4-stebrična hidravlična stiskalnica, poskusna stiskalnica za orodja, sinhrona stiskalnica, dvostebri

AGEO GHP 200 H6

Hydraulic Parallel-Motion Press, Spotting Press AGEO Type GHP 200 H6
4-Column Hydraulic Press, Tool Trial Press, Spotting Press
Serial No. 21169 Year 1993
Pressing force: 200 tons
Clearance between uprights (front): 1200 mm
Side opening between uprights: 650 mm
Table size: 1560 x 1010 mm
Ram area: 1560 x 1010 mm
Ram stroke: 575 mm
Draw cushion stroke: 300 mm
Draw cushion holding force: 63 tons
Draw cushion ejector force: 30 tons
Max. daylight: 775 mm
Table height above floor: 1000 mm
Guide column diameter: 140 mm
Clamping pin bore on ram: 64 mm
Pressing speed: 0 to 10 mm/s, infinitely variable
Return speed: 0 to 20 mm/s, infinitely variable
Main motor power: 22 kW
Control pump motor power: 5.5 kW
Electrical connection: 400 Volt, 50 Hz
- Table and ram with 22 mm T-slots
- Two pressure cylinders with electronic precision parallel-motion control
- Infinitely variable electrical stroke limitation (upper and lower, with digital travel measurement and position display)
- Mechanical safety upholding device (prevents ram from lowering due to its own weight)
- One-hand and two-hand operation
- Electrical tool safety via signal contact
- Pressure preset independent of stroke (via keyboard, digital pressure display)
Nljdpfx Aaowva I Horei
- Travel measurement system left and right with rotary encoders
- Electrical control: MS-DOS PC with Ageo H v2.23 control software
- Operator panel with swivel-mounted screen
- Stroke movement and press speed controllable via joystick
- Separate hydraulic unit with electrical cabinet
- Hydraulic draw cushion under press table
- Draw cushion with ejector function
- Continuous stroke control
- Floor-level installation
- Electrical oil temperature monitoring
- Operating manual with circuit diagrams
Space required for press, upright: L x W x H = 1800 x 1010 x 3470 mm
Space required for horizontal transport: L x W x H = 3500 x 1800 x 1200 mm
Press net weight: 13 tons
Space required for hydraulic unit: L x W x H = 1000 x 800 x 3040 mm
Hydraulic unit net weight: approx. 1 ton
The machine was used as a tool trial press in a toolmaking facility.
Very good condition.

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.