Zunanje Valjaste Brusilni Stroj nakup rabljenega (29.296)

Stanje: rabljeno, Leto izdelave: 1997, Tehnične podrobnosti: Fjdpox Aq Egofx Abtegc Modul - maks.: 7 Teža stroja cca: 5 t Premer brusnega polža: 280-350 mm Širina brusnega polža: 84-104 mm Min. število zob: 6 Maks. število zob: 600 Največji dovoljeni premer glave: 360 mm Maksimalna teža obdelovanca: 60 kg brez filtra z hladilnikom hidravličnega olja in vračanjem brusilnega olja

Stanje: rabljeno, Leto izdelave: 1979, Cylindrical grinding machine SKF with internal grinding attachment, hydraulic Fodsgt Ea Rspfx Abtegc

Stanje: rabljeno, številka stroja/vozila: 0257391, Centre height: 160 mm Centre distance: 1500 mm Grinding wheel dimensions: 500 x 127 x 40 mm Grinding wheel speeds: 1570/2050 rpm Electrical connection: 380 V kW Required space: 4400/6400 x 2000 x 1400 mm Fjdpfx Aogayiwobtogc Weight: approx. 4000 kg

Leto izdelave: 1975, stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: M-27 738, Centre height: 165 mm Centre distance / grinding length: 1000 / 1075 mm Max. grinding diameter: 250 mm Table swivel range: +/- 8° Max. longitudinal table travel: 1210 mm Workpiece headstock swiveling: 0 - 90° Spindle bore / taper: 38 mm / MT 5 Fjdpfsd Rv Rbjx Abtjgc Grinding spindle head, single swivel Hydraulic rapid traverse approx.: 50 mm Grinding wheel dimensions: 400 x 50 x 127 mm 2 grinding wheel speeds via stepped V-belt pulley Drive power: 3 kW Space requirements: 2900 x 2200 x 1750 mm Weight: approx. 3.5 t

Stanje: novo, Leto izdelave: 2024, Grinding wheel DxW 455 x 255 mm, workpiece diameter 1 - 60 mm, Fjdpfxodlgq Uo Abtogc Regulating wheel DxW 255 x 255 mm, regulating wheel speed 10 - 100 rpm, Drive power main spindle 11 kW, weight approx. 3.7 t, dimensions approx. 2,700 x 1,700 mm The machine is suitable for through-feed and plunge grinding, featuring hardened and ground guideways, grinding and regulating spindles with hydrodynamic three-point bearings, centralized lubrication for slide and infeed spindles, regulating wheel drive by three-phase motor, frequency-controlled, hydraulic dressing devices for grinding and regulating wheel, electrical equipment mainly with Siemens components, control cabinet assembled in Germany. GC 1810-NC with stepper motor and Siemens S7 control for plunge and infeed motion. Very cost-effective price/performance ratio.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2026, Proizvajalec: TSCHUDIN Tip stroja: SL 105U Foded Adfuopfx Abtogc Letnik izdelave: 2024 Delovni vretenjak: MK6 Kontra konjiček: MK4 Višina konic: 175 mm Razdalja med konicami: 1000 mm Dolžina brušenja: 1000 mm Krmiljenje: Siemens 840D SL Prostorske potrebe stroja: 4920x3400x2300

