Prehodna klimatska preizkusna komora, klimatska komora

Vötsch VSKZ 04/120/S

Leto izdelave: 2018, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: H3000TM, Universal Testing Machine Ncjdpfxjt Rg H Ae Agxor H3000TM Made in Germany Crosshead travel: 520 mm Working space depth: 66 mm Total height: 1010 mm Weight: 45 kg Test speed: 1 to 500 mm/min Return speed: 500 mm/min Travel resolution: 0.01 mm We offer a very large selection of clamping tools: screw clamps, wedge grips, pneumatic and hydraulic grips. Pressure plates, bending fixtures, friction coefficient fixtures, and much more. Extensometers, long-travel transducers, clip-on gauges, climate chambers. Load cells (selectable): 50 N, 100 N, 200 N, 500 N, 1000 N, 2000 N, or 3000 N Includes Hess software for Windows 8, 9, 10, or 11 for universal test procedures; simple tests can also be performed without a PC. Includes one 5 kN SP 56g screw clamp with pyramid or rubber jaws, 30x50 mm. Factory calibration certificate with DAkkS-calibrated measuring equipment. Calibration in both tension and compression in 10 steps. The H3000TM series universal testing machine is a single-spindle machine with a robust construction made from aluminium and V2A stainless steel, featuring ball screw drives, linear ball bearings, and toothed belt drive. The bellows cover protects the spindle and guides. The testing machine is microprocessor-controlled and features a membrane keypad. The two-line LCD display shows both force and travel. The testing machine can be used either as a standalone unit or with a PC via USB interface. Travel measurement is by encoder, with 0.01 mm visible resolution on the LCD (internal resolution 0.0001 mm). The machine comes with a standard load cell with 0.03% linearity and corresponding calibration. Optionally, a second channel for an additional load cell or displacement transducer can be added. The universal testing machine is available with two different travel lengths, 500 mm or 1200 mm (measured without load cell and test fixture). Scope of delivery: One load cell of your choice (50 N, 100 N, 200 N, 500 N, 1000 N, 2000 N, or 3000 N), certificate, 220 V power cable, USB cable, manual, and CE declaration of conformity. Load Cell 3000N Measuring range: 1–3000 N (tension and compression), nominal 2 mV/V output signal Overload protection: +/-100% Linearity: +/-0.05% Hysteresis: +/-0.03% Repeatability: +/-0.02% Including 1.5 m connection cable and calibration certificate.

Stanje: pripravljen za uporabo (rabljen), Varian 640-IR FT-IR Spectrometer The Varian 640-IR is a high-performance spectrometer that makes FT-IR spectroscopy straightforward. With a range of unique, user-friendly hardware and software features, you can quickly become productive. Spectral range: 7900 – 375 cm-1 Spectral resolution of at least 0.25 cm-1 Signal-to-noise ratio (number of scans: 100, with standard configuration and spectral resolution of 4 cm-1): at least 10,000 cm-1 Level of pseudodiffuse light does not exceed 0.1% Integration time: 5 s Monochromator: High-speed Cerny-Turner No software included Description adopted as provided. You are welcome to arrange a viewing appointment. We are happy to organize cost-effective shipping for you. You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Ncedpfxory Tqrs Agxer Visit our shop to view our other offers. All company names and trademarks mentioned are the property of their respective owners and are used solely for identification and product description purposes. Deviations from technical specifications and errors in the article description may occur and are reserved.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Novo naprava, zaloga, takoj dobavljivo - Prostornina: 18.000 litrov - Tmax: 450°C - Notranje mere D x Š x V: 4100 x 2100 x 2100 mm - Zunanje mere (z vodili) D 9970 x Š 3060 x V (z dvižnimi vrati) 6110 mm Nodpfx Asu Hma Nogxecr - Regulacijska naprava Eurotherm Nanodac - Stabilnost temperature (pri nazivni temperaturi brez tovora): ±5 °C - Samodejna dovodna in izpušna loputa - Električna dvižna vrata - Električno gnani voziček - Moč: 247 ±9% kW - 400 V, 50 Hz - Dokumentacija, CE izjavo Montažo, zagon in uvajanje vaših zaposlenih vam z veseljem ponudimo. Obrnite se na nas! Nudimo nove in rabljene industrijske peči. Ogled v naši skladiščni hali po dogovoru! Peč, peči, žarilna peč, žgalna peč, kalilna peč, toplotna peč, popuščalna peč, sušilna peč, industrijska peč.

