Prismenauflage Stahl 1100 Kg nakup rabljenega (69.761)

Stanje: rabljeno, Format: 320 x 450 mm Ncedjyzrucepfx Ah Uot

Stanje: dober (rabljeno), Leto izdelave: 2014, Proizvajalec: DEMAG Nosilnost: 860 kg + 630 kg (opremljeno z dvema dvigali) Njdoyu R Dzspfx Ah Ujct Točne tehnične mere so prikazane na slikah. Tir za dvigalo je mogoče podaljšati s strukturami in nogami, prikazanimi na slikah, vendar pa so za podaljšanje potrebni tudi drugi elementi tira, ki niso na voljo!!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 20.331 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 970 mm, dolžina polnilne odprtine: 1.800 mm, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 750 kg, skupna masa: 33.000 kg, Good day, We hereby offer, subject to prior sale, a used, complete baling line consisting of a baler from the manufacturer HSM, type VK 8818 R-FU including conveying technology and wire tying stations. The following technical data have been taken from the operating manual and manufacturer brochures. We assume no liability for the correctness or completeness of this information. Technical Data Baler: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours, as of September 2025 Number of bales pressed: 29,020 bales, as of September 2025 Main press force: 1,000 kN Specific press force: 120 N/cm² Shear-edge ejector press force: 121 kN Feed opening dimensions: 970 x 1,800 mm Theoretical cycle time in idle operation: 8.3 seconds Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2000 mm Drive capacity: 2 x 45 kW, frequency-controlled Total connected load: 110 kW Total current consumption: 213 A Fuse protection: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Throughput rates at bulk density of 20 kg/m³: 12.86 t/hour bulk density of 50 kg/m³: 32.15 t/hour Bale weight at a bale length of approx. 1.2 m: 650 to 750 kg per bale, depending on material Hydraulic oil tank volume: 2,000 L HVI 46 PLC: Siemens S7-300 Operator panel: Siemens TP 700 Dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions with conveyor technology: 35,000 x 8,480 x 7,745 mm (L x W x H) Weight baler: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Additional special equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to standard 2 x 45 kW motors at the same output Manual activation/deactivation of wire tying strands to save tying wire with non-expanding materials Shear-edge ejector with 121 kN press force Wire break/end sensor monitoring, with baler shut-off in the event of wire breakage or wire end Bale slide Optical warning signal mounted on the control cabinet Nsdsyz Af Eepfx Ah Usct Condition of the baler: The entire baling system (baler and conveyor technology) is in good, immediately operational condition and has been cleaned, lubricated, and maintained weekly by the operator in accordance with the manufacturer’s specifications. Technical Data Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain belt conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Length of feed belt: 7,000 mm Length of ascending belt: 14,500 mm Length of goose neck: 1,550 mm Inclination: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of delivery: - HSM VK 8818 R-FU baler - Service platform - Bale slide - Wire deflection stations - Wire spool trolleys (without wire spools) - Stadler KF 1800 chain belt conveyor - Crosswise sliding belt conveyor - Pit cover from the feed conveyor to the pit - Second control cabinet for baler operation at the conveyor - Machine documentation in English Delivery time: The entire plant has already been dismantled and stored, and will be ready for loading shortly after payment is received. We would be pleased if this or one of our other balers is of interest to you. Your service team, Mertens & Frowein GmbH

Stanje: rabljeno, Leto izdelave: 1993, Format: Maksimalna širina pološčenke 660 mm, maksimalna dolžina 300 mm. Minimalne dimenzije pološčenke: 120 x 100 mm. Debelina izdelka: Največ 4 mm. Dolžina skladovnice: Največ 80 cm. Tlačna sila: 8.000 N Nedpfoy N Uxmox Ah Usct Višina dovoda: Variabilno od 360 mm do 960 mm.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta upravljanja: Krmiljeno s PLC krmilnikom, vrsta aktuacije: električni, Premer cevi (maks.): 54 mm, Dolžina cevi (maks.): 6.000 mm, Debelina stene cevi (maks.): 4 mm, Kot upogiba (maks.): 195 °, radij upogibanja (maks.): 250 mm, tlak (maks.): 250 letvica, Oprema: CE označba, centralizirani mazalni sistem, hitroizmenjevalna naprava, nožno daljinsko upravljanje, nujno zaustavitev, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with a free-standing bending head can be easily converted for demanding geometries to right- or left-hand bending. The plug-in bending tools enable quick changeovers to different tube sizes. Fast hydraulics to reduce downtimes is a key factor for series production. The clamping pressure for tube holding can be optimally adjusted. The PLC control system (expandable via USB stick) with data storage and the latest X2X interface can store a virtually unlimited number of programs for bending angles, lengths, and rotation angles for up to 50 bending sequences per tube. For monitoring springback values, a freely programmable database for up to 200 materials is available. The machine features two operating modes: In "Simple Bending", the length and rotation of each bend relative to each other are displayed automatically. In "Controlled Bending" mode, the data is stored beforehand, and during the bending process, a continuous target/actual comparison is performed. As a result, mispositioning within a tolerance window is ruled out and user-related error rates are minimized. General error messages are shown in full text on the large screen. The mandrel retraction is programmable and can automatically retract early when the bending angle is reached. The compact drive unit with detachable mandrel holder offers benefits for installation on site as well as for special designs with large tube feed, and is also available as a stationary version with a tool and mandrel rod organizer. The cost-effective alternative to a fully controlled CNC machine. POTENTIAL APPLICATIONS: • Hydraulic tubing installation • Pipeline construction • Plant construction, e.g. for chemical industry • Metal fabrication Nodpfx Aeng Exajh Uoct • Prototype construction • Technical Data: • Bending capacity: Ø 4 to 50 x 4 mm depending on material • Bending radius min/max: 10 mm/140 mm • Minimum bending radii: 1.5 x Ø (standard 2 x Ø) • Multifunction machine control for bending angle setting (0.1°) • Mandrel carrier lengths: 1500/3000/4500/6000 mm (special versions longer available) • Maximum bending angle: 180° • Weight: 800-900 kg (depending on configuration) • Ergonomic operation via safety foot pedal OPTIONAL EQUIPMENT: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Positioning of length and rotation via automatic braking function or manual stops operated by foot pedal • Automatic length and rotation positioning via servo motors • Pneumatic rotation stop • Pipe calculation software • Laser-assisted tool monitoring for checking tool clamping force • 10-inch touchscreen with integrated pipe calculation • Bending radii up to 250 mm • Data transfer by cable (LAN), wireless (WLAN), or USB OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our in-house demonstration room • Consulting and information session at your site • Consultation and processing of leasing/financing purchases through JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance for your machine

Stanje: novo, Leto izdelave: 2025, PROFILE BENDING ATTACHMENT PB20 The ideal complement for tube bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be quickly and easily mounted onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping fixture and pulled around the bending tool. With this system, the lengths of the bent legs can be measured precisely using a length stop and can be bent with high repeatability. Ncedonh R Ekepfx Ah Uot TECHNICAL DATA: • Bending capacity, steel 37: 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible • Sharp-edge tools with bending radius R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° (optional) OUR SERVICE: • Welcome to test production at our in-house demo room • Consultation and information meeting at your site • Leasing/financing purchase consultation and processing via JUTEC • Trade-in of your existing machine • Service contracts and on-site maintenance

