Širokopasovne brusilke z delovno širino 1300–1499 mm nakup rabljenega (133)

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.350 mm, skupna masa: 10.000 kg, vhodni tok: 153 A, Heesemann LSM8 Surface Sanding Machine QLkLBw Sanding width: 1350 mm CROSS/LONGITUDINAL/LONGITUDINAL Machine base Feed conveyor unit with single transport belt, feed speed adjustable from 3 – 15 m/min via frequency inverter, including belt cleaning device. Constant working height: 920 mm. Electronic adjustment of the upper machine section for workpiece thicknesses from 3 to 80 mm. Toothed belt lifting gear with dust protection cover; drive control via integrated control cabinet. 1. Cross sanding unit Belt dimensions: 5,400 x 150 mm Drive power: 13/17 kW Sanding belt equipped with additional cleaning/blasting tube, wear-resistant brake, segmented pressure belt system, intermittent belt cleaning/blasting, belt tracking control; inspection door with glass insert. 2. Longitudinal sanding unit Belt dimensions: 2,620 x 1,350 mm Drive power: 13/17 kW Sanding belt with double blasting holes for enhanced belt cleaning, wear-resistant brake, automatic belt length compensation, sanding action against feed direction, intermittent belt cleaning/blasting, infrared belt control. Eccentric bearing on front (steel) roller for light calibration, controlled via operator terminal. 3. Longitudinal sanding unit Belt dimensions: 2,620 x 1,350 mm Belt speed: 0.5 – 18 m/s Drive power: 17 kW (frequency inverter) Infinitely variable sanding belt speed, double blasting holes for advanced belt cleaning, wear-resistant brake, automatic belt length compensation, reverse sanding direction, intermittent belt cleaning/blasting, infrared belt control. 4. Brush Roller Unit Centrally height-adjustable, includes extraction hood and pressure roller. Diameter: 150 mm Drive power: 1.5 kW Bristle: Fibre 5. Workpiece Suction Device For secure feeding of parts shorter than 500 mm, including integrated blower. Electrical connection: 400 V, 50 Hz Belt change: Left Operator terminal: Left Credpfoxp Hvnex Afdod 6. Top-mounted ionization bar Discharges static electricity, including high-voltage transformer. 7. Integrated workpiece cleaning device with rotating compressed air nozzles The machine will be operational upon delivery, following full mechanical and electrical refurbishment by authorized Heesemann service. New conveyor belt installed. On-site commissioning and initial operator training available by arrangement. Transport costs negotiable – loading included in the price. For further details or questions, please contact: Paweł Szczepański +48 795 517 258

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Širokopasovni brusilni stroj HEESEMANN LSM 8, letnik 1997 Csdpfx Ajxurxfjfdsrd

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: A11108GM1, Wide Belt Sander Costa K6 CCC 1350 Year of manufacture: 2001 Technical condition: very good, after a complete overhaul at COSTA in 2023 The Costa K6 CCC 1350 wide belt sander from 2001 is a robust industrial machine designed for sanding and calibrating wooden surfaces. The machine features a fixed working table and a movable working unit with rollers. Constant working height: 890 mm – suitable for integration into production lines. Additionally, the machine is equipped with a vacuum table powered by its own fan. Key technical specifications: - Working width: 1350 mm - Number of sanding units: 3 (steel calibration roller, 2x rubber rollers) - Cleaning or sanding brush Crsdpowczkiofx Afdod - Sanding belt length: 3250 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.300 mm, višina obdelovanca (maks.): 140 mm, model krmilnika: Xinje XD5, lastna masa: 4.500 kg, delovna dolžina: 200 mm, DÉTAILS TECHNIQUES 1re Station : 15 brosses abrasives à godet avec fixation à changement rapide 2e Station : 15 brosses abrasives à godet avec fixation à changement rapide 3e Station : 9 brosses abrasives disposées tangentiellement 4e Station : Rouleau transversal sur toute la largeur avec brosses abrasives 5e Station : Rouleau transversal sur toute la largeur avec brosses abrasives 6e Station : Buse à air sur toute la largeur Largeur de travail : 1 300 mm Longueur de travail : 200 mm Hauteur de la pièce : 3 - 140 mm DÉTAILS DE LA MACHINE Commande : Xinje XD5 Puissance totale requise : 13,4 kW Dimensions & Poids Encombrement : env. 5,1 x 2 x 2,3 m Poids machine : env. 4 500 kg Crsdpfex Tt Uuox Afdsd ÉQUIPEMENT Commande modulaire des unités de modules Variateur de fréquence pour contrôle de la vitesse Plage de hauteur de travail réglable automatiquement Soufflage d'air oscillant à l'extrémité Entretien et remplacement faciles du papier abrasif et des brosses Brosses de rechange Insertions abrasives Bande transporteuse en caoutchouc à motif chevron, avec plaque d'acier pleine surface en dessous

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, obratovalne ure: 3 h, Funkcionalnost: popolnoma funkcionalen, The machine is hardly used, like new, year of manufacture 2021. Table dimensions: 220x80 cm. Cedjudy D Topfx Afdsrd

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, HOMAG Sandteq w-300 Tehnični podatki: - Hitrost pomika traku: 2,5 - 13 m/min - Delovna višina: 900 mm - Delovna širina: 1350 mm - Število obdelovalnih enot: 2 - Debelina obdelovanca: 3 - 160 mm z avtomatskim merjenjem - Dimenzije stroja D x Š x V: pribl. 2115 x 2100 x 2415 mm - Teža stroja: pribl. 4000 kg - Skupna električna moč: pribl. 39 kW - Priporočena predhodna zaščita: 80 A - Vakuumska miza - Q = prečna brusilna enota s Poly V-jermenom / 13,5 kW (2-16 m/s) Crjdpfxexczmzs Afded - X = kombinirana enota s kontaktno valjčko in sistemom pritisnega nosilca / 18,5 kW (2-18 m/s) - Super-finish funkcija: kalibriranje, vmesno brušenje furnirja & laka, fino brušenje furnirja & laka - Krtačna enota - Čistilni rotor z ionizacijo - Powercontrol s Powertouch Stroj je takoj na voljo. Nakladanje na tovornjak je možno.

Stanje: dober (rabljeno), Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, STEMAC wide belt sanding machine for lacquer sanding MICRON 1 R Manufacturer: Stemac Italy Year of manufacture: 1990 S/N S90.503 Working width: 1350 mm Cedstyyl Sspfx Afderd 1 lacquer sanding unit, 20 kW, infinitely variable speed control Sanding belt length: 2620 mm Equipped with cleaning brush Infinitely variable feed Air jet cleaning system for sanding belt Electronic table height adjustment 400 V, 50 Hz Weight approx. 4300 kg Includes several extra sanding papers

