Dvojna Žaga Omga Tr2A Za Les, Aluminij nakup rabljenega (96.825)

Stanje: rabljeno, Technical details: Saw blade diameter: 420 mm Maximum cutting length: 5000 mm Cutting range (H x W): 180 x 100 mm Required air pressure: 6 bar Mitre cuts on both sides: 45° - 90° (manual) Operating voltage: 380 / 220 V Total power requirement: approx. 8.0 kW Machine weight: on request Machine dimensions (L x W x H): approx. 6.4 x 1.3 x 2.0 m Circular saw with 2x sawing supports for cutting profiles with mitre cuts up to 45°. Kjdpfju Nigwox Abysna Microprocessor positioning control BECKHOFF E 70-300 with absolute encoder Digital display Travel distance per sawing support = 2350 mm, motorized Clamping cylinder for each horizontal and vertical axis, manual Spray device Hydropneumatic feed Use of carbide tipped saw blades

Stanje: rabljeno, Leto izdelave: 1990, Premer reza 500 mm Dolžina reza 5000 mm Knodpfx Absv U Dlueysa Premer žaginega lista 420 - 500 mm Dimenzije cca. 6400 x 1500 x 1600 mm Teža cca. 1600 kg Brezstopenjsko podajanje Na voljo navodila za uporabo in seznam rezervnih delov Pnevmatsko podajanje, brezstopenjsko nastavljivo Vzdolžni pomik motoriziran z digitalnim prikazom

Stanje: rabljeno, Razstavni stroj, zaloga Roitham - tračna žaga za les Hans Schreiner HBS-HS 480-400V Tehnični podatki: Izhodna moč motorja: 2,75 kW S 6 (2,2 kW pri 100% ED), 400 V Kjdpfx Abox H Ufuoyona Širina žaginega traku: 6 do 25 mm Premer koles: 475 mm Širina reza: 465 mm Višina reza: 290 mm Velikost mize: 630 x 480 mm Naklonska miza: 45° Dolžina traku: 3607 mm Teža: 162 kg Simbolična fotografija! Pridržujemo si pravico do spremembe cen ter napak v tisku in besedilu.

Stanje: kot nova (razstavni stroj), Exhibition Machine - SBW 6300H Holzprofi Bandsaw for Wood Technical Data: Rated Motor Power: 5 HP, 400 Volt Wheel Diameter: 630 mm Cutting Width: 622 mm Cutting Height: 400 mm Table Size: 850 x 600 mm Blade Width: 8 – 38 mm Tilting Table up to: 45° Blade Length: 4600 mm Weight: 400 kg Ksdewzzipspfx Abyena Subject to price changes, errors, and typographical mistakes.

Leto izdelave: 2004, stanje: rabljeno, Najv. premer žaginega lista: 500 mm Območje reza do 80 x 200 mm Dolžina podajanja: maks. 800 mm z digitalnim prikazovalnikom Hitrost žaginega lista: 2 obr./min Števec kosov z avtomatskim izklopom ob doseženi nastavljeni vrednosti Ksdpfsxn Iq Dox Abysna Brezstopenjsko nastavljiv pnevmatski podajalnik materiala Hidropnevmatski podajalnik žage Pnevmatske vpenjalke materiala Naprava za pršenje Vključuje navodila za uporabo Dimenzije stroja: 2100 x 1100 x 1500 mm (ŠxDxV) 1000 kg

Leto izdelave: 2012, stanje: rabljeno, Maks. premer žaginega lista: 530 mm Kapaciteta reza pri 90° Okroglo 180 mm, Kvadrat 170 mm, Pravokotnik 380x70 mm Kapaciteta reza pri 45° levo Okroglo 180 mm, Kvadrat 150 mm, Pravokotnik 290x70 mm Ksdpfx Abjzabmqsysna Kapaciteta reza pri 45° desno Okroglo 180 mm, Kvadrat 150 mm, Pravokotnik 290x70 mm Digitalni prikaz kota za žagino mizo Obseg vrtenja žagine mize 180° Pršilna naprava Dvoročno upravljanje

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Aluminium profile mitre saw, manufacturer: Dry Tech Model: 355 MLS, year of manufacture: 2002. Saw blade diameter: 355 mm Cutting capacity: - Round material: max. 120 mm - Square material: max. 120 mm x 120 mm Ksdpstwn E Ujfx Abyena

