Preskušanje materialov nakup rabljenega (490)

Stanje: zelo dobro (rabljeno), Weiss Type: SWT 1000 – IPX9K Weiss Spray and Splash Water Test Chamber Description: For sale is a WaterEvent SWT 1000 test chamber from Weiss Technik – ideal for standardized testing of ingress protection (IP) levels on enclosures and components. With optional features, tests according to IPX9K (high-pressure/jet water), ISO 20653, and additional standards are possible. High-pressure/steam jet nozzles for IPX9K Jet nozzles for IPX5/6, in accordance with: ISO 20653, DIN EN 60529, SAE J 575, JIS D 0203, MIL-STD 810, EN 60068-2-18, IEC 60598-1. Possible Protection Classes & Tests: Depending on configuration, the SWT system covers a wide range of tests: - Basic configuration: IPX3 / IPX4 tests (spray and splashing water from all directions). - Optional: Higher protection classes up to IPX5 / IPX6 (jet water), and, with the relevant high-pressure kit, up to IPX9/IPX9K. Tests are based on standards such as DIN EN 60529 (for IP protection classes) or ISO 20653 (e.g., for automotive or outdoor applications), depending on the intended purpose and application. Typical Applications: Typical application scenarios for this test chamber include: - Electronic devices or enclosures intended for outdoor or humid environments, e.g., outdoor lighting, control cabinets, units, panels. - Components for vehicles or machinery, especially if they are exposed to rain, splashing water, or high-pressure cleaning (e.g., construction equipment, e-bike, or vehicle parts). - Batteries or electrical components that must be tested for water protection – e.g., in the automotive industry or e-mobility. Technical Data: - Suitable protection classes: IPX3 / IPX4 - Oscillating tube radius (for IPX3/4 testing): standard 200 mm (for SWT 1000) – optionally up to 400 mm. Iedpfexzprcox Ah Aobf - Test chamber (inner compartment) dimensions: approx. 1,000 × 1,015 × 1,000 mm (W × H × D) - Operation / Control: Web panel or GUI for programming and test control. - Condition: used - Scope of delivery: (see images) (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Leto izdelave: 2000, obratovalne ure: 104.382 h, Stanje: zelo dobro (rabljeno), Vötsch Shock Test Chamber VT 7012 S2 System for Extreme Temperature Changes The temperature shock test assesses the resilience of components, devices, and other products against rapid ambient temperature fluctuations. Test specimens are subjected to swift changes in air temperature, with varying upper and lower temperature loads. Through these cyclic loads and the accelerated aging caused by temperature variation, material weaknesses can be detected. Ijdpfx Aex Exmtjh Asbf Key Features: - Vertical chamber configuration - Ball screw drive for secure guidance of the carrier basket - Basket load capacity: 50 kg (VT3 7012 S2) - All-round mesh in the basket secures the test specimens - High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber - Hot chamber can be used as a temperature storage unit, cold chamber for temperature variation testing - Minimal energy consumption - No compressed air required Manufacturer: Vötsch Model: VT 7012 S2 Type: Temperature Shock Test Chamber Test Chamber Volume: 120 l Nominal Voltage: 400 V Nominal Power: 10 kW Nominal Current: 25 A Refrigerant: R452A Cooling Unit: water-cooled Shock cooling (liquid nitrogen cooling) via customer-provided nitrogen supply External Dimensions Width: 930 mm Depth: 2115 mm Height: 1970 mm Test Chamber Dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection Class Device: IP 42 Control Panel: IP 20 Control Cabinet: IP 54 Characteristic Values for Temperature Testing in Single-Chamber Operation Temperature Range Hot chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature Deviation Over Time: ±2 K (steady state) Temperature Deviation Spatial: ±2 K (steady state, in basket) Heating Rate Hot Chamber: 11 K/min Cooling Rate Cold Chamber: K/min Heating Rate Cold Chamber: 2 K/min Cooling Rate Hot Chamber: K/min Inspection window: 355 x 355 mm Cable port: 67 mm Year of Manufacture: 2000 Operating Hours: 104,382 Weight: 1,000 kg More items – new and used – available in our shop! International shipping costs on request!