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, vrsta upravljanja: Krmiljeno s PLC krmilnikom, vrsta aktuacije: električni, Premer cevi (maks.): 54 mm, Dolžina cevi (maks.): 6.000 mm, Debelina stene cevi (maks.): 4 mm, Kot upogiba (maks.): 195 °, radij upogibanja (maks.): 250 mm, minimalni polmer upogibanja: 9 mm, tlak (maks.): 250 letvica, trajanje garancije: 24 meseci, Oprema: CE označba, centralizirani mazalni sistem, hitroizmenjevalna naprava, nožno daljinsko upravljanje, nujno zaustavitev, THE ECONOMICAL TUBE BENDING MACHINE FOR TIGHT BENDING RADII: The tube bending machine with a free-standing bending head can be easily converted for challenging geometries to bend both right and left. Plug-in bending tools enable quick changeovers to different tube sizes. A high-speed hydraulic system to reduce idle times is a key factor for series production. The clamping pressure for holding the tube can be optimally set. The PLC control system (expandable via USB stick) with data storage and latest X2X interface can store an almost unlimited number of programs for bending angle, length measurement, and twisting angle for up to 50 bending sequences per tube length. For monitoring spring-back values, a freely programmable database for up to 200 materials is integrated. The machine offers two operating modes: In “Simple Bending” mode, the machine automatically displays the length and rotation of each bend. In “Controlled Bending” mode, the data is preloaded and during bending, a continuous target/actual comparison is performed. This eliminates incorrect positioning within a defined tolerance window, thereby minimizing user-related error rates. General error messages are shown in full text on the large display. Mandrel retraction is programmable and can be automatically retracted early upon reaching the bending angle. The compact drive unit with detachable mandrel support offers advantages for use on site as well as for special designs with very long tube feeds and is also available as a stationary version with an organized tool and mandrel rod storage system. An economical alternative to a fully controlled CNC machine. POSSIBLE APPLICATIONS: • Hydraulic piping • Pipeline construction • Plant engineering (e.g. chemical industry) • Metalworking • Prototype construction Technical data: • Bending capacity: Ø 6 to 50 × 4 mm, depending on material • Bending radius min/max: 10 mm / 140 mm • Minimum bending radius: 1.5 × Ø (Standard 2 × Ø) • Multi-function machine control with bending angle adjustment (0.1°) • Mandrel support lengths: 1,500 / 3,000 / 4,500 / 6,000 mm (special designs available in longer lengths) • Maximum 180º bending result • Weight: 600–700 kg (depending on version) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Ncjdpfondn Agox Ah Ujt • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Length and rotation positioning via automatic brake system or manual stops via foot switch • Semi-automatic length and rotation positioning via servo motors • Pneumatic rotary stop • Pipe calculation software • Laser-based tool monitoring for clamping force control • 10-inch touchscreen with integrated pipe calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICES: • Test production in our in-house demo room • On-site consultation at your premises • Consultation and processing as lease/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta aktuacije: električni, Premer cevi (maks.): 35 mm, Debelina stene cevi (maks.): 2 mm, Kot upogiba (maks.): 360 °, radij upogibanja (maks.): 150 mm, minimalni polmer upogibanja: 32 mm, skupna masa: 28 kg, trajanje garancije: 12 meseci, Oprema: CE označba, nožno daljinsko upravljanje, nujno zaustavitev, THE MOBILE BENDING MACHINE WITH HIGH PERFORMANCE: The compact, mobile design allows for precise and repeatable bending, both stationary and directly on-site, for pipe diameters up to 35 mm, CU 42 mm. A powerful three-phase motor and precision gearbox ensure strong drive power. The motor speed is automatically adjusted, allowing the return movement to take place at a higher speed and reducing cycle times. A position sensor directly on the bending axis guarantees optimal bending accuracy and very high repeatability. The bending angle can be set to 0.5° easily and quickly using push buttons. The large LCD display shows the angles clearly. Storage of up to three bending angles enables efficient bending of pipes with different bending results. For transport, the compact unit and accessories can be stored cleanly and securely in robust transport cases. The “stationary pipe and rotating tool” design principle ensures minimal space requirements when bending. For thin-walled pipes, sliding shoes are used to allow wrinkle-free bending and to form bends with minimal deformations, e.g., in stainless steel and copper pipes. With the PB20 profile bending attachment, flat, square, and round bars can be bent easily. POSSIBLE APPLICATIONS: • Hydraulic piping • Prototype construction • Sanitary and heating installations • Technical data: • Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material • Bending radius min/max: 36 mm/150 mm • Precise digital bending angle adjustment: 0.5° • Maximum 180º bending result; for special applications, continuous operation possible • 40 mm hexagonal shaft for quick tool changes • Safety footswitch with emergency stop function • 230 V AC connection • Weight: 29 kg • Frequency inverter and three-phase motor • 3 storable bending angles OPTIONAL ACCESSORIES: Nodpfx Aenfvx Noh Uect • Sliding shoe holder • Double roller mount • Profile bender PB20 – for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm • Tripod stand • Machine case • Tool case • Small bending device KBV • Special tools upon request OUR SERVICE: • Welcome to test production at our premises in the demo room • Consultation and information session at your site • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance at your location