Stanje: rabljeno, Leto izdelave: 2006, Tehnični podatki: - Proizvajalec: Bütfering - Tip: Optimat SCO 113/C/DIA - Leto izdelave: 2010 - Širina brusilnega traku: 1370 mm - Dolžina brusilnega traku: 2150 mm - Prostornina odsesavanja: pribl. 3.530 m³/h - Priključki za odsesavanje: 1 x Ø 180 mm (brusilna enota) 1 x Ø 140 mm (finirna krtača) 1 x Ø 100 mm (odsesovalni ventilator) - Kombinirana brusilna enota s preklopnim brusilnim bobnom in brusilno ploščico. - Avtomatsko nastavljiv, profiliran jekleni kontaktni valj z izravnavo zrn za kalibracijo in elektronsko nadzorovanim pritiskalnim nosilcem s paketom za lakiranje. - Nastavljiva hitrost brusilnega traku s frekvenčnim pretvornikom 2–18 m/s. - Vakuumska pritrjevalna naprava, ventilator integriran v podnožje stroja - Pogonski motor: 15 kW - Skupna priključna moč: pribl. 19 kW - Obratovalna napetost: 400 V / 50 Hz - 1 kos UNI-BLOWER na izhodni strani Crodpfjv Ecy Sjx Afded - 2 kosa LIROS/SEOT 09 antistatičnih enot na izhodni strani (zgoraj/spodaj)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.300 mm, skupna masa: 4.000 kg, delovna višina: 1.000 mm, vrsta nastavitve višine: električni, transportna višina: 1.000 mm, Kalibrirni stroj / Širokopasovni brusilni stroj Proizvajalec: Costa Tip: 71 CCT 1350 Delovna širina: 1300 mm Opremljen z: 1x kalibrirni valj (trda guma pribl. 80 Shore), 22 kW, mere brusnega traku 1380 x 2620 mm 1x kalibrirni valj – na novo gumiran (trda guma 60 Shore), 18,5 kW, mere brusnega traku 1380 x 2620 mm 1x brusilni čevelj, 15 kW 1x čistilna krtača 1x izpihovalna enota Regulacija podajalne hitrosti, 4 - 24 m/min. Transportni trak z vakuumom Vakumski ventilator z dušilcem zvoka Delovna višina: 1000 mm Nastavitev višine zgornjega dela stroja (enostavna integracija v obstoječo strojno linijo) Crjdpfx Aoxl N Thsfdsd Priključek: 380 V 50 Hz, 200 A Skupna priključna moč pribl. 65 kW Dimenzije pribl. 3000 x 2500 x 2400 mm (DxŠxV) Teža pribl. 4000 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2007.10.191, širina brušenja: 1.350 mm, dolžina brusnega traku: 4.800 mm, višina obdelovanca (maks.): 150 mm, širina brusilnega traku: 1.400 mm, Automatic Sander + Dedusting Machine Crjdpfx Afoyg Exqjded TECHNICAL DETAILS Sanding width: 1,350 mm Working height: 880 mm Workpiece thickness: 3 – 150 mm Conveyor bed: continuous conveyor belt Conveyor bed drive: 4.0 kW / inverter 7.5 kW Feed speed: 3 – 15 m/min Workpiece vacuum clamping system drive: 7.5 kW Units: 3 x cross sanding, 1 x longitudinal sanding, 1 x brushing unit Cross and Longitudinal Sanding Units Cross sanding unit – sanding belt dimensions: 4,800 x 150 mm Sanding belt speed: 2–20 m/s Drive power per cross sanding unit: 15 kW Pressure lamella belt dimensions cross sanding: 4,350 x 140 mm Longitudinal sanding unit – sanding belt dimensions: 2,620 x 1,400 mm Sanding belt speed longitudinal: 1.8 – 16 m/s Drive power longitudinal: 15 kW Pressure lamella belt dimensions longitudinal sanding: 1,900 x 1,380 mm Brushing Unit Brush roller diameter: 120 mm Drive power: 0.75 kW Air Requirements Air requirement cross sanding units: 91.5 m³/min Air requirement longitudinal sanding unit: 30.5 m³/min Air requirement brushing system: 18.0 m³/min Air requirement conveyor belt cleaning: 13.5 m³/min Air output workpiece vacuum clamping system: 40.0 m³/min Total air requirement: 193.5 m³/min Overall compressed air consumption: 115 m³/h MACHINE DETAILS Total power connection: approx. 80 kW Operating voltage: 400 V Frequency: 50 Hz Main machine dimensions Dimensions (L x W x H): 2,900 x 2,300 x 2,200 mm Weight: approx. 7,000 kg Dedusting Machine EA 8 – Machine No.: 2007.10.192 Sanding width: 1,350 mm Working height: 880 – 920 mm Workpiece thickness: 3–150 mm Required air velocity: 20 m/s Air requirement: 30.5 m³/min Conveyor bed drive: 1.1 kW / inverter 2.2 kW / 0.75 kW Feed speed: 3–15 m/min Fan drive: 5.5 kW Height adjustment drive: 0.18 kW Power connection: 7.0 kW Dimensions (L x W x H): 1,100 x 2,200 x 2,200 mm Weight: 1,900 kg EQUIPMENT - Operator terminal - Dedusting machine EA 8 - Workpiece vacuum clamping system - Multiple cross and longitudinal sanding units - Brushing unit

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Wide Belt Sander CB 1300 R+RR Specification: • Condition – used, after comprehensive inspection and calibration • Manufacturer – CB Credpfx Afew U D Dujded • Model – 2NRKRR13002N • Working width – 1,300 mm • 2 sanding units: - First: calibration drum, hard rubber – Ø 230 mm - Second unit: 2 drums, hard and soft, each with independent adjustment, Ø 160 mm each • Main motors: 2 x 9.2 kW • Conveyor with two working speeds • Electronic thickness gauge for the sanded component • Oscillation control via photocells • Extension support rollers • Electric height adjustment (up/down) • Thickness measuring gauge for the sanded material • Sensor for preventing over-thick pieces from entering • Original paintwork • Abrasive belt size: 1,340 x 2,200 mm • Extraction ports: 3 x 180 mm • Weight approx. 2,200 kg • Early 1990s machine • Overall dimensions: 200 x 220 x 210 cm (L x W x H) Additional information: • Excellent original technical and visual condition • Published photos reflect the actual state of the item for sale • Possibility to power up and test the machine on site

