Ifor Williams Viehanhänger Ta510 14X7 178X434Cm Höhe:213 3,5T|Doppelstock nakup rabljenega (1.729)

Stanje: novo, Including parabolic suspension / spare wheel / full-width ramp / lockable coupling head / spiral cable Technical Specifications: • Manufacturer: Ifor Williams • Model: GX105 • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle • First registration: Without first registration • TÜV/HU: 2 years from first registration Lhsdpfxsx Srtgo Ac Uek • Internal dimensions (LxWxH): 303 x 157 x 30 cm • External dimensions (LxWxH): 511 x 209 x 167 cm • Loading height (deck): 43 cm • Gross vehicle weight: 2,700 kg • Unladen weight: 700 kg • Payload: 2,000 kg • Chassis: Low-loader (wheels positioned next to the body) • Tyres: 165R13C • Suspension: KNOTT parabolic suspension • Support wheel: Yes • 100 km/h approval: No DESCRIPTION • Reinforced side panels with tread-plate aluminium, walkable • 24mm anti-slip, waterproof phenolic plywood floor • Extremely robust welded mesh tube frame • Frame fully hot-dip galvanized by immersion • Continuous steel mesh ramp (120 cm) with support • Adjustable spindle ramp locks – extremely sturdy and rattle-free • Lift assist for the loading ramp • Very low chassis ensures a small approach angle • Excavator bucket rest at the front • Spare wheel mounted under excavator bucket tray • 6 tie-down rings mounted on the side walls • KNOTT leaf spring axles for heavy-duty use • Reverse-automated braking system • KNOTT overrun device and parking brake • Lockable coupling head • Reinforced, bolted V-drawbar, highly stable • 13-pin plug • Detachable wiring harness from front wall • Reversing lights • Large, heavy-duty safety lighting • Integrated rear fog light • Recessed lighting in the rear frame • Heavy-duty centre-mounted jockey wheel Optional accessories available – please inquire: This trailer can be optionally equipped with a range of accessories as shown in the pictures, e.g.: - 4x foldable lashing rings (base plate anchors) mounted in the floor New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery possible - All prices incl. VAT - Vehicle registration document can be sent in advance, or transfer plates (Germany) can be provided. - Export license plate including customs clearance available Attention: Descriptions and images are subject to copyright! Trailer Center BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available from stock! We have been specialized dealers and service partners for over 30 years for brands including Brian James, Blyss, Debon, Humbaur, Hapert, Unsinn, Cheval Liberte, Ifor Williams, Koch, Lorries, Martz, Stedele, TPV, Tohaco, Vezeko, Variant, Vlemmix, and many more. Errors, omissions, and prior sale excepted.

Stanje: rabljeno, največja dovoljena obremenitev: 2.735 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, prva registracija: 02/2026, dolžina tovornega prostora: 4.260 mm, širina tovornega prostora: 2.040 mm, skupna širina: 2.100 mm, skupna višina: 990 mm, Visokonakladni prikolica z izmenljivo ročno vitlo, z inercijsko zavoro, z lesenim dnom, vgrajene zadnje podporne noge (dodatna oprema), 2 nalivne rampe za registrsko tablico ... in še veliko več. Ledpfx Acsy S Nkps Ujhk Pridržujemo si pravico do napak in predčasne prodaje.

