 mm Divided pressure shoe before upper spindle, adjustable and swiveling, pneumatic 5th spindle horizontal top as saw spindle: Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment reduced to 25 mm Tool circle 112 - 250 mm Max. cutting depth 35 mm Axial adjustment 45 mm Divided pressure shoe before upper spindle, adjustable and swiveling, pneumatic 6th spindle horizontal bottom as saw spindle: Brake motor 30 kW, 5000 rpm Axial adjustment reduced to 25 mm Diameter 45 mm Tool circle 112 - 250 mm Max. cutting depth 35 mm Axial adjustment 45 mm All profiling spindles with high-performance bearings Electronic feed 7.5 kW Adjustment travel of feed rollers opposite left spindle, axial 35 mm Shortened roller distance opposite right spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in table, lateral pressure roller Automatic Waxilit/lubricant pump Machine with 4-roller outfeed, oscillating shafts extended to 200 mm 2 driven, toothed rollers in outfeed table 2 driven, toothed rollers in machine table Pressure beam ahead of and discharge after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electric height adjustment of upper spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transport and installation Subject to errors in description and price Transport and loading by us available as an option To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended The sale is made in "as is" condition Hedpju Agh Ssfx Abxjnn Technical data, description of condition, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: "sold as inspected" Pictures and videos are for illustration purposes only and do not represent the actual scope of delivery Terms of payment: prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex site