4-osni obdelovalni center za palice

Elumatec SBZ 140

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, potovalna razdalja osi X: 850 mm, pomik po osi Z: 650 mm, največja hitrost vretena: 24.000 obr/min, moč vretenovega motorja: 11.000 W, število osi: 4, This 4-axis Elumatec SBZ-140 was manufactured in 2010. With a maximum profile length of 7600 mm and a Y-axis travel of 850 mm, it is suitable for machining aluminum and thin-walled steel profiles. The machine features an air-cooled spindle with a maximum speed of 24,000 rpm and a tool magazine capacity of 8 positions for efficient operation. If you're looking for high-quality machining capabilities, consider the Elumatec SBZ-140 vertical machining center we have for sale. Contact us for further details. • Application: Machining of aluminum and thin-walled steel profiles • Operating system: Windows • Machining capabilities: Milling, drilling, tapping, end machining • Continuous machining area: 0°-180° • Working area: • Max. profile length with end machining: 7480 mm • Max. profile length without end machining: 7600 mm • Axis travel: • A-axis rotation: 0°-180° • Programming increment for A-axis: 0.1° • Axis speeds: • Y-axis: up to 60 m/min • Z-axis: up to 60 m/min • Spindle: air-cooled • Tool magazine: 8 positions, traveling for fast tool change, expandable system • Machine features: Stationary profile processing, fast automatic tool change, suitable for aluminum and thin-walled steel profiles, two machining zones (optional) • Pneumatic system: 7 bar required, approx. 180 l/min air consumption (with spray system) • Electrical data: 400 V / 3-phase / 50 Hz, main connection 63 A • Control panel: 15" color display, USB interface, LAN connection Additional equipment Redszaq Eiopfx Apbsu • Angle head set (0°, 90°, 180°, 270°) for end machining and double profiles • Pendulum operation / 2 working zones (optional configuration)

Stanje: rabljeno, Leto izdelave: 1999, moč: 3 kW (4,08 KM), vhodna napetost: 400 V, največja višina reza: 200 mm, premer žaginega lista: 520 mm, skupna masa: 350 kg, dolžina rezanja (maks.): 420 mm, montažni premer: 50 mm, pogonska enota žage: 3.000 W, No. 04511 Graule ZS 200 N Crosscut and Mitre Circular Saw Used, year of manufacture 1999 Saw head swivels and tilts 3 kW three-phase brake motor, 400 V Saw blade diameter: 520 mm Saw blade bore: 50 mm Cutting height: 200 mm Cutting height at 45° blade tilt: 140 mm Cutting length: 420 mm Table dimensions: 900 x 700 mm (L x W) Aluminium back fence Includes machine stand and rear handwheel for tilt adjustment Hydraulic feed brake Pneumatic material clamping from above on both sides Saw blade spray system for coolant or lubricant Tungsten carbide-tipped circular saw blade for aluminium and plastics, 520 mm diameter Roller conveyor, type RLK, 4000 mm long, with fold-away material stop and scale Roller conveyor 4000 mm long after the saw Roller conveyor width: 350 mm Transport dimensions (approx.): Machine 1650 x 1200 x 1850 mm (L x W x H), roller conveyors approx. 4500 x 400 x 1950 mm (L x W x H) Weight approx. 350 kg To avoid misunderstandings, on-site inspection by appointment is possible and recommended. Item is sold as-is. Rjdpfxeyh Nfus Apbju Technical specifications, condition description, year of manufacture, and scope of delivery are based on the manufacturer’s brochure or previous owner, with no guarantee. Sale subject to prior sale. For used machinery, any warranty is excluded. The following applies: “purchased as inspected.” Payment terms: Prices are subject to VAT. Payment prior to collection or dispatch. Delivery terms: ex stock

