Mecalux / Länge: 1.057 Mm / C40X25X8Mm / Maß Mitte-Mitte-Bohrloch 997 Mm / Blau nakup rabljenega (83.953)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking, used: Hot-dip galvanized bolt-together system Scope of delivery: - 4 double-sided racking uprights, height 3,500 mm, each with 1,200 mm base parts - 24 cantilever arms, depth 1,200 mm, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. mounting hardware (floor anchors not included) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available anytime) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components with hot-dip galvanized finish - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright has 6 bolted cantilever arms and 2 base sections, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (floor anchors not included) - Supplied with assembly instructions and C4 rated load signs according to DIN standard - Expert telephone support - Made in Germany Hsdemkixwspfx Aqtst - Short delivery times - On-site collection available Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notice before delivery. The material is packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, flat, and suitable for anchoring as well as capable of supporting the applied loads. It is the customer's responsibility to check and ensure the suitability and load-bearing capacity of the substrate and obtain any necessary permits. Racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to German safety guidelines, it is recommended that the uprights have a minimum overhang of 500 mm above the highest storage level.

Stanje: dober (rabljeno), Technical data for pallet rack uprights: Racking system: Mecalux Included in delivery: 01x Pallet rack upright, used Material color: blue Frame type: M-81 Frame profile: 80 x 70 x 2.00 mm Including horizontal and diagonal braces, Base plates The uprights are pre-assembled (bolted truss construction) 8,000 mm high 1,100 mm deep Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Hjdpfjmmcd Nsx Aqtst General information about the item: This item is offered for collection only. If transport or shipping of this item is required, additional costs will apply, which can be requested from us separately depending on place of delivery and scope of delivery.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever racking system, powder-coated (RAL 7016 Anthracite): Scope of delivery: - 4 uprights, height 4,200 mm with base part, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm - Longitudinal and diagonal bracing for 1,300 mm upright spacing (system length 4,000 mm) - Fastening materials (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered; extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface coated in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm Hsdpfx Asmidyfjqtjt - Load capacity per upright: 2,200 kg - Base section and cantilever arms with usable depth of 1,200 mm - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms as standard (= 4 storage levels) - Load capacity per arm: 730 kg - Includes longitudinal and diagonal braces for 1,300 mm upright spacing - System length: 4,000 mm - Fastening materials included (floor anchors not included) - Supplied with assembly instructions and C4 load plates according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance delivery notice. The material is sensibly packed for easy unloading. Delivery is possible approximately 1–2 weeks after order receipt. Please note: For outdoor installation, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, and suitable for anchoring, and must be able to take the imposed loads. Customers are responsible for verifying soil condition, load-bearing capacity, and obtaining any necessary official permits. Uprights must be anchored to the floor by the customer; wall mounting is neither necessary nor recommended. According to trade association guidelines, uprights should project at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Screw system in hot-dip galvanized design: Pickup price: Robust steel construction made of IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Hedjmhhl Hopfx Aqtot Base section: 1,200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Each upright equipped with 3 bolted cantilever arms, usable depth 1,200 mm, standard (equals 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Mounting hardware included (ground anchors not included) Supplied with assembly instructions and C4 load capacity labels according to DIN standards

Leto izdelave: 2016, stanje: rabljeno, Maks. dolžina podajanja: 3000 mm Voz je mogoče preklopiti navzgor Hjdpfx Aeza Akweqtst Ročno premikanje Namestitev na desni strani 2 po višini nastavljive noge Plastična kolesa

Stanje: dober (rabljeno), Clamping plate, marking/scribing plate, spotting table, measuring plate, measuring table, welding table, straightening plate - Plate: planed - Width: 793 mm - Length: 997 mm - Height: 930 mm - Plate thickness: 60 mm - Plate: solid Hjdoctmv Sjpfx Aqtjt - Weight: 418 kg