Stanje: dober (rabljeno), Nosilno konzolno regal, OHRA, 3 m, višina Na zalogi več kot 100 m, glejte slike. Višina 3 m Izstop konzole 100 cm Nosilnost/izstop konzole 800 kg 4,5 tekočih metrov, 4 nosilci z izstopom konzole Cena za pogajanja: 2.360,00 € /neto Ponudba vključuje: 4 nosilci z nogami, višina 3 m 4 nastavljive konzole, 100 cm na nosilec, nosilnost 800 kg/konzola. Diagonalne vezi, opornice in distančniki so vključeni. Razmik med okvirji 150 cm Nosilnost na nosilec na eni strani 3.200 kg Na voljo v višinah 2,5 m, 4 m ali 6 m. Druge konfiguracije na zahtevo. Stalno na zalogi več kot 3000 tekočih metrov regalov za palete različnih proizvajalcev. Transport in montaža na zahtevo možni. (Pridržujemo si pravico do sprememb in napak v tehničnih podatkih, specifikacijah in cenah ter do prodaje predhodno. Glejte naše splošne pogoje, vse cene so brez DDV, odvisno od zaloge.) Lenox Trading – vrhunska oprema za skladiščenje in rabljenih/novih regalov za težke obremenitve Opis: Iščete visokokakovostne regalne sisteme za skladiščenje? Lenox Trading je z okoli 100 zaposlenimi eden največjih trgovcev z novo in rabljeno opremo za skladiščenje v celotni regiji DACH (Avstrija, Nemčija, Švica). Lhodpfocd Dwyex Ac Ujk ⚡ HITRA DOBAVA: • Več kot 10.000 tekočih metrov regalov, ki so na voljo takoj. • 20.000 m² skladiščnih podestov in jeklenih podestov, ki so na voljo takoj. • 30–50 polnih tovornjakov prevoženih tedensko, kar zagotavlja največjo izbiro. 📦 NAŠA PONUDBA (UGODNO NAKUPOVANJE NA SPLETU): Ne glede na to, ali kupujete regal za palete, regal za težke obremenitve, visoke regale, regale s policami ali regale za IBC-posode – dobavljamo in montiramo po vsej Evropi s svojo lastno ekipo! Vključno z načrtovanjem v CAD-u, transportom, demontažo in montažo. 🏭 VRHUNSKE BLAGOVNE ZNAMKE, RABLJENE IN IZ LIKVIDACIJSKIH POSTOPKOV/KONKURZOV: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (tip MPB, tip E, regal za težke obremenitve Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Nosilno konzolna regala (Elvedi Kragarmregale, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 NAŠ DRUGI STEBER POSLOVANJA: SPLETNE AUKCIJE IN LIKVIDACIJA Pri demontaži in čiščenju ponujamo celovit paket storitev: 1. Pausalno odkupovanje: odkup komercialne robe, opreme in celotnih zalog, vključno s popolnim čiščenjem. 2. Aukcija na podlagi provizije: izvajanje dražb v našem imenu. Naše celovite storitve, ki jih izvajajo naši zaposleni: katalogizacija, priprava pisarne, pregled, izročitev blaga, logistika, razstavljanje in popolno čiščenje. Ne glede na to, ali ste na nas naleteli zaradi regalov za težke obremenitve ali iščete pocinkane regale za težke obremenitve / regalski sistem za težke obremenitve – zagotavljamo najboljše pogoje. Stopite v stik z nami za neobvezno ponudbo!

