Chopsaw

Graule ZS 200 NF

Stanje: novo, Leto izdelave: 2026, Crosscut and Mitre Circular Saws Model ZS 200NF Crosscut and mitre circular saw featuring a maximum cutting height of 200 mm Robust grey cast iron construction Ljdpfx Asw Hl Aqel Nerk Precision ball bushing guide for the tool carriage on hardened and ground steel shafts Manual saw feed Quick mitre adjustment up to 65° horizontally and 60° vertically Re-adjustable fixed stops Lower saw blade guard can be connected to extraction system Machine mounted on a mobile machine base with 1.5 m long roller conveyors on both left and right sides Left side equipped with scale and adjustable stop Technical Data Motor: 400 V / 5.0 kW Speed: 2800 rpm Cutting length: 420 mm (at 90°) Cutting height: 200 mm (at 90°) Mitre range - horizontal: 45°- 90°- 25° Mitre range - vertical: 60°- 90°- 30° Saw blade diameter: 520 mm (not included as standard) Extraction port: 100 mm Weight: 490 kg Location: From stock 54634 Bitburg - Immediately available - On request, we are happy to offer you the saw blade as well.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Viessmann Vitoplex 700 kW Year: 2014 Model: SX2A Output: 700 kW Lsdpfjtu T I Ujx Al Nerk Inspection by prior telephone arrangement only! Preferred sale to dealers, commercial operators, or for export. All information is provided without guarantee; subject to errors and prior sale. R2ru7mxt2v The seller assumes no liability for typographical or data transmission errors. Naturally, we will also handle all formalities. Loading possible Request more information

Stanje: novo, Leto izdelave: 2026, Product Details Crosscut and Mitre Circular Saws Model ZS 200NF Crosscut and mitre circular saw with a maximum cutting height of 200 mm Robust grey cast iron construction Precision linear ball bearing guide of the tool carriage on hardened and ground steel shafts Manual saw feed Quick mitre adjustment up to 65° horizontally and 60° vertically Adjustable end stops Lower saw blade guard connectable to extraction system Machine mounted on mobile machine base with 1.5 m long roller conveyors on both left and right sides Left side equipped with scale and stop slider Technical Data Lrsdecnz Rvepfx Al Nok Motor: 400 V / 5.0 kW Speed: 2800 rpm Cutting length: 420 mm (at 90°) Cutting height: 200 mm (at 90°) Mitre range, horizontal: 45°-90°-25° Mitre range, vertical: 60°-90°-30° Saw blade Ø: 520 mm (not included as standard) Extraction port: 100 mm Weight: 490 kg Location: Ex stock 54634 Bitburg - Immediately available - We can also supply the saw blade on request.

Stanje: novo, Leto izdelave: 2025, Cutting height at 90°: 200 mm Cutting height at 45°: 140 mm Cutting width at 90°: 420 mm Cutting width at 45°: 295 mm Mitre range, horizontal: 45° - 90° - 25° Mitre range, vertical: 60° - 90° - 30° Saw blade diameter: 520 mm Speed: 2,800 rpm Ljdpfx Aljiy Ry Aj Nsrk Motor power: 5 kW Motor brake: yes Extraction port: 100 mm Weight: 490 kg

Leto izdelave: 2001, obratovalne ure: 123 h, stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: 123, Chip silo Diameter: 5 m Height: approx. 8 m Net capacity: 42 m³ Suitable for storage of sawdust. Lrsdpfx Ajftdv Usl Nsk Inspection possible at our warehouse in H-2013 Pomáz at any time by prior arrangement.

