Avtomatska žaga za aluminij Pressta Eisele Profilma 500

Pressta Eisele Profilma 500

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Overhauled: 2024 Year of manufacture: 1994-2000 Saw blade: 560 mm Motor power: 6.5 / 8.0 kW Rotation speed: 1,500/3,000 rpm Cutting speed: 2,100 – 4,200 m/min Saw height adjustment: electronic Working range (square): max. 170 x 170 mm Working range (flat): max. 300 x 150 mm Working range (round): max. 200 mm Saw feed rate: 0 – 40 mm/s, continuously adjustable Cut length: 5-950 mm (extension to 9,999 mm via multiple stroke) Feed speed (max.): 500 mm/s Weight: approx. 1,900 kg Dimensions (LxWxH): 2,200 mm x 2,700 mm x 1,950 mm The machine is in as-new technical and visual condition following a completed retrofit. Thanks to its equipment and design, the machine is highly efficient and versatile for a wide range of applications. The programmed HMI control system ensures easy and highly profitable operation of the plant. The soundproof cabin minimizes noise emissions to a very low level. The machine is fully overhauled at our premises according to customer specifications. Among others, the following components are renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Replacement of the ball screw spindle - Replacement of servo motor and servo drive - New electrical components - New pneumatic lines - New pneumatic components - Overhaul or replacement of all pneumatic cylinders - Renewal of valve terminal - Optimization of extraction performance - Overhaul of the minimum quantity lubrication system - Replacement of general wear parts - Overhaul of the cabin Additional machine features: - Soundproof enclosure - Kerf expansion (for high-quality cut surfaces without return marks) - Fully electronic height adjustment Warranty: Unless otherwise agreed upon, we provide a 6-month warranty for our systems on all parts overhauled or replaced by us. Labor costs and wear parts are excluded from the warranty. Optional (available on request): Gedpfx Aeuiy Hrsb Eeuh - Bar clamping device for parallel sawing of multiple workpieces - Flat magazine for automatic loading of pre-materials up to 6 meters in length - Roller conveyors for pre-material - Reinforced 18.0 kW (frequency-controlled) motor - Delivery and installation at your facility - Training for your personnel

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2024, Completely overhauled: 2024 Control system: Siemens S7 PLC Saw blade max.: 500 mm Motor power: 4.0 kW Saw blade feed: 0–40 mm/s, infinitely adjustable Electronic saw height control Working range, square at 90° max.: 130 x 130 mm Working range, flat at 90° max.: 190 x 130 mm Working range, round at 90° max.: 170 mm The machine has been completely overhauled in-house and is in as-new condition. Among other improvements, the following upgrades have been performed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Conversion to pusher with servo control - New electrical components - New pneumatic hoses - New pneumatic components - Conversion to valve manifold - Enhanced extraction performance - New minimum quantity lubrication system - Replacement of general wear parts - Refurbishment of the enclosure The machine is further equipped with: - Minimum quantity lubrication - Chip separator extension (for high-quality cut surfaces without return marks) - Preload magazine for careful handling of painted/anodized surfaces - Scrap piece ejection via pusher - Hinged scrap piece tray Optional features: Gusdpfxjuiy Ngj Ab Eeh - Magazine width: 3000 mm - Pusher length: 6000 mm - Pusher length: 8000 mm - Motor upgrade: 5.5 kW - Bar clamping device for parallel cutting of multiple workpieces - Online support connection - Delivery and commissioning at your facility - Operator training