Leto izdelave: 2003, stanje: rabljeno, 4-osni obdelovalni center z 8-pozicijskim avtomatskim menjalcem orodja za aluminijaste ali PVC profile Maks. dolžina obdelave: 6.400 mm Redpjuwq S Dofx Apbeu Pomik po Y-osi: 850 mm Pomik po Z-osi: 650 mm Kot vrtenja A-osi: 0° - 180° maks. Največja hitrost: 21.000 vrt/min Operacijski sistem Windows Minimalno mazanje s pršenjem Spoznava in samodejno premikanje prijemal Transportni trak za ostružke v ležišču Odvod ostružkov Nihalno delovanje z dvema varnostnima svetlobnima barierama Nakladanje je vključeno v ceno Teža: ca. 4.500 kg V zelo dobrem stanju

Leto izdelave: 2010, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1400040505, 4-osno delovno središče Rsdpfx Apey R R Iyebju uporabna dolžina: 7,6 m 12 pnevmatskih sponk 2 delovni coni

Leto izdelave: 2014, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Mobilni sesalnik za ostružke MG4, z zvočno izolacijo in samodejnim zagonom. Antistatični filter, primeren za sesanje ostružkov aluminija, PVC-ja in jekla. Samodejno čiščenje filtra ter enostavno praznjenje posode za ostružke zahvaljujoč kolesom. Rodpfxjycgtbo Apbeu Različica VP ima krmilno omarico s prostonapetostnim kontaktom za zunanjo upravljanje s strani stroja. Sprednji sesalni sistem sestavljata dve sesalni šobi iz litega aluminija s premerom 100 mm. Te omogočajo večkratno priključitev preko plastičnih cevi z ojačitvijo iz kovine na odsesovalne naprave, nameščene na rezalne stroje, žagarske centre, obdelovalne centre in PVC-stroje. Med dodatno opremo so priključki za zmanjšanje na 70 mm, Y-spojka in približno 14 m posebne sesalne cevi. (Popolno pripravljeno za uporabo z dvojnim kotnim žagalnikom Emmegi)

Stanje: dober (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, Elumatec SBZ 140 Long version: 7.6 meters Approximate weight: 5,000 kg Automatic tool changer 2-section clamping system 2 pneumatic stops Safety hood Light barriers Automatic clamp detection Central lubrication Cooling spray system Chip trolley Conditioning unit Max. spindle speed: 24,000 rpm Tool holder: HSK-63F mount, 8-position automatic tool changer. Max. milling diameter: 80 mm Max. saw blade diameter: 200 mm Compressed air: 7 bar The SBZ 140 is a 4-axis profile machining centre (axes: X, Y, Z + A). It is designed for aluminium and thin-walled steel profiles. 4-axis CNC machining centre (X/Y/Z + tilting/rotating axis A) X-axis: approx. 7,900 mm travel Y-axis: approx. 850 mm travel Z-axis: approx. 650 mm travel A-axis (rotation/tilting): Freely programmable angle, –90° to +90° Rsdpfx Apex E Ahzsbou Axis travel speed: X-axis up to approx. 65 m/min, Y and Z axes up to approx. 60 m/min (depending on configuration) Control: 4-axis CNC control system with PC operation, colour display, USB & network. Software: eluCam. Automatic material clamps, automatic positioning via locating pins Pendulum/shuttle operation (two work zones) improves production throughput. Besides milling and drilling, also tapping, sawing, profile machining—all with stationary clamped profiles. Please note: The information on this page has been obtained and compiled in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract, and we recommend verifying all relevant details. Financial information VAT/margin: VAT: The displayed price is exclusive of VAT (VAT deductible for businesses).

Leto izdelave: 2014, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1400040685, Special features: Retrofit to WIN10 – NEW – with 6-month warranty on the PC and UPS WATER-COOLED spindle 9.5 kW S1 3-layer machining possible Meticulously cleaned and overhauled – excellent condition Description: Graphical user guidance and graphical service support A-axis for stepless top-side machining – swivel range 180° HSC milling spindle for speeds up to 24,000 rpm large machining width standard with clamp detection and automatic clamp positioning 8 tool holders Complete profile machining with stationary profile bar Fast basic positioning of the machining unit (up to 64 m/min) on the X axis robust and low-wear direct drive protective hood Digital axis controllers for all 4 axes with high-resolution measuring system Redpfxsy Ah Tke Apbju 4-axis industrial PC control 2 1/2 D interpolation 15" TFT color screen Network connection RJ45 10/100 MBit Hard disk dedicated PC keyboard Remote maintenance via TCP/IP (internet connection required) Technical data: Max. machining length without end machining: 7,600 mm Max. machining length with end machining: 7,500 mm (depends on tool) Travel X-axis: 7,700 mm Travel speed X-axis: 65 m/min Travel Y-axis: 850 mm Travel speed Y-axis: 60 m/min Travel Z-axis: 650 mm Travel speed Z-axis: 60 m/min Swivel range A-axis freely programmable in 0.1° steps: 0 - 180° Positioning accuracy: X-axis: +/- 0.1 mm / 1 m Y-axis: +/- 0.1 mm Z-axis: +/- 0.1 mm A-axis: +/- 0.1° Max. spindle speed: 24,000 rpm Max. spindle output: 9.5 kW S1 Tool holder: HSK F 63 Max. milling cutter diameter: 80 mm Max. disc cutter diameter: 200 mm Compressed air connection: > 7 bar Voltage: 400 V, 3 PH, 50 Hz Fuse protection: 35 A Tool positions for 8 tools Included accessories: Tool setting gauge 8 pneumatic material clamps Automatic clamp detection Spray dosing unit Protective hood Front light barrier Safety fence left and right Central chip extraction 2 pneumatic material stops 3-circuit clamping system Length measurement for profile bars Barcode scanner with wireless transmission Special version with light barrier Further options available on request: Programming software (office) eluCad, including hotline contract for 6 months 3D import license for a machine of category “L” Data import package license for a machine of category “L” CSV import license for a machine of category “L” Macros hashing license for a machine of category “L” Other information: The machine is handed over ready for transport, including transport locks and loading onto lorry In addition, we optionally offer the following services on request: Assembly and commissioning Machine training 4/5-axis training package for machine and eluCad

Leto izdelave: 2019, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, CNC machining center with 4 controlled axes and automatic spindle rotation (0-180°). This allows the machine to access all three profile sides of the workpiece without manual repositioning. The machine features a water-cooled spindle with up to 20,000 rpm. It is suitable for processing profile bars or components made of aluminum, PVC, light metal alloys, and steel up to 2 mm. It comes with a manual tool magazine with 9 slots and an automatic tool magazine with 4 slots on the left side of the enclosure. Additionally, there is a second automatic tool magazine with 4 slots on the right side of the enclosure. Positioning of the profile is accomplished using a pneumatically operated left stop, while clamping is handled by 4 robust clamps, which are automatically positioned and controlled. Thanks to a second pneumatic stop on the right, long workpieces—up to twice the length of the machining area—can be processed (oversize processing). Furthermore, a movable clamping area facilitates loading and unloading of the workpiece and substantially increases the machinable cross-section. The machine is equipped with the following special accessories: - CamPlus software - Shape software for creating custom machining operations or importing drawings/machining contours - an additional tool magazine - a second stop - a protective hood (completely enclosed) Rjdpsyzb Ekofx Apbeu Installation, commissioning, and operator training can be provided by us upon request!

Stanje: pripravljen za uporabo (rabljen), Na voljo je 4-osni CNC center za obdelavo profilov Elumatec. Različica: 7,8 m, pomiki X/Y/Z: 7720 mm/845 mm/620 mm, največja dolžina obdelave čelno/stransko: 7720 mm/7600 mm, natančnost pozicioniranja: +/-0,1 mm/m, največja hitrost vretena: 24.000 vrt/min, vpenjalo orodja: HSK-63F, orodna mesta: 8, vpenjalne naprave: 8, dimenzije stroja X/Y/Z: pribl. 11.250 mm/3.400 mm/2.950 mm, teža: pribl. 7.400 kg, delovne ure po proizvodnem sistemu: pribl. 42.200 h. Stroj nima števca ur. Dokumentacija je na voljo. Ogled na lokaciji je možen. Rjdpjy Aafxjfx Apbsu

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Stroj je v zelo dobrem stanju. Dolžina 7,6 metra, 2 delovni mesti. Možna je do 6-mesečna garancija. Rsdjyia Ezjpfx Apbou