Stanje: dober (rabljeno), roller conveyor, conveyor track, roller conveyor belt, rollway, saw roller stand, saw roller block, saw horse, saw roller conveyor, length stop, longitudinal stop, saw stop, material stop, motorized length stop, controlled length stop, roller conveyor, conveyor track, roller conveyor belt, rollway Hjdpfed D R Syex Aqtst -Length stop for: saws -with: manual longitudinal stop adjustment -with: hydraulic motor-driven lateral stop adjustment -indication via: SIKO mechanical position indicator -roller conveyor: Ø 80 x 1340 mm -maximum stop length: 2950 mm -roller spacing: 300 mm -dimensions: 3000/1640/H940 mm -weight: 534 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. Hedpfx Aqemhh Dhstst If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening materials (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts available for reorder and extensions can be supplied at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) Hodemhhx Iepfx Aqtst - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fixing materials (without floor anchors) - With assembly instructions and C4 load labels as per DIN standard - Professional telephone advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with pre-delivery notification. Material is packaged for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowels, and able to accommodate the applied loads. Floor quality, load-bearing capacity, and any required official permits are to be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to the German employers’ liability insurance association, it is recommended that the rack uprights have a minimum 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Hsdpfx Ajmhh Aneqtjt Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: dober (rabljeno), Technical data for the pallet racking system: Racking system: Mecalux Technical details for installation: Number of rack rows: 1 unit Length per rack row: approx. 30,700 mm Number of bays per rack row: 9 units at 3,300 mm each Number of levels plus ground level: 2 units Included in the scope of supply: Hjdetukqijpfx Aqtet 10x pallet rack uprights, used Upright color: blue Upright type: A 103 Upright profile dimensions: P 100 x 79 x 3 mm Including horizontal and diagonal braces, Base plates Uprights are pre-assembled (bolted construction) 2,000 mm high 1,100 mm deep 36x pallet rack beams, used Beam color: orange Box profile: 120 x 50 mm Beam type: TB-S 120 Clear span: 3,300 mm 72x integrated safety pins, used Pin color: orange For securing the beams against unintentional lifting 40x expansion anchors, new Manufacturer: Hilti Model: HST2 M12x105/10 Material: galvanised carbon steel Approved for: cracked concrete 20x levelling shims, used Finish: fully galvanised For levelling rack uprights on uneven floors 1x load capacity sign with field and compartment load data, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for pickup. Shipment or transport of this item is possible at additional cost, which can be requested separately depending on place of delivery and scope of supply.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Hodpfx Aqemhhypstot Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) Hjdsmhhf Sspfx Aqtet - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Materials are sensibly packaged to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack used: bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable, extensions possible anytime) - (*Offer also available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Hjdpfx Aemhh Dteqtot Goods are packed for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, level, suitable for anchors, and able to withstand the applied loads. The customer is responsible for checking and ensuring the floor condition, load-bearing capacity, and any required official approvals. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational health and safety regulations, it is recommended that racks have at least a 500 mm overhang above the top storage level relative to the top edge of the upright.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standards - Technical telephone support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. When installing outdoors, loading capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level. Hedjmhh Dzopfx Aqtst

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard type - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms as standard (=4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable transport with prior notice before delivery. The material is efficiently packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The foundation must be made of concrete, level, suitable for dowelling, and able to bear the applied loads. The suitability and load-bearing capacity of the floor, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to a wall is neither necessary nor recommended. Hodpfx Aqsmhhyastot According to the employers’ liability insurance association, it is recommended that the upright has at least a 500 mm projection above the top storage level.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: F2117E03879, Leto izdelave: 2014, obratovalne ure: 1.165 h, nosilnost: 1.000 kg, dvižna višina: 1.550 mm, vrsta goriva: električni, tip droga: simpleks, gradbena višina: 1.940 mm, dolžina vilic: 1.350 mm, lastna masa: 745 kg, vrsta pogona: Elektro, High-lift pallet truck Chassis number: F2117E03879 Mast type: Standard Technical condition: very good Front tire type: Polyurethane Rear tire type: Polyurethane Battery voltage: 24V Battery capacity: 200Ah Hjdpouhw U Dsfx Aqtjt Battery year: 2014 Description: Linde L 10 No.: K0119 Year of manufacture: 2014 Operating hours: 1,165 The machine is in very good optical and technical condition. Subject to prior sale and errors. If you haven’t found the forklift you are looking for, please contact us. We have a large selection of additional machines available on site. - Valid safety inspection (UVV) - Integrated charger

Stanje: dober (rabljeno), Included in the scope of delivery: 01x shelf connector, used Manufacturer: Mecalux Material color: Sendzimir galvanized Total length: approx. 430 mm For rack spacing: approx. 300 mm Weight: 0.560 kg | piece Currently in stock: approx. 786 pieces Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Hjdjva Hrhopfx Aqtjt General information about the item: This item is offered for collection only. If transport or shipping of this item is required, additional costs will apply, which can be clarified with us individually depending on delivery location and quantity.