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 30.000 mm, skupna višina: 4.300 mm, skupna širina: 6.500 mm, teža obdelovanca (maks.): 100 kg, temperatura: 220 °C, ogrevalna zmogljivost: 80 kW (108,77 KM), višina obdelovanca (maks.): 1.200 mm, dolžina obdelovanca (maks.): 2.500 mm, izolacijski material: Mineralwolle 75 kg/m³, debelina izolacije: 150 mm, širina obdelovanca (maks.): 800 mm, Oprema: osvetlitev, Popolnoma avtomatska linija za nanašanje praškovih premazov (tekoči transport, predobdelava, nanašanje s sistemom Wagner, peči) Prodaja se profesionalna, popolnoma avtomatska linija za nanašanje praškovih premazov, zasnovana kot tekoča linija (ciklični sistem) podjetja Klaus Benecke. Linija je idealna za učinkovito nanašanje premazov na aluminijaste komponente in druge kovinske izdelke. Individualna prilagoditev linije je možna po dogovoru! Glavne značilnosti in ključne komponente: - Kemijska predobdelava: 2-stopenjska brizgalna komora (D=3.600 mm, Š=1.500 mm, V=2.250 mm), vključno z razmaščevanjem/fosfatiranjem in izpiralnim območjem s brizgalno rameno. - Sušilnik za predhodni premaz: tekoča peč do 120 °C s 40 kW gorilnikom za utekočinjeni naftni plin (Riello). (možna druga vrsta oskrbe z energijo) - Kabina za nanašanje praškovih premazov PVC 3.600: antistatična plastična kabina z monociklonom (sesalna moč 12.000 m³/h) in dodatnim filtrom. - Wagner Premium sistem za nanašanje: 2 dvižna mehanizma, 6 avtomatskih pištol PEA-C4, 2 ročni pištoli in krmilnik, zasnovan za do 10 pištol. - Peč za strjevanje: tekoča peč do 220 °C s 80 kW gorilnikom za utekočinjeni naftni plin (Riello). (možna druga vrsta oskrbe z energijo) - Transportni sistem: Cardin verižni transporter C-100 v cikličnem načinu (50 m transportne poti, 54 m verige). - Krmilnik: sodoben PLC krmilnik z 7-palčnim barvnim zaslonom (Easy View), pretvornikom in modemom za oddaljeno vzdrževanje. Tehnični podatki: - Vrsta linije: linija za nanašanje praškovih premazov (tekoči / ciklični sistem) - Največje dimenzije obdelovancev: (D x Š x V) 2.500 x 800 x 1.200 [mm] - Največja obremenitev na nosilec: 100 kg/prečka - Ocena proizvodne zmogljivosti: pribl. 50 m²/h (oba strani) - Material: aluminij / kovinski deli - Transportni trak: veriga Cardin C-100 (50 m) - Moč gorilnika: sušilnik / peč 40 kW / 80 kW (utekočinjeni naftni plin ali drug vir energije na zahtevo) - Krmilnik: PLC s 7-palčnim zaslonom na dotik - Stanje: nova linija / projekt Komponente v obsegu dobave: Guodoum Uflspfx Ab Esh - Kemijska predobdelava (2-stopenjska brizgalna komora) - Sušilnik za predhodni premaz - Sistem za nanašanje praškovih premazov (PCB 3.600) - Wagner sistem za nanašanje - Peč za strjevanje praškovih premazov - Transportni sistem - Električni krmilnik - Storitve in dodatna oprema

Stanje: rabljeno, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Godpfx Ajuz If Nob Eouh Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of Manufacture: 2007 Rolling Force: max. 24 tons Tool Diameter: max. 270 mm Roll Spindle Diameter: 69.85 mm Tool Bore Diameter: 70 mm (nominal diameter) Mounting Length, Tool Length: max. 180 mm Workpiece Diameter: max. 50 mm Hydraulic Motor Power: 3 kW Roll Drive Motor Power: approx. 5.5 kW Mains Connection: 400 Volt, 50 Hz, 10 kW - Pivoting roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gear shift - Hydraulic system integrated in machine frame - Operating manual with electrical diagram Space requirements (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge rolling: The thread rolling dies, with the same pitch as the workpiece, form the thread by pressing into the workpiece up to the nominal diameter. The thread length is at most as long as the width of the rolling dies. Through-feed rolling: Used when the thread length exceeds the width of the rolling dies. Through-feed dies have three functional zones – lead-in, calibration, and lead-out. Knurling Rolls: These rolls have no pitch and are swiveled at the pitch angle of the profile to be rolled. Pitch Rolls: Pitch rolls have a profile with a pitch, differing from knurling rolls. The sum of the pitch angle and swivel angle determines the pitch angle in the finished workpiece.

