Vodoravne tračne žage – polavtomatske – okroglo območje rezanja 0–300 mm nakup rabljenega (107)

Leto izdelave: 2020, stanje: kot nova (razstavni stroj), Bandsaw Machine Brand: KASTO Model: micut P 2.6 Year of manufacture: 2020 - demonstration machine Machine No.: 6151 101 006 with warranty Standard configuration includes: - Infinitely variable cutting speed: 20 - 110 m/min - Horizontal vise, manual clamping - Infinitely adjustable mitre angle (-45° to +60°) - Infinitely adjustable saw band arm Iasdpfx Aedur E Aodksp - Adjustable feed via own weight - Cutting bar as material support - Automatic shutoff at end of cut - Coolant system - Operating manual Options included: - Drip oiler

Stanje: novo, Band Saw Machine Manufacturer: METALLKRAFT Model: BMBS 300 x 320 HA-DG Item No.: 3690041 Condition: New machine Cutting Capacity (round): 300 mm Blade Speed: 20-100 m/min, stepless Ijdpjilg Hdefx Adkeap Standard equipment includes: - Fully hydraulic, semi-automatic design. After starting, the machine clamps automatically; after finishing the cut, it returns to the starting position, stops the saw blade, and opens the vise. - Cutting sensor for automatic material height detection - Horizontal vise, mechanical, hydraulic - Saw blade tension monitoring, electromechanical - Chip cleaning brush - Measuring stop with 1,000 mm scale - Coolant system - Operating manual

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Cutting Capacity 0° round (pipe) 300 mm Cutting Capacity 0° round (solid material) 180 mm Cutting Capacity 0° rectangular horizontal (hollow section) 320 x 290 mm Cutting Capacity 0° bundle (pipe) 320 x 160 mm Isdpfx Adexz Dqmokoap Cutting Capacity -45° round (pipe) 300 mm Cutting Capacity -45° round (solid material) 110 mm Cutting Capacity -45° rectangular horizontal (hollow section) 300 x 280 mm Cutting Capacity -60° round (pipe) 200 mm Cutting Capacity -60° round (solid material) 80 mm Cutting Capacity -60° rectangular horizontal (hollow section) 190 x 200 mm Cutting Capacity +45° round (pipe) 270 mm Cutting Capacity +45° round (solid material) 110 mm Cutting Capacity +45° rectangular horizontal (hollow section) 270 x 200 mm Table height for material infeed 800 mm Main motor 2.6 kW Cutting speed, infinitely variable 20 - 100 m/min Saw blade size 3660 x 27 x 0.9 mm Machine dimensions (L x W x H) approx. 1800 x 950 x 1400 mm Net weight 585 kg Accessories / Special Features: • Semi-automatic pivoting frame metal band saw • After starting the cutting cycle, the vice automatically clamps – after the process ends, it returns to the starting position • For mitre cuts from +60° to -45° with frequency inverter • Suitable for cutting e.g. stainless steel, tool steel, hollow sections, and solid materials • Fully hydraulically controlled sawing functions • Saw drive with low-maintenance, oil-lubricated worm gear • Robust three-phase motor • Motor equipped with overload protection • Ball-bearing rotary table • Saw arm inclined by 25°, resulting in longer blade life • Swivelling saw arm from +60° to -45° • Chip removal brush for optimal cleaning and maintenance of the saw blade • With frequency inverter: allows for infinitely variable adjustment of the saw blade speed from 20 - 100 m/min. • BRP – Saw blade monitoring • Hydraulic vice with manual quick-release for lateral adjustment • Limit switches control the upper and lower position of the saw arm • No need to set the upper end point • Length stop with scale, 3 m removal on the left side • Cut probe • Swivelling control panel • Micro spray unit • 2 x roller conveyors: 3 m unloading on the left and 6 m infeed on the right • CE-compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, vrsta vhodnega toka: Enosmerni tok, največja višina reza: 285 mm, Razpon rezanja okroglega jekla pri 45°: 230 mm, Obseg rezanja okroglega jekla pri 90°: 250 mm, dolžina tračnega lista: 2.950 mm, širina tračne žage: 27 mm, Title: MEP SHARK 282 CCS [with semi-automatic descent] Article Number: SH282CCS Motor Output: 1.5/1.8 kW Vice Opening: 285 mm Blade Dimensions: 2950x27x0.9 mm Weight: 440 kg Cutting Speed: 36/72 m/min Cutting Capacity at 0°: 250 / 220x220 / 280x220 mm Cutting Capacity at 45° Right: 230 / 200x200 / 220x200 mm Cutting Capacity at 45° Left: 200 / 170x170 / 200x140 mm Cutting Capacity at 60° Right: 120 / 80x80 / 140x80 mm Cutting Capacity at 60° Left: Description: MEP Bandsaw: Standard Equipment: - Quick-adjust vice with adjustable guide strips - Hydraulic blade tensioning device with tension indicator - Base frame with removable coolant tray - Swarf removal brush - Precision stops preset for cuts at 0°, 45°, and 60° left, and 45° right - Length stop for repeat cuts of equal length - Material support arm, can be fitted with roller conveyor on the loading side - Turntable for dual miter cuts - Machine designed for pallet truck / forklift transport - Bi-metal saw band M2 for solid and profile material - Tools and operating manual Electrical Equipment: - Control panel - Clearly marked cable connections - Operation-ready indicator light - Main safety switch - Emergency stop button - Speed selector switch - Thermal-magnetic protection - Undervoltage release - Control handle, IP 55 protected - Phase sequence indicator - 24V low-voltage system Iodpfoxyywmjx Adkjap - 48V electric coolant system - (Optional micro-spray device can be installed) - Motor: 1.5/1.8 kW - 2 cutting speeds: 36/72 m/min - Vice opening: 285 mm - Saw blade: 2950 x 27 x 0.9 mm - Weight: 440 kg

Stanje: dober (rabljeno), Leto izdelave: 1985, Dimensions L-W-H 400x300x200 mm Saw blade diameter 420 mm Machine weight approx. 3500 kg Manufacturer: KASTO Iajdevf N Suepfx Adkjp Model: HBA 420U Year of manufacture: 1985 Dimensions (Width x Height x Depth): approx. 400x200x300 cm Fully automatic NC horizontal bandsaw 1 chip conveyor, 1 external chip conveyor, 1 driven roller conveyor for approx. 450 cm.

Stanje: dober (rabljeno), Leto izdelave: 1995, Dimenzije D-Š-V: 3,50/2,40/2,20 mm Teža stroja cca 3500 kg Proizvajalec: KASTO Iaedpfx Asw N S Ecedkjp Tip: HBA 420 AU Letnik proizvodnje: 1995 Pol-avtomatska NC horizontalna tračna žaga s hidravlično vpenjalno napravo do 400 mm, 1 transportni trak za odrezke, 1 zunanji transportni trak za odrezke, 1 valjčna proga, 1 valjčna proga, hidravlični pogon, motor izklopljen, Mere (širina x višina x globina): cca 400x200x350 cm

Stanje: rabljeno, Leto izdelave: 2009, številka stroja/vozila: 150006, Ponudba 25301 Tehnični podatki: - Območje rezanja pri 90° okroglo: 280 mm - Kvadrat: 280 x 280 mm - Pri 45° okroglo: 240 mm - Kvadrat: 210 x 210 mm - Dimenzija tračnega lista: 3400 x 27 x 0,9 mm - Brezstopenjske hitrosti rezanja: 20 do 100 m/min - Hidravlično dviganje in spuščanje žaginega okvirja - Tlačna sila pri rezu brezstopenjsko nastavljiva: 0 do 10 m/min - Skupna pogonska moč: 400 V / 1,7 kW - Naprava za hlajenje - Prislon - Potreben prostor cca Š 900 x V 1100 x G 1800 mm Iodjxtmzljpfx Adkoap - Teža cca 550 kg