Stanje: rabljeno, Used pallet racks from SSI Schäfer are among the most popular solutions for efficient and safe warehouse storage. This heavy-duty racking system is ideal for warehouses, industrial and logistics companies looking for robust and long-lasting racks for Euro pallets. The proven PR600 construction offers high load capacities, flexible configurations, and reliable performance for daily operations. Buying used means: certified brand quality at an attractive price – immediately available from stock for new installations, conversions, or system expansions. Customizable: The upright frames (types P100 / P120) can be converted to your desired height – precisely and professionally carried out in our workshop. We deliver tailored racking solutions to suit any storage requirement. PRODUCT DETAILS - Height: approx. 750 cm - Depth: approx. 105 cm - Length: approx. 3090 cm - Shelf load: 3000 / 3500 kg (depending on version) - Bay width: 270 cm (3 × EPAL) - Beams: 270 cm, type INP100 or CE110 (box profile) - Beam color: blue - Upright type: P100 / P120, galvanized, pre-assembled - Levels: floor + 4 - Pallet spaces: 165 incl. ground level - Model: Used SSI Schäfer PR600 - Availability: immediately from stock, multiple units in stock SCOPE OF DELIVERY: - 12 × upright frames approx. 7.50 × 1.05 m, galvanized, pre-assembled - 88 × beams approx. 270 cm (INP100 or CE110) - 176 × safety pins Lhedpfx Acjzuxh Tj Usk Price: €3,744.00 net €4,455.36 gross You will receive an invoice including VAT. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery throughout Germany via our partner freight forwarder – shipping costs depend on postal code - Professional assembly and disassembly by trained teams available as an option - Racking inspections according to DIN EN 15635, carried out by certified inspectors - Also possible: inspection of existing heavy-duty racks from other manufacturers PLANNING & CONSULTATION: Our planning department is happy to provide a non-binding offer – tailored to your individual requirements. Whether for new construction, modification, or expansion – we provide expert advice on your racking configuration. SHOWROOM: Visit us in our showroom! On site, you can get a comprehensive impression of our pallet racks, warehouse shelving, and additional solutions. Many systems are assembled and available for direct demonstration. Our specialists are on hand to answer your questions and provide individual consultation – we look forward to your visit! Haven’t found the right solution yet? Visit our website for a quick overview of many offers and article variations! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone call. Our phone number can be found on our company page. ☎️ We are available by phone Monday to Friday, 8:00 – 16:00. Alternatively, send us a message with your name and number and we will get back to you as soon as possible.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Used pallet racking from SSI Schäfer is among the most popular solutions for efficient and safe warehouse storage. This heavy-duty racking system is ideal for warehouses, industrial operations, and logistics companies requiring robust and durable racking for storing Euro pallets. The proven PR600 construction offers high load capacity, maximum flexibility, and is perfectly suited for storing goods with substantial weights. Buying used here means: certified brand quality at a particularly attractive price—immediately available for new builds, modifications, or expansions of your existing racking systems. Customizable: The rack frames (type P120) can be adapted to your desired height—precisely and professionally in our workshop. We provide made-to-measure racking solutions for every storage requirement. PRODUCT DETAILS - Height: approx. 9.85 m - Depth: approx. 105 cm - Length: approx. 10,100 cm - Shelf load: 3,000 / 3,500 kg (depending on version) - Bay width: 270 cm (fits 3 × EPAL) - Beams: 270 cm, type INP100 or CE110 (box profile) - Beam colour: Blue - Frame type: P120, galvanized, pre-assembled - Levels: Floor + 4 - Pallet locations: 540 including floor spots - Version: Used SSI Schäfer PR600 - Availability: in stock for immediate delivery, multiple units available SCOPE OF DELIVERY: - 037 × frames approx. 9.85 × 1.05 m, galvanized, pre-assembled - 288 × beams approx. 270 cm (INP100 or CE110) - 576 × safety pins Price : €11,844.00 net €14,094.36 gross An invoice with VAT shown separately will be provided. Lhedozuxhaopfx Ac Uok DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery in Germany by our partner forwarding agents – freight cost depends on postal code - Professional assembly and disassembly by trained teams available as an option - Rack inspections in accordance with DIN EN 15635 by certified inspectors - Inspections for existing heavy-duty racks from other manufacturers possible PLANNING & CONSULTING: Our planning department will be happy to prepare a non-binding offer tailored to your requirements. Whether new installation, retrofit, or expansion—we provide expert advice on your racking configuration. SHOWROOM: We welcome your visit to our showroom! See a comprehensive selection of our pallet racking, storage shelving, and other solutions on site. Many systems are installed and can be experienced first-hand. Our experts are on hand to answer your questions and provide individual advice—we look forward to your visit! Not found the right solution yet? Visit our website for a quick overview of many offers and variations for these products! INTERESTED OR HAVE QUESTIONS? Contact us by message or phone. Our phone number is listed on our company page. ☎️ We are available by phone Monday to Friday, 08:00 – 16:00. Alternatively, send us a message with your name and number and we will get back to you as soon as possible.

Stanje: rabljeno, Used pallet racking systems from SSI Schäfer rank among the most popular solutions for efficient and secure storage. This heavy-duty rack system is ideal for warehouses, industrial settings, and logistics companies that require robust and durable shelving for storing Euro pallets. The proven PR600 design offers high load capacity, maximum flexibility, and is perfectly suited for storing goods with substantial weight. Purchasing used means: certified brand quality at a particularly attractive price – immediately available for new builds, conversions, or expansions of your existing racking system. Customizable: The frame uprights (Type P120) can be modified to your desired height – precisely and professionally carried out in our workshop. We deliver bespoke racking solutions to meet every storage requirement. PRODUCT DETAILS - Height: approx. 490 cm - Depth: approx. 105 cm - Length: approx. 1410 cm - Shelf load capacity: 3,000 / 3,500 kg (depending on configuration) - Bay width: 270 cm (fits 3 × EPAL pallets) - Beams: 270 cm, Type INP100 or CE110 (box section) - Beam colour: Blue - Frame type: P120, galvanized, pre-assembled - Levels: Floor + 2 - Pallet positions: 45 including floor positions - Version: Used SSI Schäfer PR600 - Availability: Immediately available from stock, multiple sets in stock SCOPE OF DELIVERY: - 06 × Frames approx. 4.90 × 1.05 m, galvanized, pre-assembled - 20 × Beams approx. 270 cm (INP100 or CE110) - 40 × Safety pins Price: €1,080.00 net €1,285.20 gross Lodpfx Acszuwn Ee Uehk You will receive an invoice with VAT shown separately. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery within Germany via our partner freight forwarders – shipping cost depends on postal code - Professional assembly and disassembly by trained teams available on request - Rack inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking from other manufacturers also possible PLANNING & CONSULTING: Our planning department will gladly prepare a non-binding offer – tailored precisely to your requirements. Whether for new installations, conversions, or extensions – we provide expert advice for your racking configuration. SHOWROOM: Feel free to visit our showroom! Get a comprehensive impression of our pallet racks, storage racks, and other solutions on site. Many systems are assembled and available for direct inspection. Our experts are available to answer your questions and provide tailored advice – we look forward to your visit! Haven’t found the right system yet? Visit our website for a quick overview of many offers & variations of this item! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone call. You can find our phone number on our company page. ☎️ We are available by phone Monday to Friday, 08:00 - 16:00. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.