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: Ncodpfxondk N As Ah Uot The compact bending machine enables precise and repeatable bending of pipes up to an external diameter of 100 mm, both stationary and directly at the installation site. Transport is easy using a pallet truck or the optional rollers. A robust three-phase motor and a precision gearbox provide high-performance drive power. The machine impresses with its compact and slim design and a very open bending area. Precise position sensing directly on the bending axis ensures optimal bending accuracy. The bending angle is quickly and easily set via a convenient, menu-guided user interface in 14 languages with touchscreen control, guaranteeing highly intuitive operation. For complex bending tasks, up to 100 bending programs can be stored, each featuring a sequence of up to 8 bends per geometry. Thanks to the multifunctional control system, both forward and return bending speeds can be variably set, and an adjustable overbend function compensates for the material’s springback. With the help of four material characteristic curves, the machine automatically overbends the material to the required angle, delivering precise results. The “stationary tube, rotating tool” principle minimizes the required workspace. For thin-walled tubes, sliding shoes are used to ensure wrinkle-free bends and to achieve minimal deformation—ideal for stainless steel and copper pipes. With the PB20 profile bending attachment, flat, square, and round bars can be bent without issue. Using the small-radius bending device (KBV), extremely small bending radii are possible. POTENTIAL APPLICATIONS: • Plant construction • Hydraulic piping • Serpentine bending • Prototyping • Sanitary and heating installation • Shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material Three-phase 400 V • Bending radius up to 500 mm • Multifunctional machine control with bending angle adjustment (0.1°) • Maximum bending angle 240° • Safety foot switch with emergency stop • Weight: 600 kg OPTIONAL ACCESSORIES: • Adapter system for tools from the 3000/6000 series, with bending radius from 45 mm, incl. 40 mm hex shaft • Profile bender PB20 – for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm • Small-radius bending device KBV • Special tools according to customer specifications • Software customization for special tasks OUR SERVICES: • Welcome to carry out test production in our in-house demo room • Consultation and information meeting at your site • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, maintenance at your site

Stanje: novo, Leto izdelave: 2025, THE PRACTICAL HAND TUBE BENDER: The compact, mobile design allows for precise and consistently repeatable bending operations in a bench vice. Operation is performed via a screw-in handle. A lockable setting ring ensures consistent, repeatable bending angles. The easily exchangeable plug-in tool system makes tool changes straightforward. The 'stationary tube and rotating tool' principle enables bending with minimal space requirements. For thin-walled tubes, slide shoes are used for crease-free bending, enabling the production of bends with minimal deformation from materials such as stainless steel and copper tubes. The optional hexagonal drive version allows, in addition to vice operation, the use of the drive force from the 3000 and 6000 bending systems. The KBV can simply be mounted onto the machine’s bending shaft for this purpose. POSSIBLE APPLICATIONS: • Hydraulic piping installation • Prototype fabrication • Plumbing and heating installation TECHNICAL DATA: • Bending capacity: Ø 6 to 18 mm • Manual bend angle limitation • Maximum bending angle: 180º OPTIONAL ACCESSORIES: • KBV with hexagonal drive for bending on models 3000 or 6000 • Machine case • Length stop Ncjdpfx Asng Amkjh Uet OUR LOCAL SERVICE FOR YOU: • Welcome to test production at our on-site demonstration room • Consultation and information meeting at your facility • Consultation and processing of lease/financing purchase through JUTEC • Trade in of your current machine • Service contracts and on-site maintenance