Stanje: dober (rabljeno), Leto izdelave: 1999, številka stroja/vozila: 108401 23-D, Ponudba 25318 Tehnični podatki: Iodpfxsxta N Aj Adkjap - Ročni tračni žagalni stroj - Dimenzija žaginega traku: 2375 x 20 x 0,9 mm - 2 hitrosti rezanja: N 33 / 66 o/min - Največja vpenjalna zmogljivost: 205 mm - Nastavljiv kot rezanja levo + desno: 30° - Rezni razpon: - 90° okroglo: 160 mm - 90° kvadratno: 160 mm - 90° ploščato: 200 x 100 mm - 45° levo + desno okroglo: 140 mm - 45° ploščato: 140 x 60 mm - Pogon: 400 V / 1,5 / 1,8 kW - Opremljenost s hladilnim sredstvom - Odvodni valjčni transporter z omejevalom: 3000 mm - Dovodni valjčni transporter: 1500 mm - Teža: pribl. 350 kg - Potrebni prostor: pribl. Š 1100 x V 1700 x G 1550 mm

Stanje: novo, Leto izdelave: 2022, SPECIAL PRICE, Stock machine year of manufacture 2022, Condition: new List price: €14,110 STOCK MACHINE – Semi-automatic metal band saw with high cutting precision! With this machine, miter cuts are infinitely adjustable from 45° left to 30° right (Swivel range: 45° left and 60° right). Technical specifications ● Cutting capacity - 90° round: 280 mm / square: 240 mm / rectangular: 420 x 200 mm - 45° right round: 260 mm / square: 240 mm / rectangular: 260 x 200 mm - 30° right round: 170 mm / square: 160 mm / rectangular: 160 x 160 mm - 45° left round: 200 mm / square: 180 mm / rectangular: 250 x 100 mm ● Drive power: 0.9–1.5 kW / 400 V / 50 Hz ● Band speed: 35 / 70 m/min ● Saw blade dimensions: 3270 x 27 x 0.9 mm Iaodpfx Adjmf T Hpskop Standard features: ● Hydraulic control of saw frame ● Automatic saw frame height limitation via contact sensor ● Easy and convenient material clamping via a hydraulic short-stroke cylinder ● Hydraulic cutting pressure regulation ● Simple, stepless miter adjustment of the saw ● Electric blade tension monitoring with saw blade breakage control

Leto izdelave: 1992, stanje: dober (rabljeno), številka stroja/vozila: 29-0288, Offer 04612 Technical specifications: - Cutting capacity at 90° round: 260 mm - flat: 450 x 240 mm - Cutting capacity at 45° round: 230 mm - flat: 240 x 200 mm - Machine is mounted on original swiveling base - Saw band dimensions: 3660 x 25 x 0.9 mm Iaodogin Ndopfx Adkjp - Cutting speeds: 20 / 35 / 50 / 70 m/min - Hydraulic raising and lowering of the saw frame - Cutting pressure infinitely variable: 0 - 10 m/min - Total drive power: 400 V / 0.8 kW - Coolant system - Space requirement approx.: W 2100 x H 1200 x D 1000 mm - Weight approx.: 500 kg

Stanje: novo, Cutting diameter: 255 mm Saw band length: 2765 x 0.9 x 27 mm Cut width: 300 x 180 mm Speeds: 35 + 70 rpm Total power requirement: 1.8 kW Machine weight: approx. 450 kg Space requirement: approx. 1.7 x 1.23 x 1.75 m SPECIAL OFFER!!! Double-mitre metal band saw, frequency inverter, hydraulic semi-automatic GBS 250 Super HA-I Easy • Mitre cuts: left 60° + right 45° • Material height sensor (automatic cut start detection) • Frame and gearbox made from a single casting: extremely quiet and low-vibration operation • Hydraulically operated vice, laterally adjustable • Guided, high-quality industrial bearings • Heavy-duty vice and machine cast frame • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Adjustable cutting pressure feed regulator • Support roller on infeed side • Ball-bearing rotary table Semi-automatic operation: 1. Clamp material Ijdpsfn Andjfx Adkjap 2. Start saw 3. Rapid descent to material start or, for serial cutting, start cutting immediately 4. Stop saw band 5. Raise frame slightly above the material 6. Open vice