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 32461/2384, Country of Manufacture: Switzerland Voltage: 380 V / 50 Hz / 3-phase Net Weight: 2,200 kg TECHNICAL DATA Nominal centre distance: 600 mm Maximum centre distance (workpiece spindle head to tailstock extended): 750 mm Standard centre height: 125 mm Centre height with interchangeable intermediate plates (workpiece spindle + tailstock): 175 – 250 mm Maximum swing diameter (125 mm centre height): 250 mm Maximum swing diameter with intermediate plates: 350 – 500 mm Swivelling range of work table (left/right): 10° each Maximum grinding length (table width = 200 mm): 900 mm Table speed, hydraulically infinitely variable: up to approx. 6 m/min Table reversal delay: 0–5 sec Fsdpfx Asd Amifobtogc Grinding wheel for cylindrical grinding (diameter x width x bore): 350/400 x 50 max. x 127 mm Grinding wheel for surface grinding (diameter x width x bore): 250 x 13 x 76 mm Grinding spindle speeds: 1,500 / 1,700 / 2,200 / 3,600 rpm Swivelling range of grinding spindle head: 270°, lockable every 90° Vertical traverse of grinding spindle head (centre height): 125–350 mm Cross traverse of grinding slide: 285 mm Hydraulic rapid infeed and retraction of the grinding slide: 40 mm Feed per table reversal, stepless: 0.001–0.03 mm/rev. Plunge grinding stock removal: 0–0.9 mm/rev. Micrometer stop for infeed per division: 0.001 mm/rev. Swivelling range of workpiece spindle head: 360° Workpiece speeds, steplessly adjustable, standard/special: 20–400 / 10–400 rpm Internal taper, workpiece spindle/tailstock: Morse 5 / Morse 3 Grinding spindle motor approx.: 4 hp Errors and omissions excepted. Technical data provided subject to confirmation. Inventory no. 2170089, Machine accessories list: - 1 Workpiece spindle head, Morse Taper 5 - 1 Sine bar without comparator - 1 Grinding spindle head with 4 drive pulleys - 1 Tailstock, Morse Taper 3 - 1 Collet clamping system with extractor and reduction sleeve B32 - 1 Internal grinding attachment with Fischer UJ50x250 arbor, drive pulley Ø 48 mm for 14,000 rpm - 1 Rotatable wheel dressing unit with 50 mm base - 1 Table swing stop without comparator - 1 Coolant system with decantation - 1 Ejector - 1 Balancing bar

Stanje: rabljeno, Cylindrical grinding machine, external cylindrical grinding machine, internal cylindrical grinding machine, centre grinding machine, centre hole grinding machine Fgjdpsfig Sujfx Abtec - Precision universal cylindrical grinding machine - Max. shaft diameter: 203 mm - Max. grinding length: 490 mm - Collet chuck: Ø 32 x 87 mm - Grinding wheel diameter: 160 mm - Dimensions: 1660/1500/H1500 mm - Weight: 1802 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: GD12002, teža obdelovanca (maks.): 150 kg, dolžina brušenja: 1.000 mm, premer brušenja: 360 mm, skupna masa: 4.700 kg, Brez minimalne cene – zagotovljena prodaja najvišji ponudbi! TEHNIČNI PODATKI Maks. premer brušenja: 360 mm Maks. dolžina brušenja: 1.000 mm Maks. teža obdelovanca: 150 kg PODROBNOSTI O STROJU Moč glavnega pogona: 5 kW Mere & Teža Dimenzije (D x Š x V): 3.030 x 2.250 x 2.030 mm Teža: 4.700 kg OPREMA PLC krmiljenje Konjiček Delovna vretena Brusilno vreteno s prirobnico in brusnim kolutom Notranja brusilna enota Fedpfxey Ukz Uj Abtegc Sistem za mokro brušenje Električno ročno kolo Delovna luč Centrična konica Vpenjalna glava Priročnik

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, obratovalne ure: 20.045 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 300 mm, pomik po osi Z: 450 mm, največja hitrost vretena: 60.000 obr/min, hitrost vretena (min.): 9.000 obr/min, obremenitev mize: 300 kg, skupna masa: 4.500 kg, pomik osi W: 450 mm, Oprema: dokumentacija / priročnik, Naprodaj rabljeni koordinatni brusilni stroj Hauser S35-400, letnik 1997, v vzdrževanem stanju z raznim dodatkom po slikah. Premiki: X-os: 500 mm Y-os: 300 mm W-os: 450 mm Fedpsyywb Ssfx Abtjgc Hitrost pomika Z (brezstopenjsko): 0,5-14000 mm/min Mere mize: 600 x 380 mm Največja obremenitev mize: 300 kg Krmiljenje: GE Fanuc Series 16-M Mere (d/š/v): 4,25 m × 4 m × 3,25 m Skupna teža: 4500 kg Stroj je takoj na voljo! Cena vključuje nakladanje na tovornjak!