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, širina brušenja: 1.320 mm, višina brušenja: 160 mm, Wide Belt Sander SAC Project RT 1320 Specification: • Condition – used, fully serviced and calibrated • Manufacturer – SAC • Model – Project RT 1320 • Working width – 1320 mm • Max. working height – 160 mm • 2 sanding units: - First: calibrating roller, hard rubber, diameter 300 mm (brand new, freshly coated) - Second: pad unit with sectional pressure shoe and jump-in/jump-out function • Dust extraction brush at the outfeed • Main motors: 10 and 11 kW • Total machine power at full load – 28 kW • Machine controlled by touchscreen panel with memory function for various programs and settings as required • Possible to operate in manual mode (entering your own parameters) or automatic mode (pre-set programs with saved parameters) • Infinitely variable speed of the second sanding unit • Infinitely variable feed speed of conveyor • Electronic thickness indicator for the workpiece • Vacuum pump included • Paper cleaning mechanism • Photoelectric oscillation control • Conveyor in very good condition Crjdpow U Dxfjfx Afdod • Extension support rollers for workpieces • Workpiece thickness gauge • Safety sensor preventing entry of overly thick workpieces • Original paint • Abrasive belt size – 2620 x 1320 mm • Extraction ports – 3 x 175 mm + 120 mm (from brush) • Weight – 2300 kg • Year of manufacture – 2001 • Overall dimensions – 255 x 205 x 230 cm (L x W x H) Additional Information: • Very good, original technical and visual condition • The photos show the actual condition of the machine offered for sale • The possibility to run and test the machine on site

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, širina brušenja: 1.350 mm, The HSM is the perfectly tailored wide belt sanding machine designed to meet the needs of small and medium-sized craft and industrial businesses. Whether you require effect sanding, cross sanding, lacquer or high-gloss finishing, whether processing panels, solid wood, or veneered workpieces – the Heesemann HSM is the ideal sanding machine for professional woodworking! This wide belt sander is especially interesting for joiners and interior fitters. The HSM is available in predefined standard configurations, equipped with two, three, or four sanding units, and can be fitted with a cross belt for cross sanding applications. Units and features can be selected individually. Crjdpow Db Drjfx Afdjd We would be pleased to provide you with a tailor-made quotation.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, širina brušenja: 1.350 mm, The HSM Compact is the universal surface sanding machine for craft businesses. It is designed for calibration, intermediate sanding of veneers and lacquer, structuring, as well as cleaning of panels, solid wood, or veneered workpieces. Thanks to its compact dimensions, it is optimally suited for a wide range of requirements. With the HSM Compact, you receive a multifunctional sanding center on just 4.5 m² of floor space, ideal for achieving diverse surface qualities. It is Heesemann’s smallest machine, equipped as standard with the patented CSD magnetic pressure beam, allowing you to move away from manual sanding to automation. HSM .2 Compact ROLLER/LONGITUDINAL DLB Codpfx Asw Dbx Njfdord - Year of manufacture: 2025 - Sanding width: 1,350 mm - Vacuum clamping system with vacuum extraction table and demand-driven suction - Constant working height (880 mm) - Workpiece thicknesses: 3-200 mm - Automatic workpiece thickness measurement at infeed - Non-driven rollers at machine infeed and outfeed - Electromagnetic pressure beam (CSD) - 15.6″ touch display - LED lighting on the belt support side - Fold-out table with wooden surface at outfeed - Structuring brush unit (Ø 200 mm) incl. 5.5 kW drive via frequency converter and quick-change system, fitted with Anderlon bristles - Cleaning brush unit, horsehair (Ø 120 mm)

