Krožna žaga za prečni in poševni rez

Graule ZS 200N-F

Stanje: novo, Leto izdelave: 2026, Crosscut and Mitre Circular Saws Model ZS 200NF Crosscut and mitre circular saw featuring a maximum cutting height of 200 mm Robust grey cast iron construction Precision ball bushing guide for the tool carriage on hardened and ground steel shafts Manual saw feed Quick mitre adjustment up to 65° horizontally and 60° vertically Re-adjustable fixed stops Lower saw blade guard can be connected to extraction system Machine mounted on a mobile machine base with 1.5 m long roller conveyors on both left and right sides Left side equipped with scale and adjustable stop Technical Data Bedpew Hl Aqsfx Afnjwi Motor: 400 V / 5.0 kW Speed: 2800 rpm Cutting length: 420 mm (at 90°) Cutting height: 200 mm (at 90°) Mitre range - horizontal: 45°- 90°- 25° Mitre range - vertical: 60°- 90°- 30° Saw blade diameter: 520 mm (not included as standard) Extraction port: 100 mm Weight: 490 kg Location: From stock 54634 Bitburg - Immediately available - On request, we are happy to offer you the saw blade as well.

Stanje: novo, Leto izdelave: 2026, Crosscut and Mitre Saw Type: ZS 200 N - 5 kW Motor with machine stand, Tiltable via handwheel and worm gear (rear) Saw blade diameter: 520 mm, blade arbor hole: 50 mm Saw blade speed: 2,800 rpm 400 V / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swiveled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm The saw can be swiveled to approx. 25° for acute angles on one side, and tilted flat to the left up to 30°. TCT circular saw blade 520 x 4.0/2.8 x 50 mm 60 WZ, negative rake, for wood RLH-ST60 measuring stop and roller conveyor, 6.0 m measuring length, mounting side: left Heavy-duty design, length stop carriage adjustable from operator side via handwheel, electronic digital display, stop carriage pneumatically clamping, flip-away stop flap towards the rear, with steel rollers, 60 mm diameter, roller spacing 200 mm, roller width 400 mm, with 4 support feet and adapter piece, total length: 6.7 m Surcharge for digital electronic display unit type: FIAMA EP6 for 230 V mains operation, with electric on/off switch and socket. Bright dark red LED display. Higher accuracy than the battery-powered crystal display. RO-ST60 infeed roller conveyor, 4.0 m long, mounting side: right Heavy-duty design, steel rollers 60 mm diameter, roller spacing 200 mm, roller width 400 mm, with 3 support feet and adapter piece Location: Ex stock, 54634 Bitburg - Immediately available - Image: similar. Bedpfjk H Ic Usx Afnowi Machine is still in original packaging.

Stanje: novo, Leto izdelave: 2026, Mobile crosscut station with an extremely robust chassis, fully assembled and ready for operation. Included special equipment: - Machine tiltable on both sides from the front - Hydraulic feed brake - Circular saw blade HM 520x50 Z60 W neg. - Mobile underframe, particularly stable Machine specifications: - Constant zero point: particularly suitable when using measuring devices and stop systems (for miter and tilt!) - Powerful three-phase motor, 5 kW, with automatic star-delta start - Sturdy guide arm with 4 linear ball bearings for precise and safe feed-out - Swivels left 45° (miter) - Swivels right 65° (miter) - Tilts left 60°, right 30° - Cutting width at 90°: 420 mm - Cutting width at 45° miter: 295 mm - Cutting height vertical: 200 mm - Cutting height at 45° tilt: 140 mm - Cutting height at 60° tilt: 80 mm - For saw blade 520x50 mm - Extraction nozzle 100 mm - Weight with stand: 300 kg - CE and GS certified, dust-tested - Made in Germany, quality product Chassis specifications: Extremely stable frame construction made of large-dimension profiles, powder-coated, robust steel support rollers with high wall thickness, galvanised and ball-bearing mounted, heavy-duty double-stop swivel castors with PU running surface, very easy to move Roller width: 450 mm Supports adjustable via threaded spindles Roller track 1500 mm per side Stop length 2750 mm per side Overall length: 5990 mm Stop profile heavily ribbed, 100x50 mm, anodised aluminium (extendable as an option) 1 folding stop right and left Measuring tape right and left Shipping available at extra cost. We only ship within the EU. No shipping outside the EU. Bodpfx Aob Nrg Uefnjwi

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Données techniques : Hauteur de coupe : 200 mm Hauteur de coupe à 45° incliné : 140 mm Pivotant à gauche jusqu’à 67° Pivotant à droite jusqu’à 45° 5 kW 1 frein d’avance hydraulique (en option) Bjdpfx Afsn R A Ewsnjwi Longueur de coupe : 420 mm en position à 90° Longueur de coupe à 45° pivoté : 295 mm Inclinable à gauche : 60°, à droite : 30° Le réglage de l’inclinaison se fait à l’avant par manivelle. 1 lame de scie pour bois, diamètre 520 mm 1 convoyeur à rouleaux d’arrêt, lourd, longueur 6 000 mm, côté de montage gauche. La butée se règle par volant à main à l’avant. La longueur est lisible au millimètre près sur afficheur digital. La butée est verrouillée pneumatiquement. 1 afficheur digital, version 230 volts 1 convoyeur à rouleaux d’alimentation lourd, côté de montage droit, longueur 4 000 mm Longueur de la machine : 11 700 mm Entièrement mobile Machine emballée sur chevrons Les photos montrent la machine d’un client. Disponible sur demande aussi avec hauteur de coupe de 215 mm ou 240 mm.