Stanje: rabljeno, Bütfering Optimat SBO 109K Širokopasovni kalibrirni in finiš brusilni avtomat Kombinirani agregat s kontaktno valjo in brusno čeveljčko Jeklena kontaktna valja, nastavljiva po višini s kompenzacijo zrnatosti Delovna širina 950 mm Upravljalna plošča z LED prikazovalnikom debeline Fjdpjzcanljfx Abtogc Nastavitev debeline in hitrost podajanja nastavljivi preko večnamenske ročice na upravljalni plošči Moč motorja ca. 11 kW 2 hitrosti podajanja: 4 / 8 m / min. Stroj je DELAVNIŠKO OBNOVLJEN v ODLIČNEM STANJU Iz obrtniške delavnice Na zalogi v Liebochu

Stanje: rabljeno, Kündig PRIMO - 1100 KONSTANTNA MIZNA STROJNA GLAVNA avtomatska nastavitev glave Širokopasovni kalibracijsko-fini brusilni avtomat Kombinirani agregat: kontaktni valj in brusilni blazinici z elektronsko krmiljenim segmentnim brusilnim čevljem Fgodpfjzb Eprex Abtjc Pogonski motor traku: 9 kW Raven kontaktnega valja brezstopenjsko nastavljiv glede na granulacijo Vhodna miza z valjčnim ležiščem Delovna širina: 1100 mm Podajalna hitrost: 3 - 15 m/min, brezstopenjsko nastavljiva Hitrost brusilnega traku brezstopenjsko nastavljiva Avtomatika nastavljanja debeline obdelovanca ENORMATIC hitro nastavljanje Švicarska kakovost iz rokodelske delavnice Prva dobava leta 2003 Stroj je v delavnici generalno obnovljen v TOP STANJU Na voljo iz zaloge Lieboch

Stanje: rabljeno, SCM Sandya 600 RCS 110 Širokopasovni kalibrirni finiš brusilni avtomat Zahtevni brusilni center za kalibracijo, brušenje masivnega lesa in finiš brušenje furnirja VRHUNSKA OPREMA 1. Kalibrirna brusilna enota z RA poševno rebrastim jeklenim kontaktnim valjem 2. Kombinirana brusilna enota s kontaktnim valjem premera 140 mm, trdota 85 Shore, elastični členasti brusilni čevelj s sektorji elektronsko krmiljen Delovna širina 1100 mm Glavna moč motorja 15 kW Izvedba "B" za RCS MESAR elastični členasti brusilni čevelj Fgsdpfxjzb Dvwj Abtjc Elektronska programska enota "LOGIC SC zaslonsko krmiljenje" Elektronska nastavitev delovne višine z avtomatskim prepoznavanjem obdelovancev Valjčna miza na vstopu in izstopu za dolge obdelovance Stroj iz male obrtne delavnice / LEASINGNI ODKUP Prva dostava 2017 Na zalogi v Liebochu / MOŽNOST LEASINGA

