Seco/Wawick Tovarna Peči Za Aluminij nakup rabljenega (94.170)

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2023, All wear parts new only 704 operating hours Special price for lightly used demonstration machine Base machine: €29,990 net Options at extra cost: - Cooling unit: €3,995 net - Emulsion tank: €3,990 net The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, graphite and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by a robust design that ensures consistent briquette quality during continuous operation. The compaction process is carried out without the addition of binding agents, relying solely on hydraulic pressing force. Depending on the material, the volume of the input material can be reduced by up to 90%. Throughput capacity: up to max. 70 kg/h (material-dependent), Briquette diameter: Ø 50 mm, Motor: 5.5 kW, 400 Volt / 50 Hz / 3 phase, Pump: 40 litres Max. briquette length: 50 mm, Kjdpfxed N Dnhs Abyena Optimal briquette length: 40 mm, Silo diameter: 1,000 mm, Oil tank: 110 litres Dimensions: 1750 x 1130 x 1100 mm (L x W x H) Weight: 950 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Fill level sensor: yes Requirements for the input material - Max. chip length: 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Max. weight on agitator: 150 kg - The feed material must be free from ferrous metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Ideal for shredding polystyrene (EPS) or similar materials. Knjdpfx Aeh S H T Uobyoa Throughput is highly dependent on screen and input material: - Up to 60 kg/h with EPS using a 15 mm screen *The coarser the screen, the higher the throughput. Motor: 9.2 / 11 kW, 400 Volt Robust steel construction Hardened cutting blades Screen with interchangeable inserts, optionally available in (8), (10), 15, 22, 26, 30, 40, or 60 mm perforations With electric drive: star-delta switch, overload protection, and 8 m power cable – plug-ready Blow-out nozzle 150 mm, optional for plastic or grain pipes Blowing range approx. 12 m Chassis with 2 running wheels (Ø 380 mm) and one swiveling support wheel (Ø 125 mm), all wheels with solid rubber tires Dimensions (LxWxH): approx. 1200 x 900 x 1270/1400 mm Weight: approx. 240 kg Spare parts and options: 24 hardened blades, each €9.90 (net) 6 bolts, each €14.90 (net) 1 screen €475 (net) Cover €290 (net)

Stanje: novo, Leto izdelave: 2026, Single-Shaft Shredder MRZ 530 Kedpfxod Db N Is Abyjna Included: + Profile rotor for increased throughput performance Options: Double knife row + €895 net Veneer and paper stripper + €970 net * recommended for extremely thin materials with a thickness less than 3 mm Our mütek single-shaft shredder MRZ 530 processes a wide range of materials such as all types of wood waste, softwood, chipboard and hardboard, pallets, construction timber, demolition wood, carpet, cables, paper, cardboard, and plastics. The machine is characterized by its robust construction, which guarantees consistent quality during continuous operation. We are happy to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight carrier, and we will document the test with photos and videos. Machine data: Motor: 15 kW; 400 V - 50 Hz - 3 ph, Knives: reversible multiple times, Rotor diameter: 260 mm, Control: Siemens S7-1200 PLC, Hopper (mm): 510 x 810 mm, Hopper volume approx. 0.4 cbm, Throughput capacity: 1 – 5 hopper fillings/h, Hydraulically operated pusher, Screen perforation as required (10 – 40 mm), Suction connection Ø 160 mm, Weight approx. 1,000 kg, Dimensions approx. 1550 x 1100 x 1640 mm, Moisture content of raw material: must be below 30% absolutely dry. Standard features: • Fast hydraulic system • Profile rotor • Control cabinet with Siemens PLC control • Automatic star-delta start-up • Automatic shutdown in case of idling rotor • Removable extraction chute • Rotation speed 70 – 100 rpm for higher throughput • Intermittent control to avoid idle times • Performance-enhancing step control of the hydraulic pusher • Stable guides for the hydraulic pusher Additional shredder options: - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable 0-60 degrees Discharge height: approx. 2000 mm +/- 100 mm - Overband magnet + €5,980 net - Synchronised control for conveyor and overband magnet + €2,750 net (Start and stop synchronised with the shredder) Requirements for input or raw material: - Moisture content (absolutely dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc., cause increased wear