Stanje: novo, Cutting diameter: 227 mm Saw band length: 2455 mm Table height: 840 mm Cutting width: 260 mm Speed range: 36 / 72 m/min Saw blade dimensions: 2455 x 27 x 0.9 mm Cutting area at 90 degrees (round): 227 mm Cutting area at 90 degrees (square): 220 mm Cutting area at 90 degrees (flat): 260 x 220 mm Cutting area at 45 degrees (round): 150 mm Cutting area at 45 degrees (square): 145 mm Cutting area at 45 degrees (flat): 200 x 220 mm Total power requirement: 1.5 kW Machine weight approx. 0.25 t Space requirement approx. 0.8 x 1.4 x 1.5 m Mitre band saw - automatic cutting - base frame Iaodpfx Aefgyh Esdkjp - coolant pump - chip brush for saw blade cleaning - quick-adjust vice

Stanje: novo, Cutting diameter: 220 mm Saw blade length: 2450 x 27 x 0.9 mm Table height: 915 mm Blade speed: 35 + 70 m/min Connection voltage: 400 V Cutting capacity at 90 degrees: round 220 mm Cutting capacity at 90 degrees: square 210 x 210 mm Cutting capacity at 90 degrees: flat 230 x 185 mm Total power requirement: 1.2 kW Iodpfefgyh Njx Adkeap Machine weight: approx. 240 kg Space requirements: approx. 870 x 1550 x 1740 mm The Zimmer Z241/R is a self-lowering saw designed for mitre cuts from 0° to 60° to the left. After the cut is completed, the machine stops automatically via a safety limit switch. The lowering speed is infinitely adjustable via a hydraulic system. Raising the saw arm after the cut can be set to any desired position; the saw arm will remain at the selected position. The Z241/R comes equipped with: - Hydraulic cylinder - Coolant pump - Eccentric vice - Machine base - Saw blade - 400V plug (16A) The machine is delivered fully assembled and ready for immediate operation.

Stanje: novo, Cutting capacity at 90° (round): 350 mm Cutting capacity at 90° (square): 330 mm Cutting capacity at 90° (rectangle): 450 x 320 mm Saw band length: 4250 x 34 x 1.1 mm Band speed: 40 + 80 m/min Table height: 845 mm Saw blade width: 34 mm Total power requirement: 2.2 kW Machine weight: approx. 0.985 t Space requirements: approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I • Mitre cuts left & right up to 60° without machine conversion Iaodpofgyicjfx Adkop • 34 mm saw blade width • Large, ball-bearing supported, rotary worktable • Saw blade guides adjustable over extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates • Infeed and outfeed roller • Removable chip tray (for cleaning) • Free-standing, safe, ergonomic control panel • Storage space for blades and consumables • Cutting pressure control and feed rate regulator • Fully hydraulic vice • Quick clamping (front loading) • Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to start of material or direct cutting for series cuts 4. Switch off saw band 5. Raise frame just above the material 6. Open vice Optimal, material-independent cutting results through fine adjustment of the saw frame via: * Pressure control valve (cutting force) * Feed rate control valve (cutting speed) * Clearly arranged selector switch with pictograms for intuitive operation

Stanje: novo, Cutting range at 90 degrees: round 250 mm Cutting range at 90 degrees: square 210 mm Ijdpod Iip Nsfx Adkoap Cutting range at 90 degrees: rectangle 290 x 210 mm Saw band length: 2,965 x 27 x 0.9 mm Table height: 940 mm Band speed: 35 + 70 m/min Total power requirement: 1.1 / 1.3 kW Machine weight approx. 0.35 t Space requirement approx. 1.3 x 0.8 x 1.5 m SPECIAL PROMOTIONAL PRICE!!! Double mitre metal bandsaw featuring: - Band speed 35 + 70 m/min - Mitre cuts up to 60° left and 45° right - Ball-bearing turntable for rapid mitre adjustment - Movable quick-action vice - Quick-release lever - Automatic coolant system

