Preskušanje materialov nakup rabljenega (489)

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, številka stroja/vozila: 0032703, Dodatna oprema: - Primerjalna plošča 63,3 HRC Hfsdpfx Ajx E U U Hjb Tsr - Primerjalna plošča 58,5 HR30N - Preizkusne uteži 150, 100, 60, 45, 30 kgf - Prednapetostna utež - V-nakovalo - Libela - Diamantna penetracijska konica - Jeklena kroglasta konica 1/8" - Rezervne jeklene krogle 1/8" - Zaščitni pokrov proti prahu - Navodila za uporabo Diamantna penetracijska konica je rahlo poškodovana tik pod vrhom (majhen izkrhek – glej slike)

Stanje: rabljeno, Pozicija je sestavljena iz: (1) rotacijskega viskozimetra Hedpfex E Ubaox Ab Tofr

Leto izdelave: 1970, Stanje: rabljeno, Tehnične podrobnosti: Pomik X: - mm Pomik Y: - mm Pomik Z: - mm Teža obdelovanca: 800 kg Teža stroja pribl.: 0,75 kg Dimenzije stroja pribl. D x Š x V: 1,2 x 0,8 x 2,0 m Zarezna udarna žilavost je merilo za to, kako odporen je material na nenadne udarne obremenitve, zlasti če ima predhodno narejeni zarez. Hjdpexu Dwyofx Ab Tofr Uporablja se predvsem pri kovinah za ocenjevanje lomne žilavosti pod dinamičnimi obremenitvami.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, skupna širina: 2.350 mm, skupna višina: 2.420 mm, skupna dolžina: 3.600 mm, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 400 V, moč: 1,6 kW (2,18 KM), raven hrupa: 75 dB, Splošno: Natančna konfokalna merilna postaja za optično merjenje višine in strukture. Opremljena s konfokalnim senzorjem PD562 in merilno kamero PD563. Sistem je namenjen visokoločljivostnemu merjenju površin in geometrije. Hfedpfjx Ap I Hsx Ab Tjr

Stanje: rabljeno, SincoTec Type: POWER FLOW BIAXIAL 125/150 kN ±4000 Nm SincoTec POWER FLOW BIAXIAL 125/150 kN – ±4000 Nm Servo-hydraulic Test Stand Description: For sale is a servo-hydraulic biaxial test stand, SincoTec POWER FLOW BIAXIAL. The system is from industrial use and was fully operational until decommissioning. Service and maintenance have been carried out professionally. Comprehensive technical documentation (operation, assembly, and circuit diagrams) is available. The test stand is suitable for tensile/compression tests, torsion tests, as well as combined load testing on components and assemblies, e.g., for fatigue, durability, and functional tests. Main Technical Data – Test Stand: - Maximum test force (design): up to ±150 kN - Typical operating specification: 125 kN - Max. torque (torsion): ±4,000 Nm - Max. linear actuator stroke: ±75 mm - Max. rotation angle: ±50° - Measurement accuracy: Class 1 (DIN EN 10002-3) Test Stand Dimensions: - Overall height: approx. 3,430 mm - Width: approx. 1,480 mm - Depth: approx. 1,180 mm - Max. clamping device weight: 250 kg Hydraulic Power Unit (included) - Drive power: approx. 152 kW - Flow rate: approx. 260 l/min - Operating pressure: up to 280 bar - Hydraulic oil: HLP ISO VG 46 - Tank volume: approx. 1,500 liters Power Unit Dimensions: - Length: approx. 2,714 mm - Width: approx. 1,820 mm - Height: approx. 2,085 mm Electrical Data: Control Cabinet / Test Stand - 400 V / 50 Hz - Connection: CEE 5-pin - Fuse: 16 A Hedpfxox H Rtnj Ab Tofr Power Unit - 400 V / 50 Hz three-phase - Hard-wired connection - Fuse: approx. 160 A Scope of delivery - SincoTec POWER FLOW BIAXIAL servo-hydraulic test stand - Hydraulic power unit - Control cabinet with industrial PC - Measurement and control technology - Technical documentation The machine is designed for up to 150 kN. The stated 125 kN refers to typical operating usage. Test stand weight: approx. 4.7 t Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical data and specifications!) For further questions, we will be happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Naprodaj: Sušilnik/sterilizator s toplim zrakom Chirana HS 62A Prodajam popolnoma delujoč sušilnik/sterilizator s toplim zrakom Chirana HS 62A. Naprava je primerna za sušenje, sterilizacijo ali temperaturno testiranje različnih materialov. Gre za robustno laboratorijsko enoto, izdelano v nekdanji Češkoslovaški, znano po svoji zanesljivosti in enostavni uporabi. Tehnične podrobnosti: Model: Chirana HS 62A Kovinska, dvostenska komora Precizna regulacija temperature Primeren za laboratorije, proizvodne obrate, servisne delavnice in tehnične službe Hfodpfx Ajxz Ah Deb Tjr Stanje: Naprava je v zelo dobrem tehničnem stanju in je pripravljena za takojšnjo uporabo. Cena: 300 EUR Lokacija: Ivanka pri Nitre