Stanje: rabljeno, SPE Renergi nizkotemperaturni sušilnik. Renergi sušilnik se uporablja za sušenje žagovine in drugih materialov za proizvodnjo biogoriv. Sušilnik lahko suši žagovino, lubje ali lesne sekance, zmanjšujoč vsebnost vlage približno s 50 % na približno 10 %. Ta nizkotemperaturni sušilnik uporablja toplo (ali vročo) vodo s priporočeno temperaturo od 65 °C naprej. Najvišja temperatura vode: 110 °C. Varnost napajanja: Sušilnik sme biti priključen izključno na trifazno omrežje 3x400 V AC (630 A), 50/60 Hz, z ločenim zaščitnim ozemljitvenim vodnikom. Podatki o napajanju: • Napetost: 400 V AC, trifazno • Priporočene varovalke: največ 3x630 A • Tipična poraba energije: 200 kW Dimenzije sušilnika so cca 17,4 x 5,7 m, višina 10,7 m. Potrebna talna površina znaša približno 21,4 x 8,0 m. Višina stropa naj bo vsaj 15 m (oziroma 4 m nad vrhom dovoda materiala). Dovod zraka: Za obratovanje naprave je potreben dovod vsaj 24 kg/s svežega zraka (kar ustreza 20 nm3/s ali 72.000 nm3/h). Pretok zraka: največ 200 l/min Tlak zraka: najmanj 4,5 bar, priporočljivo 6,0–8,0 bar Vodni dovod: topla voda, pretok 32 dm3/s Tlak vode: najmanj 1,5 bar, največ 6,0 bar Obratovalno temperaturno območje: • Temperatura dovedenega zraka: -20 °C do +50 °C • Relativna vlažnost: 0 % do 60 % Surovina/material: • Relativna vlažnost: 45–55 % (teža) • Zahtevana vlažnost po sušenju: 8–15 % Lodpfx Aewp Rqfel Nerk Zmogljivost: • Dvo-celični sušilnik širine 4 m lahko praviloma obdela 2.400 kg materiala z vsebnostjo vlage 55 % v vsaki seriji • Sušilnik lahko posuši 6.000 kg surovine (od 55 % na 10 % vode) v eni uri SRE sušilnik je izdelan skladno z evropskimi direktivami in ustreza zahtevam: • Direktiva o strojih 2006/42/ES • LVD 2006/95/ES • EMC 2004/108/ES Sušilnik se nahaja v občini Straupe, okrožje Cēsis, LV-4152, Latvija. Ogled je možen ob delavnikih od 8.00 do 17.00, predhodno po dogovoru. Sušilnik je že demontiran. Na voljo so vsi električni shematski prikazi, navodila za uporabo in servisna dokumentacija. Po dogovoru zagotovimo kontakt z uporabnikom tovrstnega sušilnika za strokovno svetovanje. Cena: 20.000,00 EUR (DDV ni vključen)

Leto izdelave: 2011, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Finger Jointing Line for Cross-Sections up to 200 cm² (80/240 mm or 100/200 mm), with the following components: 1. HOWIAL – Tilt Destacking Station - SH/4t - 1.75x1.75x6.00 m - 4 t – minimum length 2.50 m, semi-automatic singling of the package. For tilting wood stacks up to 45°. Electrically driven. Maximum stack dimensions: 1.75 x 1.75 x 6.00 m. Maximum stack load: 4 t Minimum wood length: 2.5 m 2. HOWIAL – Lamella Singling Unit VE 1 to cross-cut saw. With pneumatically controlled tongues for sorting material marked for defects, placing it onto the underlying roller conveyor. 3. HOWIAL – Grading Roller Conveyor RO-1 Lredpfxoi Ezx Ds Al Njk Digital wood moisture measurement, control and recording system for automatic moisture detection and monitoring using the resistance method in cycle measurement mode. 4. Gann DMT-8 Digital wood moisture measurement, control, and recording system for automatic moisture detection and monitoring using the electrical resistance principle in cycle mode. Installed in a large control cabinet with inkjet printer. 5. HOWIAL – Cross-Cut Saw AS-30 B Pneumatically operated under-table cross-cut saw with two automatic feed units and automatic cross-cutting. Control by special photo cell for detecting fluorescent line marks. Automated waste removal possible. Saw motor power: 7.5 kW Saw blade diameter: 700 mm Feed drive: approx. 2 x 1.5 kW Air pressure: 8 bar Max. feed speed: approx. 60 m/min 6. HOWIAL – Conveyor Belt for Cut-Off Waste, with studded belt and guide plates Belt width: 350 mm Belt length: 2000 mm Belt speed: 0.4 m/s 7. HOWIAL – Double Roller Conveyor RO-2, 6.00 m long Incl. cross transport. Finger jointing automation feeding. Driven by round belt, all rollers are powered. Cross transfer via chain conveyor. Eject ± moisture to the right. Adjustable transport speed up to 100 m/min. Length: approx. 6.00 m Roller width: approx. 400 mm Diameter: 112 mm 8. Compact Finger Jointing Machine Cook Bolinder Technical data as per Cook Bolinder: Wood width from 75 to 245 mm Wood thickness from 20 to 105 mm Feed-in lengths from 1 m to 6 m Cross-sections from 30 cm² to 200 cm² Press force: 5 - 22 t Spindle diameter: 50 mm Finger profile: 15/15 Spindle speed: approx. 6000 rpm Total electrical connected load: approx. 62 kW Machine weight: approx. 9 t Gluing system: OEST comb application system for PU Modern Telemechanique PLC (SPS) Control 9. HOWIAL – Roller Conveyor with Destacking Powered roller conveyor with automatic ejector and hydraulically driven destacking arms. Technical data: Height: 920 mm Length: approx. 12,000 mm 10. Safety Guarding Fences including safety switch 11. Finger Joint Test Machine BSPLT-100 Testing machine for finger joint bend test according to DIN 1052-1/A1 and EN 385. Adjustable support distances, built-in measuring scale, automatic calculation of support distances in software. Fully automatic test process triggered by mouse click on PC (not included). Alternatively, test process can be triggered by push-button on front panel. Connection to any standard PC or laptop (Win 2000/XP) via included RS232 serial cable. Fully automatic data acquisition and protocol generation in MS Excel with graphical representation. Max. wood width: 300 mm Max. wood thickness: 140 mm Max. compression force: < 100 kN Max. support length: 2100 mm Measurement accuracy WITHOUT DISMANTLING

