Krožni Brusilni Stroj nakup rabljenega (28.189)

Stanje: rabljeno, Leto izdelave: 1998, Funkcionalnost: nepreverjeno, številka stroja/vozila: 2183, potovalna razdalja osi X: 500 mm, pomik osi Y: 300 mm, pomik po osi Z: 450 mm, največja hitrost vretena: 60.000 obr/min, model krmilnika: GE Fanuc Series 16-M, Pas de prix de réserve – vente garantie à la meilleure offre ! DÉTAILS TECHNIQUES Course axe X : 500 mm Course axe Y : 300 mm Course axe Z : 450 mm Vitesse de broche max. : 60 000 tr/min Vitesse de broche min. : 9 000 tr/min Avance axe X : 2 000 mm/min Avance axe Y : 2 000 mm/min Avance axe Z : 900 mm/min Plage de vitesse de levée : 0,5 – 14 000 mm/min (en continu) Dimensions de la table : 600 x 380 mm Charge maxi sur la table : 300 kg Porte-outil : pinces EX 19, arbres de meulage E19 DÉTAILS DE LA MACHINE Dodpfx Asyl U Nvsg Heki Modèle de commande : GE Fanuc Série 16-M Tension d’alimentation : 400 V Tension de commande : 24 V Puissance absorbée : 7 500 W Fréquence d'entrée : 50 Hz Dimensions & Poids Dimensions (L x l x H) : 4 250 x 4 000 x 3 250 mm Poids total : 4 500 kg ÉQUIPEMENTS Documentation / manuel Installation d’aspiration Système de refroidissement Turbine d’étanchéité

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Working width: 1,100 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,120 x 1,900 mm Dkedpfxsychqzj Ag Hei Variable feed speed: 2.6 – 13 m/min Feed motor power: 1.10 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 1,705 x 1,545 x 1,905 mm 1st Unit: Steel contact roller, Ø 160 mm Motor power: 15 kW, 400 V, 50 Hz 2nd Unit: Combination unit, rubber-coated contact roller (Sh 65), fixed sanding pad Motor power: 11 kW, 400 V, 50 Hz Abrasive belt cleaning by compressed air 3rd Unit: Cleaning brush Multifunction display Multifunction lever (conveyor belt, workpiece thickness adjustment) Electronic abrasive belt oscillation Pneumatic oscillation of conveyor belt Motorised workpiece thickness adjustment with LED display in 0.1 mm steps Units with emergency brake device Emergency stop button at infeed & outfeed Motor protection switch Roller table extension at infeed with 2 idler rollers Automatic star-delta starting Complete documentation Note for used machines: • Technical data subject to change and prior sale. • Prices quoted are ex-works and refer to collection only – loaded free of charge! • The machines have been cleaned and function tested. • All machines are sold as seen, without any warranty whatsoever. The buyer is welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Enquiries will only be answered if you provide your address and telephone number!)

Stanje: zelo dobro (rabljeno), Working width: 1360 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,360 x 1,900 mm Variable feed speed: 7 - 14 m/min Djdpeych Igjfx Ag Hjki Feed motor power: 1.1 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 2160 x 2260 x 2025 mm Weight: approx. 2200 kg 1st unit: Steel contact roller Motor power: 15 kW, 400 V, 50 Hz 2nd unit: Sanding pad, rigid for fine sanding of solid wood & pneumatically timed sanding pad for veneer 3rd unit: Cleaning brush Abrasive belt oscillation with limit switch Conveyor belt oscillation, pneumatic Motorised thickness adjustment with LED display Units with emergency brake system Emergency stop button at infeed Roller table extension at infeed Complete documentation Note on used machines: • Technical details and prior sale subject to change. • Prices quoted ex site – loaded free of charge! • The machine has been cleaned and tested for functionality. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to enquiries with your address and telephone number!)

Stanje: dober (rabljeno), Leto izdelave: 1992, Single-piece sanding machine Sanding from above & below Electric height adjustment with digital display Infinitely variable feed speed Star/delta start Pneumatic belt tensioning Main switch Sanding belt oscillation Finish brushing unit above and below, manual height adjustment Dedpfowyda Uox Ag Hjki Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Including infeed and outfeed roller conveyor, L = 1600 mm, non-driven Note on used machines: • Subject to technical changes and prior sale. • Stated prices are ex-works – free loading at location! • The machines have been cleaned and function tested. • All machines are sold as seen, with no warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements are only valid if made in writing. (Inquiries will only be answered with your address and telephone number!)

Stanje: rabljeno, Kündig Topiq-1100 Dkodeyngxhepfx Ag Hji Švicarski kakovostni izdelek STROJ S KONSTANTNO MIZO / avtomatska nastavitev glave Širokopasovni kalibracijsko-finiš brusilni avtomat Kombinirani agregat kontaktni valj in brusna blazinica z elektronsko krmiljenim segmentnim brusnim čevljem Moč pogonskega motorja traku cca 11 kW Nivo kontaktnega valja brezstopenjsko nastavljiv glede na skalo zrn Delovna širina 1100 mm Podajalna hitrost 3 - 15 m/min, brezstopenjsko nastavljiva Avtomatika nastavitve debeline obdelovanca ENORMATIC hitra nastavitev Izbira programa preko upravljanja SmartSelect Stroj je DELAVNIŠKO PRENOVLJEN v ZELO DOBREM STANJU Na zalogi Lieboch

Stanje: rabljeno, Viet Target 211 A Širokopasovni brusilni stroj 1. agregat: valjčni agregat 2. agregat: brusilni čevelj Delovna širina: 1100 mm Delovna višina: 4–160 mm 2 hitrostni pomika Glavni motor: 11 kW Dodatna valjčna miza pri vhodu in izhodu Leto izdelave: 1995 Stroj je FUNKCIONALEN in v DOBREM STANJU Dodpfx Aoym T Igeg Hoki Na lokaciji

Stanje: rabljeno, Leto izdelave: 2005, Number of belts: 2-belt Max. pass-through height: 150 mm Max. working width: 1350 mm 1st unit: combined sanding unit Design of 1st unit: steel contact roller Pad 1st unit: segmented electronic pad, 35 mm Abrasive belt length 1st unit: 1900 mm Abrasive belt width 1st unit: 1370 mm Abrasive belt speed 1st unit: 18 m/sec 2nd unit: combined sanding unit Djdpfx Asyhnvujg Heki Design of 2nd unit: rubber-coated contact roller, 65° Shore Pad 2nd unit: segmented electronic pad, 35 mm Abrasive belt length 2nd unit: 1900 mm Abrasive belt width 2nd unit: 1370 mm Abrasive belt speed 2nd unit: variable, 2 - 18 m/sec Belt air-blast device: for 2nd unit Cleaning brushes: yes Suitable for lacquer sanding: yes Vacuum conveyor belt: yes Feed speed: infinitely variable from 2.5 - 13 m/min Control: touch screen Electro-pneumatic belt oscillation: yes Infeed height: fixed (upper section adjustable) Table height display: digital Working/table height: 900 mm Motor power: 36 kW Location: supplier

