Heilbronn 4 Tone Težak Sistem Za Praznjenje/Ravnanje/Krmljenje nakup rabljenega (112.667)

Stanje: rabljeno, Hydraulic Parallel-Motion Press, Spotting Press AGEO Type GHP 200 H6 4-Column Hydraulic Press, Tool Trial Press, Spotting Press Serial No. 21169 Year 1993 Bdsdowva I Hopfx Acmoc Pressing force: 200 tons Clearance between uprights (front): 1200 mm Side opening between uprights: 650 mm Table size: 1560 x 1010 mm Ram area: 1560 x 1010 mm Ram stroke: 575 mm Draw cushion stroke: 300 mm Draw cushion holding force: 63 tons Draw cushion ejector force: 30 tons Max. daylight: 775 mm Table height above floor: 1000 mm Guide column diameter: 140 mm Clamping pin bore on ram: 64 mm Pressing speed: 0 to 10 mm/s, infinitely variable Return speed: 0 to 20 mm/s, infinitely variable Main motor power: 22 kW Control pump motor power: 5.5 kW Electrical connection: 400 Volt, 50 Hz - Table and ram with 22 mm T-slots - Two pressure cylinders with electronic precision parallel-motion control - Infinitely variable electrical stroke limitation (upper and lower, with digital travel measurement and position display) - Mechanical safety upholding device (prevents ram from lowering due to its own weight) - One-hand and two-hand operation - Electrical tool safety via signal contact - Pressure preset independent of stroke (via keyboard, digital pressure display) - Travel measurement system left and right with rotary encoders - Electrical control: MS-DOS PC with Ageo H v2.23 control software - Operator panel with swivel-mounted screen - Stroke movement and press speed controllable via joystick - Separate hydraulic unit with electrical cabinet - Hydraulic draw cushion under press table - Draw cushion with ejector function - Continuous stroke control - Floor-level installation - Electrical oil temperature monitoring - Operating manual with circuit diagrams Space required for press, upright: L x W x H = 1800 x 1010 x 3470 mm Space required for horizontal transport: L x W x H = 3500 x 1800 x 1200 mm Press net weight: 13 tons Space required for hydraulic unit: L x W x H = 1000 x 800 x 3040 mm Hydraulic unit net weight: approx. 1 ton The machine was used as a tool trial press in a toolmaking facility. Very good condition.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Sheet width: 2050 mm Sheet thickness: 6.0 mm (steel) Pre-bending: 5.0 mm (steel) Top roll diameter: 170 mm Side roll diameter: 165 mm Lower roll diameter: 135 mm Control: SIEMENS Oil capacity: 80.0 liters Voltage: 380 V Total power requirement: 7.5 kW Weight: 3450 kg Dimensions (machine only): 3750 x 1170 x 1000 mm Condition: Very good (!!) Current new price incl. accessories approx. 70,000 euros Special price on request Bedoy Uy R Sjpfx Acmsdc The FACCIN 4HEL series is considered one of the most precise, reliable and productive electronic 4-roll plate bending machines worldwide. It has been specially developed for high batch production and maximum accuracy on medium to thicker material gauges. Equipment: - Heavy-duty electro-hydraulic 4-roll plate bending machine * with linear guideways for the rolls * side rolls move up and down on a straight, diagonal axis * extremely short distances between the rolls for improved pre-bending quality - 4-roll concept allows for highly versatile bending and rounding options - Freely movable control unit * numerical SIEMENS control with touchscreen * controls for all rolls and machine axes * digital position display for the side rolls * manual operation via electric buttons possible - Infinitely variable bending speed - Top and lower rolls driven by hydraulic motors with planetary gearboxes * active rotation = side rolls rotate freely - Conical bending possible by tilting the rolls * max. material thickness is reduced by approx. 50-60% when cone bending - Electronic parallelism system (EPS) for the rolls - Double-sided pre-bending - Pre-bending diameter up to 1.1 times the top roll diameter possible (for thinner materials) - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, robust machine design - Stable welded steel construction - Electro-hydraulic drop-end for easy removal of finished pipe sections - Manometer / pressure gauge for the rolls - Safety device (safety line with switch unit) - Manual central lubrication - Operating manual with wiring diagram and CE declaration included