Stanje: novo, Leto izdelave: 2026, Idealni stroj za drobljenje mehkega lesa. . Motor: 11/15 kW; 400 V - 50 Hz - 3 fazni, Premer rotorja: 260 mm, hidravlično vodeno potisno kolo Sito po izbiri (12 - 40 mm) Priključek za odsesavanje Ø 160 mm Teža cca 1.100 kg Mere (d x š x v) cca 1805 x 1118 x 1650 mm Barva: modra / siva Zahteve za surovino: - Vsebnost vlage (atro) mora biti pod 30 % - Kovine in mineralne nečistoče, kot so pesek, kamni itd., povzročajo povečano obrabo. . Knedswzarcopfx Abyea Z veseljem vam ponudimo brezplačen preizkus z vašim materialom. Vabimo vas k nam v Neckartailfingen. Prav tako je možno, da nam material pošljete prek špedicije in mi test dokumentiramo s fotografijami in videi.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, Rabljena avtomatska krožna žaga za aluminij MEP Cobra 352 nc 5.0 Letnik 2017 Dimenzije lista: 350x32x3,4mm Rezalna hitrost list: 1700/3400 rpm Kot reza : od -45°do +45° Kapaciteta reza: pri 0°: okroglo: 120mm, kvadrat: 105mm , pravokotnik 180x70mm Zaslon na dotik Kedpfx Aswu Tz Rsbyjna Teža stroja: 605kg

Stanje: novo, Leto izdelave: 2024, Underground Light-Alloy Circular Saw Brand: METALLKRAFT Knedpfx Aotuch Ejbysa Model: ULMS 420 Article No.: 3627420 Condition: New machine Cutting range (square): 120 x 120 mm Speed: 2900 rpm Standard features include: - Saw blade 420 x 30 x 4.0 mm Z 120 - Minimum quantity lubrication system - Compressed air gun and spiral hose - Two extraction ports for connection to a dust extraction system - Operating manual

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, moč: 75 kW (101,97 KM), Prodam popolnoma delujočo linijo za proizvodnjo peletov. Kedpow Ry U Isfx Abyona

Stanje: novo, Bag opener, suitable for opening bagged materials such as 'Gelber Sack' (yellow bag) and similar. Can be used as a stand-alone unit or integrated as a component in, for example, a sorting plant. Throughput: 6-7 t/h Drive power: approx. 18 kW Dimensions: 8000 x 2350 x 2700 mm Weight: 11 t Ksdpfx Aedxwlzobyona Made to order Delivery time approx. 30 weeks Further data and quotation available upon request.

Leto izdelave: 2004, stanje: rabljeno, Najv. premer žaginega lista: 500 mm Območje reza do 80 x 200 mm Dolžina podajanja: maks. 800 mm z digitalnim prikazovalnikom Hitrost žaginega lista: 2 obr./min Števec kosov z avtomatskim izklopom ob doseženi nastavljeni vrednosti Brezstopenjsko nastavljiv pnevmatski podajalnik materiala Hidropnevmatski podajalnik žage Pnevmatske vpenjalke materiala Knjdpfx Absxn Iq Doyoa Naprava za pršenje Vključuje navodila za uporabo Dimenzije stroja: 2100 x 1100 x 1500 mm (ŠxDxV) 1000 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Tehnično stanje zelo dobro Pripravljena za delo Stroj prilagojen za rezanje aluminija in PVC Upravljanje E 580 Premer žaginih listov 500 mm Knodpszgu Efjfx Abyoa Rezanje po zunanji dimenziji, brez korekcije Samodejno spuščanje in dviganje zaščit žaginega lista Pnevmatično nastavljanje kota 45-90 stopinj Tiskalnik

Leto izdelave: 2012, stanje: rabljeno, Maks. premer žaginega lista: 530 mm Kapaciteta reza pri 90° Okroglo 180 mm, Kvadrat 170 mm, Pravokotnik 380x70 mm Kapaciteta reza pri 45° levo Okroglo 180 mm, Kvadrat 150 mm, Pravokotnik 290x70 mm Kapaciteta reza pri 45° desno Okroglo 180 mm, Kvadrat 150 mm, Pravokotnik 290x70 mm Digitalni prikaz kota za žagino mizo Obseg vrtenja žagine mize 180° Kodpfx Abjzabmqjysna Pršilna naprava Dvoročno upravljanje

Stanje: rabljeno, Dvoglava kotna žaga RAPID tip DGL 5000 / 500 Potreben popravila – krmilje ne deluje Leto izdelave: 1993 Dolžina reza: 5000 mm Najkrajša dolžina obdelovanca: 350 mm Premer žaginega lista: 500 mm - Krmilje ne deluje Dimenzije (D x Š x V): 7200 x 1700 x 1850 mm Knedpfx Ajyxy S Dsbysa Teža: 1250 kg Sprostimo prostor Ugodni stroj – idealno za izvoz