Stanje: novo, Leto izdelave: 2025, premer žaginega lista: 400 mm, - Saw blade 400 mm - Double mitre - 4 pneumatic clamps - Mist lubrication system - Air blow gun - Protective cover - Documentation Kjdpfx Aou Si Ndsbysna - 400V

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Nagib rezila -45° / +45°. Največja odprtina primeža 180 mm. Največja dolžina brez podajalnika 385 mm. Premer diska 350 mm. Hitrost vrtenja rezila 1700 / 3400 vrt/min - 2 hitrosti. Knjdpfjx Hw Sqsx Abyea

Leto izdelave: 2018, stanje: rabljeno, Podtalna ročna krožna žaga za žagin list do D 250 mm Obseg nagiba za poševne reze -45°/90°/+30° Delovno območje (Okrugla) 90° 80 mm (Okrugla) 45° 80 mm (Kvadratna) 90° 70 mm (Kvadratna) 45° 65 mm Kedpfoy Nm N Rex Abysna 220 V

Leto izdelave: 2004, stanje: dober (rabljeno), Podtalna žaga ročna uporaba za žagin list do premera 300 mm Knedpfx Ajy Nm Hiebyea zajem pod kotom levo-desno do 45° ročna pršilna naprava za emulzijo robustno ohišje iz jekla in delovna miza iz sive litine 400V premična na podstavku

Stanje: dober (rabljeno), Leto izdelave: 2016, premer žaginega lista: 600 mm, vrsta vhodnega toka: trifazni, obratovalni tlak: 8 letvica, Industrijski aluminijasti žagalni stroj, ki samodejno reže z uporabo pnevmatskega dvo-gumbnega upravljanja, pri čemer je obdelovanec dvakrat pnevmatsko vpet. Vpenjanje je nastavljivo tako vodoravno kot navpično. Poleg tega je ta žagalni stroj opremljen z megličnim mazalnim sistemom, ki izboljša proces rezanja. Podajanje žaginega lista je na tej napravi nastavljivo. Lastnosti: - samodejno gibanje žage - dvojno pnevmatsko vpenjanje - žagin list se premika od spodaj navzgor - žagin list iz trdo kovine - nastavljiva hitrost žaganja - dolžinski naslon - mazalni in redukcijski sistem Kodpfx Ajzf U Tmjbyona - razpršilna instalacija - zračno pištolo - rezanje pod kotom - samodejno in ročno žaganje Stroj je nameščen in se dostavi montiran. Testiranje je možno.

Stanje: dober (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 600 mm, Obseg rezanja okroglega jekla pri 90°: 220 mm, For sale: 1 used CNC aluminum circular saw automatic including extraction unit Manufacturer: Tronzadoras MG Model: GAA-600 - CNC Year: 2015 Knodpfouyyhaex Abyea TECHNICAL DATA • Cutting range round: 220 mm, rectangle: 300 x 90 mm, square: 175 mm • Drive power: 4.1 kW / 400 V / 50 Hz • Speed: 3,000 rpm • Cutting speed: 55 m/sec • Blade dimensions: 600 x 50 mm • Max. cutting height: 220 mm • Dimensions: 2,020 x 1,510 x 975 mm • Weight: 650 kg The machine comes complete with a 6 m infeed roller conveyor and matching extraction unit. The saw can be inspected at our warehouse in 09599 Freiberg.