Stanje: novo, Leto izdelave: 2025, Cutting height at 90°: 170 mm Cutting length: 430 mm Mitre range horizontal: 45°-90°-25° Mitre range vertical: 60° - 90° - 30° Swivel adjustment with hand crank: yes Roller conveyor / support table: yes Saw blade diameter: 420 mm Speed: 2800 rpm Motor power: 3 kW Motor brake: yes Extraction port: 100 mm Roller conveyor length: 2 x 1500 mm Machine length: 4000 mm Bwedpfjizkhvox Afnji Machine width: 1250 mm Machine height: 1550 mm Weight:

Stanje: novo, Leto izdelave: 2026, Crosscut and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, but without saw blade Bedoi Dfidspfx Afnswi The machine can be tilted via a handwheel and worm gear (rear) Saw blade diameter: 520 mm, saw blade bore: 50 mm Saw blade speed: 2,800 rpm 400 volt / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swivelled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm The saw can be swivelled to one side up to approx. 25 degrees for acute angles and tilted to the left up to 30 degrees Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Measuring lengths: up to 5700 mm Tube length: 6000 mm Number of supports: 7 Material: stainless steel tube Bwsdpfx Afjfv Atlsnei Dimensions (L x W x H): 6.0 x 0.3 x 0.2 m The length measuring system is available as a retrofit for existing roller conveyors in lengths ranging from 2 to 6 meters. The guide rail is made from rectangular tube 60 x 30 x 3 mm. The steel measuring tape is self-adhesive. The magnifier with 6x magnification facilitates precise adjustment to the desired length. Note: This offer is for the stop system only, without roller conveyor!

Stanje: rabljeno, Technical details: Swing over bed: 320 mm Turning length: 800 mm Distance between centers: 800 mm Center height: 150 mm Spindle bore: 30 mm Speed range: 35 - 1500 rpm / 16 steps Feed range X-axis: 0.04 - 2.4 m/min / 30 steps Tailstock quill stroke: 125 mm Bsdpfsu Ixy Dox Afnswi Tailstock taper: MT2 Machine dimensions approx. LxWxH: 1.7 x 0.8 x 1.5 m Equipment and additional features: - Röhm 3-jaw chuck 160 mm - Chuck guard - Safety system WxH: 510x400 mm - Multifix tool holder (4 pcs) - Centre in tailstock - Compound slide swivels +/- 45°, maximum travel = 100 mm - Cross slide travel = 300 mm feed - Pump for coolant system (without supply)

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: diverse, The Professional for Cross-Cutting, Mitre, and Compound Cuts Bwsdpfx Afoh Nu Iujnsi The ZS 200 N is optimally suited for cross-cutting, mitre, and compound cuts. Materials such as wood, PVC, and aluminium profiles can be machined cleanly and precisely. The saw unit runs on a hardened guide arm and can be swung horizontally to mitre on both sides. The 'N' stands for inclination, indicating that the saw unit can also be tilted vertically to the side — allowing for easy compound cuts. ZS 200 N Fact Check - Crosscut and mitre circular saw with a maximum cutting height of 200 mm - Robust grey cast iron construction - Precision ball bearing guidance of the tool carriage on hardened and ground steel shafts - Manual saw feed - Rapid mitre adjustment up to 65° horizontally and up to 60° vertically - Re-adjustable fixed stops, lower saw blade guard - Can be connected to an extraction system - Machine can be tilted to both sides from the front - Hydraulic feed brake Technical Specifications: - Motor: 400 V / 5.0 kW - Speed: 2800 rpm - Cutting length: 420 mm (at 90°) - Cutting height: 200 mm (at 90°) - Mitre range horizontal: 45°-90°-25° - Mitre range vertical: 60°-90°-30° - Saw blade diameter: 520 mm - Weight: 310 kg Scope of Delivery: - Crosscut and compound saw ZS 200 N - Machine stand - Machine tiltable to both sides from the front - Hydraulic feed brake - Circular saw blade HM Z 60 neg. - Operating tools and hand crank

Leto izdelave: 1972, stanje: pripravljen za uporabo (rabljen), Table diameter: 300 mm Bwjdpfsd Rlifjx Afnoi Height in horizontal position: 155 mm Width: 500 mm Depth: 500 mm