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Aluminium profile mitre saw, manufacturer: Dry Tech Knodpfxstwn E Ue Abyoa Model: 355 MLS, year of manufacture: 2002. Saw blade diameter: 355 mm Cutting capacity: - Round material: max. 120 mm - Square material: max. 120 mm x 120 mm

Stanje: novo, Leto izdelave: 2025, premer žaginega lista: 400 mm, - Saw blade 400 mm - Double mitre Ksdpfx Aou Si Ndebyena - 4 pneumatic clamps - Mist lubrication system - Air blow gun - Protective cover - Documentation - 400V

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Nagib rezila -45° / +45°. Največja odprtina primeža 180 mm. Največja dolžina brez podajalnika 385 mm. Premer diska 350 mm. Hitrost vrtenja rezila 1700 / 3400 vrt/min - 2 hitrosti. Kedpfx Abox Hw Sqeyjna

Leto izdelave: 2018, stanje: rabljeno, Podtalna ročna krožna žaga za žagin list do D 250 mm Obseg nagiba za poševne reze -45°/90°/+30° Delovno območje (Okrugla) 90° 80 mm (Okrugla) 45° 80 mm Knjdpfey Nm N Rox Abyea (Kvadratna) 90° 70 mm (Kvadratna) 45° 65 mm 220 V

Leto izdelave: 2004, stanje: dober (rabljeno), Podtalna žaga Knodpfoy Nm Hiex Abyea ročna uporaba za žagin list do premera 300 mm zajem pod kotom levo-desno do 45° ročna pršilna naprava za emulzijo robustno ohišje iz jekla in delovna miza iz sive litine 400V premična na podstavku

Stanje: dober (rabljeno), Leto izdelave: 2016, premer žaginega lista: 600 mm, vrsta vhodnega toka: trifazni, obratovalni tlak: 8 letvica, Industrijski aluminijasti žagalni stroj, ki samodejno reže z uporabo pnevmatskega dvo-gumbnega upravljanja, pri čemer je obdelovanec dvakrat pnevmatsko vpet. Vpenjanje je nastavljivo tako vodoravno kot navpično. Poleg tega je ta žagalni stroj opremljen z megličnim mazalnim sistemom, ki izboljša proces rezanja. Podajanje žaginega lista je na tej napravi nastavljivo. Knodpfx Abezf U Tmjyea Lastnosti: - samodejno gibanje žage - dvojno pnevmatsko vpenjanje - žagin list se premika od spodaj navzgor - žagin list iz trdo kovine - nastavljiva hitrost žaganja - dolžinski naslon - mazalni in redukcijski sistem - razpršilna instalacija - zračno pištolo - rezanje pod kotom - samodejno in ročno žaganje Stroj je nameščen in se dostavi montiran. Testiranje je možno.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1989, Popolna proizvodnja betonskih tlakovcev Knsdpfxey Sin Uj Abyoa Proizvajalec: Schlosser Krmiljenje v celoti obnovljeno leta 2019 Proizvodnja tlakovcev, travnih rešetk ... Sušenje Paletirna linija

Stanje: dober (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 600 mm, Obseg rezanja okroglega jekla pri 90°: 220 mm, For sale: 1 used CNC aluminum circular saw automatic including extraction unit Manufacturer: Tronzadoras MG Ksdpfjuyyhaex Abysna Model: GAA-600 - CNC Year: 2015 TECHNICAL DATA • Cutting range round: 220 mm, rectangle: 300 x 90 mm, square: 175 mm • Drive power: 4.1 kW / 400 V / 50 Hz • Speed: 3,000 rpm • Cutting speed: 55 m/sec • Blade dimensions: 600 x 50 mm • Max. cutting height: 220 mm • Dimensions: 2,020 x 1,510 x 975 mm • Weight: 650 kg The machine comes complete with a 6 m infeed roller conveyor and matching extraction unit. The saw can be inspected at our warehouse in 09599 Freiberg.