Stanje: novo, Leto izdelave: 2026, Product Innovation: Sawing Line Type "ORIX" The ORIX sawing line enables fully automatic processing of a wide variety of aluminium profiles. The machine features a sturdy base frame. For the positioning of the saw unit, linear guides and precision carriages are used. The drives are equipped with servo motors. During the cutting process, the saw unit moves forward 300 mm along the Y-axis, making it possible to cut special profiles, plates, as well as Item and Bosch profiles with ease. The support table consists of movable rollers that are automatically positioned according to the required cut length. All rollers are also mounted on precision linear carriages. Additionally, the saw features a robust discharge table where the cut aluminium parts are deposited. (Optionally, cut parts can also be transported directly away on a conveyor belt, including the removal of chips.) The machine is available with a cut length of 6,000 mm, bringing the total length to 7,000 mm. The saw line is delivered with a matching 2-channel minimum quantity spray system. The system can be fitted with either a 400 mm or 600 mm saw blade. Your benefits: • Hardly any scratches, as the material is not slid over a cast iron table Kjdpfxsfu Tgrs Abyena • Improved disposal of saw chips (no extraction necessary) • Extremely compact footprint: 4,000 mm / 7,000 mm • Smaller residual piece (50 mm residual length) • Safe operation (light curtain) • Easy material removal (conveyor belt or brush table) • No need for resetting as required with standard automatic saws • No loss of dimensions • Plug-in rollers accommodate any special profile form-fit for perfect cutting results Operating Process Enter the profile length into the control unit. The saw unit then moves to the specified length. The operator loads the aluminium profile and starts the machine. The saw locates the head cut position via a head cut recognition sensor. The head cut is executed. After cutting, the saw unit retracts and is repositioned to the next specified coordinate to repeat the cutting process. These operations repeat until the profile has been fully cut. All parts are gently deposited on the discharge table or conveyor belt. Material clamping is performed, as in conventional aluminium saws, by vertical and horizontal clamps directly at the saw unit. Once the profile is cut, the saw unit automatically moves back to the next loading position. The process can then be repeated. Optionally, cross feeders for automated profile feed can be used. For safety, fences or a light curtain can be integrated. The control system is available in two versions: 1) Diethei control, 2) Siemens control. Optional sorting of materials into various containers or by length is also possible. You are welcome to visit and inspect the machine at any time in our production/showroom facility. Please feel free to contact us! We look forward to your enquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, The fully automatic aluminium circular saw UK 350 A 90° CNC + drilling unit (cutting angle 90°) has been specifically developed for cutting profile and solid materials made of aluminium castings, copper, and hard plastics. An automatic material feed as well as automatic cutting motion make it ideal for fast and precise series production! Material feed is up to 700 mm per stroke. Multiple strokes for longer sections can be conveniently programmed from the control panel. The main vice clamps the material using two horizontal and two vertical clamping cylinders; the feed vice uses one horizontal and one vertical clamping cylinder. Cutting and feed speeds are adjustable according to the material being processed via the large, clearly laid out control panel. The machine features a mechanical stroke height adjustment, with a maximum cutting height of 100 mm. A large protective hood covers the entire working area and is pneumatically lifted at the push of a button. The standard configuration for the UK 350 A 90° CNC + drilling unit includes an air blow gun for cleaning the machine. Connections for chip extraction systems are provided. This machine is equipped with the TR 14 vertical drilling unit (drilling capacity up to ø 14 mm, thread M12), which is integrated into the cycle control of the aluminium circular saw. Equipment: • Machine for 90° cuts, with powerful drive motor • CNC control; input of quantity and section length conveniently via the large, user-friendly control panel • Storage for up to 20 cutting programs • Servo-driven feed; single stroke feed up to 700 mm (for longer sections, the feed is automatically repeated up to the desired length) • Main vice with 4 pneumatic clamping cylinders – 2 horizontal, 2 vertical • Feed vice with pneumatic horizontal and vertical clamping cylinders • Large protective hood, covers the entire working area, pneumatically lifted • Variable adjustment of cutting and feed speed • Maximum cutting height 100 mm • Air blow gun for machine cleaning • Connections for extraction system • Saw blade ø 350 mm • TR 14, fixed automatic drilling unit with tool holder • Spindle speed, drilling depth, etc. are set via the machine control; drilling cycle is automatic Technical Data: Drive power: 1.9 kW / 400 V / 50 Hz Speed: 3000 rpm Blade size: 350 x 32 mm Material feed per stroke: 700 mm Max. cutting height: 100 mm Kodpfx Aokqz H Dobyena Dimensions: 1400 x 850 x 970 mm Optional loading magazine available! We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, Aluminum Circular Saw UK 600 HA 90°, Semi-automatic The semi-automatic circular saw UK 600 