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, Na voljo je precizni stroj za ravnanje pločevine. Širina materiala: 1500 mm, debelina materiala: 1-2 mm, primerno za: aluminij, krmiljenje: Siemens Simatic OP177B. Opremljen s transportnim valjčnim stojalom. Dodatno so na voljo rezervni deli: Siemens krmilna enota 24V DC (6SL3040-1NB00-0AA0), Siemens kompaktni asinhronski motor 15 kW (1PH7133-2DF02-0BA0), Siemens sinhronski servomotor (1FK7042-5AK71-1KG0), Siemens Sinamics Basic Line Module (6SL3130-1TE22-0AA0), Siemens Simatic Panel OP177B, INA valjčne roke. Teža: pribl. 6700 kg, skupne mere X/Y/Z: pribl. 2400 mm/1600 mm/1800 mm. Ogled po dogovoru možen. Bjdpfxsy Uyfvj Acmsdc

Stanje: dober (rabljeno), *MOŽNOST NAJEMA* RAZTOVORNI SISTEM ZA PREVLAČNE POLPRIKOLICE Za raztovarjanje, doziranje in pnevmatski transport različnih razsutih materialov, kot so npr. nadomestna goriva, lesni sekanci, živalska krmila ipd., sestavljen iz: Bodeza Ilaopfx Acmsdc - 1 kos raztovorne postaje s senzorji nivoja ter volumetričnim dozirnikom - Hidravlični sistem za samodejni raztovor iz prevlačnih polprikolic - Verižni transporter za iznos materiala - Celilni ventil za priklop na pnevmatski transport - Puhalo za pnevmatski transport Ta stroj je na voljo za nakup ali najem. Možen je tudi najem z odkupom. Dodatne informacije in slike so na voljo na zahtevo.

Leto izdelave: 2014, obratovalne ure: 9.544 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1400040735, Maksimalna dužina obrade: 7.720 mm bez obrade čeonih strana Maksimalna dužina obrade: 7.600 mm sa obradom čeonih strana X-os hod: 7.720 mm, maksimalni posmak 63 m/min Y-os hod: 845 mm, maksimalni posmak 60 m/min Z-os hod: 620 mm, posmak 60 m/min A-os opseg nagiba: -90° 0° +90° Smer obrade: odozgo/napred/nazad/(levo/desno) Poziciona tačnost: +/- 0,1 mm Snaga vretena: 11 kW; S1 vodeno hlađeno Obrtaji vretena: maks. 24.000 o/min Prihvat alata: HSK 63 F Menjač alata: automatski Pozicije za alat u magacinu: 8 mesta Automatski menjač alata za ugaonu glavu: 1 mesto Prečnik disk freze: 120 mm Bdedpfxjza D Scj Acmec Dužina alata (od konusa): 150 mm Automatsko pomeranje stegača Stegači: 8 komada Operativni sistem: Windows Proizvodni softver: EluSoft, EluCAM Priključak za komprimovani vazduh: 7 bara Električni priključak: 400 V, 3 faze, 50 Hz, 25 A Potrošnja vazduha po minutu: cca 185 l sa prskanjem Potrebna površina (D x Š x V): 11.240 mm x 3.400 mm x 2.950 mm Težina: 8.200 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Sheet width 3100 mm Sheet thickness 6.0 mm (steel) Pre-bending 4.0 mm (steel) Upper roller diameter 200 mm Side roller diameter 165 mm Lower roller diameter 190 mm Bending speed approx. 5.0 m/min Control system DIGI Oil capacity 80.0 liters Voltage 380 V Total power requirement 6.0 kW Weight 6000 kg Dimensions (L-W-H) 5250 x 1500 x 1400 mm Very good condition (!!) Current new price approx. €85,000 Special price on request Features: - Robust electro-hydraulic 4-roll plate bending machine * 4-roll design offers a wide range of bending and rolling options - MG swiveling control panel * Operation – control of all rollers / machine axes * Digital position display * Manual operation via joysticks - Two central rollers driven directly by hydromotors - Conical rolling possible by tilting the rollers Bedpfxex Sr Dfj Acmedc - Side roller parallelism by torsion shafts - Pre-bending on both sides - Diameters up to 1.1 times the upper roller diameter possible - Forged and hardened rollers with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Continuous lubrication of all bearings - Sturdy steel welded frame - Electro-hydraulic drop end for easy removal of tubular workpieces - Pressure gauge for rollers - Safety device (safety cable with switch unit) - Operating manual (PDF)

