Krožna žaga za lahke kovine / aluminij

Tronzadoras MG GAA-600 - CNC

Stanje: novo, Pre-bending: 13.0 mm Working length: 3100 mm Plate thickness: 16.0 mm Total power requirement: 17.5 kW Approx. weight: 11,600 kg Dimensions (LxWxH): 5.31 x 1.66 x 1.59 m Image similar Bending capacity: 16.0 mm » at 3x top roll diameter Pre-bending: 13.0 mm » at 1.5x top roll diameter Top roll diameter: 300 mm Bottom roll diameter: 270 mm Side roll diameter: 210 mm Maximum opening: 50 mm Working height: 1140 mm • Fully hydraulic drive of top and bottom rolls via planetary gearbox • Digital display for side roll positions • Hydraulic drop-end bearing • Cone bending device • Hardened rolls Fedpfx Ajd Auacjfljpb • Hydraulic adjustment of side rolls synchronized via PLC • Hydraulic adjustment of bottom roll via torsion shaft • Pressure-adjustable bottom roll • Electrical and hydraulic overload protection • Movable control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment in compliance with CE regulations Important notes on cone rolling: • The maximum sheet thickness is 50% of the rated capacity • The cone length may be max. 30% or must be more than 60% of the roll length • Hardened rolls are recommended

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, CNC brusilni stroj za orodja Walter Helitronic Power FH, s paletnim nakladalcem za valjaste obdelovance, z 8-kratnim menjalnikom brusnih plošč, z elektrostatičnim odstranjevalcem izparin, s sistemom za gašenje požara, s črpalko za oljno oskrbo, programska oprema Walter-Window-Mode in Toolstudio. Programski paketi: 001,002,003,016,017,026,090,091,098,099,032, Helicone, Helidrill, Heliflute, NC-Mode, Power-IMS, Toolstudio_Standard, s pripravo za hidravlično napravo (Lynette). Brusilno vreteno (eno-vreteno) je neposredno gnano in opremljeno z oljnim hladilnikom. Motor z votlo gredjo za os A ima hitrost 0-750 1/min. Osi C, X, Z in A so bile obnovljene leta 2022. Fjdpjx E Dfbofx Aflspb

Stanje: zelo dobro (rabljeno), Leto izdelave: 1977, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 100 mm Fpedpfx Afsunt Eyelob Grinding wheel diameter: 360 mm Total power requirement: kW Machine weight approx. 3.8 t Space requirement approx. 3.5 x 1.3 x 1.5 m Machine in very good condition! External and internal spindle. Extensive accessories included.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 52.000 mm, skupna širina: 24.000 mm, skupna višina: 10.500 mm, vhodna napetost: 400 V, delovna višina: 1.050 mm, skupna masa: 2.000 kg, priključek za stisnjen zrak: 6 letvica, premer vrtanja: 180 mm, zračni tlak: 6 letvica, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: Klimatska naprava, moč: 2,5 kW (3,40 KM), 8. Sept. | Bohrmaschinen METRAL Doppelkopf-Bohrmaschine TD3-2000, Baujahr 2003, 2023 komplett überholt Technische Daten: Fsdpfx Aerg E Hceflopb Glasstärke: 2–50 mm Bohrdurchmesser: 3–180 mm Gewicht ohne Rollentisch: 775 kg Anschlussleistung: 2,5 kW Abmessungen ohne Rollentisch: 1,3 x 1,7 x 1,2 m Abmessungen Rollentisch: 5,2 x 2,4 m / Höhe 1050 mm / ±25 mm Maximaler Abstand Maschinenrahmen zu Bohrzentrum:

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Fjdpfefg E Hpox Aflepb Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: pripravljen za uporabo (rabljen), TOS STROJ ZA REZANJE ZOBNIKOV FO16 maks. premer kolesa 1600 mm širina zobnika 560 mm maks. modul 16 maks. teža obdelovanca 7000 kg površina mize 1350 mm območje vrtljajev mize 16 – 80 o/min pomiki – aksialno 0,05 – 1,5 mm/min pomiki – radialno 0,25 – 6 mm/min pomiki – tangentno 0,13 – 4 mm/min elektrika – napetost/frekvenca 380/50 V/Hz skupna potreba po moči 12 kW teža stroja cca 18,5 t Fpsdpfx Aexwl R Tjflsb dimenzije stroja cca 4,3 x 2,0 x 3,2 m Stroj ima še eno glavo, menjalna kolesa in vretena Na voljo je video z delovanjem stroja pod obremenitvijo

Leto izdelave: 1970, Stanje: nepreverjeno (rabljeno), Offered here is a balancing machine from Trebel. The machine features a robust steel protective hood. Offered for refurbishment, as the control cabinet is missing! Fedpfshikdwox Aflspb Technical data: Manufacturer: Trebel Type: FC4c-xn Year of manufacture: 1970/74 Standard weight range up to 400 kg Max. permissible load per block: 200 kg

Stanje: novo, Saw blade diameter: 370 mm Cutting range at 90°: round 120 mm Cutting range at 90°: square 100 mm Cutting range at 90°: rectangle 180x100 mm Working height: 925 mm Fpedpfxsd Iin Ej Afleb Saw blade speed: 17 – 70 rpm Total power requirement: 3.0 kW Machine weight approx.: t Space requirements approx.: 1.9 x 1.45 x 2.1 m SPECIAL OFFER PRICE!!! High-performance vertical circular saw, hydropneumatic fully automatic (20195) · Mitre cutting: left 60° & right 45° · Hydro-pneumatic control of the saw unit · Electro-pneumatic material feed unit · Smooth-running, powerful worm gear drive with large gear ratio, integrated in a robust cast housing for optimal cutting results · Vise with double clamping arm for burr-free cuts, additionally with lateral quick-shift for mitre changes · Precision prismatic guideway for gearbox head, laterally adjustable · Particularly robust base frame with built-in cooling system · Large chip drawer · Chip removal brush integrated in the saw blade cover CNC Control: · With control panel for more than 90 different sawing programs with 99 sub-programs for length, quantity, and angle · Automatic feed unit 2,000 mm via ball screw, incremental feed with automatic length compensation. Adjustable for cut lengths from 25 to 9,999 mm. · Fully hydraulic control of saw frame and clamping fixtures · Preselection of 3 different material feed rates · Visualization of the complete work process with simple data input ATTENTION: Price does not include saw blade! (Saw blade price: €204)

Stanje: novo, Automatic Mitre Saw UK-450 - Saw blade diameter: 450 mm - Processing length according to customer specifications - Automatic positioning - Automatic mitre adjustment (up to +/- 60°) - Applications: Wood, plastic, and aluminium processing - Infeed conveyor as smooth track (optional roller conveyor available) Fjdpfx Afed A Ttxslspb Further technical details and information available on request.

Stanje: rabljeno, Cisaille guillotine hydraulique STEINER type HTS 30/20 R N° de machine : 315 Année : 1982 Longueur de coupe : 3050 mm Épaisseur de coupe : 20 mm Butée arrière : 800 mm motorisée Puissance moteur : env. 30 kW Alimentation : 400 V, 50 Hz Fodpsd Hxx Aefx Afljpb - Butée arrière avec commande de positionnement ELGO - Réglage de la butée arrière par vis à billes - Barrière immatérielle de sécurité SICK à l’avant comme protection contre l’intrusion - 3 bras-supports de tôle avec rouleaux à billes - Pédale électrique - Lames de rechange - Refroidisseur d’huile avec échangeur thermique à air - Machine très massive, construction très robuste Encombrement de la machine de base (L x l x h) : 4650 x 2610 x 3200 mm Poids de la machine de base : 27 000 kg Dimensions de transport (machine de base) (L x l x h) : 4650 x 2610 x 3200 mm Dimensions de transport (supplémentaire) (L x l x h) : 3500 x 2450 x 1400 mm Poids total : 27 000 kg Bon état Machine visible dans notre dépôt à 37235 Hessisch Lichtenau, essais de coupe possibles.