Stanje: dober (rabljeno), Stock number: 2938 Hfedsvcbu Aopfx Ab Tjr Manufacturer: Wolpert Year of manufacture: 1960 Model: Testor HAT 1E Test methods: Rockwell 150 kg, Brinell 250 kg (?) Table diameter: mm Throat depth: 125 mm Test height: 200 mm Accessories: Machine is supplied without table Weight: approx. 70 kg Machine dimensions: 200 x 400 x 700 mm Condition: good

Leto izdelave: 2013, Stanje: dober (rabljeno), Univerzalni preizkuševalni stroj Zwick/roll Tip: 1488 Posodobljen leta 2013 s programsko opremo Največja preskusna sila: 200 kN Hodpsxw N Uvefx Ab Tsfr Potreben prostor: Širina: 2.000 mm Višina: 2.100 mm Globina: 800 mm Teža pribl. 1.000 kg.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Tehnični podatki: Obratovalna napetost: 400V AC Največja varovalka: 16A Frekvenca: 50/60Hz Električna priključna moč: 3,4kW Temperaturno območje: +5°C nad sobno temperaturo do 300°C Prostorsko temperaturno odstopanje pri 150 °C: ± 3,8K Hfodoxzulnspfx Ab Tsr Časovno temperaturno odstopanje pri 150 °C: ± 0,7K Čas segrevanja na 150 °C: 29 min Obnovitveni čas po 30 s odprtih vratih pri 150 °C: 6 min Pretok zraka pri 150 °C: 18x/h Prostornina notranjosti: 400 l Največja obremenitev na polico: 35 kg Največja skupna obremenitev: 90 kg Poraba energije pri 150 °C: 1 200 Wh/h Največje število polic: 10 Zunanje mere: Širina: 1.235 mm Višina: 1.025 mm Globina: 765 mm Notranje mere: Širina: 1.000 mm Višina: 800 mm Globina: 510 mm

Stanje: rabljeno, SincoTec Type: POWER FLOW 100kN / 2000Nm Sincotec Power Flow 100 kN / 2000 Nm – Servo-hydraulic Test Stand – fully functional Description: For sale is a Sincotec Power Flow servo-hydraulic test stand from an industrial facility. This test system is ideally suited for dynamic and static testing of components and assemblies, e.g. in the automotive, mechanical engineering, or research sectors. Technical highlights: Max. test force: 100 kN (up to ±150 kN) Max. torque: ±2000 Nm (up to ±4000 Nm) Linear stroke: ±50 mm (max. ±75 mm) Max. angular displacement: ±50° Servo-hydraulic control Control via Sincotec TestPilot / CoPilot software Including large hydraulic power unit Dimensions & Test Stand Test table: approx. 1.20 × 1.00 × 1.20 m (H) Total stand height: approx. 3.30 m Hydraulic Power Unit (separate) Height: 2085 mm Length: 2714 mm Width: 1820 mm Fully functional prior to disassembly Power supply / electrics (from nameplates) Individual units / motors 230 V / 50 Hz Hfodpfox H Ndljx Ab Ter Leak oil pump: 0.18 kW / 1.5 A 400 V / 50 Hz (3-phase) Traverse: 0.25 kW / 0.79 A Total weight: approx. 3000 kg Important note: "The table shown in the photos is not included in the scope of delivery." Condition: used Scope of delivery: (see picture) (The above technical details are subject to change and error!) We would be happy to answer further questions by phone.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Tehnični podatki: Obratovalna napetost: 400V AC Maks. predvarovalka: 16A Frekvenca: 50/60Hz Električna priključna moč: 4,5kW Temperaturno območje: +12°C nad sobno temperaturo do 300°C Prostorsko temperaturno odstopanje pri 150 °C: ± 2,0K Časovno temperaturno odstopanje pri 150 °C: ± 0,6K Čas ogrevanja na 150 °C: 25 min Obnovitveni čas po 30 s odprtju vrat pri 150 °C: 6 min Menjava zraka pri 100 °C: 5x/h Prostornina notranjosti: 741 l Maksimalna obremenitev na eno polico: 45 kg Največja skupna obremenitev: 315 kg Poraba energije pri 150 °C: 800 Wh/h Maks. število polic: 16 Zunanje mere: Širina: 1.235 mm Višina: 1.025 mm Globina: 765 mm Hfedpfxexzukkj Ab Ter Notranje mere: Širina: 1.000 mm Višina: 800 mm Globina: 510 mm