Stanje: novo, Leto izdelave: 2022, Bandwidth: 150 mm Belt length: 3000 mm Table size: 960 mm x 352 mm Auxiliary table: 330 mm x 330 mm Veneer sanding attachment: yes Oscillation: yes Tilting sanding unit: yes Extraction connection: 120 mm Motor power: 3 kW Machine length: 1900 mm Dksdsgr Ufhopfx Ag Hji Machine width: 810 mm Weight: 290 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Band width: 150 mm Belt length: 2170 mm Table size: 1440 mm x 710 mm Veneer sanding unit: yes Oscillation: yes Tilting table: yes, 0°–45° Dkodjhpmahjpfx Ag Hei Extraction connection: 120 mm Motor power: 3 kW Machine length: 1440 mm Machine width: 800 mm Weight: 530 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Band width: 150 mm Band length: 2400 mm Veneer sanding unit: no Oscillation: yes Roller diameter: mm Sanding unit tiltable: yes / 90° - 0° Worktable: 730 x 300 mm Auxiliary table: 420 x 400 mm Belt speed: 14 m/sec Extraction connection: 120 mm Motor power: 1.8 kW / 400 V Machine length: 1480 mm Machine width: 680 mm Dksdpfx Aehpmadjg Hoi Weight: 160 kg

Stanje: novo, Leto izdelave: 2022, Belt width: 150 mm Belt length: 2740 mm Veneer sanding unit: no Oscillation: yes Roller diameter: 115 mm Sanding unit tiltable: yes / 90° - 0° Worktable: 900 x 305 mm Auxiliary table: 290 x 260 mm Belt speed: 16 m/sec Extraction port: 100 mm Motor power: 3 kW / 400 V Machine length: 1540 mm Machine width: 750 mm Dedpfx Aohq A H Deg Heki Weight: 220 kg

Stanje: novo, Leto izdelave: 2022, Band width: 150 mm Band length: 3000 mm Table size: 960 mm x 352 mm Dkedpegtdpuofx Ag Hei Auxiliary table: 330 mm x 330 mm Sanding drum diameter: 60 mm / 100 mm / 120 mm Veneer sanding device: yes Oscillation: yes Tilting sanding unit: yes Extraction connection: 120 mm Motor power: 3 kW Machine length: 1900 mm Machine width: 900 mm Weight: 310 kg

Stanje: zelo dobro (rabljeno), !!!DEMONSTRACIJSKI STROJ!!! Naprodaj je skoraj nov brusilni stroj JET DDS-237 z največjo širino brušenja 940 mm. Stroj je v zelo dobrem stanju, obnovljen in preverjen s strani našega strokovnega osebja. (Popolnoma funkcionalen) Tehnični podatki: -Dvojvaljni brusilni stroj JET DDS-237 -Motor 400 V / 7,5 KM -Hitrost brusilnega valja 1.400 min⁻¹ -Hitrost podajanja 3 m/min -Maks. širina brušenja 940 mm -Debelina brušenja 0,8 do 133 mm -Minimalna dolžina obdelovanca 230 mm -Brusilni valj vsak 152 x 940 mm -Širina brusnega traku 75 mm ali 100 mm Dkjdpox Sqzvsfx Ag Hei -Odvodna priključka 2 x premer 100 mm -Dimenzije (D x Š x V): 1.090 x 1.420 x 1.090 mm -Teža 440 kg Stroj se nahaja v A-8561 Söding in je na voljo za ogled in prevzem kadar koli v skladu z našim delovnim časom. Možnost predhodne prodaje! Sorodni izrazi: stebrni vrtalnik, namizni vrtalni stroj, sveder Referenca: R-D1618

Stanje: rabljeno, Rabljeni stroj Leto izdelave: 1987 Oprema in tehnični podatki: - Pnevmatska brusilna enota - Hitromenjalni brusilni čevelj - Velikost mize 2800 x 1250 mm - Maks. uporabna brusna dolžina med stebri stroja 2600 mm - Brusna širina pri prečnem gibanju mize 1000 mm Dodpeyq T H Defx Ag Hski - Prehod pod trakom, električna nastavitev višine mize 340 mm - Motor 5,5 kW - Izmenični stikalo za levi/desni tek traku - Hitrost traku 22 m/s - Dimenzije traku 7800 x 150 mm - Odsesavanje na levem delu stroja 1,1 kW, pretok zraka 1800 m³/h - Priključek za odsesavanje 180 mm Potrebni prostor 3950 x 2300 mm Teža 900 kg Razpoložljivost: kratkoročno Lokacija: 63934 Röllbach