Leto izdelave: 2024, stanje: novo, Everything can be configured according to your wishes, with very short production and delivery times. We are happy to provide you with further information upon request. Technical data available on request. Standard Equipment: - Welded steel construction Bdedpfx Acefirx Nemsc - DURMA CNC control unit (AURORA) - Remote diagnostic (Ethernet) - Lantek software with automatic nesting - Positioning of the sheet metal to be cut using laser - DURMA torch height control - Double-sided drive system (rack and pinion) - AC servomotors for X and Y axis movement - CNC input/output for filter unit - Starter kit for consumables - Plasma torch * - Ignition console * - Torch height control with ball screw drives on double linear guides * Optional Equipment: - Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch - Hypertherm HPR 130 XD + hose package + nozzles + Durma THC + ignition console + Hypertherm torch - Hypertherm HPR 260 XD + hose package + nozzles + Durma THC + ignition console + Hypertherm torch - Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + torch - CE-compliant safety wire - Automatic gas console for Hypertherm - Manual gas console for Hypertherm - Oxy-fuel cutting torch - Plasma torch protection system - Manual plasma bevel cutting head - CNC bevel cutting head (+/- 45°) - Single drilling head - Multi drilling head - Filter for 130A, 260A or 400A - Tube cutting unit Ø50 mm - Ø400 mm - Additional support for tube cutting unit - Warning lamp for errors and program end With more than 60 years of experience in the research and production of sheet metal processing machines, producing 8,000 machines annually in three technologically advanced manufacturing facilities covering a total of 150,000 m², the Durmazlar Group and its DURMA machines are today among the internationally recognized manufacturers in their sector, with products distributed in 120 countries worldwide. With our branch in Staufenberg near Giessen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact from Durmazlar, providing you with expert advice and support on all sheet metal processing machinery. Our demonstration center gives you the opportunity to gain an overview of our machines on site, experience first-hand the quality and precise technology of our products, and receive the best possible consultation tailored to your corporate objectives. Our mission is to be your on-site point of contact and to offer you comprehensive services including training and after-sales support. We are happy to assist you from Germany—beginning with consultation, through the purchasing process, and throughout the entire lifespan of your machine. With our German branch, we are always locally available to respond quickly and efficiently whenever you need us. We are your reliable partner for technologically advanced solutions in sheet metal processing.

Leto izdelave: 2022, obratovalne ure: 200 h, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, AirBasic je prenosni stroj za ločevanje lahkih in težkih sestavin različnih sipkih materialov. Stroj je kot nov in je bil zelo malo uporabljen. Navodila za uporabo in tehnični listi so na voljo v obliki PDF. Bedpfx Acsyddazomjdc

Stanje: rabljeno, Leto izdelave: 2004, OVERVIEW This Krones KES-2-4-312/25-110 bottle washer is designed for the industrial cleaning of returnable glass bottles in beverage bottling plants. The machine is configured for 25 bottles per row and offers a nominal capacity of up to approx. 28,000 bottles per hour. The unit can process bottle formats ranging from 300 ml to 1,000 ml, making it suitable for breweries, mineral water producers, soft drink manufacturers, and other operations using returnable bottles. Constructed predominantly from stainless steel, it features an insulated stainless steel caustic bath and a steam heating system. The machine is delivered fully refurbished. The refurbishment scope includes the bottle infeed and outfeed, the heating system, pumps, main chain, valves, piping, spray nozzles, label removal station, and control cabinet. A test run is included. The machine comes with a Siemens S7 PLC and is offered as a general overhauled unit at a special price. TECHNICAL DATA Manufacturer: Krones Model: KES-2-4-312/25-110 Bdedpfjy Ul N Hex Acmoc Type: Bottle Washer Year of manufacture: 2004 Capacity: approx. 28,000 bottles/hour Bottle rows: 25 bottles per row Bottle formats: approx. 300 ml to 1,000 ml Control: Siemens S7 PLC Heating system: Steam heating Construction: Predominantly stainless steel, insulated stainless steel caustic bath Bottle cell spacing: 110 mm Material of machine cells: Polypropylene Bottles per carrier: 25 units Total number of bottle carriers: 274 units Minimum control range: approx. 12,000 bottles/hour Maximum control range: approx. 35,000 bottles/hour Power supply: 400 / 230 V, 3-phase, 50 Hz Control voltage: 24 V DC Empty weight: approx. 45,000 kg Operating weight: approx. 87,000 kg Machine length: approx. 11,766 mm Machine width without attachments: approx. 3,136 mm Machine height without ground clearance: approx. 3,200 mm Water consumption in operation: approx. 6.38 m³/h Water consumption per bottle: approx. 0.22 l Main chain: approx. 4 years old, refurbished Scope of refurbishment: bottle infeed and outfeed, heating system, pumps, main chain, valves, piping, spray nozzles, label removal station, and control cabinet Test run included Terms of delivery: EXW, unpacked