Stanje: rabljeno, Used pallet racking from SSI Schäfer ranks among the most popular solutions for efficient and safe warehousing. This heavy-duty racking system is ideal for warehouses, industrial operations, and logistics companies that require robust and durable racking for storing Euro pallets. The proven PR600 construction ensures high load capacity, maximum flexibility, and is perfectly suited for storing goods with substantial weight. Buying used here means: certified brand quality at a particularly attractive price—immediately available for new builds, conversions, or expanding your existing racking system. Customisable: The racking frames (Type P120) can be rebuilt to your desired height—precisely and professionally in our workshop. We deliver tailored racking solutions for every storage requirement. PRODUCT DETAILS - Height: approx. 490 cm - Depth: approx. 105 cm - Length: approx. 3090 cm - Shelf load: 3000 / 3500 kg (depending on configuration) - Bay width: 270 cm (3 × EPAL) - Beams: 270 cm, Type INP100 or CE110 (box profile) - Beam colour: Blue - Frame type: P120, galvanized, pre-assembled - Levels: Floor + 2 - Pallet spaces: 99, including floor positions - Version: Used SSI Schäfer PR600 - Availability: immediately available ex-stock, multiple units in stock SCOPE OF DELIVERY: - 12 × Frames approx. 4.90 × 1.05 m, galvanized, pre-assembled - 44 × Beams approx. 270 cm (INP100 or CE110) - 88 × Safety pins Price: €2,232.00 net €2,656.08 gross You will receive an invoice showing VAT. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery within Germany by our partner freight forwarder—freight costs depend on postal code - Professional assembly and dismantling by trained teams optionally available - Racking inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible Ledpfx Aezuwmusc Uohk PLANNING & CONSULTATION: Our planning department will be happy to prepare a non-binding quote tailored to your requirements. Whether for new builds, conversions or extensions: we provide expert advice for your racking configuration. SHOWROOM: Feel free to visit our showroom! You can get a comprehensive impression of our pallet racks, shelving systems, and other solutions on site. Many systems are fully assembled and available to experience first-hand. Our specialist consultants are happy to answer your questions and provide individual advice—we look forward to your visit! Still haven’t found the right solution? Visit our website for a quick overview of numerous offers & variations of these items! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone. You’ll find our phone number on our company page. ☎️ You can reach us by phone Monday to Friday, 08:00 am – 4:00 pm. Alternatively, send us a message with your name and number, and we’ll get back to you as soon as possible.