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1989, dolžina brusnega traku: 2.600 mm, širina brusilnega traku: 150 mm, potrebna širina: 900 mm, zahteva za prostor dolžina: 1.650 mm, Langzauner LZK 3/2 Edge Sanding Machine Motor power: 2.2 kW Belt dimensions: 2600 x 150 mm Belt speed: 20 m/sec Dkodpfx Aorgpw Aog Hei Table dimensions: 1000 x 350 mm Height adjustment: 200 mm Weight: 300 kg Required space: 1650 x 900 mm Sanding unit can be swiveled 45° Veneer sanding attachment Oscillation Feed console Year of manufacture: 1989 Condition: fully functional

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Automatic calibrating wide belt sander suitable for calibration and sanding of solid wood. This model belongs to the higher range of automatic wide belt sanders from this Italian manufacturer. It stands out in particular for its very robust and rigid machine frame and excellent sanding quality. The constant table height allows the sander to be used in production lines. 2 main units: roller + roller 1st sanding roller, soft rubber Ø 240 x 440 mm - 9 kW motor 2nd calibration roller, hard rubber Ø 240 x 440 mm - 4.8 - 7.2 kW motor 3rd cleaning brush at the outfeed + rotary pneumatic part blower Sanding width: 350 mm Minimum and maximum workpiece thickness: 3 to 180 mm Minimum workpiece length: 340 mm Feed speed variator Digital LCD thickness display with motorized adjustment Fine adjustment by hand wheel Ammeter for monitoring motor load Pneumatic belt blow-off with oscillation Abrasive belt dimensions: 2620 x 380 mm Pneumatic disconnection of sanding units Dksdpfx Aoyr Rpleg Hei External control panel Fixed working height / table - entire unit lift Price: €6,200 (excl. VAT) - as is, without refurbishment Price: €8,200 (excl. VAT) - fully refurbished (including new feed belt) Stock and readiness of the machine for pick-up must be verified in advance! In stock: Telnice near Brno 6-month warranty – warranty and post-warranty service Test run, live demonstration and operator training included as standard.

Stanje: novo, Number of sanding units: 2 pcs. Sanding width: 290 mm Maximum sanding height: 180 mm LÖWER DoubleSander Solid DSM 3000 ----- Double-sided single workpiece sander for sanding solid wood, such as window scantlings and similar items. Robust premium model featuring long cast iron tables, integrated brushing and finishing stations, and conveyor belt feed. Suitable for continuous heavy-duty work, even with higher material removal rates. - Offset arrangement of top and bottom sanding and finishing units - Direct-driven, rubber-coated sanding rollers for slip-free power transmission - Combination sanding over roller and pad for high stock removal and a consistently flat sanding area - Maintenance- and wear-free CERMET-coated sanding pads with excellent thermal conductivity and absolute dimensional stability - External cooling of sanding zones for cooler sanding and increased abrasive belt life - Forced, pneumatically-controlled belt oscillation - Effective sanding dust extraction directly at the sanding rollers - Fine dust extraction at tension rollers - Integrated brushing and finishing unit with large sanding dust extractor - Motorized sanding thickness adjustment via precision leadscrews and large linear ball bearing sets on hardened and ground precision shafts, with dust and dirt protection - Stock removal adjustment (bottom) via precision leadscrew with scale ring measurement display (resolution 0.1mm) - Abrasive belt tension with pneumatic cylinder for constant clamping pressure - Abrasive belt change with pneumatic release in seconds - Adjustable belt tracking for belt change - Electro-pneumatic compressed air monitoring - Workpiece infeed safety via contact roller for oversized workpieces - Workpiece transport via calibrated, non-slip, high-traction conveyor belts over heavy-duty 1000 mm-long cast iron tables with superfine planed surfaces and spring-loaded, finely adjustable pressure rollers - Cardan shaft drive for jerk-free, uniform workpiece transport Dkodjyrty Tspfx Ag Hsi - Feed gear motor with stepless adjustment for quick adaptation to various wood types - All motors electrically protected - Ergonomically arranged controls at workpiece infeed side - Digital thickness display (0.1mm resolution) with modern magnetic band system Technical Data: - Sanding belt speed: 22 m/s - Sanding belt length: 1,800 mm - Sanding belt width: 300 mm - Working width: 290 mm - Sanding thickness: 2–180 mm - Two brake motors for main drive: 7.5 kW - Feed motor: 1.0 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units, each 0.37 kW, with fibre brushes D 120 x 300 mm - Extraction ports: 2 x 120 mm and 2 x 150 mm - Pneumatic connection: 6 bar - Working height: 850 mm - Length: 2,105 mm (w/o control panel) - Length with control panel: 2,490 mm - Width: 980 mm - Height: 1,910 mm - Weight: approx. 1,650 kg - Operating voltage: 400 V, 50 Hz, 3-phase - CE compliant ----- Price for the above-mentioned machine on request! ----- Optional accessories at extra charge: Workpiece air blow-off - Air nozzles positioned above and below at the machine outfeed, pneumatically controlled Abrasive belt blow-off - Through nozzles positioned directly at the radius of the tension rollers within the extraction system, timer controlled, 5 seconds on/off, can be activated separately Disc unit ...

Stanje: novo, Number of sanding units: 4 pcs Sanding width: 190 mm Maximum sanding height: 2 - 180 mm LÖWER - DoubleMaster DSM 2000 DB ----- Double-sided single-piece wood sanding machine with additional cross brushing sanding unit (discs) and longitudinal brushing sanding unit (roller) for sanding solid wood such as window profiles, etc. Robust top-quality construction with long cast iron tables and conveyor belt feed. Suitable for heavy-duty continuous operation, even with higher material removal rates. 1. Belt sanding unit with CERMET shoe for pre-sanding 2. Disc unit for cross-grain sanding / defibering 3. Roller unit for longitudinal sanding to achieve a directed finish along the grain - Offset arrangement of sanding and finishing aggregates above and below - Direct-drive rubber-coated sanding rollers for slip-free power transmission - Combined sanding via roller and shoe for heavy material removal with consistently flat engagement zone - Maintenance-free and wear-free CERMET-coated sanding shoes with excellent thermal conductivity and absolute dimensional accuracy - External cooling of sanding zones for cooler sanding and longer belt service life - Forced pneumatic oscillation control for sanding belts - Effective dust extraction directly at the sanding rollers - Fine dust extraction at tensioning rollers - Integrated brushing sanding device (cross and longitudinal) with dust extraction - Motorized sanding thickness adjustment via precision lead screws and oversized linear ball bearing assemblies on hardened and ground precision shafts with dust and dirt protection - Material removal setting on the bottom via precision lead screw with scale ring display (resolution 0.1 mm) - Sanding belt tensioning via pneumatic cylinder with constant tension pressure - Belt exchange with pneumatic belt release within seconds - Adjustable sanding belt tracking during belt change - Electro-pneumatic compressed air monitoring - Infeed safety via contact roller for overthick workpieces - Workpiece transport on calibrated, slip-resistant, high-friction conveyor belts over heavy-duty 1000 mm long cast iron tables with finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for jerk-free and uniform workpiece transport - Feed gear motor infinitely variable for quick adaptation to different types of wood - All motors electrically protected - Ergonomically arranged controls at the infeed side - Digital thickness display (resolution 0.1 mm) utilizing advanced magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800 mm - Sanding belt width: 200 mm Dedpfxeyrty He Ag Hski - Working width: 190 mm - Sanding thickness: 2-180 mm - Two brake motors for drive: 5.5 kW - Feed motor: 1.0 kW - Feed speed: 4-20 m/min - Automatic height adjustment: 0.37 kW - Brush sanding units: Disc, max. diameter: 200 mm Roller, max. diameter: 270 mm - Extraction ports: 2 x 120 mm and 2 x 180 mm - Pneumatic connection: 6 bar - Working height: 870 mm Dimensions: - Length: 2600 mm - Length with rollers: 2985 mm - Width: 880 mm - Height: 1910 mm - Weight: approx. 1500 kg - Operating voltage: 400 Volt, 50 Hz, 3-phase - CE compliant ----- Price for the above-mentioned machine available upon request! ----- Optional accessories at extra cost: Workpiece air blow-off - medium...

Stanje: rabljeno, 1 kos zunanje cilindrične brusilke CRESTA 508 skladno s slikami in ogledom, na paleti Barva: zelena Stanje: rabljeno Mesto skladiščenja blaga: proizvodna hala / levo Način plačila: predplačilo z bančnim nakazilom Dostava: samo osebni prevzem – dostava za ta artikel ni možna! Dsdpfxjyr H Uwj Ag Heki

Stanje: rabljeno, 1 kos preciznega brusilnega stroja FRIEDRICH DECKEL 2025-1295 z digitalnim prikazovalnikom HEIDENHAIN, skladno s slikami in ogledom Barva: zelena Stanje: rabljeno Dsdpfx Agsyr H Iqo Hoki Lokacija blaga: proizvodna hala / desno Način plačila: predplačilo z bančnim nakazilom Dostava: samo osebni prevzem – Dostava za to postavko ni možna!

Leto izdelave: 2018, stanje: pripravljen za uporabo (rabljen), Ta valjčna brusilnica MORARA REU 800 je bila izdelana leta 2018. Ima višino med središči 255 mm, največjo dolžino brušenja 600 mm ter razdaljo med središči 700 mm. Opremljena je s CNC krmiljenjem Siemens PLC in merilnim sistemom Marposs, prenovljena in skladna s CE. Trenutno je pod napajanjem in ogled je možen. Kontaktirajte nas za dodatne informacije o stroju. Vrste uporabe Brušenje Dksdpfxox D Dt Tj Ag Hoi

Leto izdelave: 2021, obratovalne ure: 3.008 h, stanje: pripravljen za uporabo (rabljen), Splošni podatki Teža stroja: 6500 kg Višina: 1900 mm Globina: 2200 mm Dimenzije Dolžina stroja: 4400 mm Premiki Premik X-osi: 260 mm Premik Z-osi: 1115 mm Ta 3-osni valjčni brusilni stroj QGrind QGRIND U1000 je bil izdelan leta 2021. Ima največji premer obdelovanca 450 mm, razdaljo med konicama 1000 mm in brusno dolžino 800 mm. Opremljen je z upravljalno enoto Fanuc 0i-TF in 15" zaslonom na dotik, kar omogoča natančen nadzor in enostavno uporabo. Izkoristite priložnost za nakup tega valjčnega brusilnega stroja QGrind QGRIND U1000. Za več informacij nas kontaktirajte. Dkodpjx D Dvujfx Ag Hoi Vrste uporabe Brušenje

Stanje: rabljeno, BIESSE SAND REGAL 1350 je industrijski širokotrak brusilni stroj, namenjen za kalibracijo in fino brušenje ploščatih kosov v pohištveni in ploščni industriji. Serija REGAL predstavlja robustno proizvodno rešitev, primerno za srednje in velike proizvodne obsege. Stroj je zasnovan modularno in omogoča kombinacijo kalibracijskih ter končnih obdelovalnih operacij v enem prehodu, kar občutno poveča produktivnost. Dedpfx Agjynb Rfs Hoki