Stanje: skoraj kot novo (rabljeno), BINDER Cooled Incubator KB 240 (E5.1) with Mechanical Convection The most versatile among cooled incubators for microorganisms: BINDER KB series cooled incubators control a temperature range from -5 °C to 100 °C. With advanced programming features, the device offers a wide range of options and ensures repeatable test results. • Electronically controlled APT.line™ preheating chamber and patented DCT™ cooling system ensure temperature accuracy and repeatable results during both heating and cooling • Temperature range: -5 °C to 100 °C • MP controller with 2 programs of 10 segments each or, optionally, 1 program with 20 segments • Integrated weekly timer with real-time function • Adjustable ramp function via program editor • Digital temperature setting accurate to one tenth of a degree • Adjustable fan speed • Operating time indicator • Independent, adjustable Class 3.1 temperature safety device, providing full protection against chamber overheating, with visual and audible temperature alarm • Internal glass door Ibsdpfx Ahex A Etls Aof • RS 422 interface for APT-COM™ DataControlSystem communication software • Adjustable print intervals • 4 casters (2 with brakes) • Cable port with silicone plug Ø 30 mm, on the left side • 2 stainless steel shelves

Leto izdelave: 2025, Stanje: kot nova (razstavni stroj), Universal Testing Machine PM3 Force: 3 kN Crosshead Stroke: 520 mm Working Depth: 66 mm Overall Height: 1036 mm Weight: approx. 40 kg Displacement Resolution: 0.01 mm Test Speed: 1–500 mm/min Iedpfed R Dpusx Ah Asbf Return Speed: 700 mm/min Load Cell: 3 kN Including evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode using a numeric keypad, allowing for "quick tests" without a PC. For tests that require data storage and curve recording, our basic software offers you the functionality for control and evaluation. This enables the creation of various test sequences and the generation of a test report. You also have the option to further process the raw data in your own software applications. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Grips and Fixtures: Compression platens, bending fixtures, shear testing devices, wedge grips, scissor grips, peel grips, screw grips, pneumatic grips, and hydraulic grips.

Leto izdelave: 2013, Stanje: rabljeno, Okrogla vrtljiva miza / rotacijski pogon / varilna vrtljiva miza / pozicionirna miza Ijdpfx Aexdv N Hjh Aebf WEISS Tip: CR700 CAA Leto izdelave: 2013 Okrogla vrtljiva miza s krmilno omaro, vključno s frekvenčnim pretvornikom in Pilz PLC krmiljenjem. Premer vpenjalne plošče cca: 700 mm Premer notranjega obroča cca: 320 mm Višina brez podstavka cca: 290/320 mm Premer podstavka cca: 1600 mm Višina podstavka cca: 190 mm Maks. dinamična aksialna sila: 70.000 N Teža cca 585 kg plus podstavek Na voljo so 4 kosi teh rotacijskih pogonov Weiss. Za več podrobnosti ali nakup več rotacijskih pogonov: Prosimo povprašajte.

Stanje: dober (rabljeno), Montažni okvir za zasteklitev oken Omega 100 – izdelan po naročilu, netipičen. Za tehnične specifikacije ga je treba videti ali poklicati. Iedpsxu U N Hsfx Ah Aebf

Stanje: dober (rabljeno), Vötsch Type: VTS 7048-1 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Performance Data: With a temperature change rate of 10 K/min Test chamber dimensions: Height 950 mm x Width 800 mm x Depth 650 mm External dimensions: Height 2025 mm x Width 1000 mm x Depth 2480 mm Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.3 to ± 0.8 Spatial temperature uniformity: ± 0.5 to ± 2 Cooling rate: 10 K/min Heating rate: 10 K/min Heat compensation at -20°C: 8000 W Heat compensation at +20°C: 8000 W Test volume: 480 liters Left: 1x side port ∅ 125 mm Left: 1x side port ∅ 50 mm Right: 1x side port ∅ 125 mm Chamber is water-cooled Test chamber lighting: Halogen bulb 24 V, 50 W Electrical connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 17 kW Rated current: 30 A Refrigerant: R-404 A / R-23 Weight: approx. 1250 kg For your security as buyer, please note the following information: The following points are carried out in advance for the chambers we offer: Iodsxzgn Iepfx Ah Aebf 1. Functional check and replacement of any necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Specifications and technical data subject to change or error!) For further questions feel free to contact us by phone.

Leto izdelave: 1997, Stanje: dober (rabljeno), Vötsch VTR 7033/S Temperature Test Chamber Manufacturer: Vötsch Model: VTR 7033/S Item No.: 60885637 Temperature Chamber Temperature Range: -70°C to +180°C Mains Voltage: 400V Rated Current: 24A Rated Power: 9.5 kW Refrigerant (Climate Chamber): R 404 A Refrigerant (Deep Freezing): R 23 Year of Manufacture: 1997 TK 08 Ibodpfx Ahjuuiv Is Aef You can find more articles – both new and used – in our shop! International shipping costs upon request!