Stanje: dober (rabljeno), Transportni trak, pasovni transporter, transportni trak, pasovni transporter, ploski pasovni transporter, transportni trak z vakuumskim priključkom Hsdpfx Aqsxu Ehyotst - Pasovni transporter: vakuumsko področje za sesanje materiala, ki se transportira - Transportni pasovi: 3 kosi, dolžina 1840 x 30 mm - Pogonska os: Ø 30 x 100 mm - Posamezne komponente: glej slike - Dimenzije: 1840/570/H285 mm - Teža: 129 kg

Stanje: dober (rabljeno), Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamp sleeve, sliding gate sleeve - Manufacturer: Helm, curved running rail (helmet rail) with clamp - Type: Width 105 mm - Length: 1600 mm - Dimensions: see photos - Quantity: 1x helmet rail available Hjdpfx Aqowmq H Ietst - Transport dimensions: 1600/473/H134 mm - Weight: 38 kg

Stanje: dober (rabljeno), Technical data for pallet rack beam: Rack system: Mecalux Hsdpfxjvgtzcs Aqtot Included in delivery: 01x Pallet rack beam, used Beam type: 2C-S 1315 Material color: orange Box profile: 130 x 50 mm Connector: 4 HK (hooks) Clear span: 3,595 mm Max. load per beam pair: 2,650 kg with evenly distributed load 02x Integrated safety pin, used For securing the longitudinal beams against unintentional lifting Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra charges, which can be quoted separately depending on the place of delivery and scope of order.

Stanje: dober (rabljeno), Lopata za viličarja, hidravlična lopata za viličarja, lopata za lahek material, preklopna lopata, naprava za preklop zabojnikov, vilice za viličarja, vilice, vilinski zobje Hjdpfxotvb D Uo Aqtjt - Vilice za viličarja: 2 kosa/1 par - Dolžina: 900 mm - Pozor: stanje preverite na fotografijah - Prečni prerez: 100 x 40 mm - Priklop: 400 mm (glejte skico na fotografijah) - Transportne dimenzije: 1020/565/V100 mm - Teža: 98 kg

Stanje: pripravljen za uporabo (rabljen), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank We are offering a used CS Sigma profile for sale here. The listed price refers to the price per piece. Scope of delivery includes: 01x CS Sigma profile, used Material colour: cream white Profile length: approx. 2,200 mm CS profile dimensions: approx. 150 x 50 x 15 mm Material thickness: approx. 2.25 mm Weight per piece: approx. 10.5 kg The CS Sigma profiles may be bent or show minor damage or signs of surface rust. Hedpfogfbyzox Aqtjt Overview of our services: (Prices upon request) Assembly and installation Please observe our general assembly conditions. Racking inspection Racking inspection according to DIN EN 15635, performed in accordance with BGR 234 visual inspection requirements for all racking systems. Delivery with our own fleet (unloading not included)

Stanje: pripravljen za uporabo (rabljen), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank We are offering a used CS Sigma profile for sale here. Hodpfx Ajgfbytjqtst The stated price refers to the price per piece. The scope of delivery includes: 01x CS Sigma profile, used Material color: cream white Profile length: approx. 2,000 mm CS profile dimensions: approx. 150 x 50 x 15 mm Material thickness: approx. 2.25 mm Weight per unit: approx. 10.0 kg The CS Sigma profiles may be bent and/or show minor damage or traces of rust. Our services at a glance: (Prices on request) Assembly and installation Please observe our general assembly conditions Racking inspection Racking inspection in accordance with DIN EN 15635, carried out according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (unloading not included)

Stanje: novo, Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Hodpfx Aqsh Dv Uqotst Mr. Falk Deutsch Mr. Simon Blank Technical data for the pallet rack beam: Racking system: Mecalux Scope of delivery includes: 01x Pallet rack beam, new Colour: RAL 2001 orange Suitable for frames: A103 Beam type: 2C-S 1115 Box section: 110 x 50 mm Connector: G.E. - 3 Clear span: 2,700 mm Weight per piece: approx. 15.026 kg Max. load per pair of beams: 3,000 kg with evenly distributed load 02x Integrated locking pins, new For securing the cross beams against accidental lifting General information about the item: This item is only offered for collection. Delivery or shipping can be arranged at additional cost, which can be quoted separately depending on delivery location and scope. Our services at a glance: (Prices on request) Assembly, installation Our general installation terms and conditions apply Racking inspection Rack inspection according to DIN EN 15635 carried out in compliance with BGR 234 visual inspection requirements for all racking systems Delivery with our own fleet (unloading not included)