Rabljeni dvojni trimer Trak-Met PTF2-4

Trak-Met G-BBS123931H

Stanje: novo, Technical Data: Length: 6 m Nedpfxowavqlj Abpsdd Length of processed log: 1000 – 4200 mm Main motor: 7.5 kW Maximum log diameter: 1000 mm Band saw guide wheels: 600 mm Frame made of 160 mm C-profile Band saw length: 4800 mm Band saw width: 40-50 mm Electric up/down movement Feed via gear motor, steplessly controlled by frequency inverter Support arms x 5 Saw head feed: Hydraulic ADDITIONAL EQUIPMENT Hydraulics: Log loader x 1 Log clamp arms Log leveling system x 1 Hydraulic log clamp x 1 Hydraulic log turner x 1 Hydraulic unit 4 kW Optional Equipment: Board drop system Microprocessor thickness controller ISP-10 Debarker / Bark remover Bed extension Motor 11 kW / 15 kW / 18.5 kW Electric roller Additional manual clamp Operator seat Operator platform Desktop stationary version Additional hydraulic components / log clamp / hydraulic log turner / powered leveling / leveling / loading Double-sided head lift chains 2x16B Hydraulic accumulator Water solenoid valve Extendable support arms Loading ramp Dual-sided head drive

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 18,8 kW (25,56 KM), vrsta goriva: dizel, kapaciteta rezervoarja za gorivo: 14 l, barva: oranžna, skupna masa: 1.400 kg, emisijski razred: Euro 5, prostornina žlice: 0,03 m³, Leto izdelave: 2025, obratovalne ure: 1 h, Oprema: gumene gosenice, standardna žlica, vilice za palete, Mini Excavator VIP14 on Rubber Tracks The modern VIP14 mini excavator is a professional and durable machine. The VIP14 model is the ideal machine for demanding construction, electrical, plumbing, renovation companies as well as service providers in similar sectors. The VIP14 is also equipped with a swing boom, which significantly facilitates work on confined construction sites. We also offer reliable after-sales support. The mini excavators are manufactured under the supervision of European engineers. The machine is built on a robust frame and can be used under any operating conditions. TECHNICAL DATA: Model: VIP14 Operating weight: 1,400 kg Bucket volume (3 buckets included): 0.04 m³ Engine: LAIDONG Engine power: 18.8 kW Number of cylinders: 3 Oil cooler: YES Swing boom: YES Expandable tracks: NO Max. gradeability: 58% Pump type: Gear pump Hydraulic pressure: 20 MPa Hydraulic flow: 36 l/min Max. travel speed: 2.5 km/h Platform swing speed: 12–13 rpm Bucket digging force: 16 kN Arm digging force: 12.5 kN Ground pressure: 23 kPa Fuel tank: 14.5 l Hydraulic tank: 15 l Engine oil capacity: 3.2 l Track rollers (per side): 3 DIMENSIONS: Length: 3,319 mm Width: 1,100 mm Height: 2,292 mm Blade width: 1,100 mm Blade height: 220 mm Track contact length: 1,190 mm Track width: 230 mm Ground clearance: 380 mm Standard bucket width: 400 mm Total track length: 1,503 mm Track model: 230x72x45 WORKING RANGE: Max. digging depth: 2,258 / 2,495 mm (with quick coupler) Max. reach: 3,417 mm Max. dumping height: 2,840 mm FEATURES AND ADVANTAGES - Special design separating engine compartment and cooling system, with reinforced fan for improved cooling efficiency - Hydraulic components from reputable brands ensure stable and reliable performance Ndodovznl Espfx Abpod - Dual fuel filter provides high fuel purity and effective engine protection - Advanced hydraulic system allows connection of various attachments - Comfortable operator cabin with wide, clear view simplifies operation - Korean joystick for precise and comfortable control - Highly versatile: suitable for landscaping, orchard work, agriculture, basement renovations, waste transport in coal processing plants, paper industry, etc.—replaces the work of 4–5 people PRICE: €11,008.40 net €13,100 gross

