Brusilni stroji

COSTA LEVIGATRICI SN TR LFT 3 TT 1350

Stanje: dober (rabljeno), Leto izdelave: 1992, Single-piece sanding machine Sanding from above & below Electric height adjustment with digital display Infinitely variable feed speed Star/delta start Pneumatic belt tensioning Main switch Sanding belt oscillation Finish brushing unit above and below, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Iodewyda Ujpfx Alasat Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Including infeed and outfeed roller conveyor, L = 1600 mm, non-driven Note on used machines: • Subject to technical changes and prior sale. • Stated prices are ex-works – free loading at location! • The machines have been cleaned and function tested. • All machines are sold as seen, with no warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements are only valid if made in writing. (Inquiries will only be answered with your address and telephone number!)

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, širina brušenja: 1.300 mm, višina brušenja: 160 mm, vrsta nastavitve višine: električni, dolžina brusnega traku: 2.150 mm, Heesemann JSM 1350 RC Wide Belt Sander Year of manufacture: 2025, new machine, currently the only exhibition unit available in Europe! - Electric height adjustment via terminal: 3 - 160 mm - Infinitely variable feed speed: 3 - 12 m/min - Sanding units with separate motors and infinitely variable belt speeds up to 18 m/s - Table extensions at infeed and outfeed - Industrial PC 15.6" - Program memory for 100 programs - Remote maintenance - Contact roller unit with steel roller Belt dimensions: 2,150 x 1,370 mm Belt speeds: 18 m/s Drive power: 15 kW Diameter: 160 mm - Longitudinal sanding unit Belt dimensions: 2,150 x 1,370 mm Belt speeds: 18 m/s Iasdswcqr Aopfx Alajt Drive power: 15 kW Front calibration return roller Ø 160 mm, rubberized (65° Shore hardness), grooved - Energy Management System (EMS) - Doors with glass inserts - LED lighting inside the machine - Vacuum table prepared (bored) for connection of the vacuum blower - Vacuum blower (integrated in the machine) - Workpiece cleaning with oscillating air jet pipe - CSD (magnetic pressure beam) The machine is connected and can be inspected on site by appointment. If you have any questions, please do not hesitate to contact us.

Stanje: rabljeno, Leto izdelave: 2017, številka stroja/vozila: A1711012, Pos.1 VEN CLEAN Smart Dust Removal Unit Compressed air dust removal system for cleaning workpieces to be painted, removing dust from profiled workpiece surfaces. Five rotating air blast stars are installed. These detach the dust from the surface. The loosened dust is extracted on both sides by suction ducts. An external extraction system must be provided by the customer. Technical Specifications: Length: 2,060 mm Roller pitch: 85 mm Working width: 1,300 mm Total width: 1,800 mm Drive power: 0.25 kW Exhaust air volume: 4,000 m³/h (to be provided by the customer) Compressed air consumption: 980 Nl/min Ionization as jet rod (non-EX) with compressed air nozzles, compressed air consumption 840 NL/min Pos. 2 VEN SPRAY Comfort Automatic Spray Machine - Manufacturer: Venjakob Iaodou U Ryyepfx Alajt - Model: VEN SPRAY Comfort CNC 7000 - Year of construction: 2017 - Length: 4,350 mm - Working height approx. 930 mm ±20 mm - Working width: 1,300 mm - Operator side: left - Price refers to refurbished machine - Current condition: machine not refurbished - Dual gun drive - Dry extraction - Extraction nozzle diameter: 500 mm - Exhaust air capacity: 10,000 m³/h - Conveyor belt transport system - Continuously adjustable feed speed: approx. 2–6 m/min - With belt cleaning system featuring tungsten carbide scraper. Complete pre-equipment is available for subsequent installation of a second washer. - Gun control, Touch Screen CNC7000 - Installed color circuits: 1 pc. (optionally expandable) - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Length: 4,350 mm + (2,060 mm) - Width: 3,540 mm - Height: 2,600 + 440 mm - Free-standing control cabinet - Electrical connection: 23.33 kW / 63 A - Voltage, Hz: 400 / 50 - Color: RAL 7035 - Location: in stock - Voltage fluctuations max. +/- 5% _____ Optionally, we can also offer installation and commissioning of the system, as well as training for your staff. Upon request, we also offer regular maintenance and servicing of the machine. For further information, feel free to contact us!

Stanje: zelo dobro (rabljeno), Four-side planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor - 4 kW Fully adjustable heads Electrically adjustable height and width of planing Spindles: 40 mm Feed on cardan shafts, with stepless adjustment Iedpfx Aorigxyolaoat Solid planer from WEINIG Total machine length: 415 cm Machine tested, in original condition

Stanje: rabljeno, številka stroja/vozila: 006370, Type of applied edging: thin edge, thick edge Iajdpfx Ajl Txw Helajt Gluing system: EVA Joint milling: yes Multifunction unit: yes Top milling unit: yes Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Working units: 12 units

Stanje: dober (rabljeno), Clamping plate, scribing/marking plate, inspection plate, measuring table, welding table, aligning plate Iajdpfxsfc T Tqj Alast - Clamping plate is from a coordinate measuring machine - Width: 1335 mm - Length: 3000 mm - Height: 250 mm - Plate thickness: 40 mm - Plate features: with support ribs - With 4x leveling feet - Quantity: 1 piece available - Transport dimensions: 3000 x 1335 x H750 mm - Weight: 2,749 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, nice veneer saw with planing unit Iaedjq Rb Irepfx Alaot cutting length 3100 mm with rear stop

Leto izdelave: 2013, stanje: pripravljen za uporabo (rabljen), Connected load: 4 kW, weight: 1 t. Iasdpehlp Efsfx Alast

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2011, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, vrsta aktuacije: električni, vrsta laserja: CO₂ laser, laserska moč: 5.000 W, NAPRODAJ: TRUMPF TruLaser 3030 L20 (5000 W) – Visoko zmogljiva rešitev za lasersko rezanje Ponujamo visoko kakovosten, nemški stroj za lasersko rezanje TRUMPF TruLaser 3030 L20. Znano po zanesljivosti in preciznosti, je ta 5000 W zmogljiv stroj posebej primeren za obdelavo najrazličnejših debelin materialov z visoko učinkovitostjo. Vključuje prilagojene konfiguracije za proizvodnjo velikih serij. Tehnične specifikacije: Model: TruLaser 3030 L20 Moč: 5000 W Leto izdelave: 2011 Maks. velikost pločevine: 3000 x 1500 mm Iasdpeyluu Sefx Alajt Natančnost pozicioniranja: 0,03 mm/m Maks. hitrost pomika osi: 140 m/min Hitrost rezanja: 0,8–26 m/min Maksimalne zmogljivosti rezanja: Navadno jeklo: 25 mm Nerjavno jeklo: 20 mm Aluminij: 12 mm

Stanje: novo, Vacuum Lifter BARBARIC B3, Swivelling, incl. Crane - Demonstration Unit - Includes: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg For vertical and horizontal transport of flat, standard panels (coated panels, natural wood panels) up to a panel size of 3,000 x 2,100 mm - Tilt range of 90° with pneumatic tilting device - Complete unit with hoist and corresponding safety devices (vacuum gauge and hand slide valve with mechanical safety lock) - uniWood crossbeam with 2 suction pads Ø 270 mm on an adjustable traverse (Traverse length: 1,500 mm) Includes: - Option: Reinforced version BARBARIC uniWood for slightly porous panels Load capacity: 250 kg With 2 oval suction pads 500 x 250 mm on an adjustable traverse (Traverse length: 1,250 mm) and reinforced vacuum pump for porous panels. The reinforced version allows lifting of materials up to 250 kg. Includes: - Option: Comfort operation BARBARIC uniWood All controls for the hoist and vacuum lifter are integrated in a single control unit – our special handling grip. This enables operation of the system and load guidance in single-hand mode. The lifting process can be infinitely controlled via frequency converter. The comfort version is supplied complete with hoist and corresponding safety devices (vacuum gauge and 2-button safety release control). Ijdpju R Szaofx Alaoat Includes: - Column-mounted slewing crane BARBARIC Load capacity on the lifting device: 250 kg The indicated load capacity refers to the usable load on the lifting device. Barbaric slewing cranes are designed for handling tasks in all application areas and are extremely lightweight in construction. SSK consists of column, bracket, and smooth-running jib. Swivelling and trolley movement by hand. The prerequisite for installation is a proven concrete floor (C20/R5, min. 20 cm thick). Static verification of the floor must be carried out and documented by the customer. For fixing on cracked concrete or weak substrates, oversized base plates are available on request. Mounting: Supplied with adhesive anchors for concrete floors. If ordering without hoist, please specify the required cable or hose arrangement! Delivery includes: manual trolley, energy supply, and compressed air connection. - New demonstration machine -