Stanje: novo, Leto izdelave: 2026, Product Innovation: Sawing Line Type "ORIX" The ORIX sawing line enables fully automatic processing of a wide variety of aluminium profiles. The machine features a sturdy base frame. For the positioning of the saw unit, linear guides and precision carriages are used. The drives are equipped with servo motors. During the cutting process, the saw unit moves forward 300 mm along the Y-axis, making it possible to cut special profiles, plates, as well as Item and Bosch profiles with ease. The support table consists of movable rollers that are automatically positioned according to the required cut length. All rollers are also mounted on precision linear carriages. Additionally, the saw features a robust discharge table where the cut aluminium parts are deposited. (Optionally, cut parts can also be transported directly away on a conveyor belt, including the removal of chips.) The machine is available with a cut length of 6,000 mm, bringing the total length to 7,000 mm. The saw line is delivered with a matching 2-channel minimum quantity spray system. The system can be fitted with either a 400 mm or 600 mm saw blade. Your benefits: • Hardly any scratches, as the material is not slid over a cast iron table • Improved disposal of saw chips (no extraction necessary) Kedpsfu Tgrefx Abyjna • Extremely compact footprint: 4,000 mm / 7,000 mm • Smaller residual piece (50 mm residual length) • Safe operation (light curtain) • Easy material removal (conveyor belt or brush table) • No need for resetting as required with standard automatic saws • No loss of dimensions • Plug-in rollers accommodate any special profile form-fit for perfect cutting results Operating Process Enter the profile length into the control unit. The saw unit then moves to the specified length. The operator loads the aluminium profile and starts the machine. The saw locates the head cut position via a head cut recognition sensor. The head cut is executed. After cutting, the saw unit retracts and is repositioned to the next specified coordinate to repeat the cutting process. These operations repeat until the profile has been fully cut. All parts are gently deposited on the discharge table or conveyor belt. Material clamping is performed, as in conventional aluminium saws, by vertical and horizontal clamps directly at the saw unit. Once the profile is cut, the saw unit automatically moves back to the next loading position. The process can then be repeated. Optionally, cross feeders for automated profile feed can be used. For safety, fences or a light curtain can be integrated. The control system is available in two versions: 1) Diethei control, 2) Siemens control. Optional sorting of materials into various containers or by length is also possible. You are welcome to visit and inspect the machine at any time in our production/showroom facility. Please feel free to contact us! We look forward to your enquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, The fully automatic aluminium circular saw UK 350 A 90° CNC + drilling unit (cutting angle 90°) has been specifically developed for cutting profile and solid materials made of aluminium castings, copper, and hard plastics. An automatic material feed as well as automatic cutting motion make it ideal for fast and precise series production! Material feed is up to 700 mm per stroke. Multiple strokes for longer sections can be conveniently programmed from the control panel. The main vice clamps the material using two horizontal and two vertical clamping cylinders; the feed vice uses one horizontal and one vertical clamping cylinder. Cutting and feed speeds are adjustable according to the material being processed via the large, clearly laid out control panel. The machine features a mechanical stroke height adjustment, with a maximum cutting height of 100 mm. A large protective hood covers the entire working area and is pneumatically lifted at the push of a button. The standard configuration for the UK 350 A 90° CNC + drilling unit includes an air blow gun for cleaning the machine. Connections for chip extraction systems are provided. This machine is equipped with the TR 14 vertical drilling unit (drilling capacity up to ø 14 mm, thread M12), which is integrated into the cycle control of the aluminium circular saw. Equipment: • Machine for 90° cuts, with powerful drive motor • CNC control; input of quantity and section length conveniently via the large, user-friendly control panel • Storage for up to 20 cutting programs • Servo-driven feed; single stroke feed up to 700 mm (for longer sections, the feed is automatically repeated up to the desired length) • Main vice with 4 pneumatic clamping cylinders – 2 horizontal, 2 vertical • Feed vice with pneumatic horizontal and vertical clamping cylinders • Large protective hood, covers the entire working area, pneumatically lifted • Variable adjustment of cutting and feed speed • Maximum cutting height 100 mm • Air blow gun for machine cleaning • Connections for extraction system • Saw blade ø 350 mm • TR 14, fixed automatic drilling unit with tool holder • Spindle speed, drilling depth, etc. are set via the machine control; drilling cycle is automatic Technical Data: Drive power: 1.9 kW / 400 V / 50 Hz Speed: 3000 rpm Blade size: 350 x 32 mm Material feed per stroke: 700 mm Max. cutting height: 100 mm Dimensions: 1400 x 850 x 970 mm Optional loading magazine available! We look forward to your inquiry! Plantec Maschinen GmbH Ksdpfxjkqz H Ds Abysna