Stanje: rabljeno, Erichsen 508 SAE Technical specifications for the test rig: Electro-pneumatically controlled multi-impact testing device with 3/4" connection for a stationary compressed air system, consisting of the following components: - Impact assembly with compressed air reservoir, pressure regulator for working pressure, and acceleration tube - Adjustable vibratory conveyor for feeding shot media - Control panel with main power switch, feed time adjustment, switch to initiate stone chip test, and multifunction display showing working pressure, test duration, feed time settings, and test counters (total/temporary) - Sample clamping device with adjustable impact angle Scope of delivery includes 1 kg shot material (gravel according to ASTM D 3170)* and operating manual. Power supply: 230 VAC / 50 Hz (other voltages available on request) Hfedpfx Abox Hx Srj Tor Weight (net/gross): approx. 100/195 kg Condition: used Scope of delivery: (see picture) (Specifications are subject to change and errors excepted!) For further questions, please do not hesitate to contact us by phone.

Stanje: rabljeno, Leto izdelave: 2022, LDS / Brüel & Kjær V780 Vibration Test System incl. HPA-K Amplifier – Vibration Testing Facility Description: For sale is a professional electrodynamic vibration testing system from LDS / Brüel & Kjær, consisting of the V780 shaker, HPA-K / 780 power amplifier, cooling fan, extensive accessories, and original documentation. The system is designed for precise vibration, environmental, and durability testing of components and assemblies, making it ideal for industrial, research, development, and quality assurance applications. The shaker allows testing from DC up to 4,000 Hz with sinusoidal or broadband excitations. Test specimens up to 100 kg can be mounted directly on the armature. Technical Highlights: - Max. sine force: 5,115 N - Frequency range: DC – 4,000 Hz - Max. test load: 100 kg - Amplifier power: 5 kVA - Total power consumption: 7.1 kVA - Power supply: 3-phase 380–500 V - Precise laboratory and industrial configuration - Genuine LDS / Brüel & Kjær quality Important Note: "The table shown in the photos is not included in the sale." Weight: Approx. 6,700 kg Condition: used Scope of Delivery: (see photos) Hedpfx Abjx Hx Nko Tsfr - LDS V780 shaker - HPA-K / 780 power amplifier - Cooling fan - Controller / Electronics - Cables, adapters, accessories (see photos) - Original manuals & documentation (Specifications and details subject to change and correction!) For further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Weiss Model: WK11-1000/40 Hfjdpfx Abjx Hxkzs Tor For sale: Professional climatic test chamber Weiss Umwelttechnik WT-WK 1000/40 with integrated Zander K-MT 2 steam humidifier unit. The unit is suitable for precise temperature and humidity testing of components, assemblies, and devices. Ideal for industrial applications, development, quality assurance, and research. Weiss climatic test chamber, water-cooled Temperature testing data: Temperature range: -40°C to +180°C Temporal temperature fluctuation in center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 2.0 K Temperature change rate: Heating: 4 K/min Cooling: 3 K/min Climate testing data: Temperature range: +10°C to +95°C Humidity range: 10 to 98 %rH Temporal temperature fluctuation in center of usable space: ± 0.1 to ± 0.3 K Spatial temperature deviation: ± 0.5 to ± 1 K Temporal humidity fluctuation in center of usable space: ± 1 to ± 3 %rH Heat compensation: In range +25°C to +95°C At up to 90% relative humidity: 500 W Humidification system data: Reservoir volume: 20 l Water quality: demineralized pH value: 6 to 7 Conductivity: 5 to 20 μS/cm3 Water consumption At constant +40°C, 92 %rH: 21/24 h Temperature gradient (according to IEC 60068-3-5): 1 to 2 K Test chamber dimensions: Height: 950 mm, Width: 1100 mm, Depth: 950 mm External dimensions: Height: 1980 mm, Width: 1385 mm, Depth: 1850 mm Test chamber capacity: approx. 