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, skupna masa: 1.700 kg, Oprema: dokumentacija / priročnik, Univerzalni stroj COMEC RCG 900 za obnovo glav, blokov, bobnov in diskov osebnih in gospodarskih vozil. Širina obdelave: 320 mm Dolžina obdelave: 900 mm Največja delovna višina: 370 mm Fgodpfoy Rffyox Abtoc Največji hod mize: 1200 mm Pomik: 0,8 - 450 mm/min Največji premer zavornih bobnov: 1400 mm Glavni motor: 5,5 Hp Obrati za obdelavo zavor: 35-70-50-100 vrt/min Približna teža z dodatki: 1700 kg Dimenzije: 2300 x 790 x 1700 mm (V)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Wide Belt Sander VIET Target 211 A Fgsdpfx Abey Exhwetsc Calibration and fine sanding machine with 2 sanding units and a single motor, top sanding configuration Working width: 1100 mm Sanding belt dimensions: 2200 x 1130 mm Workpiece dimensions: 4 - 160 mm Motor for table height adjustment: 0.18 kW, 400 V, 50 Hz Main motor: 8.0 kW, 400 V, 50 Hz 2 feed speeds 1st Unit: Sanding roller, rubber-coated, 90 Sh 2nd Unit: Sanding pad, rigid & air-cushion sanding pad, time-controlled Compressed air requirement: approx. 6 bar Extraction port diameter: 2 x 150 mm Dimensions (approx.) L x W x H = 1700 x 1750 x 1800 mm Weight (approx.): 1400 kg Automatic workpiece thickness setting with digital display Workpiece thickness adjustment via foot pedal Automatic conveyor belt centering Sanding belt oscillation Sanding belt (emergency) stop with disc brakes Table extension with 2 rollers on infeed and outfeed sides Emergency stop Main switch CE compliant INCLUDES many sanding belts INCLUDES 2 pcs. re-covered graphite sanding shoe inserts NEW bearings for deflection rollers NEW V-belts for the drive motor Note on used machines: • Technical information and prior sale subject to change. • Listed prices are ex-works – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and phone number!)

Stanje: zelo dobro (rabljeno), Working width: 1360 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,360 x 1,900 mm Variable feed speed: 7 - 14 m/min Feed motor power: 1.1 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 2160 x 2260 x 2025 mm Weight: approx. 2200 kg 1st unit: Steel contact roller Motor power: 15 kW, 400 V, 50 Hz 2nd unit: Sanding pad, rigid for fine sanding of solid wood & pneumatically timed sanding pad for veneer 3rd unit: Cleaning brush Abrasive belt oscillation with limit switch Conveyor belt oscillation, pneumatic Motorised thickness adjustment with LED display Units with emergency brake system Emergency stop button at infeed Roller table extension at infeed Complete documentation Note on used machines: • Technical details and prior sale subject to change. • Prices quoted ex site – loaded free of charge! • The machine has been cleaned and tested for functionality. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to enquiries with your address and telephone number!) Fgedpfxoych Igj Abtjc

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Working width: 1,100 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,120 x 1,900 mm Variable feed speed: 2.6 – 13 m/min Fsdpfjychqzjx Abtjgc Feed motor power: 1.10 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 1,705 x 1,545 x 1,905 mm 1st Unit: Steel contact roller, Ø 160 mm Motor power: 15 kW, 400 V, 50 Hz 2nd Unit: Combination unit, rubber-coated contact roller (Sh 65), fixed sanding pad Motor power: 11 kW, 400 V, 50 Hz Abrasive belt cleaning by compressed air 3rd Unit: Cleaning brush Multifunction display Multifunction lever (conveyor belt, workpiece thickness adjustment) Electronic abrasive belt oscillation Pneumatic oscillation of conveyor belt Motorised workpiece thickness adjustment with LED display in 0.1 mm steps Units with emergency brake device Emergency stop button at infeed & outfeed Motor protection switch Roller table extension at infeed with 2 idler rollers Automatic star-delta starting Complete documentation Note for used machines: • Technical data subject to change and prior sale. • Prices quoted are ex-works and refer to collection only – loaded free of charge! • The machines have been cleaned and function tested. • All machines are sold as seen, without any warranty whatsoever. The buyer is welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Enquiries will only be answered if you provide your address and telephone number!)

Stanje: dober (rabljeno), Leto izdelave: 1992, Single-piece sanding machine Fgedpfxowyda Us Abtec Sanding from above & below Electric height adjustment with digital display Infinitely variable feed speed Star/delta start Pneumatic belt tensioning Main switch Sanding belt oscillation Finish brushing unit above and below, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Including infeed and outfeed roller conveyor, L = 1600 mm, non-driven Note on used machines: • Subject to technical changes and prior sale. • Stated prices are ex-works – free loading at location! • The machines have been cleaned and function tested. • All machines are sold as seen, with no warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements are only valid if made in writing. (Inquiries will only be answered with your address and telephone number!)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 615 B, Stroj je delujoč, manjka rezervoar za hladilno tekočino, potrebno je barvanje. Fedpfx Ajza A E Uobtsgc