Stanje: novo, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangle 300 x 180 mm Saw blade length 2,765 x 27 x 0.9 mm Table height 950 mm Band speed 35 + 70 m/min Total power requirement 1.5/1.8 kW Machine weight approx. 0.42 t Space requirement approx. 1.23 x 1.7 x 1.75 m Double mitre metal band saw, GBS 250 Super AutoCut (20413) - Mitre cuts up to 60° to the left and 45° to the right - Ball-bearing rotary table - Quick-release vice Iodpfxourc S Re Adkeap - Heavy-duty, large material support - Automatic coolant system

Stanje: novo, Cutting capacity at 90° (round): 250 mm Cutting capacity at 90° (square): 210 mm Cutting capacity at 90° (rectangular): 290 x 210 mm Saw blade length: 2,965 x 27 x 0.9 mm Table height: 940 mm Blade speed: 25 - 90 m/min Total power requirement: 1.1/1.3 kW Machine weight: approx. 0.35 t Space requirement: approx. 1.3 x 0.8 x 1.5 m SPECIAL PRICE!!! Double miter metal band saw Hydraulic semi-automatic with: - Hydraulic vice Iasdpfxsfgyh So Adkep - Material height sensor - Cut monitoring via ammeter - Cutting pressure and feed rate regulator - Blade speed 25 - 90 m/min - Miter cuts up to 60° left and 45° right - Patented, ball-bearing rotary table for easy miter adjustment - Movable quick-release vice - Quick-release lever - Automatic cooling system

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Iodpsfg E Hpjfx Adkeap Price on request.

Stanje: novo, Cutting diameter: 250 mm Saw blade length: 2950 x 27 x 0.9 mm Table height: approx. 800 mm Band speed: 36/72 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.37 t Required space: approx. m MEP Sawing Machine: Saw bow, vice assembly, and base made of robust cast iron Precision degree markings on the cast iron frame Electrical system (with fully identifiable wiring and 24V low-voltage system) IP 55 control lever for manual operation (if available) Rotating chip cleaning brush for the saw blade Closing unit with quick-approach vice Accurate stops with adjustments for miter cuts at 0°, 45°, 60° left Bi-metal saw blade 2950 x 27 x 0.9 mm Tools, operating instructions, and spare parts ordering instructions in user’s language Iedpfxofg E H Ij Adksap SHARK 281 with manual operation and SHARK 281 CCS with manual operation and cut with automatic head feed by own weight. CCS (Cut Control System) with (A) switch for manual and automatic cutting – (B) cutting speed adjustment – (C) hydraulic brake with reservoir – (D) end stop for stopping the blade; also available as an option for already produced machines. Quick-adjust vice Hydraulic converter for band tension display Electric coolant pump for cooling and lubricating the saw blade and removable coolant tray below the base Versions with pneumatic vice (MA) feature opening and closing of the vice by manual valve (pedal control available as an option)

Stanje: novo, Cutting diameter: 185 mm Saw blade length: 2,085 x 20 x 0.90 mm Table height: 915 mm Blade speed: 35/70 m/min Cutting capacity at 90 degrees (round): 185 mm Cutting capacity at 90 degrees (square): 150 mm Cutting capacity at 90 degrees (flat): 220 x 150 mm Connection voltage: 400 V Total power requirement: 0.8 kW Machine weight: approx. 195 kg Space requirement: approx. 550 x 1,280 x 1,740 mm Metal bandsaw with stepless electronic speed control and automatic lowering. - Selector switch for hydraulically controlled or manual band arm lowering - Saw arm can be swiveled up to 60° to the right - Quick-release vice - Blade guidance with 8 ball bearings - Hydraulic saw blade tensioning with tension display and blade break protection - Including coolant device Isdpfx Aehpktredkeap - Including machine base cabinet

Stanje: rabljeno, Leto izdelave: 1998, Cutting capacity at 90 degrees: round 250 mm Cutting capacity at 90 degrees: square 240 mm Iodpeu Sbpvofx Adkjap Cutting capacity at 90 degrees: rectangular Saw band length 2965 x 27 x 0.9 mm Table height mm Band speed 37 / 76 m/min Total power requirement 1.0 kW Machine weight approx. 0.38 t Space requirements approx. 1.0 x 1.6 x 1.4 m Double mitre band saw