Stanje: novo, Leto izdelave: 2025, THE PRECISE 3-ROLL BENDING MACHINE The development of this compact and mobile horizontal bending machine was clearly focused on the production of dimensionally accurate spirals, such as handrails for spiral staircases. This represents the highest level of complexity, as two interdependent variables (radius and pitch) must come together in a single bend to create a precise geometry. The interaction between pipe calculation on a PC, implementation on the bending machine, and monitoring with measuring devices, including final corrections of bending parameters, ensures accurate bending. With just a few simple entries in the PC pipe calculation program, the local printer provides a printout supporting the calculation of all necessary bending and correction data for machine operation. A new, powerful drive concept enables stepless adjustment of the bending speed, requiring only a 230 V (single-phase) power connection. Both hardened steel tools and surface-friendly, hard plastic tools are available. To ensure optimal feed, even for tight bending radii, all three bending rollers are driven. The drive concept proves its worth in daily heavy-duty use, whether working on flat surfaces or bending pipes and profiles. Customers of the 4800, 5000, and 6000 bending systems have the option of purchasing the roll bending unit without the drive. The roll bending unit, designated RB43, can be adapted to the 4800, 5000, and 6000 systems via the bending shaft. In this configuration, the machines serve as the drive unit. POSSIBLE APPLICATIONS: • Handrails/underrails for spiral staircases Nodpfx Asng A R Sjh Usct • Large pipe and profile bends • General metal construction TECHNICAL DATA: • Bending capacity: Ø 10 to 60 mm • Minimum bending radius: 300 mm at Ø 42.4 mm • Bending direction: right and left • Digital adjustment for radius and pitch • Safety foot switch with emergency stop function • Maintenance-free, robust three-phase motor • Site-ready 230 V connection • Weight: 280 kg OPTIONAL ACCESSORIES: • Support roller – for stabilization • Lifting roller – to produce controlled pitch • MGR – Measuring device for determining the correct radius • MGV – Measuring device for determining the correct pitch based on twist • MPW – PC calculation program for determining the correct bending values • RB4303 – Universal bending tool for profiles up to 60 mm in height • Tools for special profiles OUR SERVICE FOR YOU ONSITE: • Welcome to test production at our facility in the demo room • Consulting and information session at your location • Consultation and processing of leasing/financing purchases • Service contracts, onsite maintenance