HA 90° is an upcut machine, primarily used for cutting profile material made of cast aluminum, copper, and hard plastics (solid material only to a limited extent). The machine stands out for its simple operation and quick, convenient material changes. Please note that only 90° cuts are possible with this machine! The saw feed is automatic via push button. Material clamping is done by two pneumatically operated vertical and two horizontal clamping cylinders. The standard equipment includes a minimum quantity lubrication system and an air spray gun for cleaning the machine! Ports for a chip extraction system are provided. In addition, the machine can optionally be equipped with a digital mitre angle display, a marking laser, and a pneumatic system for lifting the safety hood. Equipment: - Large worktable, powerful drive motor - Two-button control for initiating the cutting process (optional single-button control available) - Clearly arranged control panel - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic saw blade lift with oil level indicator - Fixed material support jaw can be moved backwards to increase cutting capacity - Large safety hood fully covers the working area - Minimum quantity lubrication system with 2-liter reservoir - Adjustable blade/feed rate - Air gun for cleaning the machine - Saw blade diameter: 600 mm Operation Sequence: 1. Set the cutting angle 2. Insert the material 3. Adjust the lifting speed 4. Bring the clamping cylinders up to 20 mm near the material 5. Clamp the material 6. Press the start button; the machine is ready for operation Knodpepa Nxdjfx Abysa 7. Press and hold both SAW buttons; the material will be cut 8. At the end of the cycle, release both SAW buttons and press the STOP button 9. Open the clamp and remove or advance the material Technical data such as cutting range, output, etc. (see data sheet in email attachment). We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, Aluminum Circular Saw UK 650 HA, Semi-automatic Knsdpfx Aoidun Dobysa The semi-automatic circular saw UK 650 HA is an upcut machine primarily used for cutting profile materials made of aluminum castings, copper, and hard plastics (solid material only to a limited extent). The machine is distinguished by its user-friendly operation, quick and convenient material changeover, and easy miter angle adjustment. The UK 650 HA features a continuously adjustable miter range to the left and right up to 20° (pivoting range twice 70°). The saw feed operates automatically at the press of a button, while material clamping is achieved via two pneumatically controlled vertical and two horizontal clamping cylinders. Standard equipment includes a minimum quantity lubrication system and an air gun for cleaning the machine! This machine is also fitted with connections for a chip extraction system. Furthermore, optional accessories include a digital miter angle display, a marking laser, and a pneumatic device for lifting the safety hood. Equipment: - Double miter 20° – 90° – 20°, large support table - High-performance main drive motor - Two-button control for initiating the sawing cycle (optional one-button control available) - Clearly arranged control panel - Adjustable blade/feed rate - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic saw blade lifting with oil level indicator - Fixed material fence can be repositioned to the rear to increase cutting capacity - Large safety hood covering the entire work area - Minimum quantity lubrication system with 2-liter reservoir - Air gun for cleaning the machine - Saw blade ø 650 mm Operating Procedure: 1. Set the cutting angle 2. Insert the material 3. Adjust the lift speed 4. Bring the clamping cylinders to within 20 mm of the material 5. Clamp the material 6. By pressing the start button, the machine is ready for operation. 7. Press and hold both SAW buttons; the material will be cut. 8. Upon cycle completion, release both SAW buttons and press the STOP button 9. Open the clamping vise and remove or advance the material You are welcome to visit and view the desired system in our manufacturing/demo hall at any time. Please feel free to contact us regarding this matter. We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, Aluminium Circular Saw UK 352 P, manual The semi-automatic circular saw UK 352 P is an "upcut" machine and is primarily used for cutting profile materials made of aluminum castings, copper, and hard plastics (solid materials only to a limited extent). The machine is characterized by its ease of use, quick and convenient material change, and simple mitre angle adjustment. The UK 352 P features a continuously adjustable mitre range—up to 45° to the left and up to 0° to the right. The saw feed is automatic at the push of a button, while material clamping is performed by two pneumatically controlled vertical clamping cylinders. The standard scope of delivery includes a minimum quantity lubrication system and an air blow gun for cleaning the machine. The machine is equipped with connections for a chip extraction system. Features: - Manual guidance of the saw blade - Double mitre 30° – 90° – 0°, large support plate - High-performance drive motor - Clearly structured control panel - Two vertical pneumatic clamping cylinders - Fixed material stop, can be moved back to increase cutting capacity - Large protective cover, fully shields the working area - Minimum quantity lubrication system - Air blow gun for cleaning the machine - Saw blade Ø 350 mm Knedpfx Aboidunvjysa Work Process: 1) Set the cutting angle 2) Insert the material 3) Position the clamping