Stanje: zelo dobro (rabljeno), Kotni spajalni stroj Pressta Esiele PV10 P Guodpfx Asl Skl Ijb Eeh Dostava po EU ~350 evrov

Stanje: novo, Saw blade diameter 350 x Ø 30/40 mm Cutting diameter 135 mm Cutting length 430 mm Saw blade dimensions 350x3.0/2.4x40 mm Speed 3800 rpm Extraction port diameter 100 mm Total power requirement 3.0 kW Machine weight approx. 100 kg Space requirement approx. 1300 x 800 x 1600 mm - Cross-cut and mitre circular saw for cross-cutting operations - Double-sided mitre adjustment (60° / 45°) with fixed stops - One-sided compound cut up to 45°, with fixed stop - Robust cast iron construction - Precision linear ball bearing guide for the tool carriage on hardened and ground steel shafts - Manual saw feed - Saw blade height infinitely adjustable - Port for optional dust extraction Cutting data: - Cutting length at 90° = 430 mm - Cutting height at 90° = 135 mm - Cutting length at 45° = 310 mm - Cutting height at 45° = 92 mm Special accessories included: - 1x TCT circular saw blade 350 x 3.0/2.4 x 40 mm Godpfxjxabqze Ab Ejuh * Z = 108 FTZ negative for aluminium and plastic - Hydraulic feed brake, infinitely adjustable - Pneumatic material clamping from above, consisting of: * 2 vertical clamping cylinders, adjustable with hand lever valve - 1x machine stand - More powerful drive motor (3.0 kW)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.337 mm, premer struženja: 420 mm, Splošno Krmilnik: Siemens 828 D Premer struženja: 420 mm Dolžina struženja: 1.337 mm Premer nihanja: 700 mm Premer preboja palice: 89 mm Hitrost hitrega pomika: 20 / 10 / 24 m/min Glavno vreteno Premer preboja palice: 89 mm Velikost vpenjalne glave: 305 mm Število obratov: 2.500 obr/min Moč vretena: 22 kW Vretenski navor: 1050 Nm Nasprotno vreteno Število obratov: 4.000 obr/min Moč vretena: 12 kW Vretenski navor: 122 Nm Gusdpsx Ag Hmofx Ab Eeh Revolverska glava Tehnologija: 12 postaj Pogon orodja: 5.000 obr/min Moč: 9,4 kW Navor: 90 Nm Orodni nosilec: BMT-65 / BH Hod X: 280 mm Hod Y: 120 mm Hod Z: 1.390 mm Oprema Odstranjevanje ostružkov: Transporter ostružkov Dovod hladilne tekočine: 240 litrov Merjenje orodja: Merilna roka v delovnem prostoru Odvod delov: Lovilec delov Magazin za palice: Pripravljen

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, Oprema: CE označba, centralizirani mazalni sistem, dokumentacija / priročnik, hladilna enota, menjalnik šob, nujno zaustavitev, odsesavanje hlapov, odsesavanje prahu, varnostna svetlobna zapora, Serija: NS-HG Tip: Težka cevna obdelovalna naprava Funkcija posnemanja robov: Opcijsko Območje moči: Obdelava okroglih cevi: 50 mm ~ 560 mm Gjdpfx Ajww Upzsb Eeuh Obdelava kvadratnih cevi: 50 mm ~ 560 mm Maksimalna hitrost vpenjalne glave: 30 obr./min Teža stroja: 29 t Specifikacija napajanja: 380 VAC, 50 Hz Opcijsko nakladalno stojalo: Avtomatsko nakladalno stojalo s tremi vpenjalnimi glavami in verigo Opcijsko razkladalno stojalo: Avtomatsko razkladalno stojalo s tremi vpenjalnimi glavami in verigo Standard: Sistem 5000A, vključno z gnezdenjem, servo podporo (posnemanje robov), brezostankovno zadnje vpetje, votlo odstranjevanje prahu Opcije: Zaznavanje zvarov, varnostna ograja (svetlobna zavesa), steklo odporno na sevanje

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2026, Stroj za stiskanje vogalov WEGOMA Model EV175 ima samodejni sistem pozicioniranja glede na širino profila Gjdpfsyuziujx Ab Esuh • enostavno prilagodljiv in nastavljiv z lestvico • dvopreklopni nožni pedal za vpenjanje in stiskanje • laminirane najlonske podložke na mizi in podpornih rokah • drugi pozicijski ključ za posebne profile in orodja za stiskanje na zahtevo • potopno nakovalo, hidropnevmatsko • navpični vpenjalni cilindri • teža stiskalnih nožev je enostavno nastavljiva

Leto izdelave: 2006, stanje: novo, I am selling 12 sets of new saw blades suitable for HOLZMA panel dividing saws. Main saw blade FABA 600 x 5.8 / 4.0 x 60 Z 72 Guedpfx Abog Dvuto Eeh Scoring saw blade AKE 26 200 45H 200 x 4.8 - 5.8 x 45 Z=36 Total price: 1000 euros. Available immediately.