Leto izdelave: 2016, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Avtomatski zlagalnik Timme z magazinom za letve. Premični voziček s hidravlično dvižno mizo, krmiljenje Siemens S7. Dolžine do 6,0 m. Zelo malo uporabljen, na voljo zaradi prestrukturiranja. Video prikaz delovanja stroja vam lahko z veseljem pošljemo. Bedpfx Aoy S Ucwecmedc

Stanje: pripravljen za uporabo (rabljen), Technische Daten: Geschwindigkeit – 130 m/min, Baujahr – 2006, Auslauftisch – 6 m, Drahtdurchmesserbereich: 4–12 mm. Bodpfx Acotndgpemedc

Leto izdelave: 1997, stanje: generalkompletno obnovljen (rabljeno), Tehnični podatki: - Hitrost: 90 m/min - Moč: 20 kW – dva motorja - Prenova: 2018 - Iztekalna miza: 6 m - Razpon žice: 2–12 mm - Rezalna enota: leteči noži Bdedpfx Acjdz S Tvjmec

Leto izdelave: 1980, stanje: delavnici obnovljeno (rabljeno), Tehnični podatki: Bdodpfx Aohqfl Aocmec Območje premera žice: 4–14 mm Dolžina reza: 8,5 m Hitrost: 70 m/min Prenova: 2022

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1994, Min.-maks. premer žice: 6 do 14 mm (.236″ do .551″) Leteče rezilo (5) indeksirajočih rotacijskih vreten Bsdpfx Acefkmr Ssmjdc (4) predhodni podajalni valji 80 do 120 metrov/minuto Maksimalna dolžina reza: 15 metrov tir Indeksirni zbiralnik žic/palic 30 kW (40 KM) AC motor Hidravlični motor: 15 kW (20 KM) Operaterska kontrolna plošča; 380 V – 50 Hz – 3-fazni PLC krmiljenje SIEMENS S5 3 vertikalne odvijalne enote Popolnoma obnovljen stroj

Leto izdelave: 1985, stanje: rabljeno, Razpon žice: 2–6 mm Odvodna miza: 1 m (lahko je daljša) Hitrost: največ 90/min Električna moč: 8 kW Avtomatski odvijalec žice: največ 800 kg Stroj je v zelo dobrem stanju in je bil obnovljen leta 2017. Bdodpfxjdqubqo Acmsc

Leto izdelave: 1985, stanje: delavnici obnovljeno (rabljeno), Technische Daten: Drahtdurchmesserbereich: 4–12 mm Bodoh In Thopfx Acmjdc Gscxckebw Ablauftisch: 4 m Geschwindigkeit: 80 m/min Generalüberholung: 2022

Stanje: rabljeno, S to ponudbo pridobite rabljeni sistem za izdelavo brošur "Plockmatic PBM500". Predmet prodaje: Bdodpsudv T Rsfx Acmjc 1 x Plockmatic PBM500 Stanje: Ponujena naprava je rabljena in lahko kaže znake uporabe (manjše praske ali porumenelost). Naprava je bila preizkušena za funkcionalnost. Pakiranje in dostava: Napravo si lahko ogledate v času našega poslovanja. Za ogled se prosimo predhodno dogovorite! Pomorsko varno pakiranje in svetovna dostava sta na zahtevo možna! Pred odpremo ali prevzemom bo opravljen in posnet funkcionalni test. Za dodatne informacije se lahko tudi osebno obrnete na nas.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, Rex RKS 85 | Sausage Hanging and Twisting System Manufacturer: REX Technologie GmbH & Co. KG Model / Type: RKS 85 Serial Number: 2130216 Year of Manufacture: 2016 Power Supply: 400 V / 50/60 Hz Current Protection: 3x 16 A Overall Dimensions: 1450 x 660 x 1400 mm The Rex Technologie RKS 85 is a high-performance, automatic sausage twisting and hanging system (longitudinal calibrating), designed as a peripheral device to work directly with vacuum fillers. The 2016 unit represents a key element in automating production processes in medium and large-scale sausage production facilities. The RKS 85 system is responsible for the precise, repeatable portioning of sausage strands into uniform sections (in natural, artificial, or collagen casings), followed by automatic loop forming and precise placement onto hooks—for easy transfer onto smokehouse rods. The machine minimizes the risk of casing breakage and guarantees a constant weight and identical length of each individual sausage. Bdedpfx Acsy Uchmemsc Key features and benefits: - Precise portion control and calibration: An advanced belt-driven feeding and portioning system gently yet securely grips the filled casing, eliminating air pockets inside the sausage and ensuring an ideal appearance of the final product. - Versatility and quick retooling: The machine efficiently handles a wide range of sausage calibers and lengths (from thin kabanos to traditional grill sausages or frankfurters). Product parameters and assortment can be easily changed via the vacuum filler’s control computer or the machine’s control panel.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, trajanje garancije: 6 meseci, skupna širina: 505 mm, skupna dolžina: 1.010 mm, skupna višina: 500 mm, Certificirano po DGUV do: 06/2027, vrsta vhodnega toka: trifazni, skupna masa: 49 kg, širina transportnega traku: 100 mm, leto zadnje generalne obnove: 2026, Broma stiskalnik za mlečne žemljice Bsdsidp Nmepfx Acmjdc Stiskalnik za mlečne žemljice / koščke testa ... kot ročno! Za ročno rokovanje / enosebno upravljanje Nastavljiv pritisk Dolgi izhodni trak Namizna naprava Samo pri nas preizkušeno po DGUV V3 Priklop 400V, vtič 16A-CEE Rabljeni stroj, obnovljen in pregledan s strani SAB Z garancijo + servisom Možnosti: Vzdrževalna pogodba Dostavna storitev Obiščite našo veliko razstavo pekarskih strojev!