Stanje: dober (rabljeno), Weiss Model: SC/KWT 450 Salt Spray Chamber Technical Data: Test Chamber Volume: 450 liters Max. Load Capacity: 100 kg Brine Reservoir: 180 liters External Dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Test Chamber Dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Applications: Corrosion Testing: Salt Spray Test: Chamber temp. up to +50°C Condensation Water Test: Chamber temp. up to +45°C Humidification: +75°C Temperature Stability Njdpfx Agoudvg Rjxscr The temporal temperature deviation is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.0 kW Rated current: 8.5 A Combinations: Salt Spray Test SS: DIN 50021 Condensation Water Test KFW: DIN 50017 Standard Climate (Ventilation): DIN 50014 Weight: 180 kg Condition: used Scope of delivery: (see picture) (Specifications and details subject to change and correction!) For further questions, please feel free to contact us by phone.

Leto izdelave: 2024, obratovalne ure: 4 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: H2,5TMNI, Universal Testing Machine H 2.5 TMNI L Please always include your email address. Mechanical Design: Single-spindle universal testing machine with backlash-free recirculating ball screw in C-frame construction, equipped with spindle protection and brushless drive motor, Fmax = 2.5 kN. 1 Test Space up to Rated Load: Working depth: 105 mm Maximum test stroke without test tools, adapters, and KMZ: 1375 mm Maximum test area height (between lower fixed and movable crosshead) without test tools, adapters, and KMZ: 1375 mm Travel Speeds: Njdpfx Agjmdn Trjxecr Testing speed 0.005 - 1200 mm/min up to rated load Return speed 1200 mm/min Force Measurement: Measurement range depending on the force transducer used: 0.4 - 100% of the rated load, class 1 (optional class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Resolution of force measurement depending on integration time between: +/-160,000 and +/-900,000 digits. The machine is delivered with a factory test certificate. If a factory or DAkkS calibration at the installation site is required by the customer, this service is subject to an additional charge. Crosshead Travel Measurement: Incremental quadrature input with encoder monitoring, storage of crosshead position. Resolution of crosshead travel measurement:

Stanje: zelo dobro (rabljeno), Weiss Type: WK 27'/50-150 Climatic Chamber Water-Cooled Nodpfx Aovx Nfbegxjcr Technical Data: Test Chamber Designation: WK 27'/50-150 External Dimensions: Height 3500 mm, Width 3400 mm, Depth 6000 mm Control Cabinet Dimensions: Height 2000 mm, Width 2400 mm, Depth 400 mm Internal Dimensions: Height 3000 mm, Width 3000 mm, Depth 3000 mm Floor Load Capacity: 30000 N/m² (Surface Load) Test Chamber Volume: Approx. 27,000 Litres Sample Mass: 1000 kg Cooling/Heating Operation: -50°C to 150°C Heating Rate: 1.0 K/min Cooling Rate: 1.0 K/min Temperature Stability: ±0.3 to 1.0 K (Over Time) Temperature Stability: ±0.1 to 0.5 K (Over Time) Climatic Operation: 10 – 90°C Humidity: 10...98% rH Temperature Stability: ±0.1 to 0.5 K (Over Time) Dew Point Range: +4 to +84°C 3/N / PE AC 400 V ±10% 50 Hz Weight: 7000 kg Refrigerants: R23 and R404A With additional base plates to increase floor load capacity Important Safety Information for Buyers: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, monitored with calibrated devices. Condition: used Scope of delivery: (see photo) (Changes and errors in technical data and specifications reserved!) Further questions gladly answered by phone.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, obratovalne ure: 4.108 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 591343, vpenjalna sila: 1.550 kN, For sale is an injection moulding machine from Ferromatik, model K-TEC 155 S / 2F. The machine is in excellent condition. Please note the low operating hours—only 4,108 h. Technical data: Year of manufacture: 2005 Clamping force: 1,550 kN Tie bar spacing (H x V): 500 x 500 [560 x 560] mm Mould opening stroke: 650 mm Max. platen distance: 950 [1150] mm Mould installation height: 300 [500] mm Opening force: 86 kN Screw diameter 1: 50 mm Screw diameter 2: 40 mm Max. injection pressure: 1,568 bar Nodpfxet Tdpts Agxecr Max. shot volume: 314 cm³ Electrical connection: 40 kW Machine dimensions (L x W x H): 5,500 x 1,700 x 2,400 mm Weight: 7,800 kg Oil tank capacity: 480 l Optional: Loading onto truck and transport throughout Europe can be arranged for an additional charge. Prices plus VAT. Viewing possible by appointment. Please contact us—our team will be pleased to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality, yet affordable metalworking machine for your production? Or do you wish to sell your machine? For further information or to get in touch, visit our website.

Stanje: zelo dobro (rabljeno), Here we offer you a walk-in climate chamber. Manufacturer: RS-Simulatoren, water-cooled The chamber can be disassembled into 3 parts for transport (bolted design) Temperature range: -30°C to +100°C Ncedpfjqw U Aaex Agxor Refrigerants: 20 kg R-404A + 20 kg R-452A External dimensions: approx. width 3920 mm, depth 7350 mm, height 2600 mm Test chamber dimensions: approx. width 3500 mm, depth 5400 mm, height 2110 mm Electrical data: 68 kW nominal power Voltage: 3x400V/PE Current: 135A Type: KKM 40 / 45 S Further technical details will follow! For your safety as buyer, please note the following information: The following steps are carried out in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. After passing all checks, the chambers undergo a documented test run. Condition: used Scope of delivery: (see pictures) (We reserve the right to make changes and corrections to the technical data!) Feel free to contact us by phone for further questions.

Stanje: zelo dobro (rabljeno), Feutron Model: 3702/06 Climate Test Chamber, Water-Cooled Technical Data: Test Chamber Nominal Volume: 2.0 m³ Dimensions: Outer test chamber with humidifier console Width: 2970 mm / Height: 2370 mm / Depth: 1530 mm Rear wall Minimum installation dimensions: Width 2970 mm / Height 2390 mm / Depth 1550 mm Test Chamber (Inner): Width 2000 mm / Height 1000 mm / Depth 1000 mm Door: double-leaf, clear opening width 2000 mm / height 1000 mm Viewing windows, heated, 2 pcs: Width 500 mm / Height 600 mm Cable port, 1 pc. left side wall ∅ 75 mm Temperature range: -40...100°C Climatic range: 10...95°C Temperature variation over time ≤ ±0.5...±1.0 ΔN/K Rate of temperature change, measured in air supply without load: Cooling up to 2.0 average K/min Heating up to 2.0 average K/min Humidity range: 10...95 % rH Humidity fluctuation over time ≤ ±3.0 % rH Dew point range, temporarily: -5...95°C Refrigeration system: water-cooled, semi-hermetic Bitzer unit Refrigerant: R507 (Μ-K1) Climate and desiccant cooler, air-cooled / hermetic unit Refrigerant: R134a (Μ.KK) Power supply: Electrical connection: 400V 3/N/PE AC, 50Hz Power plug: CEE 5-pin, 32 A, with 5.0 m cable Maximum simultaneous power demand: 10.0 kW Nsdpsk E Hnqofx Agxocr Power line fuse: 3x 25, Char. C A Protection class: IP20 Weight: 1300 kg Condition: used Scope of delivery: (see picture) (Technical data and specifications may be subject to changes and errors!) For further questions, we are happy to assist you by phone.

Stanje: rabljeno, Bruker Type: Tensor 27 Ncsdpfx Agovwcikoxjr IR Spectrometer Complete sample flexibility. Thanks to the improved QuickLock™ mechanism and locking button on the front, even bulky accessories can be installed quickly and, above all, safely. Additionally, the INVENIO can be equipped with three software-controlled beam outputs for a wide variety of external modules. FPA micro- and macro-imaging Variable external sample chamber (left or right) for customized experiments Fiber optic coupling to fiber probes for liquids and solids Integrating sphere Autosampler for liquids High-throughput analysis module HTS-XT Reflection unit for air-water phase boundary Much more! Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and errors!) For further questions, feel free to contact us by phone.