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, This single-sided heavy-duty cantilever rack is ideal for storing heavy long goods such as pipes, profiles, metal bars, steel girders, wooden slats, and sheet material. With an overall length of approx. 13.20 meters, a height of approx. 4.00 meters, and arm lengths of approx. 120 cm, this long goods rack offers high storage capacity across a total of 4 storage levels (base level + 3 levels). Each cantilever arm supports up to 500 kg, and each upright can bear up to 2,250 kg. The cantilever arms are bolted and can be variably adjusted in height via a 200 mm hole grid. The fully hot-dip galvanized material ensures long-lasting protection for both indoor and outdoor use – Available as new stock from our warehouse in Wietmarschen. PRODUCT DETAILS: - Rack type: single-sided heavy-duty cantilever rack - Total length of rack run: approx. 13.20 m - Overall height: approx. 400 cm - Arm length: approx. 120 cm (made from IPE 80) - Upright spacing (center-to-center): approx. 131 cm - Levels: base + 3 storage levels - Load capacity per arm: max. 500 kg (with evenly distributed load) - Load capacity per upright: max. 2,250 kg (with evenly distributed load) - Upright profile: IPE 160, approx. 400 cm, incl. base section - Upright hole pitch: approx. 20 cm - First hole above base: approx. 107.5 cm (top of base) - Topmost pair of holes: approx. 50 cm below upright top (top of upright) - Design: single-sided, arms bolted - Surface: fully hot-dip galvanized - Availability: new stock SCOPE OF DELIVERY: - 11 x uprights, approx. 400 cm, made from IPE 160, incl. base, 20 cm hole grid - 33 x cantilever arms, approx. 120 cm, made from IPE 80 (without deflectors) - Includes all connecting elements - Includes all required bolts - 1 x load sign Price: Lsdpfx Aozuwmbsc Uehk €5,750.00 net €6,842.50 gross You will receive an invoice with VAT shown separately. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery across Germany via our partner carrier – shipping costs depend on postal code - Professional assembly and disassembly by trained teams optionally available - Rack inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also available PLANNING & CONSULTANCY: Our planning department will gladly prepare a non-binding offer tailored to your requirements. Whether new construction, modification, or extension – we will competently advise you on your racking configuration. Not found what you’re looking for yet? Visit our website for a quick overview of many offers and product variations! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone. You will find our phone number on our company page. We are available by phone Monday to Friday, 08:00 – 16:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Leto izdelave: 2010, stanje: zelo dobro (rabljeno), Measuring column in matching transport case Height: 500 mm Diameter: 120 mm Weight: 37 kg Ledpefdzvajfx Ac Ujhk

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Lsdomhhypopfx Ac Ushk Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Lhedpfx Acjmhh Dho Ujk Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Scope of delivery: Lodpfjmhh Dzex Ac Ushk - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standards - Technical telephone support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. When installing outdoors, loading capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening materials (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts available for reorder and extensions can be supplied at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fixing materials (without floor anchors) - With assembly instructions and C4 load labels as per DIN standard - Professional telephone advice - Made in Germany Ljdpfxemhhx Is Ac Ujhk - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with pre-delivery notification. Material is packaged for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowels, and able to accommodate the applied loads. Floor quality, load-bearing capacity, and any required official permits are to be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to the German employers’ liability insurance association, it is recommended that the rack uprights have a minimum 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard type - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms as standard (=4 storage levels) - Load capacity per cantilever arm 600 kg Lhedpfx Acomhhyaj Uek - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable transport with prior notice before delivery. The material is efficiently packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The foundation must be made of concrete, level, suitable for dowelling, and able to bear the applied loads. The suitability and load-bearing capacity of the floor, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to a wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the upright has at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg Lhedpfomhh Ansx Ac Ujk - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Lhsdoh Ek Daspfx Ac Ujk Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) Ledpfx Asmhhf Sjc Ushk - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Materials are sensibly packaged to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Screw system in hot-dip galvanized design: Pickup price: Robust steel construction made of IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section: 1,200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Ledpfx Aemhhl Hsc Ujhk Each upright equipped with 3 bolted cantilever arms, usable depth 1,200 mm, standard (equals 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Mounting hardware included (ground anchors not included) Supplied with assembly instructions and C4 load capacity labels according to DIN standards