Stanje: rabljeno, Manufacturer: CINCINNATI Fodjwrpykepfx Abtjgc

Stanje: rabljeno, Kündig ENORM PRIMO – TOP STROJ S KONSTANTNO MIZO / avtomatska nastavitev glave Avtomatski stroj za kalibracijo in fino brušenje z širokim trakom Kombinirana enota kontaktni valj in pnevmatična brusilna blazina Enormatic Digitalni prikaz debeline za debelino obdelovanca Fgsdjy Tutropfx Abtsc Moč motorja pogona traku približno 9 kW Višina kontaktnega valja brezstopenjsko nastavljiva glede na zrnatost Vhodna in izhodna miza z valjčnimi nosilci Delovna širina 1100 mm Hitrost podajanja 2,5 - 15 m/min Stroj bo DELAVNIŠKO OBNOVLJEN Na zalogi Lieboch

Stanje: pripravljen za uporabo (rabljen), Number of sanding units: 2 pcs Sanding width: 190 mm Maximum sanding height: 4–180 mm HESS - GLORIA 2 BELT INDIVIDUAL WOOD SANDING MACHINE ----- Manufacturer’s Description: ----- Compact design engineered according to modern standards. Quiet and vibration-free operation due to a rigid, stable machine frame and special insulation. Safety features meet the requirements of the EC Machinery Directive, delivered with “dust-tested” certification. Offset sanding units equipped with large tension rollers for effective heat dissipation and stable abrasive belt tracking. Sanding units with forced sanding-belt oscillation. Dual-point sanding dust extraction directly at the sanding drum. Fine dust extraction at the large tension rollers. Integrated belt blow-off device increases belt life. Integrated, adjustable brush and finishing unit with large dust extraction via threaded spindle. Motorized thickness adjustment of the complete top unit using precision-threaded spindles and linear ball bearings mounted on hardened and ground precision shafts, with dust and dirt protection. Electronic digital display for workpiece thickness (resolution 0.1 mm). Contact roller and sanding shoe sized in a balanced ratio to abrasive grain load. Hardened and ground sanding drums. Maintenance- and wear-free oxide ceramic sanding shoes (DBGM) provide excellent sliding properties, efficient heat dissipation and high dimensional accuracy. Sanding belt tension via pneumatic cylinder. Belt exchange using pneumatically controlled belt release. Option to adjust belt tracking during belt change. Electropneumatic pressure monitoring with visual fault indicator for compressed air supply. Automatic machine stop for belt breakage and with infeed guard including integrated wood thickness control. Visual indicator on the operator control panel. Feed system utilizes proven, calibrated, slip- and non-slip-resistant conveyor belts running over precisely ground tables and spring-loaded pressure rollers. Cardan shaft drive ensures consistent wood transport. Infinitely variable feed speed. Chip removal adjustment (bottom) via precision-threaded spindle, with dial indicator (resolution 0.1 mm). Ergonomically arranged control and adjustment elements on the machine front: top sanding and brushing unit, bottom sanding and brushing unit, workpiece transport device, sanding thickness adjustment, operation indicator, fault indicator. Integrated control and operator panel within the machine housing, including lockable main switch. All motors electronically protected against overload. Technical Specifications: ----- Sanding belt speed: 24 m/sec Sanding width: 190 mm Sanding thickness: 4–180 mm Minimum workpiece length: 300 mm Feed speed: Infinitely variable 5–25 m/min Sanding belt dimensions: 200 mm wide x 1600 mm long Electrical connection: 400 V, 3/N PE, 50 Hz Sanding units: 2 x 4 kW Feed motor: 0.75 kW Height adjustment: 0.18 kW Fsdjv D Rg Depfx Abtogc Pneumatic connection: R 3/8", 80 NL, 8 bar Extraction air volume: 2 x 2000–2500 m³/h, 20–25 m/sec Extraction connection sockets: 2 x 160 mm diameter, top of machine housing External dimensions: Length: 1600 mm ...

Stanje: pripravljen za uporabo (rabljen), Number of sanding units: 4 pcs Sanding width: 190 mm Maximum sanding height: 180 mm Control: yes Weight: 3,300 kg Dimensions (L/W/H): 2,600 x 920 x 1,890 mm Extraction port diameter: 2 x 180 mm, 2 x 120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sanding machine + disc unit from above/below Manufacturer's description: ----- Fedpfx Abjvu Hgbjtjgc Double-sided four-belt single-piece wood sanding machine for sanding solid wood, such as window profiles, etc. Exceptionally robust top model featuring innovative design details. Suitable for heavy-duty continuous operation, even with higher material removal rates. - Sequentially arranged sanding units for rough sanding, fine sanding, and finishing, from both above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and pad 3. Finishing unit with fibre brush (see special equipment below) - Directly driven sanding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated sanding pads providing excellent thermal conductivity and absolute dimensional stability - Independent cooling of sanding zones for cooler sanding results and extended abrasive belt life - Positively guided, pneumatically controlled sanding belt oscillation - Effective dust extraction directly at the sanding rollers - Ambient dust extraction at tension rollers - Integrated brushing and finishing device with large-volume dust extraction - Motorized sanding thickness adjustment via precision leadscrews and oversized linear ball bearing systems, mounted on hardened, ground precision shafts with dust and dirt protection - Adjustment of material removal below via precision leadscrew with scale ring for measurement display (resolution 0.1mm) - Sanding belt tensioning by pneumatic cylinder with constant clamping force - Quick sanding belt change with pneumatic belt release within seconds - Adjustable belt tracking for sanding belt replacement - Electro-pneumatic compressed air monitoring - Infeed safety via contact roller for over-thick workpieces - Workpiece transport via calibrated, slip- and grip-resistant conveyor belts over heavy cast iron tables with finely planed surface, and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth, uniform workpiece feed - Feed gear motor with stepless speed adjustment 4–20 m/min - All motors electrically protected - Ergonomically arranged controls - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1,800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2–180 mm - Four brake motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fibre brushes D 120 x 200 mm each 0.37 kW - Extraction ports: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with Softdisc: 2,740 mm), 2,600 mm - Length with control panel (with Softdisc: 3,035 mm), 2,985 mm - Width: 880 mm - Height: 1,910 mm - Weight: approx. 3,300 kg - Operating voltage: 400 V, 50 Hz, 3-phase - CE-compliant design Equipped with the following options: - Sanding belt air blast system (4-belt) via nozzles directly at the radii ...

