Širokopasovni brusilnik

DMC US 1350 M2

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Working width: 1,100 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,120 x 1,900 mm Variable feed speed: 2.6 – 13 m/min Feed motor power: 1.10 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 1,705 x 1,545 x 1,905 mm 1st Unit: Steel contact roller, Ø 160 mm Motor power: 15 kW, 400 V, 50 Hz 2nd Unit: Combination unit, rubber-coated contact roller (Sh 65), fixed sanding pad Motor power: 11 kW, 400 V, 50 Hz Abrasive belt cleaning by compressed air 3rd Unit: Cleaning brush Multifunction display Multifunction lever (conveyor belt, workpiece thickness adjustment) Electronic abrasive belt oscillation Pneumatic oscillation of conveyor belt Motorised workpiece thickness adjustment with LED display in 0.1 mm steps Units with emergency brake device Emergency stop button at infeed & outfeed Djdpfx Aoychqzoplsut Motor protection switch Roller table extension at infeed with 2 idler rollers Automatic star-delta starting Complete documentation Note for used machines: • Technical data subject to change and prior sale. • Prices quoted are ex-works and refer to collection only – loaded free of charge! • The machines have been cleaned and function tested. • All machines are sold as seen, without any warranty whatsoever. The buyer is welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Enquiries will only be answered if you provide your address and telephone number!)

Stanje: rabljeno, Leto izdelave: 2001, Abrasive belt length 1st unit: 2150 mm Max. working width: 1300 mm Number of belts: 3-belt 1st unit: Cross belt version 1st unit cross belt pad: Electronic segmented pad Abrasive belt width 1st unit: 150 x 4800 mm Drive 1st unit: kW 2nd unit: Longitudinal roller 2nd unit version: Steel calibration roller Abrasive belt length 2nd unit: 2150 mm Abrasive belt width 2nd unit: 1350 mm Abrasive belt speed 2nd unit: 18 m/sec 3rd unit: Pad unit 3rd roller version: electronic segmented pressure beam SDS system Pad 3rd unit: electronic segmented pads, 32 mm width Abrasive belt length 3rd unit: 2150 mm Abrasive belt width 3rd unit: 1350 mm Dujdpexzi S Nsfx Aplst Suitable for lacquer sanding: Yes Belt blow-off: Yes Vacuum conveyor: Yes Feed speed, fixed: infinitely variable 5 - 15 m/min Control: screen control Electrical/pneumatic belt oscillation: electric Infeed height: variable (lower table travels) Table adjustment: electro-motorized Table display: digital Working height or feed table height: 880 mm Location: Nattheim

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, dolžina police 3500mm širina police 1300mm 8 hidravličnih cilindrov premer cilindrov 85mm Dusdpfeyxwzcox Aplot vgrajeno olje ogrevanje napajanje 380V

Leto izdelave: 2001, stanje: skoraj kot novo (rabljeno), Fladder brushing machine CMC Futura Bold x 2, 6 aggregates. UPWARDS WIDE AGGREGATE, DOWNWARDS WIDE AGGREGATE, LEFT AND RIGHT NARROW AGGREGATES x 4. Dujdpfx Apei A Ivyelot Working width 1200 mm, stepless feed speed adjustment via frequency inverters.

Stanje: zelo dobro (rabljeno), Working width: 1360 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,360 x 1,900 mm Variable feed speed: 7 - 14 m/min Feed motor power: 1.1 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 2160 x 2260 x 2025 mm Weight: approx. 2200 kg 1st unit: Steel contact roller Motor power: 15 kW, 400 V, 50 Hz 2nd unit: Sanding pad, rigid for fine sanding of solid wood & pneumatically timed sanding pad for veneer 3rd unit: Cleaning brush Abrasive belt oscillation with limit switch Conveyor belt oscillation, pneumatic Motorised thickness adjustment with LED display Units with emergency brake system Emergency stop button at infeed Roller table extension at infeed Complete documentation Duodpoych Igefx Apljt Note on used machines: • Technical details and prior sale subject to change. • Prices quoted ex site – loaded free of charge! • The machine has been cleaned and tested for functionality. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to enquiries with your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Top Finish Italmeccanica TOP FINISH 6T-2M brushing machine: brushing machine equipped with one horizontal shaft, two edge pins, and two rotary units. Duodpok Iu Hvsfx Apljt

Stanje: dober (rabljeno), Leto izdelave: 1990, 1x VROČA STISKALNICA ZA FURNIR “SORMEC” TIP 350X130 Hidravlična vroča stiskalnica za les, plošče, pohištvo, vrata, kompozite in različne materiale Tehnični podatki: Dimenzije plošče mm 3500 x 1300 Djdpfx Apjyv Izbolout 1 UPORABNA DELOVNA PLOŠČA Ogrevanje plošče z vročo vodo Skupni pritisk 50 ton Odpiranje mm 300 8 valjev, premer 85 mm Kotliček za vodo ni vključen Skupne dimenzije mm 4500 x 1600 x 2500 h Teža približno 5000 kg Rabljeno, v dobrem stanju.

Stanje: rabljeno, Delovna širina 1.350 mm Število brusnih agregatov 2 kos Maksimalna debelina obdelovanca 150 mm Večnamenski stroj za površinsko brušenje Heesemann tip MFA 6 Impression Q2 – LF za precizno brušenje površin, furnirja, laka ter za vmesno brušenje v lesni industriji. Stroj je primeren za masiven les, obložene obdelovance in občutljive površine pri izdelavi pohištva in notranji opremi. Brezstopenjsko nastavljiv podajalni transport ter vakuumska pritrditev omogočata čist in enakomeren brusni vzorec. Djdpfx Apjyyc Drslout Predvidena razpoložljivost od 33. tedna 2026.

Stanje: zelo dobro (rabljeno), Širokopasovni brusilni stroj VIET S1 213 Delovna širina: 1300 mm Delovna višina: 3-160 mm Dsdpfx Aoyddursplout Število agregatov: 2 Kalibracijski valj iz gume Kombiniran agregat s čeveljčkom Glavni motor: 15 kW (20 KM)

Stanje: rabljeno, The Volpato LS 1N is a universal machine designed for sanding edges, profiles, and shaped components made of wood and other materials. It combines user-friendly operation with high versatility – it can be equipped with a sanding belt, sanding disc, or milling unit. Its robust construction and high-quality Italian craftsmanship ensure a long service life and reliable performance even under demanding conditions. The machine features a chain feed with stepless speed adjustment from 4–20 m/min, pneumatic belt tensioning, and an oscillation system for uniform abrasive utilization. Precise adjustment of the pressure pad allows for both fine copying sanding and accurate calibration. Technical data Sanding belt Belt dimensions: 2450 × 80 mm Unit tilt: 0–135° Belt speed: 7–14 m/s (2 speeds) Motor: 1.5 kW Oscillation: 0–20 mm Extraction port: Ø 100 mm Net weight: approx. 100 kg Sanding disc Max. diameter: 220 mm Max. width: 90 mm Unit tilt: 0–180° Rotational speed: 900 rpm Motor: 1.5 kW Extraction port: Ø 100 mm Net weight: approx. 90 kg Milling unit (optional) Cutter diameter: 140–160 mm Unit tilt: 0–90° Rotational speed: 0–6000 rpm (with inverter) Motor: 4 kW Shaft diameter: 35 mm Extraction port: Ø 100 mm Net weight: approx. 90 kg Feed Type: chain, with rubber inserts Feed speed: 4–20 m/min (stepless adjustment) Dimensions and weight (model LS 1N) Length: 2450 mm Height: 1400 mm Depth: 1900 mm Duedpfx Ajxlquteplot