Stanje: novo, Leto izdelave: 2026, Aluminum Circular Saw UK 600 HA 90°, Semi-automatic The semi-automatic circular saw UK 600 HA 90° is an upcut machine, primarily used for cutting profile material made of cast aluminum, copper, and hard plastics (solid material only to a limited extent). The machine stands out for its simple operation and quick, convenient material changes. Please note that only 90° cuts are possible with this machine! The saw feed is automatic via push button. Material clamping is done by two pneumatically operated vertical and two horizontal clamping cylinders. The standard equipment includes a minimum quantity lubrication system and an air spray gun for cleaning the machine! Ports for a chip extraction system are provided. In addition, the machine can optionally be equipped with a digital mitre angle display, a marking laser, and a pneumatic system for lifting the safety hood. Equipment: - Large worktable, powerful drive motor - Two-button control for initiating the cutting process (optional single-button control available) - Clearly arranged control panel - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic saw blade lift with oil level indicator - Fixed material support jaw can be moved backwards to increase cutting capacity - Large safety hood fully covers the working area - Minimum quantity lubrication system with 2-liter reservoir - Adjustable blade/feed rate - Air gun for cleaning the machine - Saw blade diameter: 600 mm Operation Sequence: 1. Set the cutting angle 2. Insert the material 3. Adjust the lifting speed 4. Bring the clamping cylinders up to 20 mm near the material 5. Clamp the material 6. Press the start button; the machine is ready for operation 7. Press and hold both SAW buttons; the material will be cut 8. At the end of the cycle, release both SAW buttons and press the STOP button 9. Open the clamp and remove or advance the material Kedjpa Nxdspfx Abyjna Technical data such as cutting range, output, etc. (see data sheet in email attachment). We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, Aluminum Circular Saw UK 650 HA, Semi-automatic The semi-automatic circular saw UK 650 HA is an upcut machine primarily used for cutting profile materials made of aluminum castings, copper, and hard plastics (solid material only to a limited extent). The machine is distinguished by its user-friendly operation, quick and convenient material changeover, and easy miter angle adjustment. The UK 650 HA features a continuously adjustable miter range to the left and right up to 20° (pivoting range twice 70°). The saw feed operates automatically at the press of a button, while material clamping is achieved via two pneumatically controlled vertical and two horizontal clamping cylinders. Standard equipment includes a minimum quantity lubrication system and an air gun for cleaning the machine! This machine is also fitted with connections for a chip extraction system. Furthermore, optional accessories include a digital miter angle display, a marking laser, and a pneumatic device for lifting the safety hood. Equipment: - Double miter 20° – 90° – 20°, large support table - High-performance main drive motor - Two-button control for initiating the sawing cycle (optional one-button control available) - Clearly arranged control panel Kjdpoidun Djfx Abysna - Adjustable blade/feed rate - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic saw blade lifting with oil level indicator - Fixed material fence can be repositioned to the rear to increase cutting capacity - Large safety hood covering the entire work area - Minimum quantity lubrication system with 2-liter reservoir - Air gun for cleaning the machine - Saw blade ø 650 mm Operating Procedure: 1. Set the cutting angle 2. Insert the material 3. Adjust the lift speed 4. Bring the clamping cylinders to within 20 mm of the material 5. Clamp the material 6. By pressing the start button, the machine is ready for operation. 7. Press and hold both SAW buttons; the material will be cut. 8. Upon cycle completion, release both SAW buttons and press the STOP button 9. Open the clamping vise and remove or advance the material You are welcome to visit and view the desired system in our manufacturing/demo hall at any time. Please feel free to contact us regarding this matter. We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, Aluminium Circular Saw UK 352 P, manual The semi-automatic circular saw UK 352 P is an "upcut" machine and is primarily used for cutting profile materials made of aluminum castings, copper, and hard plastics (solid materials only to a limited extent). The machine is characterized by its ease of use, quick and convenient material change, and simple mitre angle adjustment. The UK 352 P features a continuously adjustable mitre range—up to 45° to the left and up to 0° to the right. The saw feed is automatic at the push of a button, while material clamping is performed by two pneumatically controlled vertical clamping cylinders. The standard scope of delivery includes a minimum quantity lubrication system and an air blow gun for cleaning the machine. The machine is equipped with connections for a chip extraction system. Features: - Manual guidance of the saw blade - Double mitre 30° – 90° – 0°, large support plate - High-performance drive motor - Clearly structured control panel - Two vertical pneumatic clamping cylinders - Fixed material stop, can be moved back to increase cutting capacity - Large protective cover, fully shields the working area - Minimum quantity lubrication system - Air blow gun for cleaning the machine - Saw blade Ø 350 mm Work Process: 1) Set the cutting angle 2) Insert the material 3) Position the clamping cylinders up to 20 mm from the material 4) Pneumatically clamp the material Kjdpsidunvofx Abysna 5) Press the start button to activate the saw blade 6) The cutting operation must be carried out manually using the hand lever 7) After completing the cut, switch off the machine! You are welcome to inspect the desired machine in our production/demo hall at any time. Please feel free to contact us regarding this. We look forward to your inquiry! Plantec Maschinen GmbH