Stanje: nepreverjeno (rabljeno), Number of sanding units: 4 pcs Sanding width: 190 mm Max. sanding height: 4–180 mm Fgedpfxst Tqy Eo Abtec Weight: 4200 kg Hess Expert 4-Belt Single-Piece Wood Sander Ø Sanding from below and above Ø Each with 2 staggered sanding units (top and bottom) Ø Sanding units (top and bottom) connected in series according to the precision planing principle Ø Pre-sanding with coarse grit (calibration) Ø Fine sanding with fine grit (finish) Ø Central motorized height adjustment of the lower sanding units Ø Central motorized and synchronous height adjustment of the complete upper sanding and brushing units, including the upper transport units Ø Oscillating belt use (during the sanding process) Ø Absolute power transmission via 5.5 kW motors and large dimensioned drive drums Ø Oxide-ceramic sanding shoe for - precise surface geometry - no readjustment required - permanent dimensional accuracy - completely maintenance- and wear-free Basic structure: Stable, heavy welded construction made of thick-walled rectangular profiles with additional, statically calculated stiffeners for optimal vibration damping. Staggered sanding units with large-diameter belt drive drums for slip-free belt tracking. Dual-point extraction for direct and airborne dust with sealing brushes and integrated sanding belt air-blast device to extend belt service life. Sanding units in robust steel plate construction serve as the base for vibration-damped, smooth belt operation. Absolutely backlash-free guidance by ball-type linear sets made of hardened and ground shafts. Height adjustment of the sanding units via hardened and ground special linear guides and preloaded carriage units. Long-term precision is ensured by dust and dirt protection of the ball linear sets and carriage units. Large-diameter presanding rollers as contact drums. Contact drums and sanding shoes are balanced relative to the sanding belt grit stress. The oversized drive drums guarantee the full power transmission of the 5.5 kW sanding motors to the sanding belt, ensuring slip-free, stable running and optimal heat dissipation, allowing for maximum material removal. Automatic machine stop in the event of belt breakage. Optical display at the control panel and via signal light on the machine. Sanding shoes for finishing are entirely maintenance- and wear-free, made from oxide-ceramic with optimal heat dissipation. Belt tensioning is provided by appropriately sized compression springs. Belt release for belt change is done via a pneumatic unit for gentle and distortion-free installation of new belts. The upper sanding and brush units are centrally and motor-driven height adjustable, with digital display at the control panel for motorized sanding thickness adjustment. Brush and finishing device, for improved surface finish, is integrated into the base machine. Two vertically arranged special brush rollers, 150 mm Ø, run in the direction of feed. Separate height adjustment of the brush rollers on precision carriage guides allows adjustment for wear compensation. An additional transport roller is provided for ejecting or further transporting the workpiece from the sanding machine, linked to the conveyor belt. Wood guiding at the infeed area for hard, double-sided...

Stanje: novo, Number of sanding units: 4 units Sanding width: 190 mm Max. sanding height: 180 mm LÖWER DoubleSander Solid DSM 2004 ----- Double-sided four-belt single-piece sanding machine for sanding solid wood, such as window profiles etc. Extremely robust top-class design with innovative features. Suitable for high continuous loads, even with higher material removal rates. - Sequentially arranged sanding units for pre-sanding, fine sanding, and finishing, each from above and below: 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubber-coated roller and pad 3. Finishing unit with fibre brush - Direct-drive sanding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated sanding pads with excellent thermal conductivity and precise dimensional accuracy - External cooling of sanding zones for cooler sanding and longer sanding belt life - Forced, pneumatically controlled sanding belt oscillation - Efficient sanding dust extraction directly at the sanding rollers - Fine dust extraction at the tension rollers - Integrated brushing and finishing device with large sanding dust extraction - Motorised sanding thickness adjustment via precision lead screws and large-dimension linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of material removal (bottom) via precision lead screw with scale ring and indicator (resolution 0.1 mm) - Sanding belt tensioning via pneumatic cylinders with constant tension - Rapid sanding belt change with pneumatic belt relaxation in seconds - Adjustable belt tracking during belt change - Electro-pneumatic compressed air monitoring - Infeed protection via contact roller for oversized workpieces - Workpiece transport via calibrated, slip-resistant conveyor belts over heavy cast tables with finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth, even workpiece feed - Feed gearbox motor with stepless speed control, 4-20 m/min - All motors electrically fused Fgedjvnv Tqepfx Abtoc - Ergonomically arranged control elements - Digital thickness indicator (resolution 0.1 mm) with modern magnetic tape system Technical Data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2-180 mm - Four brake motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4-20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fibre brushes D 120 x 200 mm each, 0.37 kW - Extraction nozzles: 2 x 180 mm, 2 x 120 mm - Extraction airspeed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with soft disc 2740 mm): 2600 mm - Length with control panel (with soft disc 3035 mm): 2985 mm - Width: 880 mm - Height: 1910 mm - Approx. weight: 3300 kg - Operating voltage: 400 V, 50 Hz, 3 phase - CE version ----- Price for the above-mentioned machine available upon request! ----- Optional accessories at extra cost: Workpiece air-blow cleaning - Arranged with nozzles above and below at the machine outfeed, pneumatically controlled Sanding belt air-blow cleaning (4-belt) - Arranged with nozzles directly at the radius of the tension rollers inside the extraction unit, timer-controlled on/off, each 5...