990 liters Rated voltage: 3/N / PE AC 400 V + 10% 50 Hz Rated power: 11.5 kW, Rated current: 22.0 A Refrigerant: R 404A Weight: 840 kg Important safety information for buyers! The following procedures are carried out in advance on our offered chambers: 1. Function check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Stanje: zelo dobro (rabljeno), Vötsch Type: VT 7012 S2 Water-cooled Two-chamber design Hot chamber: The temperature range of the hot chamber is from +50°C to +220°C Temperature deviation over time at center of usable space: ±1 K Temperature deviation spatially: ±2 K Temperature change rate Heating: 11 K/min Cold chamber: The temperature range of the cold chamber is from -74.5°C to +70°C Temperature deviation over time at center of usable space: ±1 K Temperature deviation spatially: ±2 K Temperature change rate Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Temperature range hot chamber: +50°C to +220°C Temperature range cold chamber: -80°C to +70°C Internal dimensions (W x D x H): 470 mm x 650 mm x 410 mm External dimensions (W x D x H): 930 mm x 2115 mm x 1970+ mm Access port: ∅ 67 mm Voltage: 3/N/PE AC 400V +6/-10% 50Hz Rated power: 10 kW Rated current: 25 A Refrigerants: R-452A / R-23 Weight: 1000 kg For your security as a buyer, please note the following information! The following steps are carried out in advance for our offered chambers: 1. Function test and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) Hfsdpfx Absx Hhfhe Tor (Subject to change and error in technical data and details!) We will be happy to answer further questions by phone.

Stanje: zelo dobro (rabljeno), Vötsch Model: VC³ 7018 Vötsch Climate Test Chamber, Air-cooled Temperature Testing: Temperature range: -70°C to +180°C Temperature change rate: Heating 4 K/min Temperature change rate: Cooling 3 K/min Climate Testing: +10°C to +95°C Humidity range: 10% to 98% r.h. Temporal temperature deviation: ± 0.1 to ± 0.3 K Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm External dimensions: Width 870 mm x Depth 1550 mm x Height 1800 mm Hfsdpfx Aox Hg Uusb Tor Test chamber volume: 190 liters Nominal voltage: 400V Nominal current: 14 A Nominal power: 5.5 kW Heat compensation: 1500 W (at 20+) Weight: approx. 460 kg Important information for your security as a buyer: The following procedures are carried out on all chambers we offer prior to sale: 1. Function check and replacement of necessary components 2. If required, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Technical data and information subject to change or error!) If you have further questions, we would be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Vötsch Model: VT³ 7006 S2-M Water-cooled Technical Data: Maximum test specimen weight: 20 kg Hedpsx Hglyefx Ab Tsfr Test volume: 60 liters Test chamber dimensions: Width 380 mm, Depth 430 mm, Height 370 mm External dimensions: Width 875 mm, Depth 1970 mm, Height 1895 mm Vertical arrangement of hot and cold chambers (chamber switch via lift carriage) Temperature range of hot chamber: +50 °C to +220 °C (calibration value +125 °C) Temperature range of cold chamber: -80 °C to +70 °C (calibration value -40 °C) Uniform temperature distribution in the test chamber (±0.5 K to ±2.0 K) Temporal temperature deviation: ±0.3 K to ±1.0 K 80 mm tubing port for specimen measurement/supply SIMCONTROL software for operation and status display Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 8.5 kW · Rated current: 25 A Refrigerants: R-404A, R-23 Weight approx. 800 kg For your safety as a buyer, the following information! The following steps are carried out in advance on our offered chambers: 1. Function test and replacement of necessary components 2. New filling with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Subject to change and error in technical data and information!) If you have any further questions, we will gladly answer them by phone.