Stanje: novo, Leto izdelave: 2024, Hacker knives 40 x 40 concave Blades for Weima, Gross, etc. For almost all common chippers/shredders Lsdpfebxu Dhox Al Njrk Available from stock in Bitburg Subject to prior sale

Stanje: rabljeno, Technical details: Swing over bed: 320 mm Turning length: 800 mm Distance between centers: 800 mm Center height: 150 mm Spindle bore: 30 mm Speed range: 35 - 1500 rpm / 16 steps Feed range X-axis: 0.04 - 2.4 m/min / 30 steps Tailstock quill stroke: 125 mm Lrodpfx Alju Ixy Ds Nok Tailstock taper: MT2 Machine dimensions approx. LxWxH: 1.7 x 0.8 x 1.5 m Equipment and additional features: - Röhm 3-jaw chuck 160 mm - Chuck guard - Safety system WxH: 510x400 mm - Multifix tool holder (4 pcs) - Centre in tailstock - Compound slide swivels +/- 45°, maximum travel = 100 mm - Cross slide travel = 300 mm feed - Pump for coolant system (without supply)

Stanje: rabljeno, Leto izdelave: 1999, moč: 3 kW (4,08 KM), vhodna napetost: 400 V, največja višina reza: 200 mm, premer žaginega lista: 520 mm, skupna masa: 350 kg, dolžina rezanja (maks.): 420 mm, montažni premer: 50 mm, pogonska enota žage: 3.000 W, No. 04511 Graule ZS 200 N Crosscut and Mitre Circular Saw Used, year of manufacture 1999 Saw head swivels and tilts 3 kW three-phase brake motor, 400 V Saw blade diameter: 520 mm Saw blade bore: 50 mm Cutting height: 200 mm Cutting height at 45° blade tilt: 140 mm Cutting length: 420 mm Table dimensions: 900 x 700 mm (L x W) Aluminium back fence Includes machine stand and rear handwheel for tilt adjustment Hydraulic feed brake Pneumatic material clamping from above on both sides Saw blade spray system for coolant or lubricant Tungsten carbide-tipped circular saw blade for aluminium and plastics, 520 mm diameter Roller conveyor, type RLK, 4000 mm long, with fold-away material stop and scale Roller conveyor 4000 mm long after the saw Roller conveyor width: 350 mm Transport dimensions (approx.): Machine 1650 x 1200 x 1850 mm (L x W x H), roller conveyors approx. 4500 x 400 x 1950 mm (L x W x H) Weight approx. 350 kg To avoid misunderstandings, on-site inspection by appointment is possible and recommended. Item is sold as-is. Technical specifications, condition description, year of manufacture, and scope of delivery are based on the manufacturer’s brochure or previous owner, with no guarantee. Sale subject to prior sale. For used machinery, any warranty is excluded. The following applies: “purchased as inspected.” Payment terms: Prices are subject to VAT. Payment prior to collection or dispatch. Lsdjyh Nfuopfx Al Nork Delivery terms: ex stock