cylinders up to 20 mm from the material 4) Pneumatically clamp the material 5) Press the start button to activate the saw blade 6) The cutting operation must be carried out manually using the hand lever 7) After completing the cut, switch off the machine! You are welcome to inspect the desired machine in our production/demo hall at any time. Please feel free to contact us regarding this. We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, The semi-automatic circular saw UK 352 HA is an “upcut” machine, predominantly used for cutting profile materials made from cast aluminum, copper, and hard plastics (limited suitability for solid material). The machine is characterized by its user-friendly operation, quick and convenient material changes, and easy miter adjustment. The UK 352 HA features a stepless miter range adjustable from left up to 45° and right up to 0°. Saw feed is automatic at the press of a button, while material clamping is provided by two pneumatically operated vertical clamping cylinders. Standard equipment includes a minimum-quantity lubrication system and an air spray gun for machine cleaning! Connections for a chip extraction system are provided as standard. Equipment • Precision under-table circular saw • Miter adjustment: left 45º / 90º / right -45º • Includes 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Chip extraction device • Mist lubrication system for air-oil cooling • Air gun with spiral hose • Includes maintenance unit with pressure reducer • Ergonomically arranged control panel • Max. cutting height: 125 mm • Saw blade: 350 mm • Saw blade not included in the scope of delivery! Kodpfxsgwt Rro Abysna You are welcome to inspect the desired machine in our production/demonstration hall at any time. Please do not hesitate to contact us. We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, Aluminum Circular Saw UK 352 M, manual The manual circular saw UK 352 M is an "upcut" machine, primarily used for single cuts on aluminum and copper profiles as well as hard plastics (solid materials only to a certain extent). The machine stands out thanks to its easy operation, quick and convenient material changeovers, and simple miter angle adjustment. The UK 352 M offers a continuously adjustable miter range of up to 45° to the left and up to 0° to the right. The saw feed is manual via a hand lever, and material clamping is also done manually. Equipment - Double miter 45° – 90° – 0° - Large support table - Powerful drive motor - Clearly arranged control panel - One manual clamping cylinder - Fixed material stop jaw can be shifted backwards to increase cutting capacity - Large protective hood covering the entire working area - Saw blade diameter: 350 mm Working process 1) Set the cutting angle 2) Insert the material 3) Manually clamp the material Kedpfx Abjidunnoysna 4) Press the start button to power up the saw blade 5) Perform the cut manually using the hand lever 6) After finishing the cut, switch off the machine! You are always welcome to view the desired machine in our production or demonstration hall. Please feel free to contact us. We look forward to hearing from you! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, The semi-automatic circular saw UK-400-A is an “upcut” machine, primarily used for cutting profiles made of cast aluminum, copper, and hard plastics (solid material to a limited extent). The machine is characterized by its intuitive operation, quick and convenient material changes, and easy mitre angle adjustment. The UK-400 A features a continuously adjustable mitre range to the left and right up to 20° (swivel range two times 70°). The saw feed is automatic and activated by pressing a button, while the material is secured by two pneumatically operated vertical and horizontal clamping cylinders each. The standard configuration for this machine includes a minimum quantity lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are provided. Additionally, this machine can optionally be equipped with a digital mitre angle display, a marking laser, and a pneumatic device for lifting the protective hood! Equipment • Precision under-table circular saw • Continuously adjustable mitre angles: 0º/45º/90º/-45º/-60º • including 2 pneumatic clamps (vertical) • Infinitely variable saw blade feed • Two-hand safety operation • Adjustable rear material stop • Chip extraction device for chip extraction system • Mist spraying unit for air-oil cooling • Air gun with spiral hose • Including maintenance unit with pressure regulator Kodpfx Aegwt Rnjbyjna • Ergonomically arranged control panel • Max. cutting height: 130 mm • Saw blade: 400 mm • Saw blade not included! You are welcome to inspect the desired unit at any time in our production/showroom facility. Please feel free to contact us. We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, The semi-automatic circular saw UK 352 HA is an “upcut” machine, predominantly used for separating profile materials made of cast aluminum, copper, and hard plastics (to a limited extent, solid materials). The machine is distinguished by its user-friendly operation, rapid and convenient material change capability, and easy mitre angle adjustment. The UK 352 HA offers a continuously adjustable mitre range of up to 45° to the left and 0° to the right. The saw feed is automatically driven at the push of a button, and material clamping is performed by two pneumatically operated vertical clamping cylinders. As standard, this machine comes equipped with a minimum quantity lubrication system and an air spray gun for cleaning the machine. The machine is prepared for connection to a chip extraction system. Features • Precision under-table circular saw • Mitre adjustment: left 45°, 90°, right -45° • Includes 2 pneumatic vertical clamps • Infinitely adjustable saw blade feed • Two-hand safety control system • Adjustable rear material stop Knodpsgwt Ryofx Abyea • Extraction system for chip extraction unit • Mist spray system for air-oil cooling • Air gun with spiral hose • Maintenance unit with pressure regulator included • Ergonomically arranged control panel • Max. cutting height 125 mm • Saw blade Ø 350 mm • Saw blade not included! We look forward to hearing from you! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, pritisk: 6 letvica, The semi-automatic circular saw UK-600-A is an “upcut” machine, primarily used for cutting profile materials made of aluminum casting, copper, and hard plastics (to a limited extent, also solid material). This machine is characterized by its ease of operation, quick and convenient material change, and straightforward miter angle adjustment. The UK-600 A features a continuously adjustable miter range of up to 20° to the left and right (swivel range of two times 70°). Saw feed is automatic at the push of a button, while material clamping is performed by two pneumatically controlled vertical and horizontal clamping cylinders each. As standard, this machine comes equipped with a minimum quantity lubrication system and an air blow gun for machine cleaning. Connections for a chip extraction system are also provided. Additionally, this machine can optionally be equipped with a digital miter angle display, a line laser, and pneumatic hood lifting. Features: • Precision underfloor circular saw • Stepless miter adjustment 0º/ 45º/ 90º/ -45º / -60º • Includes 2 pneumatic clamps (vertical) • Continuously adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Extraction system—chip extraction connection • Mist spray device for air-oil cooling • Air gun with coiled hose • Includes maintenance unit with pressure regulator • Ergonomically arranged control panel • Maximum cutting height 230 mm • Saw blade 600 mm • Saw blade not included! Ksdsgcbwgjpfx Abyjna You are welcome to view the desired unit at any time in our production/showroom. Please contact us for an appointment. We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, The semi-automatic circular saw UK 500 HA is an “upcut” machine, predominantly used for cutting profile materials made of aluminum cast, copper, and hard plastics (suitable for solid material to a certain extent). The machine stands out for its ease of use, fast and convenient material change, and simple mitre angle adjustment. The UK 500 HA offers a continuously adjustable mitre range from 30° to the left up to 0° to the right. The saw feed is automatically operated by pressing a button, while material clamping is achieved with two pneumatically controlled vertical and horizontal clamping cylinders each. The standard configuration of this machine includes a minimal lubrication system and an air blow gun for cleaning the machine! Connections for a chip extraction system are provided on this machine. Kjdpfx Asgwt R Dsbyjna Features • Precision underfloor circular saw • Continuously adjustable mitre adjustment at 0º/ 45º/ 90º/ -45º / -60º • Includes 2 pneumatic clamps (vertical) • Saw blade feed continuously adjustable • Two-hand safety control • Adjustable rear material stop • Chip extraction device for suction unit • Air-oil mist lubrication unit • Air gun with spiral hose • Includes maintenance unit with pressure regulator • Ergonomically arranged control panel • Max. cutting height 180 mm • Saw blade 500 mm • Saw blade not included in delivery! You are welcome to inspect the desired machine at any time in our manufacturing/demonstration hall. Please feel free to contact us. We look forward to hearing from you! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, Aluminum Circular Saw BC 450 HA, Semi-automatic (MG FRONT-450) The BC 450 HA is a double miter saw with a swiveling range of 45° to the left and 22.5° to the right and automatic miter adjustment via stop functions. The saw feed operates automatically, and the material is clamped pneumatically. The saw blade (450 x 30 mm) operates horizontally. Additionally, this machine can optionally be equipped with a digital miter angle display, a marking laser, and a pneumatic safety guard lifting system! Features - Double miter saw with a powerful drive motor - Two-button control for triggering the sawing cycle (optionally also available as a single-button control) - Large miter range from -22.5° to +45°, swivel range 67.5° – 0° – 45° - Automatic miter adjustment, fixed stop functions at -45° / 90° / +45°, plus two variable stop functions adjustable to the desired angle! - Two horizontal pneumatic clamping cylinders - Clear and accessible control panel - Large safety guard covering the entire working area, lifted pneumatically - Adjustable blade feed rate - Connections for extraction system - Minimum quantity lubrication system - Air gun for machine cleaning - Saw blade diameter 450 mm Operating Process 1. Set the cutting angle 2. Insert the material 3. Adjust the feed rate 4. Move the clamping cylinders to within 20 mm of the material 5. Clamp the material 6. The machine is ready for operation by pressing the start button 7. Press and hold both SAW buttons to cut the material 8. Upon completion of the cycle, release both SAW buttons and press the STOP button 9. Open the clamping device and remove or advance the material Plantec Maschinen GmbH Kjdpfspa Nxajx Abysna