Stanje: rabljeno, Number of sanding units: 4 pcs Sanding width: 190 mm Max. sanding height: 4–180 mm Weight: 4200 kg Hess Expert 4-Belt Single-Piece Wood Sander Ø Sanding from below and above Ø Each with 2 staggered sanding units (top and bottom) Ø Sanding units (top and bottom) connected in series according to the precision planing principle Ø Pre-sanding with coarse grit (calibration) Ø Fine sanding with fine grit (finish) Ø Central motorized height adjustment of the lower sanding units Ø Central motorized and synchronous height adjustment of the complete upper sanding and brushing units, including the upper transport units Ø Oscillating belt use (during the sanding process) Ø Absolute power transmission via 5.5 kW motors and large dimensioned drive drums Ø Oxide-ceramic sanding shoe for - precise surface geometry - no readjustment required - permanent dimensional accuracy - completely maintenance- and wear-free Basic structure: Stable, heavy welded construction made of thick-walled rectangular profiles with additional, statically calculated stiffeners for optimal vibration damping. Staggered sanding units with large-diameter belt drive drums for slip-free belt tracking. Dual-point extraction for direct and airborne dust with sealing brushes and integrated sanding belt air-blast device to extend belt service life. Sanding units in robust steel plate construction serve as the base for vibration-damped, smooth belt operation. Absolutely backlash-free guidance by ball-type linear sets made of hardened and ground shafts. Height adjustment of the sanding units via hardened and ground special linear guides and preloaded carriage units. Long-term precision is ensured by dust and dirt protection of the ball linear sets and carriage units. Large-diameter presanding rollers as contact drums. Contact drums and sanding shoes are balanced relative to the sanding belt grit stress. The oversized drive drums guarantee the full power transmission of the 5.5 kW sanding motors to the sanding belt, ensuring slip-free, stable running and optimal heat dissipation, allowing for maximum material removal. Automatic machine stop in the event of belt breakage. Optical display at the control panel and via signal light on the machine. Sanding shoes for finishing are entirely maintenance- and wear-free, made from oxide-ceramic with optimal heat dissipation. Belt tensioning is provided by appropriately sized compression springs. Belt release for belt change is done via a pneumatic unit for gentle and distortion-free installation of new belts. The upper sanding and brush units are centrally and motor-driven height adjustable, with digital display at the control panel for motorized sanding thickness adjustment. Brush and finishing device, for improved surface finish, is integrated into the base machine. Two vertically arranged special brush rollers, 150 mm Ø, run in the direction of feed. Separate height adjustment of the brush rollers on precision carriage guides allows adjustment for wear compensation. An additional transport roller is provided for ejecting or further transporting the workpiece from the sanding machine, linked to the conveyor belt. Dkodpfet Tqy Esx Ag Hji Wood guiding at the infeed area for hard, double-sided...

Leto izdelave: 2023, obratovalne ure: 4.976 h, stanje: pripravljen za uporabo (rabljen), Splošni podatki Mere širina: 3250 mm Mere globina: 2100 mm Mere višina: 2150 mm Krmilna enota Znamka: FANUC Model: 31i-B Glavni pogon Število osi: 4 Pomik Pomik po X-osi: 370 mm Pomik po Z-osi: 800 mm Obdelovanec Teža obdelovanca: 150 kg Dodatna oprema Opremljen z: merilna tipala, protipožarna napeljava Kraft & Bauer, ločevalnik oljne megle LTA, papirni filter DGS, hladilniki motorex/Ritter & bader, brusna kolesa, dokumentacija Ta 4-osni valjčni brusilni stroj STUDER S33 je bil izdelan leta 2023. Ima razdaljo med konicama 650 mm, višino med konicama 175 mm in največjo maso obdelovanca 150 kg. Opremljen je s krmilnim sistemom Fanuc 31i-B, merilno tipalo, protivpožarnim sistemom, ločevalnikom oljne megle in hladilniki. Izkoristite priložnost za nakup tega valjčnega brusilnega stroja STUDER S33. Za več informacij o stroju nas kontaktirajte. Vrsta uporabe Brušenje Dkedpfsx D Nfnjx Ag Hoi