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, širina brušenja: 1.350 mm, The JSM is an affordable all-round machine for small and medium-sized craft businesses with high demands on surface quality. It is available in two sanding widths and three equipment packages. Depending on the package, it is ideally suited for solid wood, veneer, and lacquer sanding. - Sanding width: 1,100 or 1,350 mm - Feed unit with profiled conveyor belt - Feed speeds: 3 - 12 m/min - Variable working height via motorized height adjustment (maximum table height: 880 mm) - Workpiece thicknesses: 3 - 160 mm - Pressure roller (Ø 50 mm) - Table extension with non-driven rollers at machine infeed and outfeed (300 mm each) Credpfewz Ignjx Afdod - 15.6" touch display (integrated) - CSD pressure beam system (magnetic pressure beam) - Program for remote maintenance - Sanding belt length: 2,150 mm, sanding belt width: 1,120/1,370 mm - Energy Management System (EMS) for energy-efficient machine operation - 1 emergency stop switch at the terminal, 2 emergency stop switches at the machine outfeed - LED lighting inside the machine (on the belt feed side) - Terminal and belt feed side on the left - Electrical configuration: 400 V, 50 Hz Advanced package additional features: - Vacuum table pre-drilled for connection of vacuum blower - Vacuum blower integrated within the machine - Workpiece cleaning with oscillating air blast tube - CSD pressure beam system (magnetic pressure beam) instead of ACP system - Oscillating sanding belt cleaning - Belt Manager software

Stanje: rabljeno, Leto izdelave: 2004, • Cutting width (mm): 1300 Cjdett Slcspfx Afderd • Maximum workpiece thickness (mm): 3 - 140 • Deburring unit: Brush roller diameter 150 mm • Drive for deburring unit (kW): 1.5 • Conveyor bed: 3.0 kW frequency-controlled, 4.0 kW • Feed speed (m/min): 5 - 25 • Workpiece transport belt with vacuum clamping system (kW): 7.5 • Total weight (kg): approx. 7500 • Total connected load (kW): approx. 73

Stanje: dober (rabljeno), Leto izdelave: 2000, • Sanding width (mm): 1350 • Workpiece thickness (mm): 3 - 150 • Total sanding units: 2 • Longitudinal belts: 2 • Contact roller diameter = 200 mm: 1 / 15 kW Crodpfx Afowwlm Doded • Combination unit: with small roller • Cleaning brush: 1 x diameter = 120 mm • Vacuum table • Intermediate lacquer sanding • Constant table height • Carpet cleaning • Longitudinal unit, motor: 15 kW, 1.8 - 18 m/s • Feed rate: 3 - 12 m/min • Sanding belt length, longitudinal unit (mm): 2,100 x 1,400 • Pressure beam: CSD system, electromagnetic, wear-free • Conveyor belt: new • Availability: inspected, in stock

Leto izdelave: 1997, stanje: dober (rabljeno), • Working width (mm): 1300 • CSD system Csdpfxeidi Ivs Afderd • Cross sanding unit • Longitudinal sanding unit - shoe type • Brushing unit • Ionisation

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2011, Wide Belt Sander DMC USK 1350 M3 – Italian-made – Cross-belt unit, also known as a 'sergeant' unit – Year of manufacture: 2011 – Equipped with both electric and pneumatic ionizers TECHNICAL SPECIFICATIONS: Maximum sanding width: 1350 mm Sanding height range: 4–170 mm Minimum workpiece length: 365 mm Vacuum table 1st Unit: – Cross-belt (sergeant-type) – Motor power: 12 kW 2nd Unit: – Rubber roller – Hardness: 95 Shore – Diameter: 240 mm – Motor power: 18.5 kW 3rd Unit: – Rubber roller – Hardness: 55 Shore – Roller diameter: 300 mm – Motor power: 15 kW 4th Unit: – Pneumatic pad – Motor power: 15 kW 5th Unit: – Cleaning brush – 2.2 kW 6th Unit: – Air blower – Blowing on belt – Pneumatic oscillation Feed speed: 2.5–18 m/min Pneumatic belt tensioning Electric height adjustment Extraction port diameters: 3 x 200 mm, 8 x 80 mm, 2 x 160 mm, 1 x 150 mm Transport dimensions (L/W/H): 370 x 250 x 250 cm Cjdpjgr Er Sofx Afderd Weight: 5000 kg

