Vodoravne tračne žage – polavtomatske – okroglo območje rezanja 0–300 mm nakup rabljenega (103)

Stanje: novo, Cutting diameter: 220 mm Saw blade length: 2450 x 27 x 0.9 mm Table height: 915 mm Pgsdofgyh Nepfx Adyjg Blade speed: 35 + 70 m/min Connection voltage: 400 V Cutting capacity at 90 degrees: round 220 mm Cutting capacity at 90 degrees: square 210 x 210 mm Cutting capacity at 90 degrees: flat 230 x 185 mm Total power requirement: 1.2 kW Machine weight: approx. 240 kg Space requirements: approx. 870 x 1550 x 1740 mm The Zimmer Z241/R is a self-lowering saw designed for mitre cuts from 0° to 60° to the left. After the cut is completed, the machine stops automatically via a safety limit switch. The lowering speed is infinitely adjustable via a hydraulic system. Raising the saw arm after the cut can be set to any desired position; the saw arm will remain at the selected position. The Z241/R comes equipped with: - Hydraulic cylinder - Coolant pump - Eccentric vice - Machine base - Saw blade - 400V plug (16A) The machine is delivered fully assembled and ready for immediate operation.

Stanje: novo, Cutting capacity at 90°: round 255 mm Cutting capacity at 90°: square 240 mm Cutting capacity at 90°: rectangular 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 950 mm Band speed: 18 - 110 m/min Total power requirement: 1.5 kW Machine weight approx. 0.42 t Space requirement approx. 1.23 x 1.7 x 1.75 m SPECIAL PRICE!!! Double mitre metal band saw, frequency inverter, hydraulic semi-automatic GBS 250 Super HA-I Easy • Mitre cuts left 60° / right 45° • Material height sensor (automatic cut start detection) • One-piece cast frame and gearbox, extremely quiet and low-vibration operation • Hydraulically movable vice • Guided, high-quality industrial bearings • Heavy-duty vice & machine casting Pedefgyh Uopfx Adyogg • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Adjustable feed pressure regulator • Infeed support roller • Ball-bearing turntable Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to material or, for series cutting, direct cutting 4. Saw blade stops 5. Raise frame just above the material 6. Open vice

Stanje: novo, Cutting capacity at 90° (round): 350 mm Cutting capacity at 90° (square): 330 mm Cutting capacity at 90° (rectangle): 450 x 320 mm Saw band length: 4250 x 34 x 1.1 mm Band speed: 40 + 80 m/min Table height: 845 mm Saw blade width: 34 mm Total power requirement: 2.2 kW Machine weight: approx. 0.985 t Space requirements: approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I • Mitre cuts left & right up to 60° without machine conversion • 34 mm saw blade width • Large, ball-bearing supported, rotary worktable • Saw blade guides adjustable over extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates • Infeed and outfeed roller • Removable chip tray (for cleaning) • Free-standing, safe, ergonomic control panel • Storage space for blades and consumables • Cutting pressure control and feed rate regulator • Fully hydraulic vice • Quick clamping (front loading) • Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to start of material or direct cutting for series cuts 4. Switch off saw band 5. Raise frame just above the material 6. Open vice Optimal, material-independent cutting results through fine adjustment of the saw frame via: * Pressure control valve (cutting force) * Feed rate control valve (cutting speed) * Clearly arranged selector switch with pictograms for intuitive operation Pgsdpfx Aefgyicedysg

Stanje: novo, Cutting range at 90 degrees: round 250 mm Cutting range at 90 degrees: square 210 mm Cutting range at 90 degrees: rectangle 290 x 210 mm Saw band length: 2,965 x 27 x 0.9 mm Table height: 940 mm Band speed: 35 + 70 m/min Pgeded Iip Nopfx Adyog Total power requirement: 1.1 / 1.3 kW Machine weight approx. 0.35 t Space requirement approx. 1.3 x 0.8 x 1.5 m SPECIAL PROMOTIONAL PRICE!!! Double mitre metal bandsaw featuring: - Band speed 35 + 70 m/min - Mitre cuts up to 60° left and 45° right - Ball-bearing turntable for rapid mitre adjustment - Movable quick-action vice - Quick-release lever - Automatic coolant system

Stanje: novo, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangle 300 x 180 mm Saw blade length 2,765 x 27 x 0.9 mm Table height 950 mm Band speed 35 + 70 m/min Total power requirement 1.5/1.8 kW Machine weight approx. 0.42 t Space requirement approx. 1.23 x 1.7 x 1.75 m Podpfxjurc S Re Adyjgg Double mitre metal band saw, GBS 250 Super AutoCut (20413) - Mitre cuts up to 60° to the left and 45° to the right - Ball-bearing rotary table - Quick-release vice - Heavy-duty, large material support - Automatic coolant system

Stanje: novo, Cutting diameter: 250 mm Saw band length: 2950x27x0.9 mm Table height: mm (not specified) Band speed: 36/72 m/min Total power requirement: 1.8 kW Machine weight: approx. 440 kg Pjdpfx Adjfg E H Noysgg Space requirement: approx. m (not specified) Absolute special price!! 7,170 EUR (Current price as of 2024 is 9,425 EUR) Standard equipment: - Vice with quick adjustment and adjustable guide rails - Hydraulic blade tensioning device with tension pressure gauge - Base frame with removable coolant tray - Chip removal brush - Precision stops set for cuts at: 0°, 45° and 60° to the left and 45° to the right - Rotary table for double miter cuts - Electric coolant system 48 V (Option to install a micro-spray device)

Stanje: novo, Cutting capacity at 90° (round): 250 mm Cutting capacity at 90° (square): 210 mm Cutting capacity at 90° (rectangular): 290 x 210 mm Saw blade length: 2,965 x 27 x 0.9 mm Table height: 940 mm Blade speed: 25 - 90 m/min Total power requirement: 1.1/1.3 kW Machine weight: approx. 0.35 t Space requirement: approx. 1.3 x 0.8 x 1.5 m Pgodpfxefgyh So Adysg SPECIAL PRICE!!! Double miter metal band saw Hydraulic semi-automatic with: - Hydraulic vice - Material height sensor - Cut monitoring via ammeter - Cutting pressure and feed rate regulator - Blade speed 25 - 90 m/min - Miter cuts up to 60° left and 45° right - Patented, ball-bearing rotary table for easy miter adjustment - Movable quick-release vice - Quick-release lever - Automatic cooling system

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. Pgjdpfxofg E Hps Adyjg - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: rabljeno, Leto izdelave: 1998, Cutting capacity at 90 degrees: round 250 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular Saw band length 2965 x 27 x 0.9 mm Table height mm Band speed 37 / 76 m/min Total power requirement 1.0 kW Machine weight approx. 0.38 t Space requirements approx. 1.0 x 1.6 x 1.4 m Pjdpfx Aju Sbpvedyegg Double mitre band saw

Stanje: novo, Cutting diameter: 250 mm Saw blade length: 2950 x 27 x 0.9 mm Table height: approx. 800 mm Band speed: 36/72 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.37 t Required space: approx. m MEP Sawing Machine: Saw bow, vice assembly, and base made of robust cast iron Precision degree markings on the cast iron frame Psdpfxefg E H Io Adyjgg Electrical system (with fully identifiable wiring and 24V low-voltage system) IP 55 control lever for manual operation (if available) Rotating chip cleaning brush for the saw blade Closing unit with quick-approach vice Accurate stops with adjustments for miter cuts at 0°, 45°, 60° left Bi-metal saw blade 2950 x 27 x 0.9 mm Tools, operating instructions, and spare parts ordering instructions in user’s language SHARK 281 with manual operation and SHARK 281 CCS with manual operation and cut with automatic head feed by own weight. CCS (Cut Control System) with (A) switch for manual and automatic cutting – (B) cutting speed adjustment – (C) hydraulic brake with reservoir – (D) end stop for stopping the blade; also available as an option for already produced machines. Quick-adjust vice Hydraulic converter for band tension display Electric coolant pump for cooling and lubricating the saw blade and removable coolant tray below the base Versions with pneumatic vice (MA) feature opening and closing of the vice by manual valve (pedal control available as an option)

Stanje: novo, Cutting diameter: 185 mm Saw blade length: 2,085 x 20 x 0.90 mm Table height: 915 mm Blade speed: 35/70 m/min Cutting capacity at 90 degrees (round): 185 mm Cutting capacity at 90 degrees (square): 150 mm Cutting capacity at 90 degrees (flat): 220 x 150 mm Connection voltage: 400 V Total power requirement: 0.8 kW Machine weight: approx. 195 kg Space requirement: approx. 550 x 1,280 x 1,740 mm Pgjdpfjhpktrjx Adyeg Metal bandsaw with stepless electronic speed control and automatic lowering. - Selector switch for hydraulically controlled or manual band arm lowering - Saw arm can be swiveled up to 60° to the right - Quick-release vice - Blade guidance with 8 ball bearings - Hydraulic saw blade tensioning with tension display and blade break protection - Including coolant device - Including machine base cabinet

Stanje: novo, Cutting capacity at 90°: round 250 mm Cutting capacity at 90°: square 210 mm Cutting capacity at 90°: rectangular 290 x 210 mm Saw band length: 2,965 x 27 x 0.9 mm Table height: 940 mm Band speed: 35 / 70 m/min Total power requirement: 1.1/1.3 kW Machine weight approx. 0.35 t Required space approx. 1.3 x 0.8 x 1.5 m SPECIAL OFFER PRICE!!! Double mitre metal bandsaw, hydraulic semi-automatic, equipped with: - Hydraulic vice - Material height sensor - Cut monitoring via ammeter - Adjustable cutting pressure feed regulator Pjdpfjd Iip Rox Adyegg - Band speed 34 / 74 m/min - Mitre cuts up to 60° left and 45° right - Patented ball-bearing turntable for easy mitre adjustment - Rapid-action vice, movable - Quick-release lever - Automatic coolant system Shipping cost share: 120 EUR

Stanje: novo, Cutting capacity at 90° (round): 250 mm Cutting capacity at 90° (square): 210 mm Cutting capacity at 90° (rectangular): 290 x 210 mm Saw blade length: 2,965 x 27 x 0.9 mm Table height: 940 mm Blade speed: 25 – 90 m/min Total power requirement: 1.1 / 1.3 kW Machine weight: approx. 0.35 t Required space: approx. 1.3 x 0.8 x 1.5 m SPECIAL PROMOTIONAL PRICE!!! (20347) Double miter metal band saw featuring: - Blade speed: 25 – 90 m/min - Miter cuts up to 60° left and 45° right - Ball-bearing turntable for quick miter adjustment - Sliding quick-release vise - Quick-clamping lever Pgedefgyh Repfx Adyeg - Automatic coolant system

Stanje: kot nova (razstavni stroj), A demonstration metal band saw with base frame, quick-release device, and coolant system. Cutting capacity Round/Rectangular/Flat 90°: 220/220x220/250x155 mm Round/Rectangular/Flat 45°: 160/160x160/160x100 mm Pedpfxspgmkyj Adyogg Round/Rectangular/Flat 30°: 100/100x100/100x85 mm Cutting speed: 32/66 m/min For further technical data, please refer to the PDF document. Technical data and dimensions: subject to change/errors excepted.

Stanje: novo, Območje reza pri 90 stopinjah: okroglo 250 mm Območje reza pri 90 stopinjah: kvadratno 210 mm Območje reza pri 90 stopinjah: pravokotno 290 x 210 mm Dolžina žaginega traku 2.965 x 27 x 0,9 mm Višina mize 940 mm Hitrost traku 25 - 90 m/min Skupna potrebna moč 1,1/1,3 kW Teža stroja pribl. 0,35 t Prostorske zahteve pribl. 1,3 x 0,8 x 1,5 m RAZSTAVNI STROJ po posebni ceni!!! Dvostranska tračna žaga za kovino, polavtomatska z: - Hidravlično vpenjalo - Senzor višine materiala - Nadzor reza preko ampermetra - Regulator pritiska reza - Hitrost traku 25 - 90 m/min - Poševni rezi do 60° levo in 45° desno - Patentirana, kroglična vrtljiva miza za enostavno nastavitev kota - Hitro nastavljivo vpenjalo, pomično - Vzvod za hitro vpenjanje - Samodejno hlajenje Pgodpfx Asxfwcdsdyjg

Stanje: novo, Leto izdelave: 2022, SPECIAL PRICE, Stock machine year of manufacture 2022, Condition: new List price: €14,110 STOCK MACHINE – Semi-automatic metal band saw with high cutting precision! With this machine, miter cuts are infinitely adjustable from 45° left to 30° right (Swivel range: 45° left and 60° right). Technical specifications ● Cutting capacity - 90° round: 280 mm / square: 240 mm / rectangular: 420 x 200 mm - 45° right round: 260 mm / square: 240 mm / rectangular: 260 x 200 mm - 30° right round: 170 mm / square: 160 mm / rectangular: 160 x 160 mm - 45° left round: 200 mm / square: 180 mm / rectangular: 250 x 100 mm ● Drive power: 0.9–1.5 kW / 400 V / 50 Hz ● Band speed: 35 / 70 m/min ● Saw blade dimensions: 3270 x 27 x 0.9 mm Standard features: Pgsdjmf T Hpopfx Adysg ● Hydraulic control of saw frame ● Automatic saw frame height limitation via contact sensor ● Easy and convenient material clamping via a hydraulic short-stroke cylinder ● Hydraulic cutting pressure regulation ● Simple, stepless miter adjustment of the saw ● Electric blade tension monitoring with saw blade breakage control

Stanje: novo, Leto izdelave: 2023, ! Mašinos pasiūlymas klientams Lietuvoje, Latvijoje, Estijoje. Naujos aukštos našumo automatinės juostinių pjūklų staklės HBE Dynamic serijos užtikrina našumą, paprastą valdymą ir energijos efektyvumą. Galite pasikliauti tiksliais ir greitais pjūviais net ir sudėtingai pjaunamose medžiagose – tiek ruošiniuose, vamzdžiuose, tiek ir profiliuose. Tvirto, mažai vibruojančio pjūklo rėmo iš ketaus konstrukcija bei linijinis kreipiančiųjų portalinis dizainas garantuoja geriausius pjovimo rezultatus ir maksimalų pjūklo juostos tarnavimo laiką. Standartinė BEHRINGER servo tiekimo sistema su pjovimo slėgio kontrole užtikrina trumpą neveikos laiką ir tikslų pjūklo padavimo judesį. Standartinė pjovimo slėgio kontrolė apsaugo pjūklo juostą nuo perkrovos ir žymiai prailgina tarnavimo laiką. Tai sudaro geriausias sąlygas dinamiškam, įrankius tausojančiam pjovimui. Galimi modeliai: - HBE261A Podpfjiy Rc Rsx Adyogg - HBE321A - HBE411A - HBE511A

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 400 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: ERGONOMIC 320.250 DG, dolžina tračnega lista: 2.910 mm, širina tračne žage: 1 mm, skupna višina: 27 mm, skupna masa: 345 kg, širina mize: 900 mm, dolžina mize: 1.650 mm, delovna višina: 1.250 mm, lastna masa: 345 kg, Malo rabljena tračna žaga, delujoča. Na voljo za preizkus po dogovoru. Pgodpfxow T U Afj Adyog

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0306283/0, - Zelo dobra tračna žaga za kovino. Visoka zmogljivost rezanja. Pgjdpoxnartefx Adyjg - 5 novih tračnih žag - Valjčna proga cca 5 m (tudi popolnoma funkcionalna)

Stanje: novo, 1 brand new semi-automatic horizontal bandsaw with double mitre Manufacturer: HUVEMA / Beka-Mak, Origin Turkey Model: HU 230 DGH-4 / BMSY 230 DGH Technical Data: Cutting capacity: Round 230 mm Rectangular 320 x 130 mm Square 230 mm -45° Round 180 mm -45° Flat 230 x 100 mm -45° Square 150 mm +45° Round 210 mm +45° Flat 230 x 160 mm +45° Square 180 mm +60° Round 120 mm +60° Flat 120 x 100 mm +60° Square 100 mm Working height 795 mm Main drive motor power 1.0 – 1.3 kW, 400 V, 50 Hz Coolant pump motor power 0.12 kW 2 speeds 35 / 70 m/min Saw blade size 2730 x 27 x 0.9 mm Dimensions (L x W x H) 1350 x 700 x 1300 mm Weight 415 kg Accessories / Special Features: • Semi-automatic operation • Hydraulic vice, clamping via foot pedal • Double mitre cuts via swivelling frame o Material remains straight in position! Pgodpfsvyidmsx Adyeg o No need to turn the material for mitre cuts! o High efficiency with significant time savings! • Pre-set precise stops at 0°, 45° and 60° left and 45° right • Interchangeable work table • Hydraulic vice, laterally adjustable to left and right • Adjustable length stop, 500 mm, for repeat cuts of the same length • Arm lowering regulated steplessly by hydraulic cycle; after completing the cut, the arm returns to the starting position and the vice opens automatically • Coolant system • Swarf brush • Swivelling control panel • Electrical safety switches for blade tension and saw blade cover • Emergency stop switch • CE-compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel

Stanje: novo, Bernardo Double Mitre Band Saw MBS 300 DG-V PRO Technical Specifications Cutting capacity round / square 90°: 255 mm / 210 x 210 mm Cutting capacity flat 90°: 310 x 210 mm Cutting capacity round / square 45° right: 220 mm / 210 x 210 mm Cutting capacity flat 45° right: 220 x 200 mm Cutting capacity round / square 45° left: 230 mm / 200 x 200 mm Cutting capacity flat 45° left: 230 x 200 mm Cutting capacity round / square 60° right: 135 mm / 135 x 135 mm Cutting capacity flat 60° right: 135 x 135 mm Working height: 930 mm Saw blade dimensions: 2750 x 27 x 0.9 mm Infinitely variable cutting speed: 20 – 80 m/min Coolant pump: 100 W Motor rated output S1 100%: 1.5 kW Motor input power S6 40%: 2.2 kW Voltage: 400 V Machine dimensions (L x W x H): 2000 x 1250 x 1900 mm Weight approx.: 350 kg Scope of delivery • Saw blade • Workpiece stop • Machine base • Manometer for blade tension • Saw blade guide with carbide inserts Psdpfxsd Hzbwo Adysgg • Quick-release vice • Coolant system • Hydraulic downfeed cylinder • Motor protection switch • Automatic shut-off

Stanje: novo, PILOUS Double Miter Bandsaw ARG 260 plus H with automatic hydraulic lifting of the saw frame Including special accessories: Powered chip brush, band tension indicator Roller conveyor D 300 / 3m with manual measuring system Roller conveyor D 300 / 3m Cutting range: Pgjdpfx Aoilqbuedyjg Round: 90° -45° +45° +60° in mm: 260-175-200-125 Square: 90° -45° +45° +60° in mm: 255-145-185-120 Rectangle: 90° -45° +45° +60° in mm: 300 x 200-190 x 100-185 x 200-125 x 120 Main motor 400 V, 50 Hz, 1.4 kW Pump motor 400 V, 50 Hz, 0.05 kW Hydraulic power unit motor 400 V, 50 Hz, 0.18 kW Saw blade speed 35/70 m/min Saw band length 2880 x 27 x 0.9 mm Working height from vise 910 mm Oil in hydraulic system approx. 6 l (ISO 6743/4-HM, DIN 51 524 Part 2-HLP) Coolant tank approx. 15 l Machine dimensions (min.) 950 x 1650 x 1450 mm Machine dimensions (max.) 1550 x 1850 x 2050 mm Machine weight 490 kg