Stanje: skoraj kot novo (rabljeno), Binder BD240 / Binder BD 240 – Laboratorijski inkubator Rabljen, v dobrem stanju, preizkušen in delujoč. Iodpfx Aex A Eluoh Ajbf Inkubator z gravitacijsko konvekcijo. Specializirana naprava za inkubacijo organizmov ter za mikrobiološko ogrevanje in kondicioniranje. Temperaturno območje: od 5°C nad temperaturo okolice do 100°C. Cena za kos, na voljo je 6 kosov.

Leto izdelave: 2024, Stanje: kot nova (razstavni stroj), Universal Testing Machine PM5 Force: 5 kN Crosshead Stroke: 520 mm Ibodpfx Asd R Dqbeh Ajf Test Chamber Depth: 66 mm Overall Height: 1036 mm Weight: approx. 48 kg Displacement Resolution: 0.01 mm Test Speed: 1-500 mm / min Return Speed: 700 mm / min Load Cell: 5 kN Including evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for „quick testing“ without the need for a PC. For tests requiring data storage and curve recording, our basic software provides options for control and evaluation. This allows for generating various test procedures and creating a test report. In addition, you can further process the raw data in your own programs. Options: - Delivery & commissioning - DAkkS or in-house calibration according to DIN EN ISO 7500-1 - Grips and fixtures: Compression plates, bending fixtures, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Stanje: dober (rabljeno), Hardness tester in working condition Ibsdpfxexr Atbj Ah Aef

Stanje: zelo dobro (rabljeno), Weiss Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet This unit is used to test the ingress of water into enclosures. When used with a timer, the test cycle can be automated with adjustable test durations from 3 seconds to 30 hours. Compliant with DIN VDE 0470 Part 1 and EN 60529 for IPX3 and IPX4 protection class testing. The integrated recirculation system minimizes water consumption. Ijdpexxuytefx Ah Aobf Features - Glass door with wiper - Pneumatic drive for the oscillating tube - Adjustable oscillation angle - Interchangeable oscillating tubes - Swiveling and exchangeable nozzle holders - Adjustable and measurable water flow rate - Test duration control Mechanical load data - Max. test load (distributed evenly): - Permissible test specimen weight (total for test tray): 25 kg - Spray radius: 200 mm / 400 mm Data for IP protection class tests - Oscillation speed: approx. 60°/s - Oscillation angle IPX3: approx. ±60° - Oscillation angle IPX4: approx. ±180° -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1,900 mm - External dimensions (D x W x H): approx. 1000 x 1000 x 1,900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operational data - Voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 1.5 kW - Rated current: 5.0 A - Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and errors excepted!) If you have any further questions, we would be happy to answer them by phone.

Leto izdelave: 2002, Stanje: dober (rabljeno), Vötsch VT 4400/S Temperature Test Chamber Manufacturer: Vötsch Model: Vötsch VT 4400/S Specifications for Temperature Testing Temperature range: -40°C to +120°C Temperature deviation at steady state: Temporal ± 1 K Spatial ± 2.5 K Wall distance of measuring points: 150 mm Temperature change rate according to DIN 50011, Part 12: 3 K/min Exterior panels: Galvanized steel sheet / plastic-coated Interior panels: Stainless steel Insulation: 120 mm, double-layer Door hinge: Double-wing door Floor: Smooth stainless steel Floor load capacity: min. 1000 N/m² Point load: 750 N Air circulation: Vertical Temperature control: Direct Cooling via refrigeration unit Heating with electric heating elements Refrigeration unit: Two-stage cascade, water-cooled Refrigerant Low Temp: R 404 A Refrigerant Ultra-Low Temp: R 23 Lighting: 2 x 20 W halogen Control: Microprocessor-controlled digital program controller Temperature sensor: Pt 100, DIN IEC 751, Class B Connections Nominal voltage: 400 V ± 10 %, 3/N, 50 Hz Ijdpfx Asuuh Trsh Aebf Nominal power: 27 kW Nominal current: 47 A Protection rating: IP 20 Supply: R1* Return: R1* Water pressure (overpressure): 3 to 6 bar Water consumption: max. 3 m³/h Water inlet temperature: max. 18 °C Cleaning/condensate drain: R1* External dimensions: W 3700 x D 1550 x H 2100 mm Chamber: W 3000 x D 1250 x H 1610 mm TK-12 Find more items – both new and used – in our shop! International shipping cost on request!

Leto izdelave: 2025, Stanje: kot nova (razstavni stroj), Universal Testing Machine PM10 Force: 10 kN Crosshead travel: 700 mm Test space: 400 mm Overall height: 1230 mm Weight: approx. 85 kg Travel resolution: 0.01 mm Test speed: 1–500 mm/min Return speed: 700 mm/min Load cell: 10 kN including evaluation electronics and basic software. Ibjdod R Dpmspfx Ah Aef Our testing machines can be operated stand-alone via a numeric keypad, allowing for “quick tests” to be performed without a PC. For tests requiring data storage and curve recording, our basic software enables precise control and evaluation. The software allows the generation of various test routines and the creation of test reports. Furthermore, you have the option to process raw data in your own applications. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Grips & fixtures: Compression plates, bending devices, shear devices, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Stanje: dober (rabljeno), LECO C230 CARBON ANALYZER Carbon Determination C230 The LECO C230 Carbon Analyzer is a microprocessor-based, software-controlled instrument for measuring the carbon and sulfur content in metals, ores, ceramics, and other inorganic materials. The C230 utilizes an induction furnace and measures carbon by infrared absorption. The infrared (IR) source consists of a nichrome wire heated by resistance to 8500°C. The IR source emits visible energy as well as all wavelengths of the infrared spectrum. Carbon dioxide can be used for descriptive purposes; the same principle applies for sulfur detection. Carbon dioxide absorbs IR energy at a specific wavelength within the IR spectrum. Energy from the IR source is absorbed as the gas flows through the cell, thereby preventing it from reaching the IR detector. An IR cell is used both for reference and for measurement. The total carbon, in the form of carbon dioxide, is continuously and simultaneously detected. The initial reference level or baseline for the detector is established by passing oxygen through the cell to purge residual atmospheric gases. Technical Data: Required Gases: Carrier gas: Oxygen 99.5% pure, 40 psi Pneumatic gas: Compressed air, nitrogen, or argon, 40 psi (2.76 bar), source must be oil- and water-free Gas Flow (based on nominal analysis time): Measurement: 3 liters per analysis Pneumatic: 1 liter per analysis Regulators: Isdpsxxaxujfx Ah Aobf Oxygen: 501-291 O₂ pressure regulator Compressed air: 766-036 compressed air regulator Inert gas: 764-216 inert gas regulator Furnace: Induction, 18 MHz, 2.2 kW Data Transfer: Included Data Storage: Without PC: 10 sample weights, 50 responses, 5 methods Without PC: Internal memory /optional external display Without PC: Liquid crystal (16 x 26 characters) Power Requirement: Determinator: 230 V, ±10%, 50/60 Hz, single-phase, max. 15 amperes Operating current: 12 A Standby current: 4 A Condition: used Scope of delivery: (See image) (Changes and errors in technical data, specifications reserved!) Should you have further questions, we will be happy to answer them by phone.

Leto izdelave: 1996, Stanje: zelo dobro (rabljeno), Vötsch VSKZ 04/120/S walk-in climate test chamber Manufacturer: Vötsch Model: VSKZ 04/120/S Temperature range: -40°C to +120°C Mains voltage: 400V Rated current: 95A Rated power: 56 kW Refrigerant: R 404 A Year of manufacture: 1996 Iodpsuuigysfx Ah Ajbf External dimensions: W 2850 x D 4100 x H 3080 mm SO-01 You will find more articles – new and used – in our shop! International shipping costs on request!

Stanje: zelo dobro (rabljeno), Vötsch Type: VTS 7060-5 Halogen bulb 24V, 50W Vötsch temperature test chamber with color touch panel and S!MPAT Temperature range: -70°C to +180°C, water-cooled Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate (cooling): 6 K/min Temperature change rate (heating): 6 K/min Test chamber dimensions: Width 800 mm x Depth 800 mm x Height 950 mm External dimensions: Width 1000 mm x Depth 1750 mm x Height 2005 mm Observation window: Width 300 mm x Height 540 mm Test chamber volume: 600 liters Sound level at 1 m distance (free-field measurement): < 69 dB(A) Left-side port: 50 mm diameter Right-side ports: 2 x 125 mm diameter Rated voltage: 3/N/PE AC, 400 V ±10 %, 50 Hz Rated power: 16 kW Rated current: 30 A Main fuse (on-site): 29 A slow-blow The chamber is water-cooled Refrigerants: R-404A and R 23 Weight: approx. 675 kg For your safety as the buyer, please note the following information! The following steps are carried out in advance on our offered chambers: 1. Functional inspection and replacement of necessary components 2. New fill with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored with calibrated instruments. Condition: used Isdpfsxw Uqpjx Ah Ajbf Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) If you have further questions, we are happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Vötsch VC 0150 Climate Test Chamber 0°C – +90°C Manufacturer: Vötsch Model: VC 0150 Climate Test Chamber Voltage: 230 V Rated Power: 1.5 kW Volume: 1,540 litres Temperature Range: 0°C to +90°C Humidity: 10% to 98% Refrigerant: R134a Dimensions: W 950 x D 1100 x H 1475 mm Microprocessor Controller List price: €19,500 KK-09 Isdpjuuikfjfx Ah Aebf You will find further new and used items in our shop! International shipping costs on request!

Stanje: zelo dobro (rabljeno), TIRA Model: TCC 7120 Temperature Range: -75°C to +180°C Air-cooled condenser Temperature stability (over time and in the centre of the usable space): ±0.1°C to ±0.3°C Maximum temperature change rate: Heating: 4°C/min Cooling: 3°C/min Humidity range: 10% to 98% relative humidity Humidity stability over time: ±1% to ±3% Dew point range for long-term tests: +2°C to +94°C Dew point range for short-term tests: -20°C to +2°C External dimensions (LxWxH): 1,320 x 2,235 x 2,137 mm Test chamber dimensions (LxWxH): 1,000 x 1,130 x 1,020 mm Test chamber volume: approx. 1,152 litres Max. load per shelf: 50 kg Maximum floor load in test chamber: 100 kg Refrigerants: R404A and R23 Power supply: 400V +6%/-10% / 50Hz / 3P+N+PE Nominal power: 10.2 kW, max. 17.5 kW Nominal current: 19.5 A, max. 32.0 A Sound level: approx. 80 dB(A) Weight: 1,180 kg Important safety information for buyers: The following measures are carried out on our offered chambers in advance: Ibjdpfx Aowfddwoh Ajf 1. Functional check and replacement of necessary components 2. If needed, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See image) (Technical data subject to change and errors excepted!) If you have further questions, please do not hesitate to contact us by phone.

Stanje: dober (rabljeno), Vötsch VCS 4100 Climate Test Chamber -40 °C to +180 °C Ijdpfxeuuiygj Ah Aebf Manufacturer: Vötsch Model: VCS 4100 Temperature range: -40 °C to +180 °C Mains voltage: 400 V Rated current: 17 A Rated power: 11 kW Refrigerant: R404A KK-07 You can find more items – new and used – in our shop! International shipping costs on request!

Stanje: zelo dobro (rabljeno), CTS Type: T-40/600 /011232 CTS Temperature Test Chamber, Water-Cooled Including metal supports to increase floor load capacity. Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 1900 mm, Width approx. 1050 mm, Depth approx. 1850 mm Ijdpfxjwfdnij Ah Aebf Temperature operating range: Temperature range: -40 to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R-404A Weight: 550 kg For your safety as a buyer, please note the following information: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and specifications!) For further questions, please feel free to call us.

Stanje: zelo dobro (rabljeno), RS-Simulators RS-Simulators ST2K 320/70D Water-cooled Thermal Shock Test System For sale is a high-performance thermal shock testing system, model ST2K 320/70D. This system is ideal for standard-compliant thermal shock testing in accordance with DIN EN 60068‑2‑14, including optional humidity testing in the upper test chamber. With its two temperature chambers (–70 °C to +240 °C) and automatic specimen basket transfer, this system offers the perfect solution for component, material, and reliability testing in industry, research, and quality assurance. Main Technical Data: Temperature Ranges Upper test chamber: +40 °C to +240 °C Ibjdpfx Ahswx Ip De Ajf Temporal deviation: ±0.8 K (per DIN 50011, empty chamber) Lower test chamber: –70 °C to +240 °C Temporal deviation: ±0.8 K (per DIN 50011, empty chamber) Humidity Testing (optional) – Upper test chamber Temperature: +40 °C to +90 °C Relative humidity: 20% to 98% r.H. (±2–5%) Specimen Basket Transfer: Vertical movement, < 10 seconds transfer time Power Supply: Total rating: 16 kVA Current consumption: 32 A Main fuse: 3× 35 A slow-blow Power connection: 3× 400 V / N / PE / 50 Hz Main cable: 5× 16 mm² Water & Compressed Air Connections: Cooling water inlet: G ¾", approx. 3 bar, max. 10 bar / max. 15 °C Cooling water requirement: max. 1.4 m³/h Cooling water return: G ¾", max. 25.2 °C Condensate drains: 2× G ½", 1× G ¼", non-pressurized Deionized water inlet: G ⅜", approx. 3 bar, max. 6 bar Compressed air connection: Quick coupling NW 7.2 (G ¼"), min. 4 bar, max. 10 bar Dimensions & Weight: Specimen basket internal dimensions (Type ST2K 320) Internal: Width approx. 430 mm, Height approx. 470 mm, Depth approx. 700 mm External: Width approx. 1100 mm, Height approx. 2300 mm, Depth approx. 2300 mm Weight: approx. 1150 kg Other Technical Data Sound level: approx. 60 dB(A) at 1 m distance (free field) Refrigerants: R-404A: approx. 2.5 kg (GWP 3,800, limit 0.48 kg/m³) R-23: approx. 0.8 kg (GWP 12,100, limit 0.68 kg/m³) Permissible operating environment: Temperature: +12 °C to +30 °C Humidity: 25%–75% r.H. For your safety as a buyer, please note the following: The following points are performed in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in technical data and information excepted!) Further questions can gladly be answered by phone.

Stanje: zelo dobro (rabljeno), Type: VC³ 7034 Heraeus Vötsch Climate Test Chamber with Humidity (Air-cooled) Test Chamber Dimensions: Width 580 mm x Depth 765 mm x Height 750 mm External Dimensions: Width 780 mm x Depth 1758 mm x Height 1800 mm Technical Data for Temperature Tests: Temperature range: -70°C to +180°C time deviation: ±0.1 to ±0.5 K spatial deviation: ±0.5 to ±1.5 K Temperature change rate according to IEC 60068-3-5 Heating: 3.0 K/min Cooling: 3.0 K/min Technical Data for Climatic Tests: Temperature range: -70°C to +180°C Temperature deviation in stabilised state, according to IEC 60068-3-5 depending on test chamber temperature time deviation: ±0.1 to ±0.3 K spatial deviation: ±0.5 to ±1 K Humidity range: 10% to 98% RH Electrical Connection: Ibodpfxexfh Spj Ah Aof Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 4.9 kW Rated current: 16 A Protection: 16 A slow-blow, customer side Refrigerant: R-404A/R23 Test chamber volume: approx. 335 litres Weight: approx. 515 kg net Buyer information for your safety! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a documented trial run. Condition: used Scope of delivery: (See picture) (Subject to technical changes and errors. All specifications are subject to confirmation!) We are happy to answer further questions by phone.

Stanje: zelo dobro (rabljeno), Weiss Model: SC/KWT 450 Salt Spray Chamber Technical data: Test chamber capacity: 450 liters Ijdpfsw Hz Trsx Ah Asbf Maximum load: 100 kg Brine reservoir: 180 liters External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Internal chamber dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Applications: Corrosion testing: Salt spray test: ambient temperature up to +50°C Condensation water test: ambient temperature up to +45°C Humidifier: +75°C Temperature stability Temporal temperature deviation: ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.0 kW Rated current: 8.5 A Combination: Salt spray test SS: DIN 50021 Condensation water test KFW: DIN 50017 Standard climate (ventilation): DIN 50014 Weight: 180 kg Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Weiss Temperature Shock Test Chamber We are offering a temperature shock test chamber. Weiss Temperature Shock Test Chamber, air-cooled (The compressor has been replaced!) Specification: Temperature range, hot chamber: +60°C to +220°C Temperature range, cold chamber: -10°C to -80°C Changeover hot/cold chamber: 10 s Temperature constancy: ±1 K Dimensions and further data: External dimensions: Height 1990 mm Width (without and with swing arm): without approx. 1820 mm, with approx. 1915 mm Depth (without and with test chamber door): without approx. 900 mm, with approx. 1155 mm Basket (test chamber) dimensions: Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 litres Ibedpjk E Htysfx Ah Ajf Maximum load of test chamber: 20 kg Maximum load on test chamber floor: 20 kg Cooling water pressure: min. 2 ... max. 6 bar Max. pre-fuse: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of device: approx. 65 dB(A) Cascade cooling, water-cooled Electrical connection: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW Rated current: 26.0 A Refrigerants: R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used Scope of delivery: (see picture) (Technical data and information are subject to change and errors!) If you have any further questions, we are happy to answer them by phone.