Varilna vrtljiva miza, pozicijska miza

WEISS CR700CAA

Leto izdelave: 1994, Stanje: dober (rabljeno), Rivo bandsaw sharpening machine Model GA 250 Ffedpfxjpl D Hxo Afljt

Leto izdelave: 2022, Stanje: novo, Lifting capacity: 10,000 kg Rotational speed: 0.03–1.6 rpm Faceplate diameter: 1,500 mm, extendable to 2,500 mm Fjdpfjfxgp Usx Afleft Welding current transmission: 800 A

Leto izdelave: 1990, Stanje: dober (rabljeno), Used side loader Kalmar, Ffjdjh Et E Nepfx Aflet The machine has been well maintained. For further details, please refer to the pictures.

Stanje: rabljeno, Leto izdelave: 2001, Wood processing dimensions: Infeed lengths min/max: 500 - 6500 mm Full optimization up to max: 1500 mm Infeed widths min/max: 40 - 300 mm Infeed thicknesses min/max: 15 - 120 mm Max. wood cross-sections: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw min: 510 – 2800 mm Special application: Cutting blocks, min/max length: 100 – 200 mm (Note: Multiple block lengths during sorting; blocks are conveyed to the end of the sorting line and fall into customer-supplied mesh boxes) Cutting/trim tolerance: +/- 0.8 – 1.5 mm (depending on timber quality with minimal resin content and uniform surface. Tolerance up to 1 m fixed length; maximum tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm Wood curvature in all directions: max. 10 mm per meter length Wood species: Softwood or hardwood System performance: Feed speed, steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 s To determine actual daily output, an efficiency factor dependent on the customer’s production conditions must be applied. Working height infeed and saw: 900 mm (to be placed on customer-side platform; saw requires concrete base) Sorting working height: 2000 mm Connection data: Total electrical connection load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Voltage fluctuations max. 5 % Air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Support roller without drive, front-facing sheets table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera to detect error markings Pos. 4: Automatic, contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with integrated waste chute, incl. equipment package for large wood cross-sections Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and system control Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Ffjdpfow Sy T Hsx Aflet Pos. 6: Outfeed conveyor belt as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on outfeed conveyor Location: Nattheim

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: R14101358 (Roboter) / E14130752 (Steuerschrank), skupna masa: 1.270 kg, nosilnost: 250 kg, doseg roke: 2.655 mm, proizvajalec krmilnikov: FANUC, model krmilnika: R-30iB, vhodna napetost: 400 V, FANUC industrial robot R-2000iB 250F, Year of manufacture: 01.2014 (control cabinet 12.2013). Axes: 6, Reach: 2,655 mm, Payload: 250 kg. Dimensions: Length 200 cm, Width 110 cm, Height 185 cm. Control cabinet: FANUC R-30iB. Complete with robot arm, connection cables, teach pendant, and controller. (For further details, see nameplates). IPendant A05B-2255-C101#EGN Fodpfx Afjtk N E Tslsft We also offer accessories such as pedestals, spot welding guns, rotary tables, and much more. We are happy to demonstrate the robot for you. Packaging and loading included.

Stanje: zelo dobro (rabljeno), Motor-driven rotary-sliding table Fedpfjif Rlbex Aflsft Infinitely variable rotary table (indexing accuracy 0.001°) Manufacturer: Rückle Type: PKT 6 Clamping surface: 1600 mm x 1600 mm Longitudinal travel: W-axis = 1000 mm Condition: Very good (used)

Stanje: novo, Leto izdelave: 2026, Učinkovito nanašanje lepila v pohištveni industriji v izvrtine za ključe in utore na hrbtiščih, prav tako lepljenje pri okvirni, okenski in vratni proizvodnji v izvrtine za ključe, utorne in čepaste spoje. Fedpfx Afjhnddzeloft Kratek opis: • Univerzalna naprava za nanos lepila • Prihranek časa – enostavno – čisto • Različne šobe in nastavki • Mobilna naprava Univerzalno področje uporabe: • Lepljenje izvrtin za ključe • Lepljenje utorov za hrbtišča • Lepljenje robnih površin • Lepljenje površin na splošno • Lepljenje utornih in čepastih spojev • Lepljenje delov pri omarah, korpusih, predalih • Lepljenje delov pri okvirjih • Lepljenje delov pri oknih in vratih • Predelava ploščatih in masivnih lesenih komponent

Stanje: novo, Manufacturer: Flender Model: B4 FH 10 A Power: 11 kW Gear ratio: 387.59:1 Fsdog Stz Uepfx Afljft Input/output speed: 1,500 / 3.87 rpm Bolt circle diameter (input): 300 mm Bolt circle diameter (output): 420 mm Weight: 1,140 kg

Leto izdelave: 2021, Stanje: novo, Cantilever racking, double-sided, 4.16m height, 1.20m arms, 750kg per arm – NEW: Price ex works, loading included! 1 racking unit with 4 uprights: €3,420 (net)! Fedsfivhfopfx Afleft Transport price within Germany (excluding islands): €550 (net)! You can also build longer or shorter racking units by omitting or purchasing additional frames (or by changing the bay spacing); this example with 4 frames is simply the standard racking solution! A cantilever racking system, hot-dip galvanized, consisting of: 4 double-sided uprights approx. 4.16 m high, hot-dip galvanized IPE 160 / 100 profile with 2x3 adjustable arms of 1.20 m length per upright, 750kg load capacity per arm with bracing approx. 1.30 m Double-sided uprights approx. 4160 mm high, hot-dip galvanized Base and arm depth 1200 mm, with 3 height-adjustable arms per side Load capacity at load center 600 mm: 750kg per arm / 2,250kg per upright side With horizontal and diagonal bracing, bay spacing e = 1300 mm; standard is 1.30m Other standard bay lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a length of 1.50m an additional surcharge applies to the listed price! Special measurements (other bay spacings) are available upon request, incurring a surcharge and longer delivery time as they need to be custom manufactured! If no different bay spacing is specified, we supply the racking with a bay spacing of 1.30m. In this case, the length of a rack row with 4 uprights (3 bays) is approx. 4m. Delivered with all bolts and nuts (shipped within Germany directly by Würth), without floor anchors. Other configurations (upright height, arm lengths, arm types etc.) available! Please contact us!

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 700 mm, pogonska enota žage: 15.000 W, moč servomotorja: 11.000 W, Stroj popolnoma obnovljen / kot nov z novo električno napeljavo nov Siemens S7 krmilni sistem Zaključek po naročilu Avtomatska kapovalka z zaznavanjem krede črte Leseni prerezi 430x30 / 300x150 / 200x200 DIMTER OptiCut 602 R Ffodpfxev Diy Ae Aflot Premer žaginega lista 650/700 mm Podajalna hitrost 120 m/min Motor žage 15 kW Servo pogon SEW 11,00 kW s pretvornikom