Stanje: novo, PILOUS Double Mitre Band Saw ARG 300 plus H.F. with automatic hydraulic lifting of the saw frame Including special accessories: Motorized chip brush, blade tension indicator Roller conveyor D 400 / 3m incl. digital measuring system Roller conveyor D 400 / 3m Cutting capacities: Round: 90° 300 mm, -45° 220 mm, +45° 240 mm, +60° 155 mm Square: 90° 290 mm, -45° 195 mm, +45° 225 mm, +60° 150 mm Rectangle: 90° 375 x 190 mm, Pgodpfoh S Ikkex Adyog -45° 240 x 100 mm, +45° 240 x 160 mm, +60° 150 x 150 mm Main motor: 400 V, 50 Hz, 2.2 kW Pump motor: 400 V, 50 Hz, 0.05 kW Hydraulic unit motor: 400 V, 50 Hz, 0.18 kW Blade speed: 15–90 m/min, stepless Blade dimensions: 3150 x 27 x 0.9 mm Workpiece clamping height: 910 mm Coolant tank: approx. 15 l Machine dimensions (min.): 950 x 1750 x 1600 mm Machine dimensions (max.): 1700 x 2000 x 2150 mm Machine weight: 645 kg

Stanje: novo, Cutting diameter: 220 mm Saw band length: 2455 mm Table height: 850 mm Cutting width: 230 mm Cutting speed: 25 - 80 m/min Pgoded Iip Tepfx Adysg Saw band dimensions: 2455 x 27 x 0.9 mm Cutting capacity at 60° round: 90 mm Cutting capacity at 60° square: 90 mm Cutting capacity at 60° flat: 90 x 100 mm Cutting capacity at 45° round: 150 mm Cutting capacity at 45° square: 150 mm Cutting capacity at 45° rectangular: 150 x 210 mm Cutting capacity at 90° round: 220 mm Cutting capacity at 90° square: 210 mm Cutting capacity at 90° rectangular: 230 x 185 mm Total power requirement: 1.2 kW Machine weight: approx. 0.24 t Space requirement: approx. 1.2 x 0.6 x 1.7 m SPECIAL OFFER PRICE!!! -Mitre cuts up to 60° to the left -Cutting speed 25 - 80 m/min -Vice with quick-release mechanism -Carbide saw band guide -Band tension control -Electric coolant system Auto-Cut System = 3-stage system: -Automatic saw frame descent via hydraulic cylinder -Infinitely variable feed rate -With limit switch -Rapid descent of the saw frame from home position to workpiece, then switches to normal feed rate -Manual operation

Stanje: novo, Cutting diameter: 240 mm Saw band dimensions: 2730 x 27 x 0.9 mm Table height: 920 mm Cutting speed: 35 + 70 m/min Cutting capacity at 90°, round: 240 mm Cutting capacity at 90°, square: 230 mm Cutting capacity at 90°, rectangular: 270 x 230 mm Cutting capacity at 45°, round: 210 mm Cutting capacity at 45°, square: 200 mm Cutting capacity at 45°, rectangular: 200 x 210 mm Cutting capacity at 60°, round: 130 mm Cutting capacity at 60°, square: 130 mm Cutting capacity at 60°, flat: 130 x 160 mm Total power requirement: 1.2 kW Machine weight approx.: 0.26 t Space requirement approx.: 0.9 x 1.6 x 1.74 m • Mitre cut left 60° • Quick-action vice with rapid clamping device • Quick-release handle for easy handling • Frame and gearbox are cast as a single unit, ensuring very quiet and low-vibration cutting • Electrical monitoring of blade tension and blade breakage, blade cover included Pgjdpfx Aod Iip Ssdyeg • Carbide blade guides • Large machine bed • Machine base (delivered disassembled) with automatic coolant system The AutoCut system consists of: Hydraulic cylinder, feed control, spring assembly, limit switch Automatic lowering of the saw frame by hydraulic cylinder; infinitely variable feed adjustment with limit switch at the end of the cut. High-speed lowering of the saw frame from home position to the workpiece, then switch to normal feed rate (e.g., for marking). Manual operation: Hydraulic cylinder acts as a brake cylinder (e.g., for notching). The brake cylinder allows the saw to be positioned in any position during the return stroke.