Stanje: zelo dobro (rabljeno), Thermo Scientific Vötsch Model: UT 6420 For sale: Professional laboratory and industrial drying oven / heating oven Thermo Scientific / Vötsch Industrietechnik – Model UT 6420. This unit is suitable for drying, heating, tempering, and thermal treatment of materials and components at precisely controlled temperatures up to 300 °C. Typical applications include laboratories, industry, workshops, research, electronics and material testing. Hjdjx Hf Uaopfx Ab Tofr The stainless steel inner chamber ensures uniform heat distribution and is designed for continuous operation. Interior: Stainless steel with adjustable shelves External dimensions approx.: 170 × 70 × 80 cm (H × W × D) Technical Data: Manufacturer: Thermo Scientific / Vötsch Industrietechnik Model: UT 6420 Max. temperature: 300 °C Temperature control: Electronic (Heraeus Kelvitron) Rated voltage: 3/N/PE 400 V, 50/60 Hz Rated current: 6.6 A Power consumption: approx. 4.2 kW Protection class: IP20 Weight approx.: 200–230 kg Condition: Used Scope of delivery: (See pictures) (Specifications subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Binder BINDER KB 720 Cooling Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device Description: For sale is a BINDER KB 720 (E6) cooling incubator, year 2022, equipped with the advanced safety and performance test package "P Plus". This unit is not a standard laboratory incubator but a high-end safety testing chamber specifically designed for aging, performance, and safety testing of lithium-ion energy storage systems. Special Advantage: The device is engineered to reliably detect, monitor, and safely contain critical battery events up to EUCAR Hazard Level 5 (fire/flames, no explosion). What can the unit do? (Section 2 – Performance & Application) - Conduct aging tests on lithium-ion cells - Performance testing (charge/discharge cycles under controlled temperature) - Continuous and cyclic temperature tests - Testing of both unpowered and cyclically powered cells - Reproducible, precise temperature control throughout the usable space - Safely perform tests under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage technology Suitable for: - Battery and cell manufacturers - Research and development laboratories - Test labs & safety assessments - Automotive / e-mobility / energy storage sectors The P Plus package turns the KB 720 into a true battery safety test chamber: Integrated safety functions: - Automatic & manual CO₂ fire suppression system - Fire detector with optical & acoustic alarm - Mechanical double-door locking (safe containment) - Spark protection inside the chamber - Exhaust connection with reversible overpressure valve - Ports for external inertization (e.g., nitrogen) - Emergency off/manual activation of extinguishing system Hfodpfex Hf A Rsx Ab Tsr - Cable ports for charging and measurement leads Result: The unit is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames may occur without causing an explosion or uncontrolled spread. Not an abuse or destructive testing device, but a safe, standards-compliant test chamber for realistic operational and fault scenarios. Core Technical Data: Temperature range: –5 °C to +100 °C Interior volume: approx. 698 liters Shelves: 4 × stainless steel Max. load per shelf: 45 kg Max. total load: 100 kg Electrical Data: Power supply: 200–240 V AC Frequency: 50/60 Hz Phase: single-phase Power consumption: approx. 2.1 kW Circuit protection: 16 A Refrigerant: R134a Protection class: IP 20 Dimensions & Weight: External (W × H × D): approx. 1250 × 1950 × 900 mm Internal (W × H × D): approx. 970 × 1250 × 576 mm Summary – Why this unit stands out: - Real battery safety test chamber - EUCAR Hazard Level 5 ready - Integrated CO₂ extinguishing system - Large chamber (≈700 L) - High market & resale appeal Weight: approx. 285–300 kg Condition: used Scope of delivery: (See image) (Technical data subject to change and error!) Further questions? Feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Dr. Hönle Dr. Hönle UV Technology – Bluepoint LED High-Power + Bluepoint 2 easycure – Complete System incl. LED Spots & Manuals For sale is a complete UV curing system from Dr. Hönle, consisting of two control units and several LED spots. Ideal for professional applications in electronics manufacturing, medical technology, optics, plastics processing, and laboratory operations. Description: The system includes: - Bluepoint LED High-Power control unit (REF 45250.c) - Bluepoint 2 easycure control unit (REF 33900.a) - Several UV LED spots (e.g., 365 nm, air-cooled) Hsdpfxox E T Uxj Ab Tofr - BP-LED 4-1 adapter (REF 45970.a) – for control of up to 4 spots - Original operating manuals + CD The equipment enables precise control of irradiation time, intensity, and energy – perfect for reproducible UV curing processes in industrial settings. Technical Data: Bluepoint LED High-Power (45250.c): - Supply: 36 V / 5.5 A - Controls up to 4 LED spots - Adjustable UV intensity - Timer programs and energy measurement Bluepoint 2 easycure (33900.a): - 230 V AC, 50 Hz - 570 VA power consumption - High-performance LED controller - Industrial quality, Made in Germany Dimensions / Total Weight: approx. 12–15 kg Important Note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see picture) - Bluepoint LED High-Power - Bluepoint 2 easycure - LED spots (air-cooled) - BP-LED 4-1 adapter - Operating manuals - CD - Original documentation (Changes and errors in technical specifications reserved!) If you have further questions, we are happy to answer them by phone.

