Širokopasovni brusilni stroj Costa SA TS 1350

Costa SA TS 1350

Leto izdelave: 2001, stanje: dober (rabljeno), I am selling a wide belt sander Costa SA2 TS 1350, year of manufacture 2001. Configuration: Electronic segmented pad – brush head. Working width: 1350 mm. Bedpfx Agjg Trufs Eodd Abrasive belt dimensions: 1380 x 2620 mm. Pressure rollers for short workpieces. Compressed air cleaning for both units. Total weight: 2,600 kg. Main motor: 11 kW. Final cleaning unit with extraction. Including documentation. Condition: good. Available immediately.

Stanje: rabljeno, številka stroja/vozila: 008027, Maks. obdelovalna širina: 1350 mm Min. obdelovalna debelina: 200 mm Bdedpjwvq E Ajfx Ag Eod Delovna miza: fiksna višina Podtlakovni trak: da Število delovnih agregatov: 4 kos

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, vrsta upravljanja: CNC krmiljenje, vrsta laserja: vlakenski laser, laserska moč: 3.000 W, Oprema: CE označba, centralizirani mazalni sistem, dokumentacija / priročnik, hladilna enota, menjalnik šob, nujno zaustavitev, odsesavanje hlapov, odsesavanje prahu, varnostna svetlobna zapora, Typ: Dva sklíčidla Funkce drážky: Standardní Výkonové rozpětí: 3 kW, 6 kW Rozsah zpracování kruhových trubek: 10 mm ~ 160 mm Rozsah zpracování čtvercových trubek: 10 mm ~ 160 mm Maximální otáčky sklíčidla: 130 ot/min Hmotnost stroje: 3 t Napájecí specifikace: 380 V AC, 50 Hz Volitelný podavač: G16pro – automatické nakládání, G16pro – poloautomatické nakládání Volitelný vykladač: servopoháněný vykladač, pneumatický vykladač Standard: Bdsdpfowwz Dlox Ag Eod Systém 3000DE-DH, včetně optimalizace rozřezávání (nestingu), podpora servopohonů, pracho-těsnění (osa Y), pracho-těsnění (osa X), pracho-těsnění (osa Z), zadní duté odsávání karet, krátký odpadní materiál Volitelné: bezpečnostní oplocení (světelná závora), sklo s ochranou proti záření

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), Window production line WEINIG Bjdpfx Ash H Iyxeg Eedd consisting of: Machining center Unirex 3000 Univar 15 Unitex 15

Stanje: delavnici obnovljeno (rabljeno), Tenoning spindle 1 pc Number of milling units: 4 pcs Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 10 CNC – spindles CNC controlled radially and axially ---- The machine was factory-refurbished by Weinig in 2024. As part of this, the control system was replaced with a Siemens S7 677 C, including a new “Touch” membrane panel. With the following machining units: Crosscut saw ---- with laser guide light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 rpm axial adjustment via NC axis radial adjustment pneumatic, 8 positions for top edge rounding Bottom-mounted unit for edge rounding ---- axial adjustment shared with crosscut saw Haunching and tenoning spindle ---- motor power 15 kW spindle diameter 50 mm spindle speed 2,925 rpm min. tool cutting circle 380 mm, max. 400 mm tool clamping length 640 mm axial adjustment via CNC axis axial traverse path 580 mm adjustment speed 100 mm/sec. 1st profile spindle (climb and conventional milling) ---- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis 2nd profile spindle ---- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis Horizontal profile milling unit, top ---- motor power 3 kW spindle diameter 40 mm spindle speed 9,000 rpm pneumatic adjustment in 8 axial and radial positions Vertical profile milling unit, right, at machine outfeed ---- motor power 3 kW spindle diameter 40 mm spindle speed 5,850 rpm pneumatic adjustment in 8 axial and radial positions Additional accessories ---- CNC-controlled length stop, mounted on the tenoning table for lengths up to 3,500 mm, including crosscut saw integrated into the control system. Studio window facility, swivelling ±60° Double workpiece package with automatic separation and transfer Climb milling facility with window automation for rabbetting Rabbetting carriage for small sash widths Bedexpi Dujpfx Ag Eedd Climate control unit in electrical cabinet PC control NEXUS Automatic turning system Lamella conveyor including return belt for return of workpieces to the operator (specifications as per manufacturer's information – subject to confirmation).

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, širina brušenja: 650 mm, Oprema: Na voljo je tipska ploščica, Kündig Botop, sanding unit above: roller, pneumatically-operated pad; sanding unit below: roller, pneumatically-operated pad. The machine has been completely overhauled: new conveyor belt and new rollers. Bdedpfsvmt D Rex Ag Eod

Stanje: nepreverjeno (rabljeno), Slot spindle 2 pcs. Number of milling units: 7 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 12 with radial and axial NC spindles, VARIO table, and trimming carriage ..... Machine professionally dismantled and stored at our warehouse in 73447 Oberkochen. Video and photos were taken before dismantling. Technical data summary (additional accessories possibly included, please inquire) ..... Crosscut saw ..... > Electronic crosscut saw, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.7 kW > Laser alignment light for identifying saw cuts > Axial adjustment range: 150 mm NC axis, electronically infinitely adjustable > Radial adjustment range: pneumatically controlled, 8 positions for e.g., edge rounding from above Rounding unit ..... > Position: horizontal bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Max. tool diameter: 130 mm > Axial adjustment mechanically linked with crosscut saw. > Radial adjustment: pneumatically operated on/off Electronic length stop ..... > Length: 4,500 mm 1st Tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment: 580 mm NC axis, infinitely adjustable > Spindle speed: 2,800 rpm > Max. tool diameter: 400 mm > Counter-support: the entire clamping length is counter-supported 2nd Tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment: 580 mm NC axis, infinitely adjustable > Spindle speed: 2,800 rpm > Max. tool diameter: 400 mm > Counter-support: the entire clamping length is counter-supported Transfer belt ..... For transferring parts to the longitudinal machining section, including part separation for doubles infeed to the longitudinal machining. 1st Profiling spindle (climb and counter rotation) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment: 350 mm NC axis, infinitely adjustable > Radial adjustment: 80 mm NC axis, infinitely adjustable > Spindle speed: 6,000 rpm > Min. tool cutting circle: 140 mm > Max. tool cutting circle: 232 mm > 2 feed rollers opposite to spindle, axially pneumatically controlled, 8 positions > Table plate pneumatically controlled according to tool diameter Bdjdpfx Aox H Al Nog Ejd 2nd Profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment: 350 mm NC axis, infinitely adjustable > Radial adjustment: 80 mm NC axis, infinitely adjustable > Spindle speed: 6,000 rpm ...

Stanje: zelo dobro (rabljeno), Calibrating and Sanding Machine DMC Topsand 2000 4 Belts First Unit: 1 Roller Second Unit: 1 Roller Third Unit: 1 electronically segmented pad Bdsdsi Dakropfx Ag Esd Fourth Unit: 1 electronically segmented super-finishing pad Working width: 1350 mm Vacuum conveyor system

Stanje: rabljeno, Leto izdelave: 2004, številka stroja/vozila: SA/005006, WIDE BELT SANDER/THICKNESSER WITH 3 BELTS DMC MOD. USK1350 M3 - CE COMPLIANT - USED - 1 steel roller - 2 rubber rollers - 3 rubber rollers - 3 independent motors - Working width: 1350 mm - Equipped with pad system (short piece device) - Air blower on the third unit - On/off device on each sanding unit - Touch screen control - Serial no. SA/005006 - Year: 2004 Bdodpfewrnmpjx Ag Eed - CE compliant

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, skupna dolžina: 4.400 mm, delovna širina: 1.400 mm, vrsta nastavitve višine: električni, vhodna frekvenca: 50 Hz, vhodna napetost: 400 V, Good day, Bdedeu Hlzfopfx Ag Ejd We are offering for sale a Heesemann LSM 8 wide belt sander configured with four sanding units: - Cross-belt unit - Longitudinal unit with calibration roller - Longitudinal unit with reverse function - Longitudinal unit with cleaning brush The machine has undergone mechanical refurbishment and inspection, is tested, calibrated, and ready for operation. Year of manufacture: 1997 Feed speed: 5–25 m/min, infinitely variable adjustment from the control panel Working height: 880 mm Workpiece thickness: 3–80 mm Power requirement: 107 kW – under full load Total weight: 10,250 kg Control: physical button panel with display Control and abrasive belt change side: right Single perforated conveyor belts, perforated table with channel and vacuum fan for secure transport of short workpieces. Workpiece hold-down: rubber rollers, diameter 70 mm. Abrasive belt Q unit: 5400 mm x 150 mm Motor power: 13/17 kW – two-speed motor – belt speed: 12 m/s / 24 m/s "Sergeant" belt: 4850 mm x 141 mm Longitudinal belts L unit: 2620 mm x 1450 mm Motor power: 16.5 kW / 21 kW – two-speed motors – 10 m/s / 20 m/s Hold-down system: Pressurizing beams with computer-controlled, selective pressure adjustment – CSD® system with smooth, individual pressure adaptation for multi-row loading. Distance between control reading rollers: 16 mm. Abrasive belts are equipped with a cleaning system – compressed air blow-off and dust extraction. Tolerance alignment of workpieces up to 2 mm by maintenance-free electromagnetic pressure pads. Working width, as well as start and end of sanding beam, are electronically controlled. Abrasive belt cleaning by blow tubes, dust extraction via integrated extraction ducts, blow-off activation is automatic upon workpiece detection in the machine. At the end, a 150 mm cleaning/de-dusting brush with extraction duct for dust removal. Additional blow-off rotors at the machine outfeed with extraction duct. Commissioning at the new site and basic operator training – negotiable. Price negotiable upon request. The machine is available immediately.