Stanje: rabljeno, v celoti iz nerjavečega jekla premičen Bdsdpfx Aezaar Eocmjc brezstopenjska hitrost z odpihovalno napravo širina tira 600 mm dimenzije (D × Š × V): ± 3.250 × 1.000 × 2.000 mm

Stanje: rabljeno, Leto izdelave: 2022, Volumski pretok: 18.000 m³/h, aktivna filtrirna površina 237,6 m², izpust kondenzata, za 10 obdelovalnih centrov, postavljen na lastno izdelano jekleno ogrodje nad vhodnimi vrati hale, kompletno s cevovodom, izdelanim po merah prostora, kot dovod do posameznih CNC obdelovalnih centrov, vmesna prodaja pridržana. Bsdpfx Acjy T Nxvjmjdc

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, New unit with 12-month warranty Advantages of chilled ice water: + Consistently low water charging temperatures + Precise dough temperature control all year round + Rapid swelling during mixing without the need for ice + Softer doughs thanks to freshly chilled, liquid ice water + Precise dosing possible with water mixing and dosing devices + All water-conducting parts are made of stainless steel and require no cleaning + Hygienically flawless, clean drinking water Langheinz ice water systems feature: + Constantly low water temperatures + High-performance refrigeration units + Refrigeration systems with expansion valves + Electronic ice bank controllers + Stainless steel refrigeration evaporators + Multiple stainless steel water heat exchangers + Insulated stainless steel ice water bath + Drain tap in the ice water bath + High flow capacity + Compact dimensions + Easy-to-clean surface texture + Low energy consumption SPECIAL accessories, optionally available for an extra charge: - 3-way changeover valves --- for water mixing and dosing units with only two inlets (cold / hot) + €349,-- net Technical data: - Batch size (recommended): up to 70 litres - Continuous capacity*: 230 litres / hour - Peak cooling capacity*: 500 litres / hour - Ice bank: 60 kg - Cooling capacity (CECOMAF): 3.978 kW - Electrical connection: 400 V - 50Hz - 1Ph Bjdoivdv Depfx Acmodc - Power consumption: 2.84 kW - Water connection: 1/2 inch - Water flow at 2 bar: 25 litres / min - Dimensions: 1170 x 630 x 770 mm (LxWxH) - Net weight: 145 kg - Energy consumption per 100 litres: 1.5 - 2.5 kWh * at inlet temperature +17.5°C and outlet temperature +2.5°C

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, New unit with 12-month warranty Advantages of chilled ice water: + Consistently low discharge water temperatures + Precise year-round dough temperature control + Rapid hydration during mixing without ice + Smoother doughs due to freshly chilled, liquid ice water + Accurate dosing possible via water mixing and dosing unit + All water-bearing components made of stainless steel, maintenance-free + Hygienically flawless, clean drinking water Langheinz ice water systems feature: + Consistently low water temperatures + High-performance refrigeration units + Refrigeration systems with expansion valve + Electronic ice bank controllers + Stainless steel evaporators + Multiple stainless-steel water heat exchangers + Insulated stainless steel ice water bath + Drain valve in the ice water bath + High flow capacity + Compact dimensions + Easy-to-clean surface structure + Low energy consumption OPTIONAL special accessories, available at extra cost: - Stainless steel wall bracket (for models L130 + L170): + €499 net - Machine table (for models L130 + L170): + €589 net - 3-way changeover valves --- For water mixing and dosing units with only 2 inlets (cold / warm) + €349 net Technical data: - Batch size (recommended): up to 50 liters - Continuous output*: 115 liters per hour - Peak cooling capacity*: 330 liters per hour - Ice bank: 40 kg - Cooling capacity (CECOMAF): 1.86 kW - Refrigerant: R290 (new 2021 standard!) - Electrical connection: 230 V - 50Hz - Power consumption: 1.45 kW - Water connection: 1/2 inch Bjdpfx Acoivdvvsmsdc - Water flow at 2 bar: 20 liters per minute - Dimensions: 560 x 590 x 900 mm (LxWxH) - Net weight: 80 kg - Energy consumption for 100 liters: 1.5 - 2.5 kWh * at +17.5°C inlet and +2.5°C outlet

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, New unit with 12 months warranty Bodpfjivdu Uox Acmjdc Advantages of chilled ice water: + Consistently low discharge water temperatures + Precise dough temperature control year-round + Rapid hydration when mixing without ice + Smoother doughs thanks to freshly chilled, liquid ice water + Exact dosing possible via water mixing and dosing device + Water-carrying components made of stainless steel, maintenance-free + Hygienically impeccable, clean drinking water Langheinz ice water systems feature: + Constantly low water temperatures + High-performance refrigeration machines + Refrigeration systems with expansion valves + Electronic ice bank controllers + Stainless steel cooling evaporators + Multi-stage stainless steel water heat exchangers + Insulated stainless steel ice water bath + Drain tap in the ice water bath + High flow capacity + Compact dimensions + Easy-to-clean surface structure + Low energy consumption SPECIAL accessories, optionally available at extra cost: - Wall bracket in stainless steel (for model L60 + L100): + €319,-- net - Machine table (for model L60): + €399,-- net - 3-way switching valves --- for water mixing and dosing devices with only 2 inlets (cold / hot) + €349,-- net Technical specifications: - Recommended batch size: up to 15 liters - Continuous output*: 50 liters / hr - Peak cooling output*: 90 liters / hr - Ice bank: 10 kg - Cooling capacity (CECOMAF): 1.013 kW - Electrical connection: 230 V - 50Hz - Power consumption: 575 W - Water connection: 1/2 inch - Water flow at 2 bar: 8 liters / min - Dimensions: 650 x 400 x 560 mm (LxWxH) - Net weight: 50 kg - Energy consumption per 100 liters: 1 - 2 kWh * at +17.5°C inlet and +2.5°C outlet

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, New machine with 12 months warranty Advantages of chilled ice water: + consistently low discharge water temperatures + precise dough temperature control all year round + rapid swelling during mixing without the need for ice + improved dough texture thanks to freshly chilled, liquid ice water + accurate dosing possible using water mixing and metering devices + water-bearing components made of stainless steel, maintenance-free + hygienically flawless, clean drinking water Langheinz ice water systems stand out for: + consistently low water temperatures + high-performance refrigeration units + refrigeration systems with expansion valves + electronic ice bank controllers + stainless steel evaporators + multiple stainless steel water heat exchangers Bdsdpsivdvkefx Acmoc + insulated stainless steel ice water bath + drain valve in the ice water bath + high flow rates + compact dimensions + easy-to-clean surface structure + low energy consumption Special accessories, optionally available at extra cost: - Stainless steel wall bracket (for models L130 & L170): + €499 net - Machine table (for models L130 & L170): + €589 net - 3-way diverter valves --- for water mixing and metering devices with only 2 inlets (cold / hot) + €349 net Technical Data: - Batch size (recommended): up to 40 liters - Continuous output*: 70 liters/hour - Peak cooling output*: 230 liters/hour - Ice bank: 30 kg - Cooling capacity (CECOMAF): 1.189 kW - Connection values: 230 V - 50 Hz - Power consumption: 670 W - Water connection: 1/2 inch - Water flow at 2 bar: 15 liters/min - Dimensions: 560 x 590 x 900 mm (LxWxH) - Net weight: 60 kg - Energy consumption for 100 liters: 1.5 - 2.5 kWh * at +17.5°C inlet and +2.5°C outlet