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta upravljanja: Krmiljeno s PLC krmilnikom, vrsta aktuacije: električni, Premer cevi (maks.): 100 mm, Dolžina cevi (maks.): 6.000 mm, Debelina stene cevi (maks.): 8 mm, Kot upogiba (maks.): 195 °, tlak (maks.): 250 letvica, trajanje garancije: 24 meseci, Oprema: CE označba, centralizirani mazalni sistem, hitroizmenjevalna naprava, nožno daljinsko upravljanje, nujno zaustavitev, THE ECONOMICAL MANDREL BENDING MACHINE FOR TIGHT BEND RADII This bending system offers solutions for complex geometries with standard radii of 2xD for tube dimensions from 15 to 100 mm. Depending on material quality and wall thickness ratio, radii as tight as 1.5xD can be reliably achieved in series production. With a tool height of 120 mm, there is also ample versatility for special profiles. The highly precise and powerful electric drive of the bending axis, together with the robust and rigid construction of the mandrel carrier and bending arm, ensures top-quality bending results. The plug-in bending tools enable quick setup changes for different tube sizes. The clamping pressure for the tube can be optimally adjusted. The PLC control (expandable via USB stick) with data memory and the latest X2X interface can store an almost unlimited number of programs for bending angles, length, and rotation, managing up to 50 bending steps per tube. To monitor springback values, a freely programmable database for up to 200 materials is available. The control offers two operating modes: In "Simple Bending", length and twist between the bends are automatically displayed. In "Controlled Bending" mode, data is pre-stored, and a continuous target/actual comparison is performed during bending. Also available with pneumatic rotary stop or with geared-assisted length and rotation positioning. Nsdpfx Asnh R Sueh Uect POSSIBLE APPLICATIONS: • Plant engineering, e.g., chemical industry • Hydraulic piping • Metal construction • Prototype construction • Pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mm Bending capacity 9000: Ø 20 to 90 x 5 mm (depending on material) • Min./max. bending radius: 40 mm / 250 mm • Min. bending radii: 1.5 x Ø (standard 2 x Ø) • Multifunctional machine control for bending angle adjustment (0.1°) • Mandrel carrier lengths: 3000 / 4500 / 6000 mm • Maximum bending angle: 180º • Weight: 1,600–3,200 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Larger bending radius up to 300 mm • Length and rotation positioning via automatic brake or manual stops using foot switch • Semi-automatic length and rotation positioning via servo motors • Automatic tool retraction • Tube calculation software • 10-inch touchscreen with integrated tube calculation • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICES: • Welcome to test production in our in-house demo room • Consulting and information session at your site • Consultation and transaction as leasing/finance purchase through JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, številka stroja/vozila: 1018, vrsta upravljanja: Krmiljeno s PLC krmilnikom, stopnja avtomatizacije: ročni, vrsta aktuacije: električni, Premer cevi (maks.): 50 mm, Dolžina cevi (maks.): 6.000 mm, Debelina stene cevi (maks.): 3 mm, Kot upogiba (maks.): 195 °, radij upogibanja (maks.): 250 mm, trajanje garancije: 24 meseci, Oprema: CE označba, hitroizmenjevalna naprava, nožno daljinsko upravljanje, nujno zaustavitev, THE MANDREL BENDER WITH MANUAL CLAMPING Ncodpfx Ahenfvy Uo Uet This mandrel bending machine with manual eccentric quick-release clamping for tube fixation enables efficient bending operations. The compact drive unit with detachable mandrel support offers advantages during on-site installation. Direct position detection on the bending axis ensures optimum bending precision. The bending angle can be set quickly and easily via a convenient touchscreen controller with a user-friendly, menu-driven interface. The advanced control system allows for two speed settings as well as a configurable overbending feature for compensating material springback. The bending process is significantly shortened by the automatic “return” movement at the end of the bend. For more complex bending tasks, bending programs can be stored, offering up to 50 bend angles per geometry. An almost unlimited number of programs and up to 200 materials can be saved to the controller or a USB stick. Plug-in bending tools allow for fast changeover to different tube sizes. For challenging geometries, the machine can be converted as standard to either right-hand or left-hand bending directions. The open bending unit also allows for bends such as railing frames with only a single weld seam. Optional PC calculation software determines the cut length for the entire geometry as well as the feed path, twist, and bending angle for every individual bend. The mandrel retraction is programmable and can be automatically triggered once the predefined bending angle is reached. POSSIBLE APPLICATIONS: • Plant construction, e.g. chemical industry • Hydraulic piping • Prototyping • Pipeline construction TECHNICAL DATA: • Bending capacity: Ø 6 to 50 mm • Minimum/maximum bending radius: 10 mm / 140 mm • Bending radii: 2 x D • Multifunction machine control for bending angle adjustment (0.1° accuracy) • Mandrel support lengths: 1500/3000/4500/6000 mm (special versions are available with longer lengths) • Maximum bending result: 180º • Weight: 300-500 kg (depending on configuration) Optional accessories: • Automatic mandrel lubrication (minimal quantity) • Digital measuring system for length and twisting (resolution 0.1) • Remote control of all functions at the carriage (rotational and length stop) • Bending radius up to 250 mm • PC tube calculation software OUR SERVICES: • Welcome to trial production in our in-house demo room • Consulting and informational meeting at your premises • Consultation and processing of leasing/financing purchase through JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ASSEMBLY The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm, both stationary and directly at the installation site. A powerful three-phase motor and a precision gearbox ensure a robust drive. Position detection directly on the bending axis ensures optimal bending accuracy. The bending angle can be set quickly and easily via a user-friendly, menu-driven touchscreen interface that ensures even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, each with an angle sequence of up to 8 bends per geometry. The multifunction control allows for variable adjustment of the bending speed for forward and reverse operation, and features a parametrizable overbending function to compensate for material spring-back. By using four material characteristic curves, the material is automatically overbent to the required bending angle, ensuring an accurate bending result. The "stationary pipe, rotating tool" principle ensures a minimal footprint during bending. For thin-walled pipes, sliding shoes are used to achieve wrinkle-free bends and to bend curves with minimal deformation from materials such as stainless steel and copper tubing. With the PB20 profile bending attachment, flat, square and round bars can be bent effortlessly. The KBV small radius attachment enables extremely small bending radii. POSSIBLE APPLICATIONS: • Plant construction • Hydraulic tubing • Meander bending • Prototype construction • Sanitary and heating installation TECHNICAL DATA: Bending capacity 6000SB: Ø 6 to 50 x 4 mm, single-phase 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm, three-phase 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm, three-phase 400 V • Minimum/maximum bending radius: 36 mm/280 mm • Optional large bending radii up to 500 mm • Multifunction machine controller, bending angle setting (0.1° precision) • Maximum bending angle 240° • 40 mm hexagonal shaft for quick tool change • Safety foot switch with emergency stop • Weight 110 kg OPTIONAL ACCESSORIES: • PB20 profile bender – for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm • RB43 roller bender – The RB43 is mounted on the hexagonal shaft of the bending axis. By switching to continuous bending, the bending system functions as a drive unit. • KBV small radius attachment • Special tools according to specification OUR LOCAL SERVICE FOR YOU: • Welcome to conduct test production in our in-house demo room • On-site consultation meeting Ncjdpfx Ahsng Ax So Uet • Advice and processing for leasing/financing purchases • Trade-in of your current machine • Service contracts, maintenance at your site