Stanje: rabljeno, Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, širina brušenja: 1.350 mm, višina brušenja: 150 mm, delovna višina: 150 mm, vrsta nastavitve višine: električni, višina obdelovanca (maks.): 150 mm, - Very good condition - Year of manufacture: 1993 - Electronic PLC control by Heesemann - Model / Type: LSM 6 TECHNICAL SPECIFICATIONS: - Working sanding width: 1350 mm - Max. thickness of sanded elements: 150 mm MACHINE CONFIGURATION: I – Cross sanding unit with electronic sequential pressure shoe - Main motor: 13 kW - Pneumatic photocell-controlled oscillation - Extraction outlet: 1 x 180 mm - Sanding belt size: 5480 x 150 mm II – Combination unit with pad - Main motor: 13 kW - Belt cleaning system with oscillation - Pneumatic pressure pad - Pneumatic photocell-controlled oscillation - Extraction outlet: 1 x 180 mm - Sanding belt size: 2620 x 1350 mm - PNEUMATIC PHOTOCELL OSCILLATION - Pneumatic cleaning bar system with belt oscillation III – Combination unit with pad - Main motor: 13 kW - Sanding belt cleaning system - Pneumatic pressure pad - Extraction outlet: 1 x 180 mm - Sanding belt size: 2620 x 1350 mm IV – Cleaning brush unit following the main unit, at outfeed - Motor: 1.1 kW - Extraction outlet: 1 x 140 mm - Feed by variable speed gear motor: 4 kW - Feed speed: 6–26 m/min Crsdpfx Ajw H Sk Tefdod - Airflow requirement: approx. 28 m/sec, 4340 m³/h - Compressed air consumption: approx. 800 l/min - Feed belt: 5-segment - Pneumatic cleaning system for feed belt - Automatic sanding height adjustment with electronic display - Motor: 0.55 kW - Suitable for lacquer and intermediate lacquer sanding - Dimensions (L/W/H): 3750 x 3230 x 2300 mm - Weight: approx. 8000 kg

Leto izdelave: 2004, stanje: dober (rabljeno), Ta linia Costa jest na sprzedaż (dostępna w magazynie) KKH-CCTT + CCTT 1350, rok produkcji 2004, jednostronna i dwustronna obróbka 266 kW 504 A 2 x 1 = walec stalowy 37 kW 2 = walec gumowy 25 kW 3 = stopa 17 kW sterowana elektronicznie 4 = stopa 17 kW sterowana elektronicznie Linia znajduje się w dobrym stanie Codpfsh Nqn Hjx Afdsrd

Leto izdelave: 1995, stanje: zelo dobro (rabljeno), 2 grinding aggregates with 22kW motors each Cleaning brush Variable feed speed control Vacuum extraction of the workpiece Crjdpohxvi Eefx Afdjd Powered outfeed roller table

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Wide Belt Sander SCM Sandya 40 M1 Year of manufacture: 2000 S/N: AE/020761 Manufacturer: SCM Group S.p.A Italy Crjdpfx Afetttafedod Sanding width: 1,350 mm Workpiece thickness: 4–170 mm (min–max) 1 sanding unit, calibration roller 250 mm diameter Roller hardness: 55° Shore Vacuum table Main motor: 11 kW (15 HP) Sanding belt length: 2,620 mm Feed speed: up to 19 m/min Feed speed continuously adjustable Fixed working height: 900 mm Air jet cleaning for sanding belt Electropneumatic segment control Belt change from the left side SYEL CN 51 control system Feed carpet with speed regulator Electronically controlled belt oscillation Main motor with disc brake Rubber-coated pressure rollers Automatic conveyor belt centering Automatic table positioning Air consumption: 15 Nl/min Operating voltage: 400 V / 50 Hz Total power: 40 Amp Dimensions (L x W x H): 1,917 mm x 2,134 mm x 2,365 mm Weight: approx. 2,540 kg

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, delovna širina: 2.000 mm, skupna masa: 14.000 kg, višina mize: 900 mm, Equipment: 1 working group with calibration roller 1 working group with segmented magnetic CSD pad controlled by CNC Crodpfswy Nxvjx Afded 1 working group with segmented magnetic CSD pad controlled by CNC

Stanje: dober (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.300 mm, 1 lower sanding and calibrating machine equipped with 3 lower sanding belts 30, 22, 18.5 kW 1 upper sanding and calibrating machine equipped with 3 upper sanding belts Cjdpfxjw A A Enj Afdjrd