Leto izdelave: 2004, stanje: pripravljen za uporabo (rabljen), A fully automatic glazing bead saw by Schüco is available. Saw blade diameter: 400mm, cutting angles: 45°/90°, motor type: E63SP-2, speed: 2800 rpm. An on-site inspection is possible. Rodpfx Apowu Ez Nsbeu

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1400040164, dolžina obdelovanca (maks.): 7.900 mm, največja hitrost vretena: 21.000 obr/min, Vretenov motor je bil pred nekaj leti v tovarni popolnoma obnovljen in je bil od takrat v uporabi le približno 100 ur. TEHNIČNI PODATKI Dolžina obdelovanca: 7.900 mm Hitrost vrtenja: 21.000 min⁻¹ PODATKI O STROJU Rsdsxy Hciopfx Apbsu Pnevmatski sistem Tlak: 8 bar Električni podatki Tip priključka: 3/PEN Napetost: 400 V Frekvenca: 50 Hz Tok: 24 A

Leto izdelave: 2016, obratovalne ure: 10.900 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj je v zelo dobrem stanju in popolnoma delujoč. Ne potrebujemo ga več, zato je naprodaj. Redno je bil vzdrževan. Razstavljanje in nakladanje na tovornjak sta vključena v ceno. Dodatne informacije: Rjdpfx Apjwwtylobeu 4-osni center za obdelavo profilov Zasnovan za prilagodljivo in učinkovito obdelavo aluminija Avtonomno pozicioniranje primežev Največja delovna dolžina: 7.600 mm 8 pnevmatskih primežev Orodni magazin s kapaciteto za 8 orodij Delovne ure vretena: 5100 h Dodatne tehnične specifikacije so na voljo na zahtevo.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, skupna masa: 2.492 kg, Metal circular saw from 2013. This Elumatec DG 244 features a cutting length of 6,000 mm and a saw blade diameter of 550 mm. It is equipped with a motorized swivel range from 22.5° to 140°, as well as a mobile roller conveyor for efficient part removal. If you are looking for a high-quality saw, you should consider the Elumatec DG 244, which we offer for sale. Contact us for further information. • Cutting length (X-axis travel): 6,000 mm (6.0 m) • Saw blade diameter: 550 mm Rjdpfsyv H Tiex Apbju • Control: E 355 (2-axis control) • Swivel range: 22.5° to 140° (motorized E-axis) • Software: Module for cross-cuts and overlengths (E355/E555) • Software interface: Integration for window construction software Additional equipment • Short length stop: Included with stationary installation • Profile lifting rail set: Included for stationary and mobile units • Roller conveyor: 1.5 m long, mobile, 400 mm width for extraction • Workpiece support: Mobile type • Extraction system: Complete for DG 244, 230/400V, 50Hz, 2x 2.2kW

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 1.280 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.200 mm, pomik osi Y: 850 mm, pomik po osi Z: 650 mm, največja hitrost vretena: 24.000 obr/min, zasukni kot osi A (maks.): 180 °, DÉTAILS TECHNIQUES Longueur d’usinage max. sans usinage de faces d’extrémité : 4 200 mm Longueur d’usinage max. avec usinage de faces d’extrémité : 4 080 mm Courses Course axe X : 4 200 mm Course axe Y : 850 mm Course axe Z : 650 mm Vitesses de déplacement Vitesse de déplacement axe X : 65 m/min Vitesse de déplacement axe Y : 60 m/min Vitesse de déplacement axe Z : 60 m/min Angle d’inclinaison axe A : 0° - 180° Précision de positionnement Précision de positionnement axe X : ± 0,1 mm Précision de positionnement axe Y : ± 0,1 mm Précision de positionnement axe Z : ± 0,1 mm Précision de positionnement axe A : ± 0,1° Vitesse de rotation max. de la broche : 24 000 tr/min Puissance nominale de la broche : 7 kW S1 Porte-outil : HSK-F63 Diamètre max. de fraise : 80 mm Diamètre max. de fraise à disques : 200 mm DÉTAILS MACHINE Rodpow Svmisfx Apbou Consommation d’air : env. 180 l/min Poids de la machine : 4 200 kg Heures de fonctionnement Heures broche : 1 280 h Heures machine : 13 066 h