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2016, Električni verižni dvigalo s vozičkom, Ex zaščiten, tip STK2008-10 1,6 4/2 - 1 ex, hitrost dviga 0,80 / 5,00 m/min, višina dviga 4.500 mm, nosilnost 1.600 kg Njdsxcx Dqopfx Ah Uoct

Leto izdelave: 1969, stanje: rabljeno, Swivel bending machine Albert Stahl Type ABK 400 /5 Ncodjh Rkh Depfx Ah Ust Working length: 2530 mm Sheet thickness: 5 mm

Leto izdelave: 1968, stanje: dober (rabljeno), Electric chain hoist Stahl type Elektus A2, 380 Volt, 2 lifting speeds, 3 m chain length, 12 m cable length, pendant control. Ncjdpsd E Akcsfx Ah Uet

Leto izdelave: 1969, stanje: dober (rabljeno), Steel chain hoist type T 302, 400 Volt, 2 lifting speeds, chain length 3 meters Ncedpfx Aod E Akkoh Uot

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, 4 kasete 1 nož Tehnične specifikacije: Ncsdpfxsxnb N Ho Ah Ujt Minimalna velikost papirja: 105 x 150 mm Maksimalna velikost papirja: 520 x 840 mm Podajanje z visoke skladi Konfiguracija: – 4 kasete na prvem modulu Ti-52 – Mobilni izhod Invertersko, gladko nastavljanje zgibanja Dušenje hrupa kasete Kompresor Becker Senzor za dvojne pole Elektronski števec s funkcijo paketiranja Električni izhod z nastavljivo hitrostjo izhoda. Nadomestni deli in orodja

Leto izdelave: 1991, stanje: dober (rabljeno), številka stroja/vozila: 44070/91-180102,

Leto izdelave: 2024, stanje: novo, oris - Mini Extruder ESE 20/25 D Technical Data Screw diameter [mm]: 20 Screw length [L/D]: 25 Screw speed [rpm]: 20–200 Screw axial pressure [bar]: 300 continuous load, 350 maximum Nsdpjhx Elfofx Ah Uect Drive: Three-phase motor with frequency inverter Drive power [kW]: max. 2.5 Reduction gearbox with integrated axial bearing Weight [kg]: approx. 160 Dimensions [L x W x H, mm]: approx. 1050 x 600 x 1590 Electrical connection: 3 / N / PE Supply voltage [V]: 400 at 50 Hz Control voltage [V]: 230 Temperature control with electric resistance heating bands in mica design. Max. processing temperature [°C]: 300 Control cabinet and operator panel The extruder’s electrical installation is housed within the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; water connection must be provided by the customer, and a separate chiller for water cooling is not included in the offer. Extruder tooling is not included in the scope of supply.

