Dvodelna žaga

Graule - sofort verfügbar - - ZS 200 N mit RLH und RO

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, HOLZMA PROFILINE HPL 380 Podatki o rezu in dvižni mizi Dolžina reza: 4.300 mm Velikost reza z dvižno mizo: 4.300 mm x 2.200 mm Mere plošče za avtomatsko podajanje (maks.): 4.300 mm x 2.200 mm Mere plošče za avtomatsko podajanje (min.): 1.200 mm x 400 mm Višine skladov Višina sklada na dvižni mizi ob postavitvi na ravni tal (maks.): 560 mm Višina sklada na dvižni mizi ob postavitvi v jami (maks.): 780 mm Nosilnost dvižne mize (maks.): 4 t Valjčne tirnice Valjčna tirnica, 10-stezna: 1 kos Valjčna tirnica, 2-stezna: 6 kosov Vpenjalne klešče Hfodpfx Afex Nf Eqjwef Razmiki: 75/275/475/1.075/1.825/2.625/3.425 mm Odsesovalne in zračne mize Pozicija odlagalne naprave: 2.375 mm Zračna miza z valji 2.160 x 800 mm: 1 kos Zračna miza z valji 2.160 x 650 mm: 3 kosi Centralni ventilator: 1 kos Razvodna cev za zračne mize: 70 x 70 mm

Leto izdelave: 2011, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Finger Jointing Line for Cross-Sections up to 200 cm² (80/240 mm or 100/200 mm), with the following components: 1. HOWIAL – Tilt Destacking Station - SH/4t - 1.75x1.75x6.00 m - 4 t – minimum length 2.50 m, semi-automatic singling of the package. For tilting wood stacks up to 45°. Electrically driven. Maximum stack dimensions: 1.75 x 1.75 x 6.00 m. Hfsdpfji Ezx Dox Afwof Maximum stack load: 4 t Minimum wood length: 2.5 m 2. HOWIAL – Lamella Singling Unit VE 1 to cross-cut saw. With pneumatically controlled tongues for sorting material marked for defects, placing it onto the underlying roller conveyor. 3. HOWIAL – Grading Roller Conveyor RO-1 Digital wood moisture measurement, control and recording system for automatic moisture detection and monitoring using the resistance method in cycle measurement mode. 4. Gann DMT-8 Digital wood moisture measurement, control, and recording system for automatic moisture detection and monitoring using the electrical resistance principle in cycle mode. Installed in a large control cabinet with inkjet printer. 5. HOWIAL – Cross-Cut Saw AS-30 B Pneumatically operated under-table cross-cut saw with two automatic feed units and automatic cross-cutting. Control by special photo cell for detecting fluorescent line marks. Automated waste removal possible. Saw motor power: 7.5 kW Saw blade diameter: 700 mm Feed drive: approx. 2 x 1.5 kW Air pressure: 8 bar Max. feed speed: approx. 60 m/min 6. HOWIAL – Conveyor Belt for Cut-Off Waste, with studded belt and guide plates Belt width: 350 mm Belt length: 2000 mm Belt speed: 0.4 m/s 7. HOWIAL – Double Roller Conveyor RO-2, 6.00 m long Incl. cross transport. Finger jointing automation feeding. Driven by round belt, all rollers are powered. Cross transfer via chain conveyor. Eject ± moisture to the right. Adjustable transport speed up to 100 m/min. Length: approx. 6.00 m Roller width: approx. 400 mm Diameter: 112 mm 8. Compact Finger Jointing Machine Cook Bolinder Technical data as per Cook Bolinder: Wood width from 75 to 245 mm Wood thickness from 20 to 105 mm Feed-in lengths from 1 m to 6 m Cross-sections from 30 cm² to 200 cm² Press force: 5 - 22 t Spindle diameter: 50 mm Finger profile: 15/15 Spindle speed: approx. 6000 rpm Total electrical connected load: approx. 62 kW Machine weight: approx. 9 t Gluing system: OEST comb application system for PU Modern Telemechanique PLC (SPS) Control 9. HOWIAL – Roller Conveyor with Destacking Powered roller conveyor with automatic ejector and hydraulically driven destacking arms. Technical data: Height: 920 mm Length: approx. 12,000 mm 10. Safety Guarding Fences including safety switch 11. Finger Joint Test Machine BSPLT-100 Testing machine for finger joint bend test according to DIN 1052-1/A1 and EN 385. Adjustable support distances, built-in measuring scale, automatic calculation of support distances in software. Fully automatic test process triggered by mouse click on PC (not included). Alternatively, test process can be triggered by push-button on front panel. Connection to any standard PC or laptop (Win 2000/XP) via included RS232 serial cable. Fully automatic data acquisition and protocol generation in MS Excel with graphical representation. Max. wood width: 300 mm Max. wood thickness: 140 mm Max. compression force: < 100 kN Max. support length: 2100 mm Measurement accuracy WITHOUT DISMANTLING

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, used horizontal panel saw Manufacturer: Holzma Model: PROFI HPL 430/43/22 Hodpfx Afsymx S Dowoff Year of manufacture: 2011 Cutting length: 4300 mm Cutting width (program pusher travel): 4250 mm Roller track (2-lane elements): 9 units Clamps: 7 units, first 3 with 2-finger design Air cushion table width: 650 mm, 4 pcs, each 2160 mm long Central blower: 1 unit with increased blower performance – 3 inclined lift clamps (2-finger): – 1 inclined lift clamp (1-finger): – 1st air cushion table: 800 mm wide – Speed package:-> Saw carriage feed: 1–150 m/min Technical data: Saw blade projection: 95 mm Saw carriage feed: forward 25 m/min, reverse constant 90 m/min Automatic cutting height adjustment Angle alignment device, min. clamping width 0 mm, max. clamping width up to full cutting length Main saw motor: 18 kW, frequency-controlled Scoring saw motor: 2.2 kW Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connection load with main saw motor 18 kW: 28 kW Power Control CADmatic 4.0 control system with 17” flat display Labelling with part graphics / label program / label printer PICA 104