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever racking system, powder-coated (RAL 7016 Anthracite): Scope of delivery: - 4 uprights, height 4,200 mm with base part, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm - Longitudinal and diagonal bracing for 1,300 mm upright spacing (system length 4,000 mm) - Fastening materials (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered; extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface coated in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with usable depth of 1,200 mm - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms as standard (= 4 storage levels) - Load capacity per arm: 730 kg - Includes longitudinal and diagonal braces for 1,300 mm upright spacing - System length: 4,000 mm - Fastening materials included (floor anchors not included) - Supplied with assembly instructions and C4 load plates according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance delivery notice. The material is sensibly packed for easy unloading. Delivery is possible approximately 1–2 weeks after order receipt. Lhedpfsmidyfjx Ac Ujk Please note: For outdoor installation, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, and suitable for anchoring, and must be able to take the imposed loads. Customers are responsible for verifying soil condition, load-bearing capacity, and obtaining any necessary official permits. Uprights must be anchored to the floor by the customer; wall mounting is neither necessary nor recommended. According to trade association guidelines, uprights should project at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking, used: Hot-dip galvanized bolt-together system Scope of delivery: - 4 double-sided racking uprights, height 3,500 mm, each with 1,200 mm base parts - 24 cantilever arms, depth 1,200 mm, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. mounting hardware (floor anchors not included) Lhsdpfx Acsmkixwe Usk - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available anytime) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components with hot-dip galvanized finish - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright has 6 bolted cantilever arms and 2 base sections, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (floor anchors not included) - Supplied with assembly instructions and C4 rated load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection available Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notice before delivery. The material is packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, flat, and suitable for anchoring as well as capable of supporting the applied loads. It is the customer's responsibility to check and ensure the suitability and load-bearing capacity of the substrate and obtain any necessary permits. Racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to German safety guidelines, it is recommended that the uprights have a minimum overhang of 500 mm above the highest storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack used: bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) Lsdpsmhh Dtjfx Ac Ujhk - (*No damaged parts!) - (*Spare parts re-orderable, extensions possible anytime) - (*Offer also available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Goods are packed for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, level, suitable for anchors, and able to withstand the applied loads. The customer is responsible for checking and ensuring the floor condition, load-bearing capacity, and any required official approvals. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational health and safety regulations, it is recommended that racks have at least a 500 mm overhang above the top storage level relative to the top edge of the upright.

Stanje: zelo dobro (rabljeno), Clamping angle Height: 2550 mm Width: 1190 mm Ljdjhk I Hgspfx Ac Ujhk Depth: 1100 mm Material thickness: 80 mm Weight: 4.1 t

Stanje: dober (rabljeno), Your contacts at our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank We are offering a used rack impact guard for sale. Suitable for a double rack row: 2 x 1,100 mm rack depth + 200 mm rack connector Scope of delivery: 01x Impact guard rail, used Material color: yellow Total length: approx. 2,455 mm Total length without base plate: approx. 2,400 mm Suitable for a double rack row Total depth: approx. 150 mm Total height: approx. 315 mm Profile dimensions: U 100 x 50 x 10 mm Material thickness: approx. 8 mm Hole diameter: approx. 13 mm Required floor anchors: 8 pcs Lhsdpfx Aedz Uxqsc Uek Our range of services at a glance: (Prices upon request) Assembly and installation Our general assembly conditions must be observed Rack inspection Rack inspection according to DIN EN 15635, carried out in accordance with BGR 234 visual inspection requirements for all rack systems Delivery with our own fleet (unloading not included)

Stanje: kot nova (razstavni stroj), We are offering a second-choice column protector from manufacturer SSI Schäfer for sale. The scope of delivery includes: 01x Column protector, second choice Lhodpfohr U Trex Ac Uek Material colour: yellow Design: V shape Total height: approx. 750 mm Total width: approx. 124 mm Inner width: approx. 116 mm Total depth: approx. 65 mm Leg dimensions: approx. 65 x 65 mm Material thickness: approx. 4 mm Pitch/hole spacing: approx. 300 mm Number of holes: 06 pcs. (03 pcs. per side) Hole diameter: approx. 9 mm 06x Hexagon bolts: M8 x 35 mm 06x Lock nuts: M8 06x Washers: M8 General information about the item: This item is offered for collection only. If transport or shipping is required, additional costs will apply, which can be quoted separately depending on the delivery location and scope.

Stanje: novo, We offer 10 new sales shelves for purchase here. Features: - Shelf height individually adjustable - Shelves can be mounted at an angle (see images) - Castors for flexible warehouse storage - All castors equipped with locking brakes, allowing storage on inclined surfaces - Base frame can be folded up, providing space for a Euro pallet Lhodpfxohu Apue Ac Ujk - Material surface: high-quality chrome finish - Suitable for various industries - Easy and straightforward assembly Technical data and further information: Total height: approx. 1,587 mm Total depth: approx. 855 mm Total width: approx. 1,310 mm Scope of delivery: 10x sales shelves, new consisting of: 01x base frame, new Width: approx. 1,310 mm Depth: approx. 855 mm 01x back panel, new including stabilizing hooks 04x locking castors, new including Allen key for assembly 02x shelves, new Depth: approx. 375 mm 02x shelves, new Depth: approx. 425 mm 01x instruction manual For further details, please refer to the attached drawing. Notes: The shelves are delivered disassembled and must be assembled on site. This is new merchandise; however, the packaging may show minor damage or dirt marks, etc.