Stanje: rabljeno, Leto izdelave: 1991, Oprema: kompresor, 6 žepov 2 križno zgibanje Oddajanje Ncjdpfx Ahey N Az Ae Ujt Oddajanje z preše SBP 46

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, moč: 9,7 kW (13,19 KM), Technical Data – Cardboard Shredder (2-Shaft Shredder): Manufacturer: Presto GmbH & Co. KG Model: PZA Year of Manufacture: 2007 Throughput Volume: 130 m³/hour Speed: 37/9 rpm Motor Power: 7.5 / 2.2 kW Electrical Connection: 32 A Internal Shredder Dimensions: 1,490 x 1,320 x 530 mm (L x W x H) External Shredder Dimensions (without cover): 2,308 x 1,320 x 685 mm (L x W x H) Machine Weight: 0.45 t System Application: The PZA-type cardboard shredder was used in a Dutch logistics center to pre-shred loose, set-up cartons from the returns department, which were then pressed into bales. Cartons were manually placed onto the infeed conveyor and transported directly to the shredder by a sliding belt conveyor for shredding. The pre-shredded cartons were then conveyed over several hundred meters to the baling press for compaction. Scope of Delivery: 1 piece Presto Cardboard Shredder (2-Shaft Shredder), model PZA Ncodpfx Ahju Tha Ij Uet Notes: The cardboard shredder was an integral part of the disposal line and was well maintained to ensure high availability in the returns department. The machine is in good condition and immediately operational. Price is per unit ex works our warehouse in Siddeburen, Netherlands. Full documentation (operating manual, CE declaration, electrical/hydraulic schematic) is available. Inspection is possible by appointment. We assume no liability for the accuracy of the technical data or for possible errors.

Stanje: dober (rabljeno), Leto izdelave: 2010, obratovalne ure: 3.641 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 36 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.080 mm, širina bale: 1.100 mm, višina bale: 750 mm, moč: 15 kW (20,39 KM), volumenski pretok: 90 m³/h, Technical Data – Baler: Manufacturer: Presto GmbH & Co. KG Model: CC 36 M Year of Manufacture: 2010 Operating Hours: 3,641 h Main Press Force: 36 t Specific Pressing Force: 467 N/cm² Feed Hopper Dimensions: 1,080 x 1,100 mm (L x W) Cycle Time: 34 seconds Filling Volume per Press Cycle: 0.85 m³ Theoretical Throughput: 90 m³/hour Throughput under Operating Conditions (at material bulk density of 35 kg/m³): approx. 51 m³/hour Bale Dimensions: 1,100 x 750 mm (W x H), length variable Drive Power: 15 kW Binding: 4-fold vertical, semi-automatic, with polyester twine Throughput at Bulk Density of: - 35 kg/m³: 1.8 t/hour - 60 kg/m³: 2.5 t/hour - 100 kg/m³: 3.1 t/hour Transport Dimensions (Baler only): 4,200 x 1,640 x 2,200 mm (L x W x H) Machine Weight (Baler): approx. 4 t Remarks: The baler has been function-tested in our workshop, subsequently stored, and is thus available at short notice. Complete machine documentation (operating manual, CE certificate, electrical and hydraulic schematics) is available. Viewing by appointment is possible. We assume no liability for the technical specifications or possible errors. Ncedpju Thh Eefx Ah Uot

Stanje: rabljeno, Ravnostapni podajalnik in paralelna zgibalka Stahl KC 56/6-KTL za zgibanje 16 strani s križnim zgibom in 6 žepki ter 2 noža s stranskim žepkom Nedpfxeyw Hg Ss Ah Usct