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, For sale: Firestone Destination M/T tires, size 255/75 R17. We have 5 tires available: 2 of them are like new, used for approximately 1 month. Hodpfx Afswq Sa Rowjff

Stanje: novo, Leto izdelave: 2025, VISOKOZMOGLJIV TRAKASTI RAZREZ WRAVOR, POSEBEJ ZASNOVAN ZA NATANČNO IN UČINKOVITO RAZREZOVANJE LEPLJENIH NOSILCEV. ZAGOTAVLJA VISOKO KAKOVOST REZA, MINIMALNE IZGUBE MATERIALA IN OPTIMALNO PRODUKTIVNOST. 📌 Ključne značilnosti: ✔ Natančen razrez lepljenih nosilcev ✔ Avtomatsko upravljanje za večjo učinkovitost Hjdjvu Um Nspfx Afweff ✔ Trdna in zanesljiva konstrukcija

Stanje: zelo dobro (rabljeno), Planer HA 4 Hsdjinkfnspfx Afwsff Planing width: 450 mm Total table length: 2,500 mm Infeed table: 1,500 mm Machine height: 820 mm Maximum cutting depth: 15 mm Cutterhead speed: 4,800 rpm Motor power: 4 HP Weight: 660 kg Three-knife cutterhead

Leto izdelave: 2011, stanje: pripravljen za uporabo (rabljen), A shredder manufactured by Gross Apparatebau GmbH, previously used in the wood industry, is available. Feed opening (X/Y): 600mm/800mm, hopper volume: 0.6m³, rotor diameter: 252mm, rotor length: 600mm, rotor speed: 90 rpm, drive power: 18.5kW, number of knives: 14, screen perforation: 10mm–40mm, extraction nozzle diameter: 160mm, machine dimensions (X/Y/Z): approx. 1800mm/1200mm/1650mm, weight: approx. 1300kg, operating hours: 4578h. Documentation is available. On-site inspection possible. Hfjdpeu Nlkxofx Afwsf

Stanje: novo, Leto izdelave: 2025, premer žaginega lista: 550 mm, vhodna napetost: 400 V, priključek za stisnjen zrak: 7 letvica, Oprema: dokumentacija / priročnik, - Saw blade 550 mm - Double mitre Hsdshzuu Nspfx Afweff - 4 pneumatic clamps - Hydrocheck system - Mist lubrication system - 1 roller conveyor 300 cm - 1 roller conveyor 300 cm with length stop - Air blow gun - Protective cover - Documentation - 400V

Stanje: rabljeno, Leto izdelave: 1999, moč: 3 kW (4,08 KM), vhodna napetost: 400 V, največja višina reza: 200 mm, premer žaginega lista: 520 mm, skupna masa: 350 kg, dolžina rezanja (maks.): 420 mm, montažni premer: 50 mm, pogonska enota žage: 3.000 W, No. 04511 Graule ZS 200 N Crosscut and Mitre Circular Saw Used, year of manufacture 1999 Saw head swivels and tilts 3 kW three-phase brake motor, 400 V Saw blade diameter: 520 mm Saw blade bore: 50 mm Cutting height: 200 mm Cutting height at 45° blade tilt: 140 mm Cutting length: 420 mm Table dimensions: 900 x 700 mm (L x W) Aluminium back fence Includes machine stand and rear handwheel for tilt adjustment Hydraulic feed brake Pneumatic material clamping from above on both sides Saw blade spray system for coolant or lubricant Tungsten carbide-tipped circular saw blade for aluminium and plastics, 520 mm diameter Roller conveyor, type RLK, 4000 mm long, with fold-away material stop and scale Roller conveyor 4000 mm long after the saw Roller conveyor width: 350 mm Transport dimensions (approx.): Machine 1650 x 1200 x 1850 mm (L x W x H), roller conveyors approx. 4500 x 400 x 1950 mm (L x W x H) Weight approx. 350 kg To avoid misunderstandings, on-site inspection by appointment is possible and recommended. Item is sold as-is. Technical specifications, condition description, year of manufacture, and scope of delivery are based on the manufacturer’s brochure or previous owner, with no guarantee. Sale subject to prior sale. For used machinery, any warranty is excluded. The following applies: “purchased as inspected.” Hfsdpfx Aoyh Nfuefwof Payment terms: Prices are subject to VAT. Payment prior to collection or dispatch. Delivery terms: ex stock

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1989, An aluminium die casting system is available. Clamping force: 2200 kN, opening force: 71 kN, max. opening stroke: 430 mm, mold locking system: toggle double-knee lever, shot chamber: cold chamber, orientation: horizontal. Plunger diameter min./max.: 40 mm / 70 mm, shot chamber fill volume min./max.: 293 cm³ / 898 cm³, casting pressure: 1990 bar, projected area min./max.: 110 cm² / 338 cm², capacity: 780 cycles/h. Tie bar distance X/Y: 500 mm / 500 mm, platen dimensions X/Y: 755 mm / 755 mm, mold height min./max.: 250 mm / 600 mm, minimum mold dimensions X/Y: 296 mm / 296 mm. Includes crucible furnace, air blast device, dosing unit and 4x control cabinets. Documentation available. Hfjdpfsucfwpsx Afwof