Prečna in zajeralna krožna žaga

Graule ZS 200 N

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Données techniques : Hauteur de coupe : 200 mm Hauteur de coupe à 45° incliné : 140 mm Pivotant à gauche jusqu’à 67° Pivotant à droite jusqu’à 45° 5 kW 1 frein d’avance hydraulique (en option) Longueur de coupe : 420 mm en position à 90° Longueur de coupe à 45° pivoté : 295 mm Inclinable à gauche : 60°, à droite : 30° Le réglage de l’inclinaison se fait à l’avant par manivelle. Dcsden R A Ewopfx Ah Ijf 1 lame de scie pour bois, diamètre 520 mm 1 convoyeur à rouleaux d’arrêt, lourd, longueur 6 000 mm, côté de montage gauche. La butée se règle par volant à main à l’avant. La longueur est lisible au millimètre près sur afficheur digital. La butée est verrouillée pneumatiquement. 1 afficheur digital, version 230 volts 1 convoyeur à rouleaux d’alimentation lourd, côté de montage droit, longueur 4 000 mm Longueur de la machine : 11 700 mm Entièrement mobile Machine emballée sur chevrons Les photos montrent la machine d’un client. Disponible sur demande aussi avec hauteur de coupe de 215 mm ou 240 mm.

Stanje: novo, Saw blade diameter: 420 x Ø 40 mm Cutting diameter: 170 mm Cutting length: 410 mm Saw blade dimensions: 420x3.2/2.4x40 mm Speed: 3500 rpm Extraction port diameter: 100 mm Total power requirement: 3.0 kW Machine weight: approx. 120 kg Dcjdsxabztopfx Ah Ijf Space requirement: approx. 1300 x 800 x 1600 mm - Crosscut and miter circular saws for cutoff cuts * Drive motor 3.0 kW - 400 Volt - Dual-sided miter adjustment (60° / 45°) with fixed stops - Compound cut 45° on both sides with fixed stops - Robust grey cast iron construction - Precision linear ball bearing guide for tool carriage on hardened and ground steel shafts - Manual saw feed - Infinitely variable saw blade height adjustment - Connection stub for optional dust extraction Cutting data: - Cutting length at 90° = 410 mm - Cutting height at 90° = 170 mm - Cutting length at 45° = 290 mm - Cutting height at 45° = 115 mm Special accessories included: - Compound cut setting via hand crank, adjustable on both sides (45°/45°) - Carbide-tipped circular saw blade 420x3.2/2.6x40 mm * Z = 108 FTZ negative for aluminum and plastic - Infinitely adjustable hydraulic feed brake - Pneumatic material clamping from above, consisting of: * 2 adjustable vertical clamping cylinders with hand lever valve - 1x machine stand - More powerful drive motor (3.0 kW)

Stanje: rabljeno, Leto izdelave: 2013, številka stroja/vozila: 2013/51/28, Ta čelilna in kotna žaga, tip: ZS 200 N, se prodaja na naši industrijski dražbi / dražbi strojev - spletna dražba za lesna podjetja – stroji za obdelavo lesa, orodja, varilni aparati, les in še veliko več, spletna dražba. Dcedpfjyxfcnjx Ah Iof To in številne druge postavke najdete na naši platformi.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, moč: 3 kW (4,08 KM), vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, premer žaginega lista: 520 mm, izvrtina žagine plošče: 50 mm, skupna dolžina: 1.750 mm, skupna širina: 1.030 mm, skupna višina: 1.800 mm, skupna masa: 400 kg, Oprema: dokumentacija / priročnik, GRAULE ZS 200 N Crosscut & Mitre Saw – Ø 520 mm – Year 2015 – Digital Displays – 400 V For sale is a very well-maintained and robust industrial crosscut and mitre saw from the reputable manufacturer GRAULE. This machine is clearly designed for professional users in timber construction, metalworking, aluminium/non-ferrous profile processing, and workshop and maintenance sectors who require reproducible, precise mitre cuts. — Manufacturer / Model Manufacturer: GRAULE Model: ZS 200 N Year of manufacture: 2015 Operating voltage: 400 V / 50 Hz — Technical Data Saw blade diameter: 520 mm Saw blade bore: 50 mm Motor: HIMMEL 3.0 kW Rated current: 6.4 A Weight: approx. 400 kg — Digital Angle Displays (ELGO / GRAULE Z-60) A key advantage of this machine is the integrated digital angle displays: – Display for horizontal mitre (turntable) – Display for vertical mitre (tilt) – Incremental/absolute switching – Zeroing/referencing possible – Parameter setting on the device Result: faster set-up, less waste, and high repeatability for series cuts. — Equipment – Heavy-duty industrial construction, smooth operation – Large mitre range via turntable – Pneumatic functions present – Coolant/minimum quantity lubrication available – Digital display on the stand – Solid clamping and stop area – Extraction port available — Condition Very well-maintained overall appearance. No makeshift repairs, fully assembled. Normal age- and usage-related wear present. Well serviced technically. Inspection and test run can be arranged and are expressly recommended. — External Dimensions (approx.) Width: 160 cm Depth: 120 cm Height: 190 cm — Price €6,990 net plus 19 % VAT — Terms – Sale on behalf of customer Dcedpfeym Egnjx Ah Ief – Invoice with VAT shown – Location: 72229 Rohrdorf – Loading by overhead crane possible – Delivery possible at buyer’s expense — Documentation – Original operating manual GRAULE ZS 200 / ZS 200N – Digital angle indicator Z-60 manual – Brochures/information sheets for the series — Summary: A professional, heavy-duty GRAULE industrial saw with digital angle display – ideal for companies that value precise mitres, repeatable accuracy, and efficient set-up times.

Stanje: rabljeno, Maximum cutting width: 310 mm Maximum cutting height: 125 mm Saw blade diameter: 500 mm Motor power: 5.5 kW SALVAMAC LEGEND 500 – Semi-automatic under-table crosscut saw Maximum cutting range: 220x125 / 260x100 / 285x80 / 310x50 mm When cutting stacked boards, max. height: 100 mm. The framework is fully constructed from thick-walled, reinforced steel with complete surface coating. Sturdy floor mounting system with flanged steel feet for fixing hole. Two-handed safety cut control positioned ergonomically. Saw motor power: 5.5 kW. Adjustable cutting speed via pneumatic controller. Maximum weight balancing system for durability. Shock-absorption system. Independent pneumatic adjustments for adaptation to various processing tasks. Durable and easily replaceable saw blade setting bar. Carbide-tipped circular saw blade, diameter 500 mm, Z=108. Pneumatic top workpiece hold-down with electro-pneumatic control. Movement system utilizes innovative ball bearings with double dust protection and automatic lubrication system. CE-compliant electrical system. CE models must be equipped as standard with at least 1 meter long infeed and outfeed roller tables. Technical Data: ----- Max. crosscutting dimension: 220x125, 260x100, 285x80, 310x50 mm Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: Carbide (HM) Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 5 Nl Dust extraction port: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: 400V / 50 Hz, 3-phase Working table height: 900 mm +/- 20 mm Color finish: RAL 7035 Machine additionally equipped with: ----- 2 m roller conveyor (right side of saw), non-driven rollers: Painted steel frame with galvanized rollers. Load capacity 230 kg, roller diameter 60 mm, spacing 250 mm, width 320 mm. Area between rollers enclosed with painted steel. Includes lateral guide. 2 m roller conveyor (left side of saw), non-driven rollers: Painted steel frame with galvanized rollers. Load capacity 230 kg, roller diameter 60 mm, spacing 250 mm, width 320 mm. Area between rollers enclosed with painted steel. Includes lateral guide, stop guide and millimeter scale. 2 heavy-duty pneumatic stops, width 200 mm each ----- Total price ex works: on request! ----- Images and video not original, show identical model. Dcsdpfxov Uq Tlo Ah Iof Other options such as extended infeed/outfeed tables or stop systems available on request! (Technical data as per manufacturer, subject to change without notice!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, premer žaginega lista: 520 mm, izvrtina žagine plošče: 50 mm, skupna dolžina: 1.750 mm, skupna širina: 1.030 mm, skupna višina: 1.800 mm, ❇️ Graule ZS 200 N – Crosscut and Mitre Saw | Excellent Condition | Fully Functional | UVV Safety Inspected For sale on behalf of a customer: a high-quality Graule ZS 200 N crosscut and mitre saw from a window manufacturing operation. The machine is in excellent, well-maintained, and fully functional condition, and was regularly used up until recently. A UVV (accident prevention regulation) / safety inspection has been carried out (see photos). Viewing and functional testing on site are possible at any time. ⸻ ❇️ Technical Data: • Manufacturer: Graule Maschinenbau GmbH, Aalen • Model: ZS 200 N • Machine type: Crosscut & mitre saw (for aluminium, wood, plastics) • Saw blade Ø: 520 mm • Bore: 50 mm • Swivel range: Large mitre range (fine scale) • Drive: 400 V • Application: Preferably for aluminium and profile machining • Construction: Heavy-duty industrial design ⸻ ❇️ Features & Highlights • Very robust machine stand • Large, dual-sided worktable (laminated multiplex) • Pneumatic hold-down clamps • Extraction hood / suction port • Digital measuring/length stop system (display mounted above) • Precision swivel mechanism with angle scale • Ideal for aluminium profiles in window manufacturing • Immediately ready for use • Only original Graule circular saw blades permitted (manufacturer's note) ⸻ ❇️ Condition • Excellent, well-maintained, immediately operational • Fully functional • Well-kept appearance • Still in use • UVV safety inspected ⸻ ❇️ Sale & Processing • Invoice with separately stated VAT available • Delivery or transport can be arranged at cost • Location: 72229 Rohrdorf • Loading by overhead crane available on site ⸻ ❇️ Price: €6,990 (net) plus 19% VAT ⸻ Dodpfx Ahox N Hxxe Iscf ❇️ Dimensions: • Approx. D 175 cm x W 103 cm x H 180 cm ⸻ ⚠️ I am offering additional accessories for the workshop and metalworking in my other listings. ‼️ Please also check my other items – it's worth it!

Stanje: novo, Leto izdelave: 2024, številka stroja/vozila: MR005970, Perfectly cuts at a height of 200 mm! Allows for double mitre cuts with a fixed zero point. When setting the machine to a mitre angle, the saw blade enters the material at the same point. Technical specifications: - Fixed zero point: Yes - Mitre angle: 45-90-25 ° - Tiltable: Yes - Tilt angle: 60-90-30 ° - Maximum cutting length: 420 mm - Maximum cutting height: 200 mm - Maximum saw blade diameter: 520 mm Dodpfsvzl Scox Ah Iecf - Weight: 310 kg - Saw blade speed: 2800 rpm - Motor power: 7 HP - Serial number: 2024/95/5

Stanje: dober (rabljeno), Leto izdelave: 1990, moč: 5,5 kW (7,48 KM), največja višina reza: 140 mm, največja širina rezanja: 1.000 mm, dolžina mize: 1.400 mm, Types: F 45, Machine no.: 90-8-86 Dcjdpfx Ahstxh Nio Isf

Stanje: novo, 400 V three-phase brake motor, 5.0 kW Saw blade diameter: 520 mm Saw blade bore: 50 mm Dcjdevxr Thepfx Ah Ijf Cutting height: 200 mm Saw blade tilted to 45°: cutting height 140 mm Cutting length: 420 mm Supplied with machine stand and rear hand crank for tilt adjustment

Stanje: novo, Saw blade diameter: 520 x Ø 50 mm Cutting diameter: 200 mm Cutting length: 420 mm Cutting height at 45°: 140 mm Saw blade specifications: 520x3.6/3.0x50 mm Speed: 2,800 rpm Extraction port diameter: 100 mm Total power requirement: 3.0 kW Machine weight approx.: 310 kg Dimensions (L x W x H): 1,400 x 900 x 1,650 mm - Cross-cut and mitre circular saw for cross cuts - Dual-sided mitre adjustment (60°/45°) with fixed stops - Dual-sided bevel cutting (60°/45°) with fixed stops - Robust cast iron construction - Precise linear guide of the tool carriage with ball bushings on hardened and ground steel shafts - Manual saw feed - Infinitely adjustable blade height - Connection for optional extraction unit Equipment: - 3.0 kW motor for aluminium cutting - Blade tilting via handwheel and worm gear (for bevel cuts) - Saw blade diameter: 520 mm - Saw blade bore: 50 mm - Saw blade speed: 2,800 rpm Dcjdoxaaxdspfx Ah Ief - 400 V / 3 kW (S6/40%) motor with brake and automatic star-delta starter - Machine weight approx.: 250 kg Cutting Data: - Cutting length at 90° = 420 mm - Cutting height at 90° = 200 mm - Cutting length at 45° = 295 mm - Cutting height at 45° = 140 mm Included Special Accessories: - HM saw blade 520x3.6/3.0x50 mm - Hydraulically adjustable feed brake - Pneumatic material clamping from above, consisting of: * 2 vertical clamping cylinders, adjustable with lever valve - Pneumatic saw blade spray system - Machine tiltable from the front to both sides via hand crank - Machine base - Powerful drive motor (3.0 kW)

Stanje: rabljeno, Leto izdelave: 2000, Used machine Year of manufacture: 2000 Features and technical data: - Grinding unit swivels via hand crank - The machine base, made of welded steel, guarantees high torsional rigidity and vibration-free operation - Oscillating sanding belt with separate gear motor for improved sanding results - Oscillation can be switched on or off as required - Sanding shoe with graphite coating for increased sanding belt service life - Height-adjustable sanding table to utilize the full width of the sanding belt - Auxiliary table for sanding radii, with integrated extraction openings - Spring-loaded belt tension automatically compensates for differences in belt length - Equipped with adjustable stops – ideally suited for veneer sanding - Veneer overhang can be easily sanded down - With chassis for mobility - Oscillation motor power: 0.11 kW - Connection voltage: 400 V - Mains frequency: 50 Hz - Sanding belt length: 2,640 mm - Sanding belt width: 150 mm - Belt speed: 14 m/s - Oscillation stroke: 15 mm - Sanding area length: 800 mm - Sanding area width: 150 mm Dsdpfx Ahswkbcbs Ijcf - Swiveling range of grinding unit: 0–45° - Working table length: 950 mm - Working table width: 450 mm - Working table height adjustment: 110 mm - Dimensions (L×W×H): 1,700 × 1,000 × 1,150 mm - Weight: 300 kg Availability: short-term Location: Flörsheim

Stanje: novo, Leto izdelave: 2026, Crosscut and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, but without saw blade The machine can be tilted via a handwheel and worm gear (rear) Dcedpei Dfidsfx Ah Iof Saw blade diameter: 520 mm, saw blade bore: 50 mm Saw blade speed: 2,800 rpm 400 volt / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swivelled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm The saw can be swivelled to one side up to approx. 25 degrees for acute angles and tilted to the left up to 30 degrees Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2026, Crosscut and Mitre Saw Type: ZS 200 N - 5 kW Motor with machine stand, Tiltable via handwheel and worm gear (rear) Saw blade diameter: 520 mm, blade arbor hole: 50 mm Saw blade speed: 2,800 rpm 400 V / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swiveled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm The saw can be swiveled to approx. 25° for acute angles on one side, and tilted flat to the left up to 30°. TCT circular saw blade 520 x 4.0/2.8 x 50 mm 60 WZ, negative rake, for wood RLH-ST60 measuring stop and roller conveyor, 6.0 m measuring length, mounting side: left Dcsdpfxok H Ic Uo Ah Ijf Heavy-duty design, length stop carriage adjustable from operator side via handwheel, electronic digital display, stop carriage pneumatically clamping, flip-away stop flap towards the rear, with steel rollers, 60 mm diameter, roller spacing 200 mm, roller width 400 mm, with 4 support feet and adapter piece, total length: 6.7 m Surcharge for digital electronic display unit type: FIAMA EP6 for 230 V mains operation, with electric on/off switch and socket. Bright dark red LED display. Higher accuracy than the battery-powered crystal display. RO-ST60 infeed roller conveyor, 4.0 m long, mounting side: right Heavy-duty design, steel rollers 60 mm diameter, roller spacing 200 mm, roller width 400 mm, with 3 support feet and adapter piece Location: Ex stock, 54634 Bitburg - Immediately available - Image: similar. Machine is still in original packaging.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, ✅ New equipment ✅ €4,179 incl. VAT ✅ Immediately available ✅ Shipping possible The SCHORR RR1000DHKB tracked dumper is a powerful and versatile mini dumper with hydraulic tipping drive and a payload of up to 1,000 kg. Powered by a 15 HP single-cylinder, 4-stroke petrol engine, it easily handles rough terrain and gradients. The self-propelled dumper features a robust track drive, ensuring a stable footing and optimal traction. The generously sized load bed allows for the transport of Euro pallets, even with the side panels closed. The hydraulic skip makes unloading significantly easier, while the automatic front opening of the skip allows for complete emptying without manual intervention. Removable side panels make it possible to flexibly enlarge the loading area, so that even larger or bulky loads can be transported without difficulty. Thanks to the intuitive track drive, the dumper can be maneuvered safely and nimbly even on uneven ground. The foldable operator platform enables comfortable long-distance travel, while the 6+2-speed transmission provides precise control and speed management. With a maximum forward speed of 6 km/h and reverse speed of 3 km/h, even complex maneuvers on the construction site are easily managed. The RR1000DHKB is designed for outdoor use and combines durable construction with easy operation. The engine features a recoil starter, and all fluids such as fuel, hydraulic oil, and transmission oil are easily accessible for maintenance and refilling. Dimensions: overall length 2,240 mm, width 900 mm, height 1,235 mm. The internal skip measures 1,315 × 815 × 300 mm, external 1,390 × 880 × 300 mm, fill height with closed sides 785 mm, and 485 mm without side panels. SCHORR offers comprehensive service: spare parts are always available, and repairs can be carried out in our workshop if required. Our team is available to answer any questions or provide guidance regarding the RR1000DHKB tracked dumper. This dumper delivers outstanding value for money, is available immediately, and, thanks to its compact design and high payload, is the ideal solution for small to medium-sized construction sites, landscaping, and industrial applications. We are happy to advise and support you with any questions about the SCHORR RR1000DHKB tracked dumper. Dodpfjxvbw Tjx Ah Ijcf

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: diverse, The Professional for Cross-Cutting, Mitre, and Compound Cuts The ZS 200 N is optimally suited for cross-cutting, mitre, and compound cuts. Materials such as wood, PVC, and aluminium profiles can be machined cleanly and precisely. The saw unit runs on a hardened guide arm and can be swung horizontally to mitre on both sides. The 'N' stands for inclination, indicating that the saw unit can also be tilted vertically to the side — allowing for easy compound cuts. ZS 200 N Fact Check Dodpfx Ahoh Nu Iuj Ijcf - Crosscut and mitre circular saw with a maximum cutting height of 200 mm - Robust grey cast iron construction - Precision ball bearing guidance of the tool carriage on hardened and ground steel shafts - Manual saw feed - Rapid mitre adjustment up to 65° horizontally and up to 60° vertically - Re-adjustable fixed stops, lower saw blade guard - Can be connected to an extraction system - Machine can be tilted to both sides from the front - Hydraulic feed brake Technical Specifications: - Motor: 400 V / 5.0 kW - Speed: 2800 rpm - Cutting length: 420 mm (at 90°) - Cutting height: 200 mm (at 90°) - Mitre range horizontal: 45°-90°-25° - Mitre range vertical: 60°-90°-30° - Saw blade diameter: 520 mm - Weight: 310 kg Scope of Delivery: - Crosscut and compound saw ZS 200 N - Machine stand - Machine tiltable to both sides from the front - Hydraulic feed brake - Circular saw blade HM Z 60 neg. - Operating tools and hand crank