Stanje: zelo dobro (rabljeno), CTS Type: T-40/600 Water-cooled Temperature Test Chamber Control System: - 32-bit controller - LCD control panel - Digital display for setpoint and actual values - Numeric input for setpoints - Error messages in plain text - RS 232 interface - Free switching channels for user-side test specimen control Technical Specifications Temperature Tests: Temperature range: -40 °C to +180 °C Temperature deviation: ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Cooling: 2.5 K/min Heat Dissipation: Approx. 2500 W at +20°C Approx. 2500 W at 0°C Approx. 1800 W at -40°C (Technical data refer to ambient temperature of +25°C, nominal voltage 400V, without test specimen, without irradiation and without additional equipment.) Dimensions: Test chamber volume: 600 liters Test chamber dimensions: height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: height approx. 1900 mm, width approx. 1120 mm, depth approx. 1875 mm Operating Data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Nominal power: 7.1 kW Nominal current: 12.3 A Protection class: IP 22 Weight: approx. 700 kg Refrigerant: R-452A / R23 Hsdpfxex E Tq Te Ab Tefr Weight: 700 kg For your safety as a buyer, please note the following information! The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Subject to changes and errors in technical data and information!) If you have any further questions, we will be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Vötsch Model: VT 7012 S2 Water-cooled Hot chamber: Temperature control range: +50°C to +220°C Temporal temperature deviation at chamber center: ± 1 K Spatial temperature deviation: ± 2 K Temperature change rate (Heating): 11 K/min Cold chamber: Temperature range: -80°C to +70°C Temporal temperature deviation at chamber center: ± 1 K Spatial temperature deviation: ± 2 K Temperature change rate (Heating): 2 K/min, (Cooling): 3 K/min Test chamber volume: 125 liters Temperature range hot chamber: +50°C to +220°C Temperature range cold chamber: -80°C to +70°C Test chamber dimensions: Width 470 mm, Depth 650 mm, Height 410 mm Hjdpfjx E Tkasx Ab Tjfr External dimensions: Width 930 mm, Depth 2115 mm, Height 1970+ mm Access port: Ø 67 mm Voltage: 3/N/PE AC 400V ±10% 50Hz Power rating: 10 kW Rated current: 25 A Refrigerant: R404A / R23 Weight: 1000 kg For your safety as a buyer, please note the following information! The following measures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data. All information is non-binding!) For further questions, we will be happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Vötsch Type: VCS³ 7034-5 Vötsch climate test chamber, water-cooled With a temperature change rate of 5 K/min Data for temperature testing: Temperature range: -70°C to +180°C Temporal temperature deviation at the center of the test space: ± 0.1 K to ± 0.5 K Spatial temperature deviation: ± 0.5 K to ± 2.0 K Temperature change rates: Heating: 6.8 K/min Cooling: 6.7 K/min Data for climatic test: Temperature range: +10°C to +95°C Temporal temperature deviation at the center of the test space: ± 0.1 K to ± 0.3 K Spatial temperature deviation: ± 0.5 K to ± 1.0 K Temporal humidity deviation at the center of the test space: ±1% to ±3% r.h. Humidity range: 10% to 98% r.h. (Extended climatic range: 2°C / 95% r.h. regulated for max 2 hrs) External dimensions: Width 870 x Depth 1700 x Height 1775 (mm) Test chamber dimensions: Width 580 x Depth 765 x Height 750 (mm) Test chamber volume: approx. 335 liters Side port: 50 mm Side port: 125 mm Operational data: LED strip 24 V, 6.8 W / 2 x halogen bulbs 24 V, 50 W Rated voltage: 3/N/PE AC 400 V±10 %, 50 Hz Rated power: 9 kW Rated current: 20 A Required site fuse: 63 A slow-blow Refrigerants: R404A/R-23 Weight: approx. 570 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components Hfsdex Elt Hspfx Ab Tor 2. Refill with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and specifications are reserved!) If you have any further questions, we would be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Weiss Model: WKL 64/40 For sale is a professional Weiss climate chamber. Air-cooled -40°C to 180°C with humidity control from 10% to 98% Chamber volume: 64 liters Internal dimensions: height 400 mm, width 470 mm, depth 345 mm External dimensions: height 1780 mm, width 760 mm, depth 800 mm Temperature change rate: Cooling: 5.0 K/min Heating: 3.5 K/min Temporal temperature fluctuation: ±0.3 K to ±1.0 K Temperature uniformity within chamber: ±0.5 K to ±2.0 K Maximum heat compensation: 800 W Climatic tests: Maximum temperature: +95 °C Hjdex Ek Uvspfx Ab Tofr Minimum temperature: +10 °C Dew point temperature range: 5.5 to 93.5°C Humidity range: 10 to 95% RH Humidity stability, after stabilization and depending on climatic values: ±1 to ±3 % RH timely Temperature deviation over time, under steady-state conditions, depending on temperature: ±0.3 K to ±0.5 K Temperature uniformity in chamber, depending on set value: ±0.5 K to ±1.5 K Rated power: 1.8 KW, rated current: 8.0 A Mains voltage: 1/N/PE AC 230V ±10% / 50Hz Refrigerant: R-404A, 0.8 kg Weight: 120 kg Important Note: "The table shown in the photos is not included in the sale." For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilled with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a trial run, monitored with calibrated equipment. Condition: used Scope of delivery: (See picture) (Technical specifications subject to change and errors excepted!) If you have any further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), CTS Model: C-40/350 Climate Test Chamber, Air-Cooled For sale is a professional CTS climate test chamber, model C-40/350. This unit is designed for demanding environmental simulations in industrial applications and is ideal for materials testing, electronics, automotive, aerospace, and research sectors. Temperature Testing: - Temperature range: -40°C to +180°C - Temperature deviation: ≤ ±0.3 K (over time) - Temperature change rate according to IEC 60068-3-5: - Heating: 3.5 K/min - Cooling: 4 K/min - Heat compensation: - Approx. 3500 W at +20°C - Approx. 2000 W at -20°C Climate Testing: - Temperature range: +10°C to +90°C - Humidity range: 10% to 95% relative humidity - Dew point range: +5°C to +78°C - Temperature deviation: ≤ 1.0 K (over time) - Humidity deviation: ≤ ±3.0% r.h. (over time) The technical data refer to an ambient temperature of +25°C, rated voltage of 400V, without test specimen, heat compensation or additional equipment. Options may affect performance data. Technical Specifications: - Refrigeration unit: air-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, eco-friendly refrigerant R404A - Test chamber floor load capacity: 150 kg/m² - Shelf: stainless steel - Shelf area: 620 x 600 mm - Max load per shelf: 35 kg - Max total load with full shelf configuration: 100 kg Control System: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numeric input for set values - Error messages in clear text - RS 232 interface - Ethernet interface - Free switching channels for customer-specific test sample control Dimensions: - Test volume: 350 litres - Internal dimensions (H x W x D): 750 x 650 x 720 mm - External dimensions (H x W x D): 1800 x 850 x 1640 mm Hfodpfxsx Ekupo Ab Tsr Operating Data: - Electrical connection: 400V 3/N, 50 Hz - Rated power: 7.1 kW - Rated current: 11.5 A - Protection class: IP 54 - Sound pressure level: (data not specified)