Stanje: dober (rabljeno), Leto izdelave: 1996, KRÜSI Chalet Construction Machine / Log House Production Line Type CM 40 Manufacturer: Krüsi Maschinenbau AG, CH-9105 Schönengrund AR Year of manufacture: 1996 Condition: Good, technically inspected and cleaned / ready for operation Operating Principle Processing of construction timber for chalet construction / log house manufacturing The beams can be processed in a single pass Nodpsu Uh T Djfx Abpsdd • Cutting to length • Horizontal and vertical milling of tenons / grooves in a single clamping • Drilling • Milling of end grooves Workpiece: • Max. cutting height: 200 mm • Max. cutting width: 250 mm Robust welded construction design. Machine (horizontal and vertical milling unit) with 4 special milling motors, equipped with hardened and ground guides for maximum machining precision. Carriage guided by dust-protected and preloaded ball bearing rollers. Working area up to 200 x 250 mm. Fully operational, with contactor control, motors protected by thermal relays. Electrical equipment for 380 V, 50 Hz, with protective covers, central connection for on-site chip extraction, with 2 eccentric clamps, without milling tools (rebate heads). With hydro-pneumatic horizontal and vertical feed, electrically controlled, operating together with spindle motor start-up. Rapid traverse and feed are steplessly adjustable. Fully wired and installed, including air maintenance unit. Beams with a thickness of more than 14 cm must be processed in two clamping steps. Such beams must be repositioned for re-milling to account for the excess thickness. Safety covers over moving parts with gas strut weight compensation. Machine Description / Equipped with: 1. Saw Unit: Manual feed Spindle adjustment with analog scale display Saw blade Ø max. / Bore Ø: 400 / 30 mm Tungsten carbide tipped with chip depth limiter (same direction of rotation) Adjustable riving knife Motor speed: min⁻¹ 2900 Power kW: 2.2 2. CM Milling Unit (Log House Unit) Hydro-pneumatic feed Spindle adjustment with digital scale display Horizontal milling unit Cutter Ø: 180 mm Max. cutter width: 130 mm For cutter widths above 60 mm, only cutters made from aluminum alloy with indexable inserts are to be used 2 motors, hydro-pneumatic feed, each 2.2 kW Hydro-pneumatic feed Rapid traverse and feed speed steplessly adjustable 3. Drilling Unit: Manual feed Spindle adjustment with analog scale display Drill holder: Collet ER 25 Clamping Ø max.: 16 mm Drill Ø max.: 32 mm Motor: min⁻¹ 1450, 1.8 kW 4. End Milling Unit Hydro-pneumatic feed Spindle adjustment with digital scale display Max. cutter Ø: 230 mm Max. cutter width: 60 mm Motor: min⁻¹ 2900, 3.0 kW 2 V-belts SPZ 9.5x1000 La Pneumatics On-site operating pressure min/max. MPa (bar): 0.7 / 1 (7 / 10) Air consumption Nm³/h: 8 Electrics Operating voltage V / Hz: 380, 50 Rated power kW: 8.8 - 15.8, depending on configuration Required on-site fuse: A 3 x 25 slow-blow Maximum simultaneous power in use: 4.4 kW Dimensions Machine width: 2400 mm Machine depth: 1600 mm Overall height (guard down): 1600 mm Overall height (guard up): 2200 mm Extraction connection Ø (floor extraction): Weight approx.: 1300 kg Incl. roller conveyor 2 x 6 m (2 x 4 m) Technical specifications subject to change!

Stanje: novo, Leto izdelave: 2023, Working width: 600 mm Working height: 280 mm Minimum workpiece length: 250 mm Units: 2 brush stations centrally adjustable, each with individual fine adjustment Diagonal brush technology: Yes, continuously adjustable from -7° to +7° 1st brush: Metal brush, diameter 220 mm 2nd brush: Tynex brush, grit 80, diameter 220 mm Ndsdpfxomftk As Abped Height adjustment: electric Height display: mechanical counter Feed speed: 4 – 12 m/min Brush motor power: 2 x 4 kW Feed motor power: 0.37 kW Machine length: 1.5 m Machine width: 1.5 m Weight: 700 kg

Stanje: rabljeno, Leto izdelave: 2000, Debarking plant type VK 32 !! Sale on behalf of customer !! Ndsdpfx Abewwladspsd

Leto izdelave: 1976, Stanje: zelo dobro (rabljeno), Frame Saw / Reciprocating Saw BÖGLI KHV-700 Marathon Year of manufacture: 1976 75 HP, 380 V, 50 Hz Max. throat: 710 mm Njdpspyglijfx Abpjdd Stroke: 500 mm Equipped with Marathon 2 riving knife Very good condition - immediately available Location: Austria, near Feldkirch

Stanje: novo, Leto izdelave: 2025, Aging Brush Sander Valmec Master 400 Working width: 400 mm Maximum working height: 300 mm Motors: 2 x 3 kW Transport belt with inverter-controlled speed adjustment Includes steel brush and Tynex brush Extraction ports: 2 x 100 mm Independent height adjustment of sanding units Dimensions: 1300 x 900 x 1600 (H) mm Machine weight: 500 kg Njdpfegmm Sasx Abpjdd

Stanje: rabljeno, Leto izdelave: 1997, Beam planer 260 x 160 mm, trailing chamfering unit on upper spindle, air cushion table with two-axis control for left and upper spindle, brand new control system (latest Weinig version). Maximum working width: 260 mm Maximum working height: 160 mm Number of spindles: 6 units 1st spindle: bottom, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 2nd spindle: right, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm, motor power 11.0 kW (shared motor with left spindle) 3rd spindle: left, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm 4th spindle: top, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 5th spindle: bottom, spindle diameter 40 mm, motor power 11.0 kW, speed 6000 rpm, clamping length 270 mm 6th spindle: top, chamfering unit Motor brakes: mechanical Height adjustment for upper spindle: electrical Optional with/without feed Feed brake system: Yes Feed speed steplessly adjustable up to 3 - 23 m/min Feed roller pressure: pneumatic Feed power: 4.0 kW Ndedpfx Abjwwwkhepod Feed drive: cardan Lubricant pump: manual Max. planing depth: 10 mm Jointing rebate cutter on jointer: Yes Powered rollers in table: 1 unit Control type: PLC control Spindle position display: mechanical numeric indicator Infeed rollers before jointer: Yes Air cushion table: three-track Central lubrication point: Yes Description: short infeed table 1050 mm with internal light Location: Nattheim

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1981, Funkcionalnost: nepreverjeno, številka stroja/vozila: 3124, Esterer DKV-5S Edging Saw Year of manufacture: 1981 55 kW saw motor with extraction system ASV/B Ndsdpfxeuy Ib Ie Abped Year of manufacture: 1981

Leto izdelave: 2022, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Lauber wood dryer with longitudinal ventilation Chamber with stacking cart Ndodomidtrspfx Abpsd Net volume: 7.2 m³ with wood temperature measuring point -> new / unused / original packaging -> immediately available (standard delivery time approx. 3/4 year) -> see detailed description in the photos -> Collection, loading, etc. by buyer -> Transport, customs clearance and insurance by buyer