Stanje: novo, Cutting capacity at 90°: round 250 mm Cutting capacity at 90°: square 210 mm Cutting capacity at 90°: rectangular 290 x 210 mm Saw band length: 2,965 x 27 x 0.9 mm Table height: 940 mm Band speed: 35 / 70 m/min Total power requirement: 1.1/1.3 kW Iedpfx Ajd Iip Rsdkeap Machine weight approx. 0.35 t Required space approx. 1.3 x 0.8 x 1.5 m SPECIAL OFFER PRICE!!! Double mitre metal bandsaw, hydraulic semi-automatic, equipped with: - Hydraulic vice - Material height sensor - Cut monitoring via ammeter - Adjustable cutting pressure feed regulator - Band speed 34 / 74 m/min - Mitre cuts up to 60° left and 45° right - Patented ball-bearing turntable for easy mitre adjustment - Rapid-action vice, movable - Quick-release lever - Automatic coolant system Shipping cost share: 120 EUR

Stanje: novo, Cutting capacity at 90° (round): 250 mm Cutting capacity at 90° (square): 210 mm Iedefgyh Rjpfx Adkjap Cutting capacity at 90° (rectangular): 290 x 210 mm Saw blade length: 2,965 x 27 x 0.9 mm Table height: 940 mm Blade speed: 25 – 90 m/min Total power requirement: 1.1 / 1.3 kW Machine weight: approx. 0.35 t Required space: approx. 1.3 x 0.8 x 1.5 m SPECIAL PROMOTIONAL PRICE!!! (20347) Double miter metal band saw featuring: - Blade speed: 25 – 90 m/min - Miter cuts up to 60° left and 45° right - Ball-bearing turntable for quick miter adjustment - Sliding quick-release vise - Quick-clamping lever - Automatic coolant system

Stanje: kot nova (razstavni stroj), A demonstration metal band saw with base frame, quick-release device, and coolant system. Iaodpfx Aepgmkyjdkjp Cutting capacity Round/Rectangular/Flat 90°: 220/220x220/250x155 mm Round/Rectangular/Flat 45°: 160/160x160/160x100 mm Round/Rectangular/Flat 30°: 100/100x100/100x85 mm Cutting speed: 32/66 m/min For further technical data, please refer to the PDF document. Technical data and dimensions: subject to change/errors excepted.

Stanje: novo, 1 brand new semi-automatic horizontal bandsaw with double mitre Manufacturer: HUVEMA / Beka-Mak, Origin Turkey Model: HU 230 DGH-4 / BMSY 230 DGH Technical Data: Cutting capacity: Round 230 mm Rectangular 320 x 130 mm Square 230 mm -45° Round 180 mm Iedpfovyidmjx Adksap -45° Flat 230 x 100 mm -45° Square 150 mm +45° Round 210 mm +45° Flat 230 x 160 mm +45° Square 180 mm +60° Round 120 mm +60° Flat 120 x 100 mm +60° Square 100 mm Working height 795 mm Main drive motor power 1.0 – 1.3 kW, 400 V, 50 Hz Coolant pump motor power 0.12 kW 2 speeds 35 / 70 m/min Saw blade size 2730 x 27 x 0.9 mm Dimensions (L x W x H) 1350 x 700 x 1300 mm Weight 415 kg Accessories / Special Features: • Semi-automatic operation • Hydraulic vice, clamping via foot pedal • Double mitre cuts via swivelling frame o Material remains straight in position! o No need to turn the material for mitre cuts! o High efficiency with significant time savings! • Pre-set precise stops at 0°, 45° and 60° left and 45° right • Interchangeable work table • Hydraulic vice, laterally adjustable to left and right • Adjustable length stop, 500 mm, for repeat cuts of the same length • Arm lowering regulated steplessly by hydraulic cycle; after completing the cut, the arm returns to the starting position and the vice opens automatically • Coolant system • Swarf brush • Swivelling control panel • Electrical safety switches for blade